[PATCH] skge: pause mapping for fiber

Do correct mapping of pause and duplex when using 1000BaseX fiber
versions of the board.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 57764935a9f85cc14b83aa46d39fe13244d87441..c19f49bce7af41678b4ef58a16e4e8344a26b313 100644 (file)
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -197,8 +197,8 @@ static u32 skge_supported_modes(const struct skge_hw *hw)
                else if (hw->chip_id == CHIP_ID_YUKON)
                        supported &= ~SUPPORTED_1000baseT_Half;
        } else
-               supported = SUPPORTED_1000baseT_Full | SUPPORTED_FIBRE
-                       | SUPPORTED_Autoneg;
+               supported = SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half
+                       | SUPPORTED_FIBRE | SUPPORTED_Autoneg;
 
        return supported;
 }
@@ -1018,6 +1018,14 @@ static const u16 phy_pause_map[] = {
        [FLOW_MODE_REM_SEND]  = PHY_AN_PAUSE_CAP | PHY_AN_PAUSE_ASYM,
 };
 
+/* special defines for FIBER (88E1011S only) */
+static const u16 fiber_pause_map[] = {
+       [FLOW_MODE_NONE]        = PHY_X_P_NO_PAUSE,
+       [FLOW_MODE_LOC_SEND]    = PHY_X_P_ASYM_MD,
+       [FLOW_MODE_SYMMETRIC]   = PHY_X_P_SYM_MD,
+       [FLOW_MODE_REM_SEND]    = PHY_X_P_BOTH_MD,
+};
+
 
 /* Check status of Broadcom phy link */
 static void bcom_check_link(struct skge_hw *hw, int port)
@@ -1207,17 +1215,7 @@ static void xm_phy_init(struct skge_port *skge)
                if (skge->advertising & ADVERTISED_1000baseT_Full)
                        ctrl |= PHY_X_AN_FD;
 
-               switch(skge->flow_control) {
-               case FLOW_MODE_NONE:
-                       ctrl |= PHY_X_P_NO_PAUSE;
-                       break;
-               case FLOW_MODE_LOC_SEND:
-                       ctrl |= PHY_X_P_ASYM_MD;
-                       break;
-               case FLOW_MODE_SYMMETRIC:
-                       ctrl |= PHY_X_P_BOTH_MD;
-                       break;
-               }
+               ctrl |= fiber_pause_map[skge->flow_control];
 
                xm_phy_write(hw, port, PHY_XMAC_AUNE_ADV, ctrl);
 
@@ -1796,11 +1794,17 @@ static void yukon_init(struct skge_hw *hw, int port)
                                adv |= PHY_M_AN_10_FD;
                        if (skge->advertising & ADVERTISED_10baseT_Half)
                                adv |= PHY_M_AN_10_HD;
-               } else  /* special defines for FIBER (88E1011S only) */
-                       adv |= PHY_M_AN_1000X_AHD | PHY_M_AN_1000X_AFD;
 
-               /* Set Flow-control capabilities */
-               adv |= phy_pause_map[skge->flow_control];
+                       /* Set Flow-control capabilities */
+                       adv |= phy_pause_map[skge->flow_control];
+               } else {
+                       if (skge->advertising & ADVERTISED_1000baseT_Full)
+                               adv |= PHY_M_AN_1000X_AFD;
+                       if (skge->advertising & ADVERTISED_1000baseT_Half)
+                               adv |= PHY_M_AN_1000X_AHD;
+
+                       adv |= fiber_pause_map[skge->flow_control];
+               }
 
                /* Restart Auto-negotiation */
                ctrl |= PHY_CT_ANE | PHY_CT_RE_CFG;