arm64: dts: qcom: ipq8074: Remove unused gpio from QPIC pins

gpio16 will only be used for LCD support, as its NAND/LCDC data[8]
so its bit 9 of the parallel QPIC interface, and ONFI NAND is only 8
or 16-bit with only 8-bit one being supported in our case so that pin
is unused.

It should be dropped from the default NAND pinctrl configuration
as its unused and only needed for LCD.

Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20240313102713.1727458-1-frut3k7@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 7e4e6a5a02d506e32dd159b1114fda21d2aa86d4..bed405559866f4ab42172b31eb4ead5c05db12d6 100644 (file)
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -356,7 +356,7 @@
                                       "gpio5", "gpio6", "gpio7",
                                       "gpio8", "gpio10", "gpio11",
                                       "gpio12", "gpio13", "gpio14",
-                                      "gpio15", "gpio16", "gpio17";
+                                      "gpio15", "gpio17";
                                function = "qpic";
                                drive-strength = <8>;
                                bias-disable;