arm64: dts: amlogic: align gpio-key node names with dtschema

The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220609113911.380368-7-krzysztof.kozlowski@linaro.org

diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index a5d79f2f7c1960fbd13d2debbe27b919f5336a3b..603337ca56081e77af5cb3dc185e7103f187dfab 100644 (file)
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -48,7 +48,7 @@
        gpio-keys {
                compatible = "gpio-keys";
 
-               key1 {
+               key-1 {
                        label = "A";
                        linux,code = <BTN_0>;
                        gpios = <&gpio GPIOH_6 GPIO_ACTIVE_LOW>;
@@ -56,7 +56,7 @@
                        interrupts = <34 IRQ_TYPE_EDGE_BOTH>;
                };
 
-               key2 {
+               key-2 {
                        label = "B";
                        linux,code = <BTN_1>;
                        gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>;
@@ -64,7 +64,7 @@
                        interrupts = <35 IRQ_TYPE_EDGE_BOTH>;
                };
 
-               key3 {
+               key-3 {
                        label = "C";
                        linux,code = <BTN_2>;
                        gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
@@ -72,7 +72,7 @@
                        interrupts = <2 IRQ_TYPE_EDGE_BOTH>;
                };
 
-               mic_mute {
+               key-mic-mute {
                        label = "MicMute";
                        linux,code = <SW_MUTE_DEVICE>;
                        linux,input-type = <EV_SW>;
@@ -81,7 +81,7 @@
                        interrupts = <99 IRQ_TYPE_EDGE_BOTH>;
                };
 
-               power_key {
+               key-power {
                        label = "PowerKey";
                        linux,code = <KEY_POWER>;
                        gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;