iio: adc: nau7802: convert probe to full device-managed

This is a trivial conversion to device-managed functions.
The mutex_destroy() calls are redundant, as the data will be free'd anyway.

And the IRQ and IIO register functions both have device-managed
equivalents.

Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210926154932.3287590-1-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

diff --git a/drivers/iio/adc/nau7802.c b/drivers/iio/adc/nau7802.c
index bb70b51d25b13255911946295bb835e011c2c4c7..976c235f307974bd390a70a25f82da622dde88c9 100644 (file)
--- a/drivers/iio/adc/nau7802.c
+++ b/drivers/iio/adc/nau7802.c
@@ -428,8 +428,6 @@ static int nau7802_probe(struct i2c_client *client,
 
        st = iio_priv(indio_dev);
 
-       i2c_set_clientdata(client, indio_dev);
-
        indio_dev->name = dev_name(&client->dev);
        indio_dev->modes = INDIO_DIRECT_MODE;
        indio_dev->info = &nau7802_info;
@@ -495,13 +493,13 @@ static int nau7802_probe(struct i2c_client *client,
         * will enable them back when we will need them..
         */
        if (client->irq) {
-               ret = request_threaded_irq(client->irq,
-                               NULL,
-                               nau7802_eoc_trigger,
-                               IRQF_TRIGGER_HIGH | IRQF_ONESHOT |
-                               IRQF_NO_AUTOEN,
-                               client->dev.driver->name,
-                               indio_dev);
+               ret = devm_request_threaded_irq(&client->dev, client->irq,
+                                               NULL,
+                                               nau7802_eoc_trigger,
+                                               IRQF_TRIGGER_HIGH | IRQF_ONESHOT |
+                                               IRQF_NO_AUTOEN,
+                                               client->dev.driver->name,
+                                               indio_dev);
                if (ret) {
                        /*
                         * What may happen here is that our IRQ controller is
@@ -526,7 +524,7 @@ static int nau7802_probe(struct i2c_client *client,
                ret = i2c_smbus_write_byte_data(st->client, NAU7802_REG_CTRL2,
                                          NAU7802_CTRL2_CRS(st->sample_rate));
                if (ret)
-                       goto error_free_irq;
+                       return ret;
        }
 
        /* Setup the ADC channels available on the board */
@@ -536,36 +534,7 @@ static int nau7802_probe(struct i2c_client *client,
        mutex_init(&st->lock);
        mutex_init(&st->data_lock);
 
-       ret = iio_device_register(indio_dev);
-       if (ret < 0) {
-               dev_err(&client->dev, "Couldn't register the device.\n");
-               goto error_device_register;
-       }
-
-       return 0;
-
-error_device_register:
-       mutex_destroy(&st->lock);
-       mutex_destroy(&st->data_lock);
-error_free_irq:
-       if (client->irq)
-               free_irq(client->irq, indio_dev);
-
-       return ret;
-}
-
-static int nau7802_remove(struct i2c_client *client)
-{
-       struct iio_dev *indio_dev = i2c_get_clientdata(client);
-       struct nau7802_state *st = iio_priv(indio_dev);
-
-       iio_device_unregister(indio_dev);
-       mutex_destroy(&st->lock);
-       mutex_destroy(&st->data_lock);
-       if (client->irq)
-               free_irq(client->irq, indio_dev);
-
-       return 0;
+       return devm_iio_device_register(&client->dev, indio_dev);
 }
 
 static const struct i2c_device_id nau7802_i2c_id[] = {
@@ -582,7 +551,6 @@ MODULE_DEVICE_TABLE(of, nau7802_dt_ids);
 
 static struct i2c_driver nau7802_driver = {
        .probe = nau7802_probe,
-       .remove = nau7802_remove,
        .id_table = nau7802_i2c_id,
        .driver = {
                   .name = "nau7802",