ARM: dts: imx53-m53evk: Use #pwm-cells = <3> for imx27-pwm device

The binding dictates using 3 pwm-cells. Adhere to that.

This fixes the following dtbs_check warning:

	arch/arm/boot/dts/nxp/imx/imx53-m53evk.dtb: pwm@53fb4000: #pwm-cells:0:0: 3 was expected
		from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/nxp/imx/imx53-m53evk.dts b/arch/arm/boot/dts/nxp/imx/imx53-m53evk.dts
index c323b4dbe9f0adf26b46738d94aea3ce2d2455e6..1353d985969cbb2b28e45475de7560df5efd9e6b 100644 (file)
--- a/arch/arm/boot/dts/nxp/imx/imx53-m53evk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx53-m53evk.dts
@@ -41,7 +41,7 @@
 
        backlight {
                compatible = "pwm-backlight";
-               pwms = <&pwm1 0 3000>;
+               pwms = <&pwm1 0 3000 0>;
                brightness-levels = <0 4 8 16 32 64 128 255>;
                default-brightness-level = <6>;
                power-supply = <&reg_backlight>;
@@ -313,7 +313,6 @@
 };
 
 &pwm1 {
-       #pwm-cells = <2>;
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_pwm1>;
        status = "okay";