Bluetooth controllers share the common local-bd-address property.
Add a generic YAML schema to replace bluetooth.txt for those.
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
+++ /dev/null
-The following properties are common to the Bluetooth controllers:
-
-- local-bd-address: array of 6 bytes, specifies the BD address that was
- uniquely assigned to the Bluetooth device, formatted with least significant
- byte first (little-endian).
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/bluetooth/bluetooth-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bluetooth Controller Generic Binding
+
+maintainers:
+ - Marcel Holtmann <marcel@holtmann.org>
+ - Johan Hedberg <johan.hedberg@gmail.com>
+ - Luiz Augusto von Dentz <luiz.dentz@gmail.com>
+
+properties:
+ $nodename:
+ pattern: "^bluetooth(@.*)?$"
+
+ local-bd-address:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ maxItems: 6
+ description:
+ Specifies the BD address that was uniquely assigned to the Bluetooth
+ device. Formatted with least significant byte first (little-endian), e.g.
+ in order to assign the address 00:11:22:33:44:55 this property must have
+ the value [55 44 33 22 11 00].
+
+additionalProperties: true
+
+...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/bluetooth/qualcomm-bluetooth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Bluetooth Chips
+
+maintainers:
+ - Balakrishna Godavarthi <bgodavar@codeaurora.org>
+ - Rocky Liao <rjliao@codeaurora.org>
+
+description:
+ This binding describes Qualcomm UART-attached bluetooth chips.
+
+properties:
+ compatible:
+ enum:
+ - qcom,qca6174-bt
+ - qcom,qca9377-bt
+ - qcom,wcn3990-bt
+ - qcom,wcn3991-bt
+ - qcom,wcn3998-bt
+ - qcom,qca6390-bt
+ - qcom,wcn6750-bt
+
+ enable-gpios:
+ maxItems: 1
+ description: gpio specifier used to enable chip
+
+ swctrl-gpios:
+ maxItems: 1
+ description: gpio specifier is used to find status
+ of clock supply to SoC
+
+ clocks:
+ maxItems: 1
+ description: clock provided to the controller (SUSCLK_32KHZ)
+
+ vddio-supply:
+ description: VDD_IO supply regulator handle
+
+ vddxo-supply:
+ description: VDD_XO supply regulator handle
+
+ vddrf-supply:
+ description: VDD_RF supply regulator handle
+
+ vddch0-supply:
+ description: VDD_CH0 supply regulator handle
+
+ vddaon-supply:
+ description: VDD_AON supply regulator handle
+
+ vddbtcxmx-supply:
+ description: VDD_BT_CXMX supply regulator handle
+
+ vddrfacmn-supply:
+ description: VDD_RFA_CMN supply regulator handle
+
+ vddrfa0p8-supply:
+ description: VDD_RFA_0P8 suppply regulator handle
+
+ vddrfa1p7-supply:
+ description: VDD_RFA_1P7 supply regulator handle
+
+ vddrfa1p2-supply:
+ description: VDD_RFA_1P2 supply regulator handle
+
+ vddrfa2p2-supply:
+ description: VDD_RFA_2P2 supply regulator handle
+
+ vddasd-supply:
+ description: VDD_ASD supply regulator handle
+
+ max-speed:
+ description: see Documentation/devicetree/bindings/serial/serial.yaml
+
+ firmware-name:
+ description: specify the name of nvm firmware to load
+
+ local-bd-address: true
+
+
+required:
+ - compatible
+
+additionalProperties: false
+
+allOf:
+ - $ref: bluetooth-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,qca6174-bt
+ then:
+ required:
+ - enable-gpios
+ - clocks
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,wcn3990-bt
+ - qcom,wcn3991-bt
+ - qcom,wcn3998-bt
+ then:
+ required:
+ - vddio-supply
+ - vddxo-supply
+ - vddrf-supply
+ - vddch0-supply
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,wcn6750-bt
+ then:
+ required:
+ - enable-gpios
+ - swctrl-gpios
+ - vddio-supply
+ - vddaon-supply
+ - vddbtcxmx-supply
+ - vddrfacmn-supply
+ - vddrfa0p8-supply
+ - vddrfa1p7-supply
+ - vddrfa1p2-supply
+ - vddasd-supply
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ serial {
+
+ bluetooth {
+ compatible = "qcom,qca6174-bt";
+ enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+ clocks = <&divclk4>;
+ firmware-name = "nvm_00440302.bin";
+ };
+ };
+ - |
+ serial {
+
+ bluetooth {
+ compatible = "qcom,wcn3990-bt";
+ vddio-supply = <&vreg_s4a_1p8>;
+ vddxo-supply = <&vreg_l7a_1p8>;
+ vddrf-supply = <&vreg_l17a_1p3>;
+ vddch0-supply = <&vreg_l25a_3p3>;
+ max-speed = <3200000>;
+ firmware-name = "crnv21.bin";
+ };
+ };
+ - |
+ serial {
+
+ bluetooth {
+ compatible = "qcom,wcn6750-bt";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_en_default>;
+ enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+ swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+ vddio-supply = <&vreg_l19b_1p8>;
+ vddaon-supply = <&vreg_s7b_0p9>;
+ vddbtcxmx-supply = <&vreg_s7b_0p9>;
+ vddrfacmn-supply = <&vreg_s7b_0p9>;
+ vddrfa0p8-supply = <&vreg_s7b_0p9>;
+ vddrfa1p7-supply = <&vreg_s1b_1p8>;
+ vddrfa1p2-supply = <&vreg_s8b_1p2>;
+ vddrfa2p2-supply = <&vreg_s1c_2p2>;
+ vddasd-supply = <&vreg_l11c_2p8>;
+ max-speed = <3200000>;
+ firmware-name = "msnv11.bin";
+ };
+ };
+++ /dev/null
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/net/qualcomm-bluetooth.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Bluetooth Chips
-
-maintainers:
- - Balakrishna Godavarthi <bgodavar@codeaurora.org>
- - Rocky Liao <rjliao@codeaurora.org>
-
-description:
- This binding describes Qualcomm UART-attached bluetooth chips.
-
-properties:
- compatible:
- enum:
- - qcom,qca6174-bt
- - qcom,qca9377-bt
- - qcom,wcn3990-bt
- - qcom,wcn3991-bt
- - qcom,wcn3998-bt
- - qcom,qca6390-bt
- - qcom,wcn6750-bt
-
- enable-gpios:
- maxItems: 1
- description: gpio specifier used to enable chip
-
- swctrl-gpios:
- maxItems: 1
- description: gpio specifier is used to find status
- of clock supply to SoC
-
- clocks:
- maxItems: 1
- description: clock provided to the controller (SUSCLK_32KHZ)
-
- vddio-supply:
- description: VDD_IO supply regulator handle
-
- vddxo-supply:
- description: VDD_XO supply regulator handle
-
- vddrf-supply:
- description: VDD_RF supply regulator handle
-
- vddch0-supply:
- description: VDD_CH0 supply regulator handle
-
- vddaon-supply:
- description: VDD_AON supply regulator handle
-
- vddbtcxmx-supply:
- description: VDD_BT_CXMX supply regulator handle
-
- vddrfacmn-supply:
- description: VDD_RFA_CMN supply regulator handle
-
- vddrfa0p8-supply:
- description: VDD_RFA_0P8 suppply regulator handle
-
- vddrfa1p7-supply:
- description: VDD_RFA_1P7 supply regulator handle
-
- vddrfa1p2-supply:
- description: VDD_RFA_1P2 supply regulator handle
-
- vddrfa2p2-supply:
- description: VDD_RFA_2P2 supply regulator handle
-
- vddasd-supply:
- description: VDD_ASD supply regulator handle
-
- max-speed:
- description: see Documentation/devicetree/bindings/serial/serial.yaml
-
- firmware-name:
- description: specify the name of nvm firmware to load
-
- local-bd-address:
- description: see Documentation/devicetree/bindings/net/bluetooth.txt
-
-
-required:
- - compatible
-
-additionalProperties: false
-
-allOf:
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,qca6174-bt
- then:
- required:
- - enable-gpios
- - clocks
-
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,wcn3990-bt
- - qcom,wcn3991-bt
- - qcom,wcn3998-bt
- then:
- required:
- - vddio-supply
- - vddxo-supply
- - vddrf-supply
- - vddch0-supply
-
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,wcn6750-bt
- then:
- required:
- - enable-gpios
- - swctrl-gpios
- - vddio-supply
- - vddaon-supply
- - vddbtcxmx-supply
- - vddrfacmn-supply
- - vddrfa0p8-supply
- - vddrfa1p7-supply
- - vddrfa1p2-supply
- - vddasd-supply
-
-examples:
- - |
- #include <dt-bindings/gpio/gpio.h>
- serial {
-
- bluetooth {
- compatible = "qcom,qca6174-bt";
- enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
- clocks = <&divclk4>;
- firmware-name = "nvm_00440302.bin";
- };
- };
- - |
- serial {
-
- bluetooth {
- compatible = "qcom,wcn3990-bt";
- vddio-supply = <&vreg_s4a_1p8>;
- vddxo-supply = <&vreg_l7a_1p8>;
- vddrf-supply = <&vreg_l17a_1p3>;
- vddch0-supply = <&vreg_l25a_3p3>;
- max-speed = <3200000>;
- firmware-name = "crnv21.bin";
- };
- };
- - |
- serial {
-
- bluetooth {
- compatible = "qcom,wcn6750-bt";
- pinctrl-names = "default";
- pinctrl-0 = <&bt_en_default>;
- enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
- swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
- vddio-supply = <&vreg_l19b_1p8>;
- vddaon-supply = <&vreg_s7b_0p9>;
- vddbtcxmx-supply = <&vreg_s7b_0p9>;
- vddrfacmn-supply = <&vreg_s7b_0p9>;
- vddrfa0p8-supply = <&vreg_s7b_0p9>;
- vddrfa1p7-supply = <&vreg_s1b_1p8>;
- vddrfa1p2-supply = <&vreg_s8b_1p2>;
- vddrfa2p2-supply = <&vreg_s1c_2p2>;
- vddasd-supply = <&vreg_l11c_2p8>;
- max-speed = <3200000>;
- firmware-name = "msnv11.bin";
- };
- };
bluetooth:
type: object
additionalProperties: false
+ allOf:
+ - $ref: /schemas/net/bluetooth/bluetooth-controller.yaml#
properties:
compatible:
const: qcom,wcnss-bt
- local-bd-address:
- $ref: /schemas/types.yaml#/definitions/uint8-array
- maxItems: 6
- description:
- See Documentation/devicetree/bindings/net/bluetooth.txt
+ local-bd-address: true
required:
- compatible
projects / linux.git / commitdiff