drm/bridge: adv7511: Reset registers on hotplug

The bridge loses its hw state when the cable is unplugged. If we detect
this case in the hpd handler, reset its state.

Reported-by: Rob Clark <robdclark@gmail.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703165648.120401-1-seanpaul@chromium.org

diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index 73021b388e12d3bc1ca7cabfc0178af223f77686..dd3ff2f2cdce00cb761ffe5be5bd15b0c915c38f 100644 (file)
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -429,6 +429,18 @@ static void adv7511_hpd_work(struct work_struct *work)
        else
                status = connector_status_disconnected;
 
+       /*
+        * The bridge resets its registers on unplug. So when we get a plug
+        * event and we're already supposed to be powered, cycle the bridge to
+        * restore its state.
+        */
+       if (status == connector_status_connected &&
+           adv7511->connector.status == connector_status_disconnected &&
+           adv7511->powered) {
+               regcache_mark_dirty(adv7511->regmap);
+               adv7511_power_on(adv7511);
+       }
+
        if (adv7511->connector.status != status) {
                adv7511->connector.status = status;
                if (status == connector_status_disconnected)