ARM: dts: imx6sll: Make ssi node name same as other platforms

In imx6sll.dtsi, the ssi node name is different with other
platforms (imx6qdl, imx6sl, imx6sx), but the
sound/soc/fsl/fsl-asoc-card.c machine driver needs to check
ssi node name for audmux configuration, then different ssi
node name causes issue on imx6sll platform.

So we change ssi node name to make all platforms have same
name.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
index b715aa7ed599f1c463cb2a6eea808809e15e3bc2..3d1a689f5dec9b5f7edf7c10ef42b337bdbee667 100644 (file)
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -261,7 +261,7 @@
                                        status = "disabled";
                                };
 
-                               ssi1: ssi-controller@2028000 {
+                               ssi1: ssi@2028000 {
                                        compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
                                        reg = <0x02028000 0x4000>;
                                        interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
@@ -274,7 +274,7 @@
                                        status = "disabled";
                                };
 
-                               ssi2: ssi-controller@202c000 {
+                               ssi2: ssi@202c000 {
                                        compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
                                        reg = <0x0202c000 0x4000>;
                                        interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
@@ -287,7 +287,7 @@
                                        status = "disabled";
                                };
 
-                               ssi3: ssi-controller@2030000 {
+                               ssi3: ssi@2030000 {
                                        compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
                                        reg = <0x02030000 0x4000>;
                                        interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;