net: sfp: improve Nokia GPON sfp fixup
authorRussell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tue, 3 Oct 2023 13:34:29 +0000 (14:34 +0100)
committerJakub Kicinski <kuba@kernel.org>
Fri, 6 Oct 2023 01:05:06 +0000 (18:05 -0700)
Improve the Nokia GPON fixup - we need to ignore not only the hardware
LOS signal, but also the software implementation as well. Do this by
using the new state_ignore_mask to indicate that we should ignore not
only the hardware RX_LOS signal, and also clear the LOS bits in the
option field.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/E1qnfXh-008UDe-F9@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
drivers/net/phy/sfp.c

index d51b2036c06086582712f173f712849da1b26909..b8c0961daf53171733885531ba4fe7b5d831ad7c 100644 (file)
@@ -345,11 +345,26 @@ static void sfp_fixup_long_startup(struct sfp *sfp)
        sfp->module_t_start_up = T_START_UP_BAD_GPON;
 }
 
+static void sfp_fixup_ignore_los(struct sfp *sfp)
+{
+       /* This forces LOS to zero, so we ignore transitions */
+       sfp->state_ignore_mask |= SFP_F_LOS;
+       /* Make sure that LOS options are clear */
+       sfp->id.ext.options &= ~cpu_to_be16(SFP_OPTIONS_LOS_INVERTED |
+                                           SFP_OPTIONS_LOS_NORMAL);
+}
+
 static void sfp_fixup_ignore_tx_fault(struct sfp *sfp)
 {
        sfp->state_ignore_mask |= SFP_F_TX_FAULT;
 }
 
+static void sfp_fixup_nokia(struct sfp *sfp)
+{
+       sfp_fixup_long_startup(sfp);
+       sfp_fixup_ignore_los(sfp);
+}
+
 // For 10GBASE-T short-reach modules
 static void sfp_fixup_10gbaset_30m(struct sfp *sfp)
 {
@@ -446,7 +461,7 @@ static const struct sfp_quirk sfp_quirks[] = {
        // Alcatel Lucent G-010S-A can operate at 2500base-X, but report 3.2GBd
        // NRZ in their EEPROM
        SFP_QUIRK("ALCATELLUCENT", "3FE46541AA", sfp_quirk_2500basex,
-                 sfp_fixup_long_startup),
+                 sfp_fixup_nokia),
 
        // Fiberstore SFP-10G-T doesn't identify as copper, and uses the
        // Rollball protocol to talk to the PHY.