--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2018, Broadcom */
+
+/*
+ * This module contains USB PHY initialization for power up and S3 resume
+ * for newer Synopsys based USB hardware first used on the bcm7216.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <linux/soc/brcmstb/brcmstb.h>
+#include "phy-brcm-usb-init.h"
+
+/* Register definitions for the USB CTRL block */
+#define USB_CTRL_SETUP 0x00
+#define USB_CTRL_SETUP_STRAP_IPP_SEL_MASK 0x02000000
+#define USB_CTRL_SETUP_SCB2_EN_MASK 0x00008000
+#define USB_CTRL_SETUP_SCB1_EN_MASK 0x00004000
+#define USB_CTRL_SETUP_SOFT_SHUTDOWN_MASK 0x00000200
+#define USB_CTRL_SETUP_IPP_MASK 0x00000020
+#define USB_CTRL_SETUP_IOC_MASK 0x00000010
+#define USB_CTRL_USB_PM 0x04
+#define USB_CTRL_USB_PM_USB_PWRDN_MASK 0x80000000
+#define USB_CTRL_USB_PM_SOFT_RESET_MASK 0x40000000
+#define USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK 0x00800000
+#define USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK 0x00400000
+#define USB_CTRL_USB_PM_STATUS 0x08
+#define USB_CTRL_USB_DEVICE_CTL1 0x10
+#define USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK 0x00000003
+
+
+static void xhci_soft_reset(struct brcm_usb_init_params *params,
+ int on_off)
+{
+ void __iomem *ctrl = params->ctrl_regs;
+
+ /* Assert reset */
+ if (on_off)
+ USB_CTRL_UNSET(ctrl, USB_PM, XHC_SOFT_RESETB);
+ /* De-assert reset */
+ else
+ USB_CTRL_SET(ctrl, USB_PM, XHC_SOFT_RESETB);
+}
+
+static void usb_init_ipp(struct brcm_usb_init_params *params)
+{
+ void __iomem *ctrl = params->ctrl_regs;
+ u32 reg;
+ u32 orig_reg;
+
+ pr_debug("%s\n", __func__);
+
+ orig_reg = reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP));
+ if (params->ipp != 2)
+ /* override ipp strap pin (if it exits) */
+ reg &= ~(USB_CTRL_MASK(SETUP, STRAP_IPP_SEL));
+
+ /* Override the default OC and PP polarity */
+ reg &= ~(USB_CTRL_MASK(SETUP, IPP) | USB_CTRL_MASK(SETUP, IOC));
+ if (params->ioc)
+ reg |= USB_CTRL_MASK(SETUP, IOC);
+ if (params->ipp == 1)
+ reg |= USB_CTRL_MASK(SETUP, IPP);
+ brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP));
+
+ /*
+ * If we're changing IPP, make sure power is off long enough
+ * to turn off any connected devices.
+ */
+ if ((reg ^ orig_reg) & USB_CTRL_MASK(SETUP, IPP))
+ msleep(50);
+}
+
+static void usb_init_common(struct brcm_usb_init_params *params)
+{
+ u32 reg;
+ void __iomem *ctrl = params->ctrl_regs;
+
+ pr_debug("%s\n", __func__);
+
+ USB_CTRL_UNSET(ctrl, USB_PM, USB_PWRDN);
+ /* 1 millisecond - for USB clocks to settle down */
+ usleep_range(1000, 2000);
+
+ if (USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE)) {
+ reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
+ reg &= ~USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE);
+ reg |= params->mode;
+ brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
+ }
+ switch (params->mode) {
+ case USB_CTLR_MODE_HOST:
+ USB_CTRL_UNSET(ctrl, USB_PM, BDC_SOFT_RESETB);
+ break;
+ default:
+ USB_CTRL_UNSET(ctrl, USB_PM, BDC_SOFT_RESETB);
+ USB_CTRL_SET(ctrl, USB_PM, BDC_SOFT_RESETB);
+ break;
+ }
+}
+
+static void usb_init_xhci(struct brcm_usb_init_params *params)
+{
+ pr_debug("%s\n", __func__);
+
+ xhci_soft_reset(params, 0);
+}
+
+static void usb_uninit_common(struct brcm_usb_init_params *params)
+{
+ void __iomem *ctrl = params->ctrl_regs;
+
+ pr_debug("%s\n", __func__);
+
+ USB_CTRL_SET(ctrl, USB_PM, USB_PWRDN);
+
+}
+
+static void usb_uninit_xhci(struct brcm_usb_init_params *params)
+{
+
+ pr_debug("%s\n", __func__);
+
+ xhci_soft_reset(params, 1);
+}
+
+static int usb_get_dual_select(struct brcm_usb_init_params *params)
+{
+ void __iomem *ctrl = params->ctrl_regs;
+ u32 reg = 0;
+
+ pr_debug("%s\n", __func__);
+
+ reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
+ reg &= USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE);
+ return reg;
+}
+
+static void usb_set_dual_select(struct brcm_usb_init_params *params, int mode)
+{
+ void __iomem *ctrl = params->ctrl_regs;
+ u32 reg;
+
+ pr_debug("%s\n", __func__);
+
+ reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
+ reg &= ~USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE);
+ reg |= mode;
+ brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
+}
+
+
+static const struct brcm_usb_init_ops bcm7216_ops = {
+ .init_ipp = usb_init_ipp,
+ .init_common = usb_init_common,
+ .init_xhci = usb_init_xhci,
+ .uninit_common = usb_uninit_common,
+ .uninit_xhci = usb_uninit_xhci,
+ .get_dual_select = usb_get_dual_select,
+ .set_dual_select = usb_set_dual_select,
+};
+
+void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params)
+{
+
+ pr_debug("%s\n", __func__);
+
+ params->family_name = "7216";
+ params->ops = &bcm7216_ops;
+}
.attrs = brcm_usb_phy_attrs,
};
+static const struct of_device_id brcm_usb_dt_ids[] = {
+ {
+ .compatible = "brcm,bcm7216-usb-phy",
+ .data = &brcm_usb_dvr_init_7216,
+ },
+ { .compatible = "brcm,brcmstb-usb-phy" },
+ { /* sentinel */ }
+};
+
static int brcm_usb_phy_dvr_init(struct platform_device *pdev,
struct brcm_usb_phy_data *priv,
struct device_node *dn)
static int brcm_usb_phy_probe(struct platform_device *pdev)
{
- struct resource *res;
+ struct resource *res_ctrl;
+ struct resource *res_xhciec = NULL;
+ struct resource *res_xhcigbl = NULL;
struct device *dev = &pdev->dev;
struct brcm_usb_phy_data *priv;
struct phy_provider *phy_provider;
struct device_node *dn = pdev->dev.of_node;
int err;
const char *mode;
+ const struct of_device_id *match;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
priv->ini.family_id = brcmstb_get_family_id();
priv->ini.product_id = brcmstb_get_product_id();
- brcm_usb_dvr_init_7445(&priv->ini);
+
+ match = of_match_node(brcm_usb_dt_ids, dev->of_node);
+ if (match && match->data) {
+ void (*dvr_init)(struct brcm_usb_init_params *params);
+
+ dvr_init = match->data;
+ (*dvr_init)(&priv->ini);
+ } else {
+ brcm_usb_dvr_init_7445(&priv->ini);
+ }
+
dev_dbg(dev, "Best mapping table is for %s\n",
priv->ini.family_name);
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(dev, "can't get USB_CTRL base address\n");
- return -EINVAL;
+
+ /* Newer DT node has reg-names. xhci_ec and xhci_gbl are optional. */
+ res_ctrl = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl");
+ if (res_ctrl != NULL) {
+ res_xhciec = platform_get_resource_byname(pdev,
+ IORESOURCE_MEM,
+ "xhci_ec");
+ res_xhcigbl = platform_get_resource_byname(pdev,
+ IORESOURCE_MEM,
+ "xhci_gbl");
+ } else {
+ /* Older DT node without reg-names, use index */
+ res_ctrl = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res_ctrl == NULL) {
+ dev_err(dev, "can't get CTRL base address\n");
+ return -EINVAL;
+ }
+ res_xhciec = platform_get_resource(pdev, IORESOURCE_MEM, 1);
}
- priv->ini.ctrl_regs = devm_ioremap_resource(dev, res);
+ priv->ini.ctrl_regs = devm_ioremap_resource(dev, res_ctrl);
if (IS_ERR(priv->ini.ctrl_regs)) {
dev_err(dev, "can't map CTRL register space\n");
return -EINVAL;
}
-
- /* The XHCI EC registers are optional */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- if (res) {
+ if (res_xhciec) {
priv->ini.xhci_ec_regs =
- devm_ioremap_resource(dev, res);
+ devm_ioremap_resource(dev, res_xhciec);
if (IS_ERR(priv->ini.xhci_ec_regs)) {
dev_err(dev, "can't map XHCI EC register space\n");
return -EINVAL;
}
}
+ if (res_xhcigbl) {
+ priv->ini.xhci_gbl_regs =
+ devm_ioremap_resource(dev, res_xhcigbl);
+ if (IS_ERR(priv->ini.xhci_gbl_regs)) {
+ dev_err(dev, "can't map XHCI Global register space\n");
+ return -EINVAL;
+ }
+ }
of_property_read_u32(dn, "brcm,ipp", &priv->ini.ipp);
of_property_read_u32(dn, "brcm,ioc", &priv->ini.ioc);
SET_LATE_SYSTEM_SLEEP_PM_OPS(brcm_usb_phy_suspend, brcm_usb_phy_resume)
};
-static const struct of_device_id brcm_usb_dt_ids[] = {
- { .compatible = "brcm,brcmstb-usb-phy" },
- { /* sentinel */ }
-};
-
MODULE_DEVICE_TABLE(of, brcm_usb_dt_ids);
static struct platform_driver brcm_usb_driver = {
projects / linux.git / commitdiff