L:     linux-media@vger.kernel.org
 S:     Supported
 F:     Documentation/devicetree/bindings/media/microchip,csi2dc.yaml
-F:     drivers/media/platform/atmel/microchip-csi2dc.c
+F:     drivers/media/platform/microchip/microchip-csi2dc.c
 
 MICROCHIP ECC DRIVER
 M:     Tudor Ambarus <tudor.ambarus@microchip.com>
 
 source "drivers/media/platform/intel/Kconfig"
 source "drivers/media/platform/marvell/Kconfig"
 source "drivers/media/platform/mediatek/Kconfig"
+source "drivers/media/platform/microchip/Kconfig"
 source "drivers/media/platform/nvidia/Kconfig"
 source "drivers/media/platform/nxp/Kconfig"
 source "drivers/media/platform/qcom/Kconfig"
 
 obj-y += intel/
 obj-y += marvell/
 obj-y += mediatek/
+obj-y += microchip/
 obj-y += nvidia/
 obj-y += nxp/
 obj-y += qcom/
 
          This module makes the ATMEL Image Sensor Interface available
          as a v4l2 device.
 
-config VIDEO_MICROCHIP_CSI2DC
-       tristate "Microchip CSI2 Demux Controller"
-       depends on V4L_PLATFORM_DRIVERS
-       depends on VIDEO_DEV && COMMON_CLK && OF
-       depends on ARCH_AT91 || COMPILE_TEST
-       select MEDIA_CONTROLLER
-       select VIDEO_V4L2_SUBDEV_API
-       select V4L2_FWNODE
-       help
-         CSI2 Demux Controller driver. CSI2DC is a helper chip
-         that converts IDI interface byte stream to a parallel pixel stream.
-         It supports various RAW formats as input.
-
-         To compile this driver as a module, choose M here: the
-         module will be called microchip-csi2dc.
 
 obj-$(CONFIG_VIDEO_ATMEL_ISC_BASE) += atmel-isc-common.o
 obj-$(CONFIG_VIDEO_ATMEL_ISC) += atmel-isc.o
 obj-$(CONFIG_VIDEO_ATMEL_XISC) += atmel-xisc.o
-obj-$(CONFIG_VIDEO_MICROCHIP_CSI2DC) += microchip-csi2dc.o
 
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Microchip CSI2 Demux Controller (CSI2DC) driver
- *
- * Copyright (C) 2018 Microchip Technology, Inc.
- *
- * Author: Eugen Hristev <eugen.hristev@microchip.com>
- *
- */
-
-#include <linux/clk.h>
-#include <linux/mod_devicetable.h>
-#include <linux/module.h>
-#include <linux/of_graph.h>
-#include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
-#include <linux/videodev2.h>
-
-#include <media/v4l2-fwnode.h>
-#include <media/v4l2-subdev.h>
-
-/* Global configuration register */
-#define CSI2DC_GCFG                    0x0
-
-/* MIPI sensor pixel clock is free running */
-#define CSI2DC_GCFG_MIPIFRN            BIT(0)
-/* GPIO parallel interface selection */
-#define CSI2DC_GCFG_GPIOSEL            BIT(1)
-/* Output waveform inter-line minimum delay */
-#define CSI2DC_GCFG_HLC(v)             ((v) << 4)
-#define CSI2DC_GCFG_HLC_MASK           GENMASK(7, 4)
-/* SAMA7G5 requires a HLC delay of 15 */
-#define SAMA7G5_HLC                    (15)
-
-/* Global control register */
-#define CSI2DC_GCTLR                   0x04
-#define CSI2DC_GCTLR_SWRST             BIT(0)
-
-/* Global status register */
-#define CSI2DC_GS                      0x08
-
-/* SSP interrupt status register */
-#define CSI2DC_SSPIS                   0x28
-/* Pipe update register */
-#define CSI2DC_PU                      0xc0
-/* Video pipe attributes update */
-#define CSI2DC_PU_VP                   BIT(0)
-
-/* Pipe update status register */
-#define CSI2DC_PUS                     0xc4
-
-/* Video pipeline Interrupt Status Register */
-#define CSI2DC_VPISR                   0xf4
-
-/* Video pipeline enable register */
-#define CSI2DC_VPE                     0xf8
-#define CSI2DC_VPE_ENABLE              BIT(0)
-
-/* Video pipeline configuration register */
-#define CSI2DC_VPCFG                   0xfc
-/* Data type */
-#define CSI2DC_VPCFG_DT(v)             ((v) << 0)
-#define CSI2DC_VPCFG_DT_MASK           GENMASK(5, 0)
-/* Virtual channel identifier */
-#define CSI2DC_VPCFG_VC(v)             ((v) << 6)
-#define CSI2DC_VPCFG_VC_MASK           GENMASK(7, 6)
-/* Decompression enable */
-#define CSI2DC_VPCFG_DE                        BIT(8)
-/* Decoder mode */
-#define CSI2DC_VPCFG_DM(v)             ((v) << 9)
-#define CSI2DC_VPCFG_DM_DECODER8TO12   0
-/* Decoder predictor 2 selection */
-#define CSI2DC_VPCFG_DP2               BIT(12)
-/* Recommended memory storage */
-#define CSI2DC_VPCFG_RMS               BIT(13)
-/* Post adjustment */
-#define CSI2DC_VPCFG_PA                        BIT(14)
-
-/* Video pipeline column register */
-#define CSI2DC_VPCOL                   0x100
-/* Column number */
-#define CSI2DC_VPCOL_COL(v)            ((v) << 0)
-#define CSI2DC_VPCOL_COL_MASK          GENMASK(15, 0)
-
-/* Video pipeline row register */
-#define CSI2DC_VPROW                   0x104
-/* Row number */
-#define CSI2DC_VPROW_ROW(v)            ((v) << 0)
-#define CSI2DC_VPROW_ROW_MASK          GENMASK(15, 0)
-
-/* Version register */
-#define CSI2DC_VERSION                 0x1fc
-
-/* register read/write helpers */
-#define csi2dc_readl(st, reg)          readl_relaxed((st)->base + (reg))
-#define csi2dc_writel(st, reg, val)    writel_relaxed((val), \
-                                       (st)->base + (reg))
-
-/* supported RAW data types */
-#define CSI2DC_DT_RAW6                 0x28
-#define CSI2DC_DT_RAW7                 0x29
-#define CSI2DC_DT_RAW8                 0x2a
-#define CSI2DC_DT_RAW10                        0x2b
-#define CSI2DC_DT_RAW12                        0x2c
-#define CSI2DC_DT_RAW14                        0x2d
-/* YUV data types */
-#define CSI2DC_DT_YUV422_8B            0x1e
-
-/*
- * struct csi2dc_format - CSI2DC format type struct
- * @mbus_code:         Media bus code for the format
- * @dt:                        Data type constant for this format
- */
-struct csi2dc_format {
-       u32                             mbus_code;
-       u32                             dt;
-};
-
-static const struct csi2dc_format csi2dc_formats[] = {
-       {
-               .mbus_code =            MEDIA_BUS_FMT_SRGGB8_1X8,
-               .dt =                   CSI2DC_DT_RAW8,
-       }, {
-               .mbus_code =            MEDIA_BUS_FMT_SBGGR8_1X8,
-               .dt =                   CSI2DC_DT_RAW8,
-       }, {
-               .mbus_code =            MEDIA_BUS_FMT_SGRBG8_1X8,
-               .dt =                   CSI2DC_DT_RAW8,
-       }, {
-               .mbus_code =            MEDIA_BUS_FMT_SGBRG8_1X8,
-               .dt =                   CSI2DC_DT_RAW8,
-       }, {
-               .mbus_code =            MEDIA_BUS_FMT_SRGGB10_1X10,
-               .dt =                   CSI2DC_DT_RAW10,
-       }, {
-               .mbus_code =            MEDIA_BUS_FMT_SBGGR10_1X10,
-               .dt =                   CSI2DC_DT_RAW10,
-       }, {
-               .mbus_code =            MEDIA_BUS_FMT_SGRBG10_1X10,
-               .dt =                   CSI2DC_DT_RAW10,
-       }, {
-               .mbus_code =            MEDIA_BUS_FMT_SGBRG10_1X10,
-               .dt =                   CSI2DC_DT_RAW10,
-       }, {
-               .mbus_code =            MEDIA_BUS_FMT_YUYV8_2X8,
-               .dt =                   CSI2DC_DT_YUV422_8B,
-       },
-};
-
-enum mipi_csi_pads {
-       CSI2DC_PAD_SINK                 = 0,
-       CSI2DC_PAD_SOURCE               = 1,
-       CSI2DC_PADS_NUM                 = 2,
-};
-
-/*
- * struct csi2dc_device - CSI2DC device driver data/config struct
- * @base:              Register map base address
- * @csi2dc_sd:         v4l2 subdevice for the csi2dc device
- *                     This is the subdevice that the csi2dc device itself
- *                     registers in v4l2 subsystem
- * @dev:               struct device for this csi2dc device
- * @pclk:              Peripheral clock reference
- *                     Input clock that clocks the hardware block internal
- *                     logic
- * @scck:              Sensor Controller clock reference
- *                     Input clock that is used to generate the pixel clock
- * @format:            Current saved format used in g/s fmt
- * @cur_fmt:           Current state format
- * @try_fmt:           Try format that is being tried
- * @pads:              Media entity pads for the csi2dc subdevice
- * @clk_gated:         Whether the clock is gated or free running
- * @video_pipe:                Whether video pipeline is configured
- * @parallel_mode:     The underlying subdevice is connected on a parallel bus
- * @vc:                        Current set virtual channel
- * @notifier:          Async notifier that is used to bound the underlying
- *                     subdevice to the csi2dc subdevice
- * @input_sd:          Reference to the underlying subdevice bound to the
- *                     csi2dc subdevice
- * @remote_pad:                Pad number of the underlying subdevice that is linked
- *                     to the csi2dc subdevice sink pad.
- */
-struct csi2dc_device {
-       void __iomem                    *base;
-       struct v4l2_subdev              csi2dc_sd;
-       struct device                   *dev;
-       struct clk                      *pclk;
-       struct clk                      *scck;
-
-       struct v4l2_mbus_framefmt        format;
-
-       const struct csi2dc_format      *cur_fmt;
-       const struct csi2dc_format      *try_fmt;
-
-       struct media_pad                pads[CSI2DC_PADS_NUM];
-
-       bool                            clk_gated;
-       bool                            video_pipe;
-       bool                            parallel_mode;
-       u32                             vc;
-
-       struct v4l2_async_notifier      notifier;
-
-       struct v4l2_subdev              *input_sd;
-
-       u32                             remote_pad;
-};
-
-static inline struct csi2dc_device *
-csi2dc_sd_to_csi2dc_device(struct v4l2_subdev *csi2dc_sd)
-{
-       return container_of(csi2dc_sd, struct csi2dc_device, csi2dc_sd);
-}
-
-static int csi2dc_enum_mbus_code(struct v4l2_subdev *csi2dc_sd,
-                                struct v4l2_subdev_state *sd_state,
-                                struct v4l2_subdev_mbus_code_enum *code)
-{
-       if (code->index >= ARRAY_SIZE(csi2dc_formats))
-               return -EINVAL;
-
-       code->code = csi2dc_formats[code->index].mbus_code;
-
-       return 0;
-}
-
-static int csi2dc_get_fmt(struct v4l2_subdev *csi2dc_sd,
-                         struct v4l2_subdev_state *sd_state,
-                         struct v4l2_subdev_format *format)
-{
-       struct csi2dc_device *csi2dc = csi2dc_sd_to_csi2dc_device(csi2dc_sd);
-       struct v4l2_mbus_framefmt *v4l2_try_fmt;
-
-       if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
-               v4l2_try_fmt = v4l2_subdev_get_try_format(csi2dc_sd, sd_state,
-                                                         format->pad);
-               format->format = *v4l2_try_fmt;
-
-               return 0;
-       }
-
-       format->format = csi2dc->format;
-
-       return 0;
-}
-
-static int csi2dc_set_fmt(struct v4l2_subdev *csi2dc_sd,
-                         struct v4l2_subdev_state *sd_state,
-                         struct v4l2_subdev_format *req_fmt)
-{
-       struct csi2dc_device *csi2dc = csi2dc_sd_to_csi2dc_device(csi2dc_sd);
-       const struct csi2dc_format *fmt, *try_fmt = NULL;
-       struct v4l2_mbus_framefmt *v4l2_try_fmt;
-       unsigned int i;
-
-       /*
-        * Setting the source pad is disabled.
-        * The same format is being propagated from the sink to source.
-        */
-       if (req_fmt->pad == CSI2DC_PAD_SOURCE)
-               return -EINVAL;
-
-       for (i = 0; i < ARRAY_SIZE(csi2dc_formats);  i++) {
-               fmt = &csi2dc_formats[i];
-               if (req_fmt->format.code == fmt->mbus_code)
-                       try_fmt = fmt;
-               fmt++;
-       }
-
-       /* in case we could not find the desired format, default to something */
-       if (!try_fmt) {
-               try_fmt = &csi2dc_formats[0];
-
-               dev_dbg(csi2dc->dev,
-                       "CSI2DC unsupported format 0x%x, defaulting to 0x%x\n",
-                       req_fmt->format.code, csi2dc_formats[0].mbus_code);
-       }
-
-       req_fmt->format.code = try_fmt->mbus_code;
-       req_fmt->format.colorspace = V4L2_COLORSPACE_SRGB;
-       req_fmt->format.field = V4L2_FIELD_NONE;
-
-       if (req_fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
-               v4l2_try_fmt = v4l2_subdev_get_try_format(csi2dc_sd, sd_state,
-                                                         req_fmt->pad);
-               *v4l2_try_fmt = req_fmt->format;
-               /* Trying on the sink pad makes the source pad change too */
-               v4l2_try_fmt = v4l2_subdev_get_try_format(csi2dc_sd,
-                                                         sd_state,
-                                                         CSI2DC_PAD_SOURCE);
-               *v4l2_try_fmt = req_fmt->format;
-
-               /* if we are just trying, we are done */
-               return 0;
-       }
-
-       /* save the format for later requests */
-       csi2dc->format = req_fmt->format;
-
-       /* update config */
-       csi2dc->cur_fmt = try_fmt;
-
-       dev_dbg(csi2dc->dev, "new format set: 0x%x @%dx%d\n",
-               csi2dc->format.code, csi2dc->format.width,
-               csi2dc->format.height);
-
-       return 0;
-}
-
-static int csi2dc_power(struct csi2dc_device *csi2dc, int on)
-{
-       int ret = 0;
-
-       if (on) {
-               ret = clk_prepare_enable(csi2dc->pclk);
-               if (ret) {
-                       dev_err(csi2dc->dev, "failed to enable pclk:%d\n", ret);
-                       return ret;
-               }
-
-               ret = clk_prepare_enable(csi2dc->scck);
-               if (ret) {
-                       dev_err(csi2dc->dev, "failed to enable scck:%d\n", ret);
-                       clk_disable_unprepare(csi2dc->pclk);
-                       return ret;
-               }
-
-               /* if powering up, deassert reset line */
-               csi2dc_writel(csi2dc, CSI2DC_GCTLR, CSI2DC_GCTLR_SWRST);
-       } else {
-               /* if powering down, assert reset line */
-               csi2dc_writel(csi2dc, CSI2DC_GCTLR, 0);
-
-               clk_disable_unprepare(csi2dc->scck);
-               clk_disable_unprepare(csi2dc->pclk);
-       }
-
-       return ret;
-}
-
-static int csi2dc_get_mbus_config(struct csi2dc_device *csi2dc)
-{
-       struct v4l2_mbus_config mbus_config = { 0 };
-       int ret;
-
-       ret = v4l2_subdev_call(csi2dc->input_sd, pad, get_mbus_config,
-                              csi2dc->remote_pad, &mbus_config);
-       if (ret == -ENOIOCTLCMD) {
-               dev_dbg(csi2dc->dev,
-                       "no remote mbus configuration available\n");
-               return 0;
-       }
-
-       if (ret) {
-               dev_err(csi2dc->dev,
-                       "failed to get remote mbus configuration\n");
-               return 0;
-       }
-
-       dev_dbg(csi2dc->dev, "subdev sending on channel %d\n", csi2dc->vc);
-
-       csi2dc->clk_gated = mbus_config.bus.parallel.flags &
-                               V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK;
-
-       dev_dbg(csi2dc->dev, "mbus_config: %s clock\n",
-               csi2dc->clk_gated ? "gated" : "free running");
-
-       return 0;
-}
-
-static void csi2dc_vp_update(struct csi2dc_device *csi2dc)
-{
-       u32 vp, gcfg;
-
-       if (!csi2dc->video_pipe) {
-               dev_err(csi2dc->dev, "video pipeline unavailable\n");
-               return;
-       }
-
-       if (csi2dc->parallel_mode) {
-               /* In parallel mode, GPIO parallel interface must be selected */
-               gcfg = csi2dc_readl(csi2dc, CSI2DC_GCFG);
-               gcfg |= CSI2DC_GCFG_GPIOSEL;
-               csi2dc_writel(csi2dc, CSI2DC_GCFG, gcfg);
-               return;
-       }
-
-       /* serial video pipeline */
-
-       csi2dc_writel(csi2dc, CSI2DC_GCFG,
-                     (SAMA7G5_HLC & CSI2DC_GCFG_HLC_MASK) |
-                     (csi2dc->clk_gated ? 0 : CSI2DC_GCFG_MIPIFRN));
-
-       vp = CSI2DC_VPCFG_DT(csi2dc->cur_fmt->dt) & CSI2DC_VPCFG_DT_MASK;
-       vp |= CSI2DC_VPCFG_VC(csi2dc->vc) & CSI2DC_VPCFG_VC_MASK;
-       vp &= ~CSI2DC_VPCFG_DE;
-       vp |= CSI2DC_VPCFG_DM(CSI2DC_VPCFG_DM_DECODER8TO12);
-       vp &= ~CSI2DC_VPCFG_DP2;
-       vp &= ~CSI2DC_VPCFG_RMS;
-       vp |= CSI2DC_VPCFG_PA;
-
-       csi2dc_writel(csi2dc, CSI2DC_VPCFG, vp);
-       csi2dc_writel(csi2dc, CSI2DC_VPE, CSI2DC_VPE_ENABLE);
-       csi2dc_writel(csi2dc, CSI2DC_PU, CSI2DC_PU_VP);
-}
-
-static int csi2dc_s_stream(struct v4l2_subdev *csi2dc_sd, int enable)
-{
-       struct csi2dc_device *csi2dc = csi2dc_sd_to_csi2dc_device(csi2dc_sd);
-       int ret;
-
-       if (enable) {
-               ret = pm_runtime_resume_and_get(csi2dc->dev);
-               if (ret < 0)
-                       return ret;
-
-               csi2dc_get_mbus_config(csi2dc);
-
-               csi2dc_vp_update(csi2dc);
-
-               return v4l2_subdev_call(csi2dc->input_sd, video, s_stream,
-                                       true);
-       }
-
-       dev_dbg(csi2dc->dev,
-               "Last frame received: VPCOLR = %u, VPROWR= %u, VPISR = %x\n",
-               csi2dc_readl(csi2dc, CSI2DC_VPCOL),
-               csi2dc_readl(csi2dc, CSI2DC_VPROW),
-               csi2dc_readl(csi2dc, CSI2DC_VPISR));
-
-       /* stop streaming scenario */
-       ret = v4l2_subdev_call(csi2dc->input_sd, video, s_stream, false);
-
-       pm_runtime_put_sync(csi2dc->dev);
-
-       return ret;
-}
-
-static int csi2dc_init_cfg(struct v4l2_subdev *csi2dc_sd,
-                          struct v4l2_subdev_state *sd_state)
-{
-       struct v4l2_mbus_framefmt *v4l2_try_fmt =
-               v4l2_subdev_get_try_format(csi2dc_sd, sd_state, 0);
-
-       v4l2_try_fmt->height = 480;
-       v4l2_try_fmt->width = 640;
-       v4l2_try_fmt->code = csi2dc_formats[0].mbus_code;
-       v4l2_try_fmt->colorspace = V4L2_COLORSPACE_SRGB;
-       v4l2_try_fmt->field = V4L2_FIELD_NONE;
-       v4l2_try_fmt->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
-       v4l2_try_fmt->quantization = V4L2_QUANTIZATION_DEFAULT;
-       v4l2_try_fmt->xfer_func = V4L2_XFER_FUNC_DEFAULT;
-
-       return 0;
-}
-
-static const struct media_entity_operations csi2dc_entity_ops = {
-       .link_validate = v4l2_subdev_link_validate,
-};
-
-static const struct v4l2_subdev_pad_ops csi2dc_pad_ops = {
-       .enum_mbus_code = csi2dc_enum_mbus_code,
-       .set_fmt = csi2dc_set_fmt,
-       .get_fmt = csi2dc_get_fmt,
-       .init_cfg = csi2dc_init_cfg,
-};
-
-static const struct v4l2_subdev_video_ops csi2dc_video_ops = {
-       .s_stream = csi2dc_s_stream,
-};
-
-static const struct v4l2_subdev_ops csi2dc_subdev_ops = {
-       .pad = &csi2dc_pad_ops,
-       .video = &csi2dc_video_ops,
-};
-
-static int csi2dc_async_bound(struct v4l2_async_notifier *notifier,
-                             struct v4l2_subdev *subdev,
-                             struct v4l2_async_subdev *asd)
-{
-       struct csi2dc_device *csi2dc = container_of(notifier,
-                                               struct csi2dc_device, notifier);
-       int pad;
-       int ret;
-
-       csi2dc->input_sd = subdev;
-
-       pad = media_entity_get_fwnode_pad(&subdev->entity, asd->match.fwnode,
-                                         MEDIA_PAD_FL_SOURCE);
-       if (pad < 0) {
-               dev_err(csi2dc->dev, "Failed to find pad for %s\n",
-                       subdev->name);
-               return pad;
-       }
-
-       csi2dc->remote_pad = pad;
-
-       ret = media_create_pad_link(&csi2dc->input_sd->entity,
-                                   csi2dc->remote_pad,
-                                   &csi2dc->csi2dc_sd.entity, 0,
-                                   MEDIA_LNK_FL_ENABLED);
-       if (ret) {
-               dev_err(csi2dc->dev,
-                       "Failed to create pad link: %s to %s\n",
-                       csi2dc->input_sd->entity.name,
-                       csi2dc->csi2dc_sd.entity.name);
-               return ret;
-       }
-
-       dev_dbg(csi2dc->dev, "link with %s pad: %d\n",
-               csi2dc->input_sd->name, csi2dc->remote_pad);
-
-       return ret;
-}
-
-static const struct v4l2_async_notifier_operations csi2dc_async_ops = {
-       .bound = csi2dc_async_bound,
-};
-
-static int csi2dc_prepare_notifier(struct csi2dc_device *csi2dc,
-                                  struct fwnode_handle *input_fwnode)
-{
-       struct v4l2_async_subdev *asd;
-       int ret = 0;
-
-       v4l2_async_nf_init(&csi2dc->notifier);
-
-       asd = v4l2_async_nf_add_fwnode_remote(&csi2dc->notifier,
-                                             input_fwnode,
-                                             struct v4l2_async_subdev);
-
-       fwnode_handle_put(input_fwnode);
-
-       if (IS_ERR(asd)) {
-               ret = PTR_ERR(asd);
-               dev_err(csi2dc->dev,
-                       "failed to add async notifier for node %pOF: %d\n",
-                       to_of_node(input_fwnode), ret);
-               v4l2_async_nf_cleanup(&csi2dc->notifier);
-               return ret;
-       }
-
-       csi2dc->notifier.ops = &csi2dc_async_ops;
-
-       ret = v4l2_async_subdev_nf_register(&csi2dc->csi2dc_sd,
-                                           &csi2dc->notifier);
-       if (ret) {
-               dev_err(csi2dc->dev, "fail to register async notifier: %d\n",
-                       ret);
-               v4l2_async_nf_cleanup(&csi2dc->notifier);
-       }
-
-       return ret;
-}
-
-static int csi2dc_of_parse(struct csi2dc_device *csi2dc,
-                          struct device_node *of_node)
-{
-       struct fwnode_handle *input_fwnode, *output_fwnode;
-       struct v4l2_fwnode_endpoint input_endpoint = { 0 },
-                                   output_endpoint = { 0 };
-       int ret;
-
-       input_fwnode = fwnode_graph_get_next_endpoint(of_fwnode_handle(of_node),
-                                                     NULL);
-       if (!input_fwnode) {
-               dev_err(csi2dc->dev,
-                       "missing port node at %pOF, input node is mandatory.\n",
-                       of_node);
-               return -EINVAL;
-       }
-
-       ret = v4l2_fwnode_endpoint_parse(input_fwnode, &input_endpoint);
-       if (ret) {
-               dev_err(csi2dc->dev, "endpoint not defined at %pOF\n", of_node);
-               goto csi2dc_of_parse_err;
-       }
-
-       if (input_endpoint.bus_type == V4L2_MBUS_PARALLEL ||
-           input_endpoint.bus_type == V4L2_MBUS_BT656) {
-               csi2dc->parallel_mode = true;
-               dev_dbg(csi2dc->dev,
-                       "subdevice connected on parallel interface\n");
-       }
-
-       if (input_endpoint.bus_type == V4L2_MBUS_CSI2_DPHY) {
-               csi2dc->clk_gated = input_endpoint.bus.mipi_csi2.flags &
-                                       V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK;
-               dev_dbg(csi2dc->dev,
-                       "subdevice connected on serial interface\n");
-               dev_dbg(csi2dc->dev, "DT: %s clock\n",
-                       csi2dc->clk_gated ? "gated" : "free running");
-       }
-
-       output_fwnode = fwnode_graph_get_next_endpoint
-                               (of_fwnode_handle(of_node), input_fwnode);
-
-       if (output_fwnode)
-               ret = v4l2_fwnode_endpoint_parse(output_fwnode,
-                                                &output_endpoint);
-
-       fwnode_handle_put(output_fwnode);
-
-       if (!output_fwnode || ret) {
-               dev_info(csi2dc->dev,
-                        "missing output node at %pOF, data pipe available only.\n",
-                        of_node);
-       } else {
-               if (output_endpoint.bus_type != V4L2_MBUS_PARALLEL &&
-                   output_endpoint.bus_type != V4L2_MBUS_BT656) {
-                       dev_err(csi2dc->dev,
-                               "output port must be parallel/bt656.\n");
-                       ret = -EINVAL;
-                       goto csi2dc_of_parse_err;
-               }
-
-               csi2dc->video_pipe = true;
-
-               dev_dbg(csi2dc->dev,
-                       "block %pOF [%d.%d]->[%d.%d] video pipeline\n",
-                       of_node, input_endpoint.base.port,
-                       input_endpoint.base.id, output_endpoint.base.port,
-                       output_endpoint.base.id);
-       }
-
-       /* prepare async notifier for subdevice completion */
-       return csi2dc_prepare_notifier(csi2dc, input_fwnode);
-
-csi2dc_of_parse_err:
-       fwnode_handle_put(input_fwnode);
-       return ret;
-}
-
-static void csi2dc_default_format(struct csi2dc_device *csi2dc)
-{
-       csi2dc->cur_fmt = &csi2dc_formats[0];
-
-       csi2dc->format.height = 480;
-       csi2dc->format.width = 640;
-       csi2dc->format.code = csi2dc_formats[0].mbus_code;
-       csi2dc->format.colorspace = V4L2_COLORSPACE_SRGB;
-       csi2dc->format.field = V4L2_FIELD_NONE;
-       csi2dc->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
-       csi2dc->format.quantization = V4L2_QUANTIZATION_DEFAULT;
-       csi2dc->format.xfer_func = V4L2_XFER_FUNC_DEFAULT;
-}
-
-static int csi2dc_probe(struct platform_device *pdev)
-{
-       struct device *dev = &pdev->dev;
-       struct csi2dc_device *csi2dc;
-       int ret = 0;
-       u32 ver;
-
-       csi2dc = devm_kzalloc(dev, sizeof(*csi2dc), GFP_KERNEL);
-       if (!csi2dc)
-               return -ENOMEM;
-
-       csi2dc->dev = dev;
-
-       csi2dc->base = devm_platform_ioremap_resource(pdev, 0);
-       if (IS_ERR(csi2dc->base)) {
-               dev_err(dev, "base address not set\n");
-               return PTR_ERR(csi2dc->base);
-       }
-
-       csi2dc->pclk = devm_clk_get(dev, "pclk");
-       if (IS_ERR(csi2dc->pclk)) {
-               ret = PTR_ERR(csi2dc->pclk);
-               dev_err(dev, "failed to get pclk: %d\n", ret);
-               return ret;
-       }
-
-       csi2dc->scck = devm_clk_get(dev, "scck");
-       if (IS_ERR(csi2dc->scck)) {
-               ret = PTR_ERR(csi2dc->scck);
-               dev_err(dev, "failed to get scck: %d\n", ret);
-               return ret;
-       }
-
-       v4l2_subdev_init(&csi2dc->csi2dc_sd, &csi2dc_subdev_ops);
-
-       csi2dc->csi2dc_sd.owner = THIS_MODULE;
-       csi2dc->csi2dc_sd.dev = dev;
-       snprintf(csi2dc->csi2dc_sd.name, sizeof(csi2dc->csi2dc_sd.name),
-                "csi2dc");
-
-       csi2dc->csi2dc_sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
-       csi2dc->csi2dc_sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
-       csi2dc->csi2dc_sd.entity.ops = &csi2dc_entity_ops;
-
-       platform_set_drvdata(pdev, csi2dc);
-
-       ret = csi2dc_of_parse(csi2dc, dev->of_node);
-       if (ret)
-               goto csi2dc_probe_cleanup_entity;
-
-       csi2dc->pads[CSI2DC_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
-       if (csi2dc->video_pipe)
-               csi2dc->pads[CSI2DC_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
-
-       ret = media_entity_pads_init(&csi2dc->csi2dc_sd.entity,
-                                    csi2dc->video_pipe ? CSI2DC_PADS_NUM : 1,
-                                    csi2dc->pads);
-       if (ret < 0) {
-               dev_err(dev, "media entity init failed\n");
-               goto csi2dc_probe_cleanup_notifier;
-       }
-
-       csi2dc_default_format(csi2dc);
-
-       /* turn power on to validate capabilities */
-       ret = csi2dc_power(csi2dc, true);
-       if (ret < 0)
-               goto csi2dc_probe_cleanup_notifier;
-
-       pm_runtime_set_active(dev);
-       pm_runtime_enable(dev);
-       ver = csi2dc_readl(csi2dc, CSI2DC_VERSION);
-
-       /*
-        * we must register the subdev after PM runtime has been requested,
-        * otherwise we might bound immediately and request pm_runtime_resume
-        * before runtime_enable.
-        */
-       ret = v4l2_async_register_subdev(&csi2dc->csi2dc_sd);
-       if (ret) {
-               dev_err(csi2dc->dev, "failed to register the subdevice\n");
-               goto csi2dc_probe_cleanup_notifier;
-       }
-
-       dev_info(dev, "Microchip CSI2DC version %x\n", ver);
-
-       return 0;
-
-csi2dc_probe_cleanup_notifier:
-       v4l2_async_nf_cleanup(&csi2dc->notifier);
-csi2dc_probe_cleanup_entity:
-       media_entity_cleanup(&csi2dc->csi2dc_sd.entity);
-
-       return ret;
-}
-
-static int csi2dc_remove(struct platform_device *pdev)
-{
-       struct csi2dc_device *csi2dc = platform_get_drvdata(pdev);
-
-       pm_runtime_disable(&pdev->dev);
-
-       v4l2_async_unregister_subdev(&csi2dc->csi2dc_sd);
-       v4l2_async_nf_unregister(&csi2dc->notifier);
-       v4l2_async_nf_cleanup(&csi2dc->notifier);
-       media_entity_cleanup(&csi2dc->csi2dc_sd.entity);
-
-       return 0;
-}
-
-static int __maybe_unused csi2dc_runtime_suspend(struct device *dev)
-{
-       struct csi2dc_device *csi2dc = dev_get_drvdata(dev);
-
-       return csi2dc_power(csi2dc, false);
-}
-
-static int __maybe_unused csi2dc_runtime_resume(struct device *dev)
-{
-       struct csi2dc_device *csi2dc = dev_get_drvdata(dev);
-
-       return csi2dc_power(csi2dc, true);
-}
-
-static const struct dev_pm_ops csi2dc_dev_pm_ops = {
-       SET_RUNTIME_PM_OPS(csi2dc_runtime_suspend, csi2dc_runtime_resume, NULL)
-};
-
-static const struct of_device_id csi2dc_of_match[] = {
-       { .compatible = "microchip,sama7g5-csi2dc" },
-       { }
-};
-
-MODULE_DEVICE_TABLE(of, csi2dc_of_match);
-
-static struct platform_driver csi2dc_driver = {
-       .probe  = csi2dc_probe,
-       .remove = csi2dc_remove,
-       .driver = {
-               .name =                 "microchip-csi2dc",
-               .pm =                   &csi2dc_dev_pm_ops,
-               .of_match_table =       of_match_ptr(csi2dc_of_match),
-       },
-};
-
-module_platform_driver(csi2dc_driver);
-
-MODULE_AUTHOR("Eugen Hristev <eugen.hristev@microchip.com>");
-MODULE_DESCRIPTION("Microchip CSI2 Demux Controller driver");
-MODULE_LICENSE("GPL v2");
 
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only
+
+comment "Microchip Technology, Inc. media platform drivers"
+
+config VIDEO_MICROCHIP_CSI2DC
+       tristate "Microchip CSI2 Demux Controller"
+       depends on V4L_PLATFORM_DRIVERS
+       depends on VIDEO_DEV && COMMON_CLK && OF
+       depends on ARCH_AT91 || COMPILE_TEST
+       select MEDIA_CONTROLLER
+       select VIDEO_V4L2_SUBDEV_API
+       select V4L2_FWNODE
+       help
+         CSI2 Demux Controller driver. CSI2DC is a helper chip
+         that converts IDI interface byte stream to a parallel pixel stream.
+         It supports various RAW formats as input.
+
+         To compile this driver as a module, choose M here: the
+         module will be called microchip-csi2dc.
 
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only
+
+obj-$(CONFIG_VIDEO_MICROCHIP_CSI2DC) += microchip-csi2dc.o
 
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Microchip CSI2 Demux Controller (CSI2DC) driver
+ *
+ * Copyright (C) 2018 Microchip Technology, Inc.
+ *
+ * Author: Eugen Hristev <eugen.hristev@microchip.com>
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of_graph.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/videodev2.h>
+
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-subdev.h>
+
+/* Global configuration register */
+#define CSI2DC_GCFG                    0x0
+
+/* MIPI sensor pixel clock is free running */
+#define CSI2DC_GCFG_MIPIFRN            BIT(0)
+/* GPIO parallel interface selection */
+#define CSI2DC_GCFG_GPIOSEL            BIT(1)
+/* Output waveform inter-line minimum delay */
+#define CSI2DC_GCFG_HLC(v)             ((v) << 4)
+#define CSI2DC_GCFG_HLC_MASK           GENMASK(7, 4)
+/* SAMA7G5 requires a HLC delay of 15 */
+#define SAMA7G5_HLC                    (15)
+
+/* Global control register */
+#define CSI2DC_GCTLR                   0x04
+#define CSI2DC_GCTLR_SWRST             BIT(0)
+
+/* Global status register */
+#define CSI2DC_GS                      0x08
+
+/* SSP interrupt status register */
+#define CSI2DC_SSPIS                   0x28
+/* Pipe update register */
+#define CSI2DC_PU                      0xc0
+/* Video pipe attributes update */
+#define CSI2DC_PU_VP                   BIT(0)
+
+/* Pipe update status register */
+#define CSI2DC_PUS                     0xc4
+
+/* Video pipeline Interrupt Status Register */
+#define CSI2DC_VPISR                   0xf4
+
+/* Video pipeline enable register */
+#define CSI2DC_VPE                     0xf8
+#define CSI2DC_VPE_ENABLE              BIT(0)
+
+/* Video pipeline configuration register */
+#define CSI2DC_VPCFG                   0xfc
+/* Data type */
+#define CSI2DC_VPCFG_DT(v)             ((v) << 0)
+#define CSI2DC_VPCFG_DT_MASK           GENMASK(5, 0)
+/* Virtual channel identifier */
+#define CSI2DC_VPCFG_VC(v)             ((v) << 6)
+#define CSI2DC_VPCFG_VC_MASK           GENMASK(7, 6)
+/* Decompression enable */
+#define CSI2DC_VPCFG_DE                        BIT(8)
+/* Decoder mode */
+#define CSI2DC_VPCFG_DM(v)             ((v) << 9)
+#define CSI2DC_VPCFG_DM_DECODER8TO12   0
+/* Decoder predictor 2 selection */
+#define CSI2DC_VPCFG_DP2               BIT(12)
+/* Recommended memory storage */
+#define CSI2DC_VPCFG_RMS               BIT(13)
+/* Post adjustment */
+#define CSI2DC_VPCFG_PA                        BIT(14)
+
+/* Video pipeline column register */
+#define CSI2DC_VPCOL                   0x100
+/* Column number */
+#define CSI2DC_VPCOL_COL(v)            ((v) << 0)
+#define CSI2DC_VPCOL_COL_MASK          GENMASK(15, 0)
+
+/* Video pipeline row register */
+#define CSI2DC_VPROW                   0x104
+/* Row number */
+#define CSI2DC_VPROW_ROW(v)            ((v) << 0)
+#define CSI2DC_VPROW_ROW_MASK          GENMASK(15, 0)
+
+/* Version register */
+#define CSI2DC_VERSION                 0x1fc
+
+/* register read/write helpers */
+#define csi2dc_readl(st, reg)          readl_relaxed((st)->base + (reg))
+#define csi2dc_writel(st, reg, val)    writel_relaxed((val), \
+                                       (st)->base + (reg))
+
+/* supported RAW data types */
+#define CSI2DC_DT_RAW6                 0x28
+#define CSI2DC_DT_RAW7                 0x29
+#define CSI2DC_DT_RAW8                 0x2a
+#define CSI2DC_DT_RAW10                        0x2b
+#define CSI2DC_DT_RAW12                        0x2c
+#define CSI2DC_DT_RAW14                        0x2d
+/* YUV data types */
+#define CSI2DC_DT_YUV422_8B            0x1e
+
+/*
+ * struct csi2dc_format - CSI2DC format type struct
+ * @mbus_code:         Media bus code for the format
+ * @dt:                        Data type constant for this format
+ */
+struct csi2dc_format {
+       u32                             mbus_code;
+       u32                             dt;
+};
+
+static const struct csi2dc_format csi2dc_formats[] = {
+       {
+               .mbus_code =            MEDIA_BUS_FMT_SRGGB8_1X8,
+               .dt =                   CSI2DC_DT_RAW8,
+       }, {
+               .mbus_code =            MEDIA_BUS_FMT_SBGGR8_1X8,
+               .dt =                   CSI2DC_DT_RAW8,
+       }, {
+               .mbus_code =            MEDIA_BUS_FMT_SGRBG8_1X8,
+               .dt =                   CSI2DC_DT_RAW8,
+       }, {
+               .mbus_code =            MEDIA_BUS_FMT_SGBRG8_1X8,
+               .dt =                   CSI2DC_DT_RAW8,
+       }, {
+               .mbus_code =            MEDIA_BUS_FMT_SRGGB10_1X10,
+               .dt =                   CSI2DC_DT_RAW10,
+       }, {
+               .mbus_code =            MEDIA_BUS_FMT_SBGGR10_1X10,
+               .dt =                   CSI2DC_DT_RAW10,
+       }, {
+               .mbus_code =            MEDIA_BUS_FMT_SGRBG10_1X10,
+               .dt =                   CSI2DC_DT_RAW10,
+       }, {
+               .mbus_code =            MEDIA_BUS_FMT_SGBRG10_1X10,
+               .dt =                   CSI2DC_DT_RAW10,
+       }, {
+               .mbus_code =            MEDIA_BUS_FMT_YUYV8_2X8,
+               .dt =                   CSI2DC_DT_YUV422_8B,
+       },
+};
+
+enum mipi_csi_pads {
+       CSI2DC_PAD_SINK                 = 0,
+       CSI2DC_PAD_SOURCE               = 1,
+       CSI2DC_PADS_NUM                 = 2,
+};
+
+/*
+ * struct csi2dc_device - CSI2DC device driver data/config struct
+ * @base:              Register map base address
+ * @csi2dc_sd:         v4l2 subdevice for the csi2dc device
+ *                     This is the subdevice that the csi2dc device itself
+ *                     registers in v4l2 subsystem
+ * @dev:               struct device for this csi2dc device
+ * @pclk:              Peripheral clock reference
+ *                     Input clock that clocks the hardware block internal
+ *                     logic
+ * @scck:              Sensor Controller clock reference
+ *                     Input clock that is used to generate the pixel clock
+ * @format:            Current saved format used in g/s fmt
+ * @cur_fmt:           Current state format
+ * @try_fmt:           Try format that is being tried
+ * @pads:              Media entity pads for the csi2dc subdevice
+ * @clk_gated:         Whether the clock is gated or free running
+ * @video_pipe:                Whether video pipeline is configured
+ * @parallel_mode:     The underlying subdevice is connected on a parallel bus
+ * @vc:                        Current set virtual channel
+ * @notifier:          Async notifier that is used to bound the underlying
+ *                     subdevice to the csi2dc subdevice
+ * @input_sd:          Reference to the underlying subdevice bound to the
+ *                     csi2dc subdevice
+ * @remote_pad:                Pad number of the underlying subdevice that is linked
+ *                     to the csi2dc subdevice sink pad.
+ */
+struct csi2dc_device {
+       void __iomem                    *base;
+       struct v4l2_subdev              csi2dc_sd;
+       struct device                   *dev;
+       struct clk                      *pclk;
+       struct clk                      *scck;
+
+       struct v4l2_mbus_framefmt        format;
+
+       const struct csi2dc_format      *cur_fmt;
+       const struct csi2dc_format      *try_fmt;
+
+       struct media_pad                pads[CSI2DC_PADS_NUM];
+
+       bool                            clk_gated;
+       bool                            video_pipe;
+       bool                            parallel_mode;
+       u32                             vc;
+
+       struct v4l2_async_notifier      notifier;
+
+       struct v4l2_subdev              *input_sd;
+
+       u32                             remote_pad;
+};
+
+static inline struct csi2dc_device *
+csi2dc_sd_to_csi2dc_device(struct v4l2_subdev *csi2dc_sd)
+{
+       return container_of(csi2dc_sd, struct csi2dc_device, csi2dc_sd);
+}
+
+static int csi2dc_enum_mbus_code(struct v4l2_subdev *csi2dc_sd,
+                                struct v4l2_subdev_state *sd_state,
+                                struct v4l2_subdev_mbus_code_enum *code)
+{
+       if (code->index >= ARRAY_SIZE(csi2dc_formats))
+               return -EINVAL;
+
+       code->code = csi2dc_formats[code->index].mbus_code;
+
+       return 0;
+}
+
+static int csi2dc_get_fmt(struct v4l2_subdev *csi2dc_sd,
+                         struct v4l2_subdev_state *sd_state,
+                         struct v4l2_subdev_format *format)
+{
+       struct csi2dc_device *csi2dc = csi2dc_sd_to_csi2dc_device(csi2dc_sd);
+       struct v4l2_mbus_framefmt *v4l2_try_fmt;
+
+       if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
+               v4l2_try_fmt = v4l2_subdev_get_try_format(csi2dc_sd, sd_state,
+                                                         format->pad);
+               format->format = *v4l2_try_fmt;
+
+               return 0;
+       }
+
+       format->format = csi2dc->format;
+
+       return 0;
+}
+
+static int csi2dc_set_fmt(struct v4l2_subdev *csi2dc_sd,
+                         struct v4l2_subdev_state *sd_state,
+                         struct v4l2_subdev_format *req_fmt)
+{
+       struct csi2dc_device *csi2dc = csi2dc_sd_to_csi2dc_device(csi2dc_sd);
+       const struct csi2dc_format *fmt, *try_fmt = NULL;
+       struct v4l2_mbus_framefmt *v4l2_try_fmt;
+       unsigned int i;
+
+       /*
+        * Setting the source pad is disabled.
+        * The same format is being propagated from the sink to source.
+        */
+       if (req_fmt->pad == CSI2DC_PAD_SOURCE)
+               return -EINVAL;
+
+       for (i = 0; i < ARRAY_SIZE(csi2dc_formats);  i++) {
+               fmt = &csi2dc_formats[i];
+               if (req_fmt->format.code == fmt->mbus_code)
+                       try_fmt = fmt;
+               fmt++;
+       }
+
+       /* in case we could not find the desired format, default to something */
+       if (!try_fmt) {
+               try_fmt = &csi2dc_formats[0];
+
+               dev_dbg(csi2dc->dev,
+                       "CSI2DC unsupported format 0x%x, defaulting to 0x%x\n",
+                       req_fmt->format.code, csi2dc_formats[0].mbus_code);
+       }
+
+       req_fmt->format.code = try_fmt->mbus_code;
+       req_fmt->format.colorspace = V4L2_COLORSPACE_SRGB;
+       req_fmt->format.field = V4L2_FIELD_NONE;
+
+       if (req_fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
+               v4l2_try_fmt = v4l2_subdev_get_try_format(csi2dc_sd, sd_state,
+                                                         req_fmt->pad);
+               *v4l2_try_fmt = req_fmt->format;
+               /* Trying on the sink pad makes the source pad change too */
+               v4l2_try_fmt = v4l2_subdev_get_try_format(csi2dc_sd,
+                                                         sd_state,
+                                                         CSI2DC_PAD_SOURCE);
+               *v4l2_try_fmt = req_fmt->format;
+
+               /* if we are just trying, we are done */
+               return 0;
+       }
+
+       /* save the format for later requests */
+       csi2dc->format = req_fmt->format;
+
+       /* update config */
+       csi2dc->cur_fmt = try_fmt;
+
+       dev_dbg(csi2dc->dev, "new format set: 0x%x @%dx%d\n",
+               csi2dc->format.code, csi2dc->format.width,
+               csi2dc->format.height);
+
+       return 0;
+}
+
+static int csi2dc_power(struct csi2dc_device *csi2dc, int on)
+{
+       int ret = 0;
+
+       if (on) {
+               ret = clk_prepare_enable(csi2dc->pclk);
+               if (ret) {
+                       dev_err(csi2dc->dev, "failed to enable pclk:%d\n", ret);
+                       return ret;
+               }
+
+               ret = clk_prepare_enable(csi2dc->scck);
+               if (ret) {
+                       dev_err(csi2dc->dev, "failed to enable scck:%d\n", ret);
+                       clk_disable_unprepare(csi2dc->pclk);
+                       return ret;
+               }
+
+               /* if powering up, deassert reset line */
+               csi2dc_writel(csi2dc, CSI2DC_GCTLR, CSI2DC_GCTLR_SWRST);
+       } else {
+               /* if powering down, assert reset line */
+               csi2dc_writel(csi2dc, CSI2DC_GCTLR, 0);
+
+               clk_disable_unprepare(csi2dc->scck);
+               clk_disable_unprepare(csi2dc->pclk);
+       }
+
+       return ret;
+}
+
+static int csi2dc_get_mbus_config(struct csi2dc_device *csi2dc)
+{
+       struct v4l2_mbus_config mbus_config = { 0 };
+       int ret;
+
+       ret = v4l2_subdev_call(csi2dc->input_sd, pad, get_mbus_config,
+                              csi2dc->remote_pad, &mbus_config);
+       if (ret == -ENOIOCTLCMD) {
+               dev_dbg(csi2dc->dev,
+                       "no remote mbus configuration available\n");
+               return 0;
+       }
+
+       if (ret) {
+               dev_err(csi2dc->dev,
+                       "failed to get remote mbus configuration\n");
+               return 0;
+       }
+
+       dev_dbg(csi2dc->dev, "subdev sending on channel %d\n", csi2dc->vc);
+
+       csi2dc->clk_gated = mbus_config.bus.parallel.flags &
+                               V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK;
+
+       dev_dbg(csi2dc->dev, "mbus_config: %s clock\n",
+               csi2dc->clk_gated ? "gated" : "free running");
+
+       return 0;
+}
+
+static void csi2dc_vp_update(struct csi2dc_device *csi2dc)
+{
+       u32 vp, gcfg;
+
+       if (!csi2dc->video_pipe) {
+               dev_err(csi2dc->dev, "video pipeline unavailable\n");
+               return;
+       }
+
+       if (csi2dc->parallel_mode) {
+               /* In parallel mode, GPIO parallel interface must be selected */
+               gcfg = csi2dc_readl(csi2dc, CSI2DC_GCFG);
+               gcfg |= CSI2DC_GCFG_GPIOSEL;
+               csi2dc_writel(csi2dc, CSI2DC_GCFG, gcfg);
+               return;
+       }
+
+       /* serial video pipeline */
+
+       csi2dc_writel(csi2dc, CSI2DC_GCFG,
+                     (SAMA7G5_HLC & CSI2DC_GCFG_HLC_MASK) |
+                     (csi2dc->clk_gated ? 0 : CSI2DC_GCFG_MIPIFRN));
+
+       vp = CSI2DC_VPCFG_DT(csi2dc->cur_fmt->dt) & CSI2DC_VPCFG_DT_MASK;
+       vp |= CSI2DC_VPCFG_VC(csi2dc->vc) & CSI2DC_VPCFG_VC_MASK;
+       vp &= ~CSI2DC_VPCFG_DE;
+       vp |= CSI2DC_VPCFG_DM(CSI2DC_VPCFG_DM_DECODER8TO12);
+       vp &= ~CSI2DC_VPCFG_DP2;
+       vp &= ~CSI2DC_VPCFG_RMS;
+       vp |= CSI2DC_VPCFG_PA;
+
+       csi2dc_writel(csi2dc, CSI2DC_VPCFG, vp);
+       csi2dc_writel(csi2dc, CSI2DC_VPE, CSI2DC_VPE_ENABLE);
+       csi2dc_writel(csi2dc, CSI2DC_PU, CSI2DC_PU_VP);
+}
+
+static int csi2dc_s_stream(struct v4l2_subdev *csi2dc_sd, int enable)
+{
+       struct csi2dc_device *csi2dc = csi2dc_sd_to_csi2dc_device(csi2dc_sd);
+       int ret;
+
+       if (enable) {
+               ret = pm_runtime_resume_and_get(csi2dc->dev);
+               if (ret < 0)
+                       return ret;
+
+               csi2dc_get_mbus_config(csi2dc);
+
+               csi2dc_vp_update(csi2dc);
+
+               return v4l2_subdev_call(csi2dc->input_sd, video, s_stream,
+                                       true);
+       }
+
+       dev_dbg(csi2dc->dev,
+               "Last frame received: VPCOLR = %u, VPROWR= %u, VPISR = %x\n",
+               csi2dc_readl(csi2dc, CSI2DC_VPCOL),
+               csi2dc_readl(csi2dc, CSI2DC_VPROW),
+               csi2dc_readl(csi2dc, CSI2DC_VPISR));
+
+       /* stop streaming scenario */
+       ret = v4l2_subdev_call(csi2dc->input_sd, video, s_stream, false);
+
+       pm_runtime_put_sync(csi2dc->dev);
+
+       return ret;
+}
+
+static int csi2dc_init_cfg(struct v4l2_subdev *csi2dc_sd,
+                          struct v4l2_subdev_state *sd_state)
+{
+       struct v4l2_mbus_framefmt *v4l2_try_fmt =
+               v4l2_subdev_get_try_format(csi2dc_sd, sd_state, 0);
+
+       v4l2_try_fmt->height = 480;
+       v4l2_try_fmt->width = 640;
+       v4l2_try_fmt->code = csi2dc_formats[0].mbus_code;
+       v4l2_try_fmt->colorspace = V4L2_COLORSPACE_SRGB;
+       v4l2_try_fmt->field = V4L2_FIELD_NONE;
+       v4l2_try_fmt->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
+       v4l2_try_fmt->quantization = V4L2_QUANTIZATION_DEFAULT;
+       v4l2_try_fmt->xfer_func = V4L2_XFER_FUNC_DEFAULT;
+
+       return 0;
+}
+
+static const struct media_entity_operations csi2dc_entity_ops = {
+       .link_validate = v4l2_subdev_link_validate,
+};
+
+static const struct v4l2_subdev_pad_ops csi2dc_pad_ops = {
+       .enum_mbus_code = csi2dc_enum_mbus_code,
+       .set_fmt = csi2dc_set_fmt,
+       .get_fmt = csi2dc_get_fmt,
+       .init_cfg = csi2dc_init_cfg,
+};
+
+static const struct v4l2_subdev_video_ops csi2dc_video_ops = {
+       .s_stream = csi2dc_s_stream,
+};
+
+static const struct v4l2_subdev_ops csi2dc_subdev_ops = {
+       .pad = &csi2dc_pad_ops,
+       .video = &csi2dc_video_ops,
+};
+
+static int csi2dc_async_bound(struct v4l2_async_notifier *notifier,
+                             struct v4l2_subdev *subdev,
+                             struct v4l2_async_subdev *asd)
+{
+       struct csi2dc_device *csi2dc = container_of(notifier,
+                                               struct csi2dc_device, notifier);
+       int pad;
+       int ret;
+
+       csi2dc->input_sd = subdev;
+
+       pad = media_entity_get_fwnode_pad(&subdev->entity, asd->match.fwnode,
+                                         MEDIA_PAD_FL_SOURCE);
+       if (pad < 0) {
+               dev_err(csi2dc->dev, "Failed to find pad for %s\n",
+                       subdev->name);
+               return pad;
+       }
+
+       csi2dc->remote_pad = pad;
+
+       ret = media_create_pad_link(&csi2dc->input_sd->entity,
+                                   csi2dc->remote_pad,
+                                   &csi2dc->csi2dc_sd.entity, 0,
+                                   MEDIA_LNK_FL_ENABLED);
+       if (ret) {
+               dev_err(csi2dc->dev,
+                       "Failed to create pad link: %s to %s\n",
+                       csi2dc->input_sd->entity.name,
+                       csi2dc->csi2dc_sd.entity.name);
+               return ret;
+       }
+
+       dev_dbg(csi2dc->dev, "link with %s pad: %d\n",
+               csi2dc->input_sd->name, csi2dc->remote_pad);
+
+       return ret;
+}
+
+static const struct v4l2_async_notifier_operations csi2dc_async_ops = {
+       .bound = csi2dc_async_bound,
+};
+
+static int csi2dc_prepare_notifier(struct csi2dc_device *csi2dc,
+                                  struct fwnode_handle *input_fwnode)
+{
+       struct v4l2_async_subdev *asd;
+       int ret = 0;
+
+       v4l2_async_nf_init(&csi2dc->notifier);
+
+       asd = v4l2_async_nf_add_fwnode_remote(&csi2dc->notifier,
+                                             input_fwnode,
+                                             struct v4l2_async_subdev);
+
+       fwnode_handle_put(input_fwnode);
+
+       if (IS_ERR(asd)) {
+               ret = PTR_ERR(asd);
+               dev_err(csi2dc->dev,
+                       "failed to add async notifier for node %pOF: %d\n",
+                       to_of_node(input_fwnode), ret);
+               v4l2_async_nf_cleanup(&csi2dc->notifier);
+               return ret;
+       }
+
+       csi2dc->notifier.ops = &csi2dc_async_ops;
+
+       ret = v4l2_async_subdev_nf_register(&csi2dc->csi2dc_sd,
+                                           &csi2dc->notifier);
+       if (ret) {
+               dev_err(csi2dc->dev, "fail to register async notifier: %d\n",
+                       ret);
+               v4l2_async_nf_cleanup(&csi2dc->notifier);
+       }
+
+       return ret;
+}
+
+static int csi2dc_of_parse(struct csi2dc_device *csi2dc,
+                          struct device_node *of_node)
+{
+       struct fwnode_handle *input_fwnode, *output_fwnode;
+       struct v4l2_fwnode_endpoint input_endpoint = { 0 },
+                                   output_endpoint = { 0 };
+       int ret;
+
+       input_fwnode = fwnode_graph_get_next_endpoint(of_fwnode_handle(of_node),
+                                                     NULL);
+       if (!input_fwnode) {
+               dev_err(csi2dc->dev,
+                       "missing port node at %pOF, input node is mandatory.\n",
+                       of_node);
+               return -EINVAL;
+       }
+
+       ret = v4l2_fwnode_endpoint_parse(input_fwnode, &input_endpoint);
+       if (ret) {
+               dev_err(csi2dc->dev, "endpoint not defined at %pOF\n", of_node);
+               goto csi2dc_of_parse_err;
+       }
+
+       if (input_endpoint.bus_type == V4L2_MBUS_PARALLEL ||
+           input_endpoint.bus_type == V4L2_MBUS_BT656) {
+               csi2dc->parallel_mode = true;
+               dev_dbg(csi2dc->dev,
+                       "subdevice connected on parallel interface\n");
+       }
+
+       if (input_endpoint.bus_type == V4L2_MBUS_CSI2_DPHY) {
+               csi2dc->clk_gated = input_endpoint.bus.mipi_csi2.flags &
+                                       V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK;
+               dev_dbg(csi2dc->dev,
+                       "subdevice connected on serial interface\n");
+               dev_dbg(csi2dc->dev, "DT: %s clock\n",
+                       csi2dc->clk_gated ? "gated" : "free running");
+       }
+
+       output_fwnode = fwnode_graph_get_next_endpoint
+                               (of_fwnode_handle(of_node), input_fwnode);
+
+       if (output_fwnode)
+               ret = v4l2_fwnode_endpoint_parse(output_fwnode,
+                                                &output_endpoint);
+
+       fwnode_handle_put(output_fwnode);
+
+       if (!output_fwnode || ret) {
+               dev_info(csi2dc->dev,
+                        "missing output node at %pOF, data pipe available only.\n",
+                        of_node);
+       } else {
+               if (output_endpoint.bus_type != V4L2_MBUS_PARALLEL &&
+                   output_endpoint.bus_type != V4L2_MBUS_BT656) {
+                       dev_err(csi2dc->dev,
+                               "output port must be parallel/bt656.\n");
+                       ret = -EINVAL;
+                       goto csi2dc_of_parse_err;
+               }
+
+               csi2dc->video_pipe = true;
+
+               dev_dbg(csi2dc->dev,
+                       "block %pOF [%d.%d]->[%d.%d] video pipeline\n",
+                       of_node, input_endpoint.base.port,
+                       input_endpoint.base.id, output_endpoint.base.port,
+                       output_endpoint.base.id);
+       }
+
+       /* prepare async notifier for subdevice completion */
+       return csi2dc_prepare_notifier(csi2dc, input_fwnode);
+
+csi2dc_of_parse_err:
+       fwnode_handle_put(input_fwnode);
+       return ret;
+}
+
+static void csi2dc_default_format(struct csi2dc_device *csi2dc)
+{
+       csi2dc->cur_fmt = &csi2dc_formats[0];
+
+       csi2dc->format.height = 480;
+       csi2dc->format.width = 640;
+       csi2dc->format.code = csi2dc_formats[0].mbus_code;
+       csi2dc->format.colorspace = V4L2_COLORSPACE_SRGB;
+       csi2dc->format.field = V4L2_FIELD_NONE;
+       csi2dc->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
+       csi2dc->format.quantization = V4L2_QUANTIZATION_DEFAULT;
+       csi2dc->format.xfer_func = V4L2_XFER_FUNC_DEFAULT;
+}
+
+static int csi2dc_probe(struct platform_device *pdev)
+{
+       struct device *dev = &pdev->dev;
+       struct csi2dc_device *csi2dc;
+       int ret = 0;
+       u32 ver;
+
+       csi2dc = devm_kzalloc(dev, sizeof(*csi2dc), GFP_KERNEL);
+       if (!csi2dc)
+               return -ENOMEM;
+
+       csi2dc->dev = dev;
+
+       csi2dc->base = devm_platform_ioremap_resource(pdev, 0);
+       if (IS_ERR(csi2dc->base)) {
+               dev_err(dev, "base address not set\n");
+               return PTR_ERR(csi2dc->base);
+       }
+
+       csi2dc->pclk = devm_clk_get(dev, "pclk");
+       if (IS_ERR(csi2dc->pclk)) {
+               ret = PTR_ERR(csi2dc->pclk);
+               dev_err(dev, "failed to get pclk: %d\n", ret);
+               return ret;
+       }
+
+       csi2dc->scck = devm_clk_get(dev, "scck");
+       if (IS_ERR(csi2dc->scck)) {
+               ret = PTR_ERR(csi2dc->scck);
+               dev_err(dev, "failed to get scck: %d\n", ret);
+               return ret;
+       }
+
+       v4l2_subdev_init(&csi2dc->csi2dc_sd, &csi2dc_subdev_ops);
+
+       csi2dc->csi2dc_sd.owner = THIS_MODULE;
+       csi2dc->csi2dc_sd.dev = dev;
+       snprintf(csi2dc->csi2dc_sd.name, sizeof(csi2dc->csi2dc_sd.name),
+                "csi2dc");
+
+       csi2dc->csi2dc_sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+       csi2dc->csi2dc_sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
+       csi2dc->csi2dc_sd.entity.ops = &csi2dc_entity_ops;
+
+       platform_set_drvdata(pdev, csi2dc);
+
+       ret = csi2dc_of_parse(csi2dc, dev->of_node);
+       if (ret)
+               goto csi2dc_probe_cleanup_entity;
+
+       csi2dc->pads[CSI2DC_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
+       if (csi2dc->video_pipe)
+               csi2dc->pads[CSI2DC_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
+
+       ret = media_entity_pads_init(&csi2dc->csi2dc_sd.entity,
+                                    csi2dc->video_pipe ? CSI2DC_PADS_NUM : 1,
+                                    csi2dc->pads);
+       if (ret < 0) {
+               dev_err(dev, "media entity init failed\n");
+               goto csi2dc_probe_cleanup_notifier;
+       }
+
+       csi2dc_default_format(csi2dc);
+
+       /* turn power on to validate capabilities */
+       ret = csi2dc_power(csi2dc, true);
+       if (ret < 0)
+               goto csi2dc_probe_cleanup_notifier;
+
+       pm_runtime_set_active(dev);
+       pm_runtime_enable(dev);
+       ver = csi2dc_readl(csi2dc, CSI2DC_VERSION);
+
+       /*
+        * we must register the subdev after PM runtime has been requested,
+        * otherwise we might bound immediately and request pm_runtime_resume
+        * before runtime_enable.
+        */
+       ret = v4l2_async_register_subdev(&csi2dc->csi2dc_sd);
+       if (ret) {
+               dev_err(csi2dc->dev, "failed to register the subdevice\n");
+               goto csi2dc_probe_cleanup_notifier;
+       }
+
+       dev_info(dev, "Microchip CSI2DC version %x\n", ver);
+
+       return 0;
+
+csi2dc_probe_cleanup_notifier:
+       v4l2_async_nf_cleanup(&csi2dc->notifier);
+csi2dc_probe_cleanup_entity:
+       media_entity_cleanup(&csi2dc->csi2dc_sd.entity);
+
+       return ret;
+}
+
+static int csi2dc_remove(struct platform_device *pdev)
+{
+       struct csi2dc_device *csi2dc = platform_get_drvdata(pdev);
+
+       pm_runtime_disable(&pdev->dev);
+
+       v4l2_async_unregister_subdev(&csi2dc->csi2dc_sd);
+       v4l2_async_nf_unregister(&csi2dc->notifier);
+       v4l2_async_nf_cleanup(&csi2dc->notifier);
+       media_entity_cleanup(&csi2dc->csi2dc_sd.entity);
+
+       return 0;
+}
+
+static int __maybe_unused csi2dc_runtime_suspend(struct device *dev)
+{
+       struct csi2dc_device *csi2dc = dev_get_drvdata(dev);
+
+       return csi2dc_power(csi2dc, false);
+}
+
+static int __maybe_unused csi2dc_runtime_resume(struct device *dev)
+{
+       struct csi2dc_device *csi2dc = dev_get_drvdata(dev);
+
+       return csi2dc_power(csi2dc, true);
+}
+
+static const struct dev_pm_ops csi2dc_dev_pm_ops = {
+       SET_RUNTIME_PM_OPS(csi2dc_runtime_suspend, csi2dc_runtime_resume, NULL)
+};
+
+static const struct of_device_id csi2dc_of_match[] = {
+       { .compatible = "microchip,sama7g5-csi2dc" },
+       { }
+};
+
+MODULE_DEVICE_TABLE(of, csi2dc_of_match);
+
+static struct platform_driver csi2dc_driver = {
+       .probe  = csi2dc_probe,
+       .remove = csi2dc_remove,
+       .driver = {
+               .name =                 "microchip-csi2dc",
+               .pm =                   &csi2dc_dev_pm_ops,
+               .of_match_table =       of_match_ptr(csi2dc_of_match),
+       },
+};
+
+module_platform_driver(csi2dc_driver);
+
+MODULE_AUTHOR("Eugen Hristev <eugen.hristev@microchip.com>");
+MODULE_DESCRIPTION("Microchip CSI2 Demux Controller driver");
+MODULE_LICENSE("GPL v2");