drm: adv7511: Add support for i2c_new_secondary_device

The ADV7511 has four 256-byte maps that can be accessed via the main I2C
ports. Each map has it own I2C address and acts as a standard slave
device on the I2C bus.

Allow a device tree node to override the default addresses so that
address conflicts with other devices on the same bus may be resolved at
the board description level.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1518544137-2742-6-git-send-email-kbingham@kernel.org

diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h b/drivers/gpu/drm/bridge/adv7511/adv7511.h
index d034b2cb5eee30ee0b1b2fc44d1b010c01263787..73d8ccb977427a5b995081db91de5126165565db 100644 (file)
--- a/drivers/gpu/drm/bridge/adv7511/adv7511.h
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
@@ -93,6 +93,11 @@
 #define ADV7511_REG_CHIP_ID_HIGH               0xf5
 #define ADV7511_REG_CHIP_ID_LOW                        0xf6
 
+/* Hardware defined default addresses for I2C register maps */
+#define ADV7511_CEC_I2C_ADDR_DEFAULT           0x3c
+#define ADV7511_EDID_I2C_ADDR_DEFAULT          0x3f
+#define ADV7511_PACKET_I2C_ADDR_DEFAULT                0x38
+
 #define ADV7511_CSC_ENABLE                     BIT(7)
 #define ADV7511_CSC_UPDATE_MODE                        BIT(5)
 
@@ -321,6 +326,7 @@ enum adv7511_type {
 struct adv7511 {
        struct i2c_client *i2c_main;
        struct i2c_client *i2c_edid;
+       struct i2c_client *i2c_packet;
        struct i2c_client *i2c_cec;
 
        struct regmap *regmap;

diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index efa29db5fc2b7eeff375d2f6cdafce9340fd6301..5f749cdd2ca20579070057c526333b34de682e67 100644 (file)
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -586,7 +586,7 @@ static int adv7511_get_modes(struct adv7511 *adv7511,
        /* Reading the EDID only works if the device is powered */
        if (!adv7511->powered) {
                unsigned int edid_i2c_addr =
-                                       (adv7511->i2c_main->addr << 1) + 4;
+                                       (adv7511->i2c_edid->addr << 1);
 
                __adv7511_power_on(adv7511);
 
@@ -969,10 +969,10 @@ static int adv7511_init_cec_regmap(struct adv7511 *adv)
 {
        int ret;
 
-       adv->i2c_cec = i2c_new_dummy(adv->i2c_main->adapter,
-                                    adv->i2c_main->addr - 1);
+       adv->i2c_cec = i2c_new_secondary_device(adv->i2c_main, "cec",
+                                               ADV7511_CEC_I2C_ADDR_DEFAULT);
        if (!adv->i2c_cec)
-               return -ENOMEM;
+               return -EINVAL;
        i2c_set_clientdata(adv->i2c_cec, adv);
 
        adv->regmap_cec = devm_regmap_init_i2c(adv->i2c_cec,
@@ -1082,8 +1082,6 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
        struct adv7511_link_config link_config;
        struct adv7511 *adv7511;
        struct device *dev = &i2c->dev;
-       unsigned int main_i2c_addr = i2c->addr << 1;
-       unsigned int edid_i2c_addr = main_i2c_addr + 4;
        unsigned int val;
        int ret;
 
@@ -1153,23 +1151,34 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
        if (ret)
                goto uninit_regulators;
 
-       regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR, edid_i2c_addr);
-       regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR,
-                    main_i2c_addr - 0xa);
-       regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR,
-                    main_i2c_addr - 2);
-
        adv7511_packet_disable(adv7511, 0xffff);
 
-       adv7511->i2c_edid = i2c_new_dummy(i2c->adapter, edid_i2c_addr >> 1);
+       adv7511->i2c_edid = i2c_new_secondary_device(i2c, "edid",
+                                       ADV7511_EDID_I2C_ADDR_DEFAULT);
        if (!adv7511->i2c_edid) {
-               ret = -ENOMEM;
+               ret = -EINVAL;
                goto uninit_regulators;
        }
 
+       regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR,
+                    adv7511->i2c_edid->addr << 1);
+
+       adv7511->i2c_packet = i2c_new_secondary_device(i2c, "packet",
+                                       ADV7511_PACKET_I2C_ADDR_DEFAULT);
+       if (!adv7511->i2c_packet) {
+               ret = -EINVAL;
+               goto err_i2c_unregister_edid;
+       }
+
+       regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR,
+                    adv7511->i2c_packet->addr << 1);
+
        ret = adv7511_init_cec_regmap(adv7511);
        if (ret)
-               goto err_i2c_unregister_edid;
+               goto err_i2c_unregister_packet;
+
+       regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR,
+                    adv7511->i2c_cec->addr << 1);
 
        INIT_WORK(&adv7511->hpd_work, adv7511_hpd_work);
 
@@ -1207,6 +1216,8 @@ err_unregister_cec:
        i2c_unregister_device(adv7511->i2c_cec);
        if (adv7511->cec_clk)
                clk_disable_unprepare(adv7511->cec_clk);
+err_i2c_unregister_packet:
+       i2c_unregister_device(adv7511->i2c_packet);
 err_i2c_unregister_edid:
        i2c_unregister_device(adv7511->i2c_edid);
 uninit_regulators:
@@ -1233,6 +1244,7 @@ static int adv7511_remove(struct i2c_client *i2c)
 
        cec_unregister_adapter(adv7511->cec_adap);
 
+       i2c_unregister_device(adv7511->i2c_packet);
        i2c_unregister_device(adv7511->i2c_edid);
 
        return 0;