ARM: dts: dra7x-evm: switch to new cpsw switch drv

Switch all TI DRA7x boards to use new cpsw switch driver. Those boards
configured in dual_mac mode by default. Hence, dual_mac mode has been
preserved the same way between legacy and new driver it's safe to switch
drivers.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index bda6f7eeef4f4e302351650fbc461380970c6b4c..38530dbb89a00b7cdaef0609e75d52164fb12f4b 100644 (file)
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -537,24 +537,23 @@
        ti,no-idle-on-init;
 };
 
-&mac {
+&mac_sw {
        status = "okay";
-       dual_emac;
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
        phy-handle = <&ethphy0>;
        phy-mode = "rgmii";
-       dual_emac_res_vlan = <1>;
+       ti,dual-emac-pvid = <1>;
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
        phy-handle = <&ethphy1>;
        phy-mode = "rgmii";
-       dual_emac_res_vlan = <2>;
+       ti,dual-emac-pvid = <2>;
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
        ethphy0: ethernet-phy@2 {
                reg = <2>;
        };

diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
index 10da51bee42f87b7cc34fcc15eda179683a8a1ec..cad58f733bd6f7bd344c6f0340b8ebb6178e6fdb 100644 (file)
--- a/arch/arm/boot/dts/dra71-evm.dts
+++ b/arch/arm/boot/dts/dra71-evm.dts
@@ -219,26 +219,26 @@
        vqmmc-supply = <&evm_1v8_sw>;
 };
 
-&mac {
+&mac_sw {
        mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>,
                     <&pcf_hdmi 9 GPIO_ACTIVE_LOW>,     /* P11 */
                     <&pcf_hdmi 10 GPIO_ACTIVE_LOW>;    /* P12 */
-       dual_emac;
+       status = "okay";
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
        phy-handle = <&dp83867_0>;
        phy-mode = "rgmii-id";
-       dual_emac_res_vlan = <1>;
+       ti,dual-emac-pvid = <1>;
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
        phy-handle = <&dp83867_1>;
        phy-mode = "rgmii-id";
-       dual_emac_res_vlan = <2>;
+       ti,dual-emac-pvid = <2>;
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
        dp83867_0: ethernet-phy@2 {
                reg = <2>;
                ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;

diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index 7506e415b08f247d4d394335ee2dc4bcfc8e665b..b65b2dd094d0ff57bc3fa1d7c1fdb1c0b611e254 100644 (file)
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -462,10 +462,6 @@
        };
 };
 
-&mac {
-       status = "okay";
-};
-
 &dcan1 {
        status = "okay";
        pinctrl-names = "default", "sleep", "active";

diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts
index 54dab0f212d132c5a2662a5ffac7d58963e7ccf5..f242b937f88c8ab488970b007ac55b7b6bbc4e33 100644 (file)
--- a/arch/arm/boot/dts/dra72-evm-revc.dts
+++ b/arch/arm/boot/dts/dra72-evm-revc.dts
@@ -77,26 +77,26 @@
        interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
 };
 
-&mac {
+&mac_sw {
        mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>,
                     <&pcf_hdmi 9 GPIO_ACTIVE_LOW>,     /* P11 */
                     <&pcf_hdmi 10 GPIO_ACTIVE_LOW>;    /* P12 */
-       dual_emac;
+       status = "okay";
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
        phy-handle = <&dp83867_0>;
        phy-mode = "rgmii-id";
-       dual_emac_res_vlan = <1>;
+       ti,dual-emac-pvid = <1>;
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
        phy-handle = <&dp83867_1>;
        phy-mode = "rgmii-id";
-       dual_emac_res_vlan = <2>;
+       ti,dual-emac-pvid = <2>;
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
        dp83867_0: ethernet-phy@2 {
                reg = <2>;
                ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;

diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index 6ea9936f7d9c544c0e9da6fe369f256231bd239d..5f62f92eb96c34ff6a63f990f4f3cbfc09c0c751 100644 (file)
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -69,17 +69,22 @@
        interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
 };
 
-&mac {
-       slaves = <1>;
+&mac_sw {
        mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_HIGH>;
+       status = "okay";
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
        phy-handle = <&ethphy0>;
        phy-mode = "rgmii";
+       ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+       status = "disabled";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
        ethphy0: ethernet-phy@3 {
                reg = <3>;
        };

diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index 81590ef3693708481e330f351f715d50f2532075..9bd01ae40b1d1fbb488b728af0ff5619013c55d5 100644 (file)
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -475,25 +475,23 @@
        status = "disabled";
 };
 
-&mac {
+&mac_sw {
        status = "okay";
-
-       dual_emac;
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
        phy-handle = <&dp83867_0>;
        phy-mode = "rgmii-id";
-       dual_emac_res_vlan = <1>;
+       ti,dual-emac-pvid = <1>;
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
        phy-handle = <&dp83867_1>;
        phy-mode = "rgmii-id";
-       dual_emac_res_vlan = <2>;
+       ti,dual-emac-pvid = <2>;
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
        dp83867_0: ethernet-phy@2 {
                reg = <2>;
                ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;