i2c: imx: use proper GPIO directions for recovery

When converting to GPIOD, the GPIO directions of SCL/SDA have been
swapped. Fix it!

Fixes: ad36a27959cabb ("i2c: imx: switch to using gpiod for bus recovery gpios")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index c4cf26571b6612c0b327e2f9c91d7522f60e1135..6c0d59ddf5b6fd3dc8b3c88f3d36970b9bb72bdf 100644 (file)
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -1006,8 +1006,8 @@ static int i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx,
                        PINCTRL_STATE_DEFAULT);
        i2c_imx->pinctrl_pins_gpio = pinctrl_lookup_state(i2c_imx->pinctrl,
                        "gpio");
-       rinfo->sda_gpiod = devm_gpiod_get(&pdev->dev, "sda", GPIOD_OUT_HIGH);
-       rinfo->scl_gpiod = devm_gpiod_get(&pdev->dev, "scl", GPIOD_IN);
+       rinfo->sda_gpiod = devm_gpiod_get(&pdev->dev, "sda", GPIOD_IN);
+       rinfo->scl_gpiod = devm_gpiod_get(&pdev->dev, "scl", GPIOD_OUT_HIGH);
 
        if (PTR_ERR(rinfo->sda_gpiod) == -EPROBE_DEFER ||
            PTR_ERR(rinfo->scl_gpiod) == -EPROBE_DEFER) {