ARM: dts: imx: Add missing LVDS decoder on M53Menlo

[ Upstream commit 0c6f71176ea43d6f4003a4d57f7bb518c5ad6145 ]

The M53Menlo display unit uses an LVDS-to-DPI bridge, TI DS90CF364A.
Describe this bridge in DT, otherwise the DT incorrectly describes
DPI panel attached directly to LVDS source.

Fixes: 716be61d1869 ("ARM: dts: imx53: Add Menlosystems M53 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts
index 4f88e96d81ddbdd42078409d0a94e43f3e194566..d5c68d1ea707c6610ff1ef2b1c3bb9883ad5e803 100644 (file)
--- a/arch/arm/boot/dts/imx53-m53menlo.dts
+++ b/arch/arm/boot/dts/imx53-m53menlo.dts
@@ -53,6 +53,31 @@
                };
        };
 
+       lvds-decoder {
+               compatible = "ti,ds90cf364a", "lvds-decoder";
+
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       port@0 {
+                               reg = <0>;
+
+                               lvds_decoder_in: endpoint {
+                                       remote-endpoint = <&lvds0_out>;
+                               };
+                       };
+
+                       port@1 {
+                               reg = <1>;
+
+                               lvds_decoder_out: endpoint {
+                                       remote-endpoint = <&panel_in>;
+                               };
+                       };
+               };
+       };
+
        panel {
                compatible = "edt,etm0700g0dh6";
                pinctrl-0 = <&pinctrl_display_gpio>;
@@ -61,7 +86,7 @@
 
                port {
                        panel_in: endpoint {
-                               remote-endpoint = <&lvds0_out>;
+                               remote-endpoint = <&lvds_decoder_out>;
                        };
                };
        };
@@ -450,7 +475,7 @@
                        reg = <2>;
 
                        lvds0_out: endpoint {
-                               remote-endpoint = <&panel_in>;
+                               remote-endpoint = <&lvds_decoder_in>;
                        };
                };
        };