Several TI SoC clock bindings were marked as work-in-progress / unstable
between 2013-2016, for example in commit
f60b1ea5ea7a ("CLK: TI: add
support for gate clock"). It was enough of time to consider them stable
and expect usual ABI rules.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20240224091236.10146-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Binding for Texas Instruments ADPLL clock.
-Binding status: Unstable - ABI compatibility may be broken in the future
-
This binding uses the common clock binding[1]. It assumes a
register-mapped ADPLL with two to three selectable input clocks
and three to four children.
Binding for Texas Instruments APLL clock.
-Binding status: Unstable - ABI compatibility may be broken in the future
-
This binding uses the common clock binding[1]. It assumes a
register-mapped APLL with usually two selectable input clocks
(reference clock and bypass clock), with analog phase locked
Binding for Texas Instruments autoidle clock.
-Binding status: Unstable - ABI compatibility may be broken in the future
-
This binding uses the common clock binding[1]. It assumes a register mapped
clock which can be put to idle automatically by hardware based on the usage
and a configuration bit setting. Autoidle clock is never an individual
Binding for Texas Instruments clockdomain.
-Binding status: Unstable - ABI compatibility may be broken in the future
-
This binding uses the common clock binding[1] in consumer role.
Every clock on TI SoC belongs to one clockdomain, but software
only needs this information for specific clocks which require
Binding for TI composite clock.
-Binding status: Unstable - ABI compatibility may be broken in the future
-
This binding uses the common clock binding[1]. It assumes a
register-mapped composite clock with multiple different sub-types;
Binding for TI divider clock
-Binding status: Unstable - ABI compatibility may be broken in the future
-
This binding uses the common clock binding[1]. It assumes a
register-mapped adjustable clock rate divider that does not gate and has
only one input clock or parent. By default the value programmed into
Binding for Texas Instruments DPLL clock.
-Binding status: Unstable - ABI compatibility may be broken in the future
-
This binding uses the common clock binding[1]. It assumes a
register-mapped DPLL with usually two selectable input clocks
(reference clock and bypass clock), with digital phase locked
Binding for Texas Instruments FAPLL clock.
-Binding status: Unstable - ABI compatibility may be broken in the future
-
This binding uses the common clock binding[1]. It assumes a
register-mapped FAPLL with usually two selectable input clocks
(reference clock and bypass clock), and one or more child
Binding for TI fixed factor rate clock sources.
-Binding status: Unstable - ABI compatibility may be broken in the future
-
This binding uses the common clock binding[1], and also uses the autoidle
support from TI autoidle clock [2].
Binding for Texas Instruments gate clock.
-Binding status: Unstable - ABI compatibility may be broken in the future
-
This binding uses the common clock binding[1]. This clock is
quite much similar to the basic gate-clock [2], however,
it supports a number of additional features. If no register
Binding for Texas Instruments interface clock.
-Binding status: Unstable - ABI compatibility may be broken in the future
-
This binding uses the common clock binding[1]. This clock is
quite much similar to the basic gate-clock [2], however,
it supports a number of additional features, including
Binding for TI mux clock.
-Binding status: Unstable - ABI compatibility may be broken in the future
-
This binding uses the common clock binding[1]. It assumes a
register-mapped multiplexer with multiple input clock signals or
parents, one of which can be selected as output. This clock does not
projects / linux.git / commitdiff