dt-bindings:iio:imu:invensense,mpu6050: txt to yaml conversion

As Rob Herring suggested, this no long requires the explicit
i2c-gate binding, but instead just used i2c-controller.yaml
directly.

2 prior examples combinded into one as a single example can show
all of the binding elements as long as the right part is selected.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20201128173343.390165-3-jic23@kernel.org

diff --git a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
deleted file mode 100644 (file)
index f2f6474..0000000
--- a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-InvenSense MPU-6050 Six-Axis (Gyro + Accelerometer) MEMS MotionTracking Device
-
-http://www.invensense.com/mems/gyro/mpu6050.html
-
-Required properties:
- - compatible : should be one of
-               "invensense,mpu6000"
-               "invensense,mpu6050"
-               "invensense,mpu6500"
-               "invensense,mpu6515"
-               "invensense,mpu9150"
-               "invensense,mpu9250"
-               "invensense,mpu9255"
-               "invensense,icm20608"
-               "invensense,icm20609"
-               "invensense,icm20689"
-               "invensense,icm20602"
-               "invensense,icm20690"
-               "invensense,iam20680"
- - reg : the I2C address of the sensor
- - interrupts: interrupt mapping for IRQ. It should be configured with flags
-   IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or
-   IRQ_TYPE_EDGE_FALLING.
-
-  Refer to interrupt-controller/interrupts.txt for generic interrupt client node
-  bindings.
-
-Optional properties:
- - vdd-supply: regulator phandle for VDD supply
- - vddio-supply: regulator phandle for VDDIO supply
- - mount-matrix: an optional 3x3 mounting rotation matrix
- - i2c-gate node.  These devices also support an auxiliary i2c bus.  This is
-   simple enough to be described using the i2c-gate binding. See
-   i2c/i2c-gate.txt for more details.
-
-Example:
-       mpu6050@68 {
-               compatible = "invensense,mpu6050";
-               reg = <0x68>;
-               interrupt-parent = <&gpio1>;
-               interrupts = <18 IRQ_TYPE_EDGE_RISING>;
-               mount-matrix = "-0.984807753012208",  /* x0 */
-                              "0",                   /* y0 */
-                              "-0.173648177666930",  /* z0 */
-                              "0",                   /* x1 */
-                              "-1",                  /* y1 */
-                              "0",                   /* z1 */
-                              "-0.173648177666930",  /* x2 */
-                              "0",                   /* y2 */
-                              "0.984807753012208";   /* z2 */
-       };
-
-
-       mpu9250@68 {
-               compatible = "invensense,mpu9250";
-               reg = <0x68>;
-               interrupt-parent = <&gpio3>;
-               interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
-               i2c-gate {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       ax8975@c {
-                               compatible = "ak,ak8975";
-                               reg = <0x0c>;
-                       };
-               };
-       };

diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
new file mode 100644 (file)
index 0000000..9268b6c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/invensense,mpu6050.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: InvenSense MPU-6050 Six-Axis (Gyro + Accelerometer) MEMS MotionTracking Device
+
+maintainers:
+  - Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
+
+description: |
+  These devices support both I2C and SPI bus interfaces.
+
+properties:
+  compatible:
+    enum:
+      - invensense,iam20680
+      - invensense,icm20608
+      - invensense,icm20609
+      - invensense,icm20689
+      - invensense,icm20602
+      - invensense,icm20690
+      - invensense,mpu6000
+      - invensense,mpu6050
+      - invensense,mpu6500
+      - invensense,mpu6515
+      - invensense,mpu9150
+      - invensense,mpu9250
+      - invensense,mpu9255
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  spi-max-frequency: true
+
+  vdd-supply: true
+  vddio-supply: true
+
+  mount-matrix: true
+
+  i2c-gate:
+    $ref: /schemas/i2c/i2c-controller.yaml
+    unevaluatedProperties: false
+    description: |
+      These devices also support an auxiliary i2c bus via an i2c-gate.
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - invensense,mpu9150
+                - invensense,mpu9250
+                - invensense,mpu9255
+    then:
+      properties:
+        i2c-gate: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imu@68 {
+            compatible = "invensense,mpu9250";
+            reg = <0x68>;
+            interrupt-parent = <&gpio3>;
+            interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
+            mount-matrix = "-0.984807753012208",  /* x0 */
+                           "0",                   /* y0 */
+                           "-0.173648177666930",  /* z0 */
+                           "0",                   /* x1 */
+                           "-1",                  /* y1 */
+                           "0",                   /* z1 */
+                           "-0.173648177666930",  /* x2 */
+                           "0",                   /* y2 */
+                           "0.984807753012208";   /* z2 */
+            i2c-gate {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                magnetometer@c {
+                    compatible = "ak,ak8975";
+                    reg = <0x0c>;
+                };
+            };
+        };
+    };
+...