dt-bindings: pinctrl: qcom,msm8226: use common TLMM schema

Reference common Qualcomm TLMM pin controller schema, to bring common
properties, other pinctrl schemas and additional checks, like function
required only for GPIOs.

Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221016170035.35014-16-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
index ecb90c77f6665b0e01920afdb3ba07405b94c27a..8e634d07eb67d1cd19beb61a60b82a8e19739804 100644 (file)
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
@@ -21,26 +21,12 @@ properties:
     description: Specifies the base address and size of the TLMM register space
     maxItems: 1
 
-  interrupts:
-    description: Specifies the TLMM summary IRQ
-    maxItems: 1
-
+  interrupts: true
   interrupt-controller: true
-
-  '#interrupt-cells':
-    description: Specifies the PIN numbers and Flags, as defined in
-      include/dt-bindings/interrupt-controller/irq.h
-    const: 2
-
+  "#interrupt-cells": true
   gpio-controller: true
-
-  '#gpio-cells':
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
+  "#gpio-cells": true
+  gpio-ranges: true
 
   gpio-reserved-ranges:
     maxItems: 1
@@ -60,7 +46,7 @@ $defs:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: "/schemas/pinctrl/pincfg-node.yaml"
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
 
     properties:
       pins:
@@ -83,17 +69,12 @@ $defs:
                 blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2,
                 blsp_uart3, blsp_uart5, cam_mclk0, cam_mclk1, wlan ]
 
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
-
       bias-pull-down: true
 
       bias-pull-up: true
 
       bias-disable: true
+      drive-strength: true
 
       output-high: true
 
@@ -101,22 +82,15 @@ $defs:
 
     required:
       - pins
-      - function
 
     additionalProperties: false
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
 required:
   - compatible
   - reg
-  - interrupts
-  - interrupt-controller
-  - '#interrupt-cells'
-  - gpio-controller
-  - '#gpio-cells'
-  - gpio-ranges
 
 additionalProperties: false