arm64: dts: ti: k3-am64-mcu: remove incorrect UART base clock rates

We found that (at least some versions of) the sci-fw set the base clock
rate for UARTs in the MCU domain to 96 MHz instead of the expected 48 MHz,
leading to incorrect baud rates when used from Linux.

As the 8250_omap driver will query the actual clock rate from the clk
driver when clock-frequency is unset, removing the incorrect property is
sufficient to fix the baud rate.

Fixes: 8abae9389bdb ("arm64: dts: ti: Add support for AM642 SoC")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20220419075157.189347-1-matthias.schiffer@ew.tq-group.com

diff --git a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
index 2bb5c9ff172c9b09db3f7570429cb41744f60d08..02d4285acbb8d7c3d1d8462334d358758e5f7501 100644 (file)
--- a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
@@ -10,7 +10,6 @@
                compatible = "ti,am64-uart", "ti,am654-uart";
                reg = <0x00 0x04a00000 0x00 0x100>;
                interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
-               clock-frequency = <48000000>;
                current-speed = <115200>;
                power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
                clocks = <&k3_clks 149 0>;
@@ -21,7 +20,6 @@
                compatible = "ti,am64-uart", "ti,am654-uart";
                reg = <0x00 0x04a10000 0x00 0x100>;
                interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
-               clock-frequency = <48000000>;
                current-speed = <115200>;
                power-domains = <&k3_pds 160 TI_SCI_PD_EXCLUSIVE>;
                clocks = <&k3_clks 160 0>;