ARM: dts: qcom: apq8064-ifc6410: pull ext-3p3v regulator from soc node

The ext 3.3V regulator is not part of the SoC, so pull it from the SoC
node.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930185236.867655-4-dmitry.baryshkov@linaro.org

diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 50792f06855ee80c6e93d2ffbeaae75a756f1865..f718b37192e9ffd8a76c7f51b2545d0e2284ada2 100644 (file)
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -57,18 +57,16 @@
                };
        };
 
-       soc {
-               ext_3p3v: regulator-fixed@1 {
-                       compatible = "regulator-fixed";
-                       regulator-min-microvolt = <3300000>;
-                       regulator-max-microvolt = <3300000>;
-                       regulator-name = "ext_3p3v";
-                       regulator-type = "voltage";
-                       startup-delay-us = <0>;
-                       gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
-                       enable-active-high;
-                       regulator-boot-on;
-               };
+       ext_3p3v: regulator-ext-3p3v {
+               compatible = "regulator-fixed";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               regulator-name = "ext_3p3v";
+               regulator-type = "voltage";
+               startup-delay-us = <0>;
+               gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+               regulator-boot-on;
        };
 };