arm64: dts: visconti: Add DTS for the VisROBO board

This board consists of two boards:
the SoM board (VRC SoM) with the SoC on board, and the board for I/O (VRB).

The functions of each board supported by this update are as follows:
  - VRC SoM
    - WDT
    - GPIO
    - SDCard (SPI-MMC mode)
    - I2C x1
  - VRB board
    - VRC SoM
    - UART x2
    - Ethernet phy

Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Link: https://lore.kernel.org/r/20211014092703.15251-4-yuji2.ishikawa@toshiba.co.jp
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>

diff --git a/arch/arm64/boot/dts/toshiba/Makefile b/arch/arm64/boot/dts/toshiba/Makefile
index 8cd460d5b68e910a9824ea232452325d27e090fd..7ccb4664bb37576bb967e76bcb84577b350a6476 100644 (file)
--- a/arch/arm64/boot/dts/toshiba/Makefile
+++ b/arch/arm64/boot/dts/toshiba/Makefile
@@ -1,2 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_VISCONTI) += tmpv7708-rm-mbrc.dtb
+dtb-$(CONFIG_ARCH_VISCONTI) += tmpv7708-visrobo-vrb.dtb

diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrb.dts b/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrb.dts
new file mode 100644 (file)
index 0000000..d081746
--- /dev/null
+++ b/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrb.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree File for TMPV7708 VisROBO VRB board
+ *
+ * (C) Copyright 2020, 2021, Toshiba Corporation.
+ * (C) Copyright 2020, Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+ */
+
+/dts-v1/;
+
+#include "tmpv7708-visrobo-vrc.dtsi"
+
+/ {
+       model = "Toshiba TMPV7708 VisROBO (VRB) board";
+       compatible = "toshiba,tmpv7708-visrobo-vrb", "toshiba,tmpv7708";
+
+       aliases {
+               serial0 = &uart0;
+               serial1 = &uart1;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       /* 768MB memory */
+       memory@80000000 {
+               device_type = "memory";
+               reg = <0x0 0x80000000 0x0 0x30000000>;
+       };
+};
+
+&uart0 {
+       status = "okay";
+       clocks = <&uart_clk>;
+       clock-names = "apb_pclk";
+};
+
+&uart1 {
+       status = "okay";
+       clocks = <&uart_clk>;
+       clock-names = "apb_pclk";
+};
+
+&piether {
+       status = "okay";
+       phy-handle = <&phy0>;
+       phy-mode = "rgmii-id";
+       clocks = <&clk300mhz>, <&clk125mhz>;
+       clock-names = "stmmaceth", "phy_ref_clk";
+
+       mdio0 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "snps,dwmac-mdio";
+               phy0: ethernet-phy@1 {
+                       device_type = "ethernet-phy";
+                       reg = <0x1>;
+               };
+       };
+};

diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrc.dtsi b/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrc.dtsi
new file mode 100644 (file)
index 0000000..f0a93db
--- /dev/null
+++ b/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrc.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree File for TMPV7708 VisROBO VRC SoM
+ *
+ * (C) Copyright 2020, 2021, Toshiba Corporation.
+ * (C) Copyright 2020, Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+ */
+
+/dts-v1/;
+
+#include "tmpv7708.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+&wdt {
+       status = "okay";
+       clocks = <&wdt_clk>;
+};
+
+&gpio {
+       status = "okay";
+};
+
+&spi0_pins {
+       groups = "spi0_grp", "spi0_cs0_grp";
+};
+
+&spi0 {
+       status = "okay";
+       clocks = <&clk300mhz>, <&clk150mhz>;
+       clock-names = "sspclk", "apb_pclk";
+
+       mmc-slot@0 {
+               compatible = "mmc-spi-slot";
+               reg = <0>;
+               gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+               voltage-ranges = <3200 3400>;
+               spi-max-frequency = <12000000>;
+       };
+};
+
+&i2c0 {
+       status = "okay";
+       clocks = <&clk150mhz>;
+};