// SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974pro.dtsi"
-#include "pm8841.dtsi"
-#include "pm8941.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "qcom-msm8974pro-sony-xperia-shinano-common.dtsi"
/ {
model = "Sony Xperia Z2 Tablet";
compatible = "sony,xperia-castor", "qcom,msm8974pro", "qcom,msm8974";
chassis-type = "tablet";
- aliases {
- mmc0 = &sdhc_1;
- mmc1 = &sdhc_2;
- serial0 = &blsp1_uart2;
- serial1 = &blsp2_uart1;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- pinctrl-0 = <&gpio_keys_pin_a>;
- pinctrl-names = "default";
-
- key-volume-down {
- label = "volume_down";
- gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_VOLUMEDOWN>;
- debounce-interval = <15>;
- };
-
- key-volume-up {
- label = "volume_up";
- gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_VOLUMEUP>;
- debounce-interval = <15>;
- };
- };
-
vreg_bl_vddio: lcd-backlight-vddio {
compatible = "regulator-fixed";
regulator-name = "vreg_bl_vddio";
pinctrl-0 = <&lcd_backlight_en_pin_a>;
pinctrl-names = "default";
};
-
- vreg_vsp: lcd-dcdc-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vreg_vsp";
- regulator-min-microvolt = <5600000>;
- regulator-max-microvolt = <5600000>;
-
- gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-0 = <&lcd_dcdc_en_pin_a>;
- pinctrl-names = "default";
- };
-
- vreg_boost: vreg-boost {
- compatible = "regulator-fixed";
-
- regulator-name = "vreg-boost";
- regulator-min-microvolt = <3150000>;
- regulator-max-microvolt = <3150000>;
-
- regulator-always-on;
- regulator-boot-on;
-
- gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-names = "default";
- pinctrl-0 = <&boost_bypass_n_pin>;
- };
-
- vreg_vph_pwr: vreg-vph-pwr {
- compatible = "regulator-fixed";
- regulator-name = "vph-pwr";
-
- regulator-min-microvolt = <3600000>;
- regulator-max-microvolt = <3600000>;
-
- regulator-always-on;
- };
-
- vreg_wlan: wlan-regulator {
- compatible = "regulator-fixed";
-
- regulator-name = "wl-reg";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-0 = <&wlan_regulator_pin>;
- pinctrl-names = "default";
- };
-};
-
-&blsp1_uart2 {
- status = "okay";
-};
-
-&blsp2_i2c2 {
- clock-frequency = <355000>;
-
- status = "okay";
-
- synaptics@2c {
- compatible = "syna,rmi4-i2c";
- reg = <0x2c>;
-
- interrupt-parent = <&tlmm>;
- interrupts = <86 IRQ_TYPE_EDGE_FALLING>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- vdd-supply = <&pm8941_l22>;
- vio-supply = <&pm8941_lvs3>;
-
- pinctrl-0 = <&ts_int_pin>;
- pinctrl-names = "default";
-
- syna,startup-delay-ms = <100>;
-
- rmi4-f01@1 {
- reg = <0x1>;
- syna,nosleep-mode = <1>;
- };
-
- rmi4-f11@11 {
- reg = <0x11>;
- syna,sensor-type = <1>;
- touchscreen-inverted-x;
- };
- };
};
&blsp2_i2c5 {
rom-addr = /bits/ 8 <0xa0>;
rom-val = /bits/ 8 <0xff>;
};
+
rom-a1h {
rom-addr = /bits/ 8 <0xa1>;
rom-val = /bits/ 8 <0x3f>;
};
+
rom-a2h {
rom-addr = /bits/ 8 <0xa2>;
rom-val = /bits/ 8 <0x20>;
};
+
rom-a3h {
rom-addr = /bits/ 8 <0xa3>;
rom-val = /bits/ 8 <0x5e>;
};
+
rom-a4h {
rom-addr = /bits/ 8 <0xa4>;
rom-val = /bits/ 8 <0x02>;
};
+
rom-a5h {
rom-addr = /bits/ 8 <0xa5>;
rom-val = /bits/ 8 <0x04>;
};
+
rom-a6h {
rom-addr = /bits/ 8 <0xa6>;
rom-val = /bits/ 8 <0x80>;
};
+
rom-a7h {
rom-addr = /bits/ 8 <0xa7>;
rom-val = /bits/ 8 <0xf7>;
};
+
rom-a9h {
rom-addr = /bits/ 8 <0xa9>;
rom-val = /bits/ 8 <0x80>;
};
+
rom-aah {
rom-addr = /bits/ 8 <0xaa>;
rom-val = /bits/ 8 <0x0f>;
};
+
rom-aeh {
rom-addr = /bits/ 8 <0xae>;
rom-val = /bits/ 8 <0x0f>;
};
};
-&pm8941_coincell {
- qcom,rset-ohms = <2100>;
- qcom,vset-millivolts = <3000>;
-
- status = "okay";
-};
-
&pm8941_gpios {
- gpio_keys_pin_a: gpio-keys-active-state {
- pins = "gpio2", "gpio5";
- function = "normal";
- bias-pull-up;
- power-source = <PM8941_GPIO_S3>;
- };
-
bt_reg_on_pin: bt-reg-on-state {
pins = "gpio16";
function = "normal";
output-low;
power-source = <PM8941_GPIO_S3>;
};
-
- wlan_sleep_clk_pin: wl-sleep-clk-state {
- pins = "gpio17";
- function = "func2";
- output-high;
- power-source = <PM8941_GPIO_S3>;
- };
-
- wlan_regulator_pin: wl-reg-active-state {
- pins = "gpio18";
- function = "normal";
- bias-disable;
- power-source = <PM8941_GPIO_S3>;
- };
-
- lcd_dcdc_en_pin_a: lcd-dcdc-en-active-state {
- pins = "gpio20";
- function = "normal";
- bias-disable;
- power-source = <PM8941_GPIO_S3>;
- input-disable;
- output-low;
- };
-};
-
-&pm8941_lpg {
- qcom,power-source = <1>;
-
- status = "okay";
-
- multi-led {
- color = <LED_COLOR_ID_RGB>;
- function = LED_FUNCTION_STATUS;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- led@5 {
- reg = <5>;
- color = <LED_COLOR_ID_BLUE>;
- };
-
- led@6 {
- reg = <6>;
- color = <LED_COLOR_ID_GREEN>;
- };
-
- led@7 {
- reg = <7>;
- color = <LED_COLOR_ID_RED>;
- };
- };
-};
-
-&remoteproc_adsp {
- cx-supply = <&pm8841_s2>;
- status = "okay";
-};
-
-&remoteproc_mss {
- cx-supply = <&pm8841_s2>;
- mss-supply = <&pm8841_s3>;
- mx-supply = <&pm8841_s1>;
- pll-supply = <&pm8941_l12>;
- status = "okay";
};
&rpm_requests {
- regulators-0 {
- compatible = "qcom,rpm-pm8841-regulators";
-
- pm8841_s1: s1 {
- regulator-min-microvolt = <675000>;
- regulator-max-microvolt = <1050000>;
- };
-
- pm8841_s2: s2 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1050000>;
- };
-
- pm8841_s3: s3 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1050000>;
- };
-
- pm8841_s4: s4 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1050000>;
- };
- };
-
regulators-1 {
- compatible = "qcom,rpm-pm8941-regulators";
-
- vdd_l1_l3-supply = <&pm8941_s1>;
- vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
- vdd_l4_l11-supply = <&pm8941_s1>;
- vdd_l5_l7-supply = <&pm8941_s2>;
- vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
- vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
- vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
- vdd_l21-supply = <&vreg_boost>;
-
- pm8941_s1: s1 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- pm8941_s2: s2 {
- regulator-min-microvolt = <2150000>;
- regulator-max-microvolt = <2150000>;
- regulator-boot-on;
- };
-
- pm8941_s3: s3 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-system-load = <154000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- pm8941_s4: s4 {
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- pm8941_l1: l1 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- pm8941_l2: l2 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- pm8941_l3: l3 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- pm8941_l4: l4 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- };
-
- pm8941_l5: l5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pm8941_l6: l6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- };
-
- pm8941_l7: l7 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- };
-
- pm8941_l8: l8 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pm8941_l9: l9 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
pm8941_l11: l11 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1350000>;
};
- pm8941_l12: l12 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- pm8941_l13: l13 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- regulator-boot-on;
- };
-
- pm8941_l14: l14 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pm8941_l15: l15 {
- regulator-min-microvolt = <2050000>;
- regulator-max-microvolt = <2050000>;
- };
-
- pm8941_l16: l16 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- };
-
- pm8941_l17: l17 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- };
-
- pm8941_l18: l18 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- };
-
pm8941_l19: l19 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
-
- pm8941_l20: l20 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
- regulator-system-load = <500000>;
- regulator-allow-set-load;
- regulator-boot-on;
- };
-
- pm8941_l21: l21 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
- regulator-boot-on;
- };
-
- pm8941_l22: l22 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- pm8941_l23: l23 {
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- pm8941_l24: l24 {
- regulator-min-microvolt = <3075000>;
- regulator-max-microvolt = <3075000>;
- regulator-boot-on;
- };
-
- pm8941_lvs3: lvs3 {};
- };
-};
-
-&sdhc_1 {
- vmmc-supply = <&pm8941_l20>;
- vqmmc-supply = <&pm8941_s3>;
-
- pinctrl-0 = <&sdc1_on>;
- pinctrl-1 = <&sdc1_off>;
- pinctrl-names = "default", "sleep";
-
- status = "okay";
-};
-
-&sdhc_2 {
- vmmc-supply = <&pm8941_l21>;
- vqmmc-supply = <&pm8941_l13>;
-
- cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
-
- pinctrl-0 = <&sdc2_on>;
- pinctrl-1 = <&sdc2_off>;
- pinctrl-names = "default", "sleep";
-
- status = "okay";
-};
-
-&sdhc_3 {
- max-frequency = <100000000>;
- vmmc-supply = <&vreg_wlan>;
- non-removable;
-
- pinctrl-0 = <&sdc3_on>;
- pinctrl-names = "default";
-
- status = "okay";
-
- wifi@1 {
- compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
- reg = <1>;
-
- brcm,drive-strength = <10>;
-
- pinctrl-0 = <&wlan_sleep_clk_pin>;
- pinctrl-names = "default";
};
};
status = "okay";
};
-&tlmm {
- lcd_backlight_en_pin_a: lcd-backlight-vddio-state {
- pins = "gpio69";
- function = "gpio";
- drive-strength = <10>;
- output-low;
- bias-disable;
- };
-
- sdc1_on: sdc1-on-state {
- clk-pins {
- pins = "sdc1_clk";
- drive-strength = <16>;
- bias-disable;
- };
-
- cmd-data-pins {
- pins = "sdc1_cmd", "sdc1_data";
- drive-strength = <10>;
- bias-pull-up;
- };
- };
-
- sdc2_on: sdc2-on-state {
- clk-pins {
- pins = "sdc2_clk";
- drive-strength = <6>;
- bias-disable;
- };
-
- cmd-data-pins {
- pins = "sdc2_cmd", "sdc2_data";
- drive-strength = <6>;
- bias-pull-up;
- };
-
- cd-pins {
- pins = "gpio62";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- sdc3_on: sdc3-on-state {
- clk-pins {
- pins = "gpio40";
- function = "sdc3";
- drive-strength = <10>;
- bias-disable;
- };
-
- cmd-pins {
- pins = "gpio39";
- function = "sdc3";
- drive-strength = <10>;
- bias-pull-up;
- };
-
- data-pins {
- pins = "gpio35", "gpio36", "gpio37", "gpio38";
- function = "sdc3";
- drive-strength = <10>;
- bias-pull-up;
- };
- };
+&synaptics_touchscreen {
+ vio-supply = <&pm8941_lvs3>;
+};
- ts_int_pin: ts-int-pin-state {
- pins = "gpio86";
+&tlmm {
+ bt_dev_wake_pin: bt-dev-wake-state {
+ pins = "gpio96";
function = "gpio";
drive-strength = <2>;
bias-disable;
output-low;
};
- bt_dev_wake_pin: bt-dev-wake-state {
- pins = "gpio96";
+ lcd_backlight_en_pin_a: lcd-backlight-vddio-state {
+ pins = "gpio69";
function = "gpio";
- drive-strength = <2>;
+ drive-strength = <10>;
+ output-low;
bias-disable;
};
};
-
-&usb {
- phys = <&usb_hs1_phy>;
- phy-select = <&tcsr 0xb000 0>;
- extcon = <&smbb>, <&usb_id>;
- vbus-supply = <&chg_otg>;
-
- hnp-disable;
- srp-disable;
- adp-disable;
-
- status = "okay";
-};
-
-&usb_hs1_phy {
- v1p8-supply = <&pm8941_l6>;
- v3p3-supply = <&pm8941_l24>;
-
- extcon = <&smbb>;
- qcom,init-seq = /bits/ 8 <0x1 0x64>;
-
- status = "okay";
-};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+ aliases {
+ mmc0 = &sdhc_1;
+ mmc1 = &sdhc_2;
+ serial0 = &blsp1_uart2;
+ serial1 = &blsp2_uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&gpio_keys_pin_a>;
+ pinctrl-names = "default";
+
+ key-volume-down {
+ label = "volume_down";
+ gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ debounce-interval = <15>;
+ };
+
+ key-volume-up {
+ label = "volume_up";
+ gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <15>;
+ };
+ };
+
+ vreg_vsp: lcd-dcdc-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_vsp";
+ regulator-min-microvolt = <5600000>;
+ regulator-max-microvolt = <5600000>;
+
+ gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&lcd_dcdc_en_pin_a>;
+ pinctrl-names = "default";
+ };
+
+ vreg_boost: vreg-boost {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vreg-boost";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&boost_bypass_n_pin>;
+ };
+
+ vreg_vph_pwr: vreg-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph-pwr";
+
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ regulator-always-on;
+ };
+
+ vreg_wlan: wlan-regulator {
+ compatible = "regulator-fixed";
+
+ regulator-name = "wl-reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&wlan_regulator_pin>;
+ pinctrl-names = "default";
+ };
+};
+
+&blsp1_uart2 {
+ status = "okay";
+};
+
+&blsp2_i2c2 {
+ clock-frequency = <355000>;
+
+ status = "okay";
+
+ synaptics_touchscreen: synaptics@2c {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x2c>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <86 IRQ_TYPE_EDGE_FALLING>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd-supply = <&pm8941_l22>;
+ /* vio-supply is set in dts */
+
+ pinctrl-0 = <&ts_int_pin>;
+ pinctrl-names = "default";
+
+ syna,startup-delay-ms = <100>;
+
+ rmi4-f01@1 {
+ reg = <0x1>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f11@11 {
+ reg = <0x11>;
+ syna,sensor-type = <1>;
+ touchscreen-inverted-x;
+ };
+ };
+};
+
+&pm8941_coincell {
+ qcom,rset-ohms = <2100>;
+ qcom,vset-millivolts = <3000>;
+
+ status = "okay";
+};
+
+&pm8941_gpios {
+ gpio_keys_pin_a: gpio-keys-active-state {
+ pins = "gpio2", "gpio5";
+ function = "normal";
+ bias-pull-up;
+ power-source = <PM8941_GPIO_S3>;
+ };
+
+ wlan_sleep_clk_pin: wl-sleep-clk-state {
+ pins = "gpio17";
+ function = "func2";
+ output-high;
+ power-source = <PM8941_GPIO_S3>;
+ };
+
+ wlan_regulator_pin: wl-reg-active-state {
+ pins = "gpio18";
+ function = "normal";
+ bias-disable;
+ power-source = <PM8941_GPIO_S3>;
+ };
+
+ lcd_dcdc_en_pin_a: lcd-dcdc-en-active-state {
+ pins = "gpio20";
+ function = "normal";
+ bias-disable;
+ power-source = <PM8941_GPIO_S3>;
+ input-disable;
+ output-low;
+ };
+};
+
+&pm8941_lpg {
+ qcom,power-source = <1>;
+
+ status = "okay";
+
+ multi-led {
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_STATUS;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@5 {
+ reg = <5>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@6 {
+ reg = <6>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@7 {
+ reg = <7>;
+ color = <LED_COLOR_ID_RED>;
+ };
+ };
+};
+
+&remoteproc_adsp {
+ cx-supply = <&pm8841_s2>;
+ status = "okay";
+};
+
+&remoteproc_mss {
+ cx-supply = <&pm8841_s2>;
+ mss-supply = <&pm8841_s3>;
+ mx-supply = <&pm8841_s1>;
+ pll-supply = <&pm8941_l12>;
+ status = "okay";
+};
+
+&rpm_requests {
+ regulators-0 {
+ compatible = "qcom,rpm-pm8841-regulators";
+
+ pm8841_s1: s1 {
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ pm8841_s2: s2 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ pm8841_s3: s3 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ pm8841_s4: s4 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,rpm-pm8941-regulators";
+
+ vdd_l1_l3-supply = <&pm8941_s1>;
+ vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+ vdd_l4_l11-supply = <&pm8941_s1>;
+ vdd_l5_l7-supply = <&pm8941_s2>;
+ vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+ vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+ vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+ vdd_l21-supply = <&vreg_boost>;
+
+ pm8941_s1: s1 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ pm8941_s2: s2 {
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+ regulator-boot-on;
+ };
+
+ pm8941_s3: s3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-system-load = <154000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ pm8941_s4: s4 {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ pm8941_l1: l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ pm8941_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8941_l3: l3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8941_l4: l4 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8941_l5: l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ pm8941_l7: l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ pm8941_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_l9: l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8941_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ pm8941_l13: l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-boot-on;
+ };
+
+ pm8941_l14: l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_l15: l15 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8941_l16: l16 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ pm8941_l17: l17 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ pm8941_l18: l18 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8941_l20: l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-system-load = <500000>;
+ regulator-allow-set-load;
+ regulator-boot-on;
+ };
+
+ pm8941_l21: l21 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-boot-on;
+ };
+
+ pm8941_l22: l22 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8941_l23: l23 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ pm8941_l24: l24 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ regulator-boot-on;
+ };
+
+ pm8941_lvs3: lvs3 {};
+ };
+};
+
+&sdhc_1 {
+ vmmc-supply = <&pm8941_l20>;
+ vqmmc-supply = <&pm8941_s3>;
+
+ pinctrl-0 = <&sdc1_on>;
+ pinctrl-1 = <&sdc1_off>;
+ pinctrl-names = "default", "sleep";
+
+ status = "okay";
+};
+
+&sdhc_2 {
+ vmmc-supply = <&pm8941_l21>;
+ vqmmc-supply = <&pm8941_l13>;
+
+ cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&sdc2_on>;
+ pinctrl-1 = <&sdc2_off>;
+ pinctrl-names = "default", "sleep";
+
+ status = "okay";
+};
+
+&sdhc_3 {
+ max-frequency = <100000000>;
+ vmmc-supply = <&vreg_wlan>;
+ non-removable;
+
+ pinctrl-0 = <&sdc3_on>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ wifi@1 {
+ compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
+ reg = <1>;
+
+ brcm,drive-strength = <10>;
+
+ pinctrl-0 = <&wlan_sleep_clk_pin>;
+ pinctrl-names = "default";
+ };
+};
+
+&tlmm {
+ sdc1_on: sdc1-on-state {
+ clk-pins {
+ pins = "sdc1_clk";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ cmd-data-pins {
+ pins = "sdc1_cmd", "sdc1_data";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
+
+ sdc2_on: sdc2-on-state {
+ clk-pins {
+ pins = "sdc2_clk";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ cmd-data-pins {
+ pins = "sdc2_cmd", "sdc2_data";
+ drive-strength = <6>;
+ bias-pull-up;
+ };
+
+ cd-pins {
+ pins = "gpio62";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ sdc3_on: sdc3-on-state {
+ clk-pins {
+ pins = "gpio40";
+ function = "sdc3";
+ drive-strength = <10>;
+ bias-disable;
+ };
+
+ cmd-pins {
+ pins = "gpio39";
+ function = "sdc3";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+
+ data-pins {
+ pins = "gpio35", "gpio36", "gpio37", "gpio38";
+ function = "sdc3";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
+
+ ts_int_pin: ts-int-pin-state {
+ pins = "gpio86";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&usb {
+ phys = <&usb_hs1_phy>;
+ phy-select = <&tcsr 0xb000 0>;
+ extcon = <&smbb>, <&usb_id>;
+ vbus-supply = <&chg_otg>;
+
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+
+ status = "okay";
+};
+
+&usb_hs1_phy {
+ v1p8-supply = <&pm8941_l6>;
+ v3p3-supply = <&pm8941_l24>;
+
+ extcon = <&smbb>;
+ qcom,init-seq = /bits/ 8 <0x1 0x64>;
+
+ status = "okay";
+};
projects / linux.git / commitdiff