Staging: comedi: fix yet another brace coding style issue in ni_labpc.c

This is a patch to the ni_labpc.c file that fixes up all the brace
warnings found by the checkpatch.pl tool

Signed-off-by: Maurice Dawson <mauricedawson2699@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c
index 5dc8606009aaf93c9e8cd13bb759bda22229092d..d6b5c05ee199809fffea9398d759e59f9f027f64 100644 (file)
--- a/drivers/staging/comedi/drivers/ni_labpc.c
+++ b/drivers/staging/comedi/drivers/ni_labpc.c
@@ -642,9 +642,8 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase,
                        devpriv->eeprom_data[i] = labpc_eeprom_read(dev, i);
 #ifdef LABPC_DEBUG
                printk(" eeprom:");
-               for (i = 0; i < EEPROM_SIZE; i++) {
+               for (i = 0; i < EEPROM_SIZE; i++)
                        printk(" %i:0x%x ", i, devpriv->eeprom_data[i]);
-               }
                printk("\n");
 #endif
        } else
@@ -676,9 +675,8 @@ static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it)
        case pci_bustype:
 #ifdef CONFIG_COMEDI_PCI
                retval = labpc_find_device(dev, it->options[0], it->options[1]);
-               if (retval < 0) {
+               if (retval < 0)
                        return retval;
-               }
                retval = mite_setup(devpriv->mite);
                if (retval < 0)
                        return retval;
@@ -1005,9 +1003,9 @@ static int labpc_ai_cmdtest(struct comedi_device *dev,
                err++;
        }
 
-       if (!cmd->chanlist_len) {
+       if (!cmd->chanlist_len)
                err++;
-       }
+
        if (cmd->scan_end_arg != cmd->chanlist_len) {
                cmd->scan_end_arg = cmd->chanlist_len;
                err++;
@@ -1102,9 +1100,9 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
        devpriv->write_byte(devpriv->command3_bits, dev->iobase + COMMAND3_REG);
 
        /*  initialize software conversion count */
-       if (cmd->stop_src == TRIG_COUNT) {
+       if (cmd->stop_src == TRIG_COUNT)
                devpriv->count = cmd->stop_arg * cmd->chanlist_len;
-       }
+
        /*  setup hardware conversion counter */
        if (cmd->stop_src == TRIG_EXT) {
                /*  load counter a1 with count of 3 (pc+ manual says this is minimum allowed) using mode 0 */
@@ -1476,9 +1474,9 @@ static void labpc_drain_dma(struct comedi_device *dev)
        }
 
        /* write data to comedi buffer */
-       for (i = 0; i < num_points; i++) {
+       for (i = 0; i < num_points; i++)
                cfc_write_to_buffer(s, devpriv->dma_buffer[i]);
-       }
+
        if (async->cmd.stop_src == TRIG_COUNT)
                devpriv->count -= num_points;
 
@@ -1861,9 +1859,9 @@ static unsigned int labpc_serial_in(struct comedi_device *dev)
                udelay(1);
                devpriv->status2_bits =
                    devpriv->read_byte(dev->iobase + STATUS2_REG);
-               if (devpriv->status2_bits & EEPROM_OUT_BIT) {
+               if (devpriv->status2_bits & EEPROM_OUT_BIT)
                        value |= 1 << (value_width - i);
-               }
+
        }
 
        return value;