wifi: brcmfmac: Replace default (not configured) MAC with a random MAC

On some boards there is no eeprom to hold the nvram, in this case instead
a board specific nvram is loaded from /lib/firmware. On most boards the
macaddr=... setting in the /lib/firmware nvram file is ignored because
the wifi/bt chip has a unique MAC programmed into the chip itself.

But in some cases the actual MAC from the /lib/firmware nvram file gets
used, leading to MAC conflicts.

The MAC addresses in the troublesome nvram files seem to all come from
the same nvram file template, so we can detect this by checking for
the template nvram file MAC.

Detect that the default MAC address is being used and replace it
with a random MAC address to avoid MAC address conflicts.

Note that udev will detect this is a random MAC based on
/sys/class/net/wlan0/addr_assign_type and then replace this with
a MAC based on hashing the netdev-name + the machine-id. So that
the MAC address is both guaranteed to be unique per machine while
it is still the same/persistent at each boot (assuming the
default Link.MACAddressPolicy=persistent udev setting).

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220708133712.102179-2-hdegoede@redhat.com

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
index dccd8f4ca1d0c914ac733890c11922dcb8b23c40..7485e784be2a08a3764d8665ae9b8462f5096e25 100644 (file)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
@@ -201,6 +201,20 @@ int brcmf_c_set_cur_etheraddr(struct brcmf_if *ifp, const u8 *addr)
        return err;
 }
 
+/* On some boards there is no eeprom to hold the nvram, in this case instead
+ * a board specific nvram is loaded from /lib/firmware. On most boards the
+ * macaddr setting in the /lib/firmware nvram file is ignored because the
+ * wifibt chip has a unique MAC programmed into the chip itself.
+ * But in some cases the actual MAC from the /lib/firmware nvram file gets
+ * used, leading to MAC conflicts.
+ * The MAC addresses in the troublesome nvram files seem to all come from
+ * the same nvram file template, so we only need to check for 1 known
+ * address to detect this.
+ */
+static const u8 brcmf_default_mac_address[ETH_ALEN] = {
+       0x00, 0x90, 0x4c, 0xc5, 0x12, 0x38
+};
+
 int brcmf_c_preinit_dcmds(struct brcmf_if *ifp)
 {
        struct brcmf_pub *drvr = ifp->drvr;
@@ -226,6 +240,15 @@ int brcmf_c_preinit_dcmds(struct brcmf_if *ifp)
                        bphy_err(drvr, "Retrieving cur_etheraddr failed, %d\n", err);
                        goto done;
                }
+
+               if (ether_addr_equal_unaligned(ifp->mac_addr, brcmf_default_mac_address)) {
+                       bphy_err(drvr, "Default MAC is used, replacing with random MAC to avoid conflicts\n");
+                       eth_random_addr(ifp->mac_addr);
+                       ifp->ndev->addr_assign_type = NET_ADDR_RANDOM;
+                       err = brcmf_c_set_cur_etheraddr(ifp, ifp->mac_addr);
+                       if (err < 0)
+                               goto done;
+               }
        }
 
        memcpy(ifp->drvr->mac, ifp->mac_addr, sizeof(ifp->drvr->mac));