ARM: dts: qcom: msm8926-motorola-peregrine: Add initial device tree

This dts adds support for Motorola Moto G 4G released in 2013.

Add a device tree with initial support for:

- GPIO keys
- Hall sensor
- SDHCI
- Vibrator

Signed-off-by: André Apitzsch <git@apitzsch.eu>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231214-peregrine-v2-2-a35102268442@apitzsch.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile
index 0cb272f4fa45ce8643ccefef19eb2e16037391a6..9cc1e14e6cd09c509e796188c5fc289c3ed06b11 100644 (file)
--- a/arch/arm/boot/dts/qcom/Makefile
+++ b/arch/arm/boot/dts/qcom/Makefile
@@ -35,6 +35,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
        qcom-msm8926-htc-memul.dtb \
        qcom-msm8926-microsoft-superman-lte.dtb \
        qcom-msm8926-microsoft-tesla.dtb \
+       qcom-msm8926-motorola-peregrine.dtb \
        qcom-msm8960-cdp.dtb \
        qcom-msm8960-samsung-expressatt.dtb \
        qcom-msm8974-lge-nexus5-hammerhead.dtb \

diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts
new file mode 100644 (file)
index 0000000..0cbe2d2
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts
@@ -0,0 +1,291 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+
+/delete-node/ &smem_region;
+
+/ {
+       model = "Motorola Moto G 4G (2013)";
+       compatible = "motorola,peregrine", "qcom,msm8926", "qcom,msm8226";
+       chassis-type = "handset";
+
+       aliases {
+               mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+               mmc1 = &sdhc_2; /* SDC2 SD card slot */
+       };
+
+       chosen {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+
+               framebuffer0: framebuffer@3200000 {
+                       compatible = "simple-framebuffer";
+                       reg = <0x03200000 0x800000>;
+                       width = <720>;
+                       height = <1280>;
+                       stride = <(720 * 3)>;
+                       format = "r8g8b8";
+               };
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+
+               event-hall-sensor {
+                       label = "Hall Effect Sensor";
+                       gpios = <&tlmm 51 GPIO_ACTIVE_LOW>;
+                       linux,input-type = <EV_SW>;
+                       linux,code = <SW_LID>;
+                       linux,can-disable;
+               };
+
+               key-volume-up {
+                       label = "Volume Up";
+                       gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_VOLUMEUP>;
+                       debounce-interval = <15>;
+               };
+       };
+
+       reserved-memory {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+
+               framebuffer@3200000 {
+                       reg = <0x03200000 0x800000>;
+                       no-map;
+               };
+
+               smem_region: smem@fa00000 {
+                       reg = <0x0fa00000 0x100000>;
+                       no-map;
+               };
+       };
+};
+
+&blsp1_i2c3 {
+       status = "okay";
+
+       sensor@48 {
+               compatible = "ti,tmp108";
+               reg = <0x48>;
+       };
+};
+
+&blsp1_uart3 {
+       status = "okay";
+};
+
+&pm8226_resin {
+       linux,code = <KEY_VOLUMEDOWN>;
+       status = "okay";
+};
+
+&pm8226_vib {
+       status = "okay";
+};
+
+&rpm_requests {
+       regulators {
+               compatible = "qcom,rpm-pm8226-regulators";
+
+               pm8226_s3: s3 {
+                       regulator-min-microvolt = <1200000>;
+                       regulator-max-microvolt = <1300000>;
+               };
+
+               pm8226_s4: s4 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <2200000>;
+               };
+
+               pm8226_s5: s5 {
+                       regulator-min-microvolt = <1150000>;
+                       regulator-max-microvolt = <1150000>;
+               };
+
+               pm8226_l1: l1 {
+                       regulator-min-microvolt = <1225000>;
+                       regulator-max-microvolt = <1225000>;
+               };
+
+               pm8226_l2: l2 {
+                       regulator-min-microvolt = <1200000>;
+                       regulator-max-microvolt = <1200000>;
+               };
+
+               pm8226_l3: l3 {
+                       regulator-min-microvolt = <750000>;
+                       regulator-max-microvolt = <1337500>;
+               };
+
+               pm8226_l4: l4 {
+                       regulator-min-microvolt = <1200000>;
+                       regulator-max-microvolt = <1200000>;
+               };
+
+               pm8226_l5: l5 {
+                       regulator-min-microvolt = <1200000>;
+                       regulator-max-microvolt = <1200000>;
+               };
+
+               pm8226_l6: l6 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+                       regulator-allow-set-load;
+               };
+
+               pm8226_l7: l7 {
+                       regulator-min-microvolt = <1850000>;
+                       regulator-max-microvolt = <1850000>;
+               };
+
+               pm8226_l8: l8 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+               };
+
+               pm8226_l9: l9 {
+                       regulator-min-microvolt = <2050000>;
+                       regulator-max-microvolt = <2050000>;
+               };
+
+               pm8226_l10: l10 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+               };
+
+               pm8226_l12: l12 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+               };
+
+               pm8226_l14: l14 {
+                       regulator-min-microvolt = <2750000>;
+                       regulator-max-microvolt = <2750000>;
+               };
+
+               pm8226_l15: l15 {
+                       regulator-min-microvolt = <2800000>;
+                       regulator-max-microvolt = <2800000>;
+               };
+
+               pm8226_l16: l16 {
+                       regulator-min-microvolt = <3000000>;
+                       regulator-max-microvolt = <3350000>;
+               };
+
+               pm8226_l17: l17 {
+                       regulator-min-microvolt = <2950000>;
+                       regulator-max-microvolt = <2950000>;
+               };
+
+               pm8226_l18: l18 {
+                       regulator-min-microvolt = <2950000>;
+                       regulator-max-microvolt = <2950000>;
+               };
+
+               pm8226_l19: l19 {
+                       regulator-min-microvolt = <2850000>;
+                       regulator-max-microvolt = <2850000>;
+               };
+
+               pm8226_l20: l20 {
+                       regulator-min-microvolt = <3075000>;
+                       regulator-max-microvolt = <3075000>;
+               };
+
+               pm8226_l21: l21 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <2950000>;
+                       regulator-allow-set-load;
+               };
+
+               pm8226_l22: l22 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <2950000>;
+               };
+
+               pm8226_l23: l23 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <2950000>;
+               };
+
+               pm8226_l24: l24 {
+                       regulator-min-microvolt = <1300000>;
+                       regulator-max-microvolt = <1350000>;
+               };
+
+               pm8226_l25: l25 {
+                       regulator-min-microvolt = <1775000>;
+                       regulator-max-microvolt = <2125000>;
+               };
+
+               pm8226_l26: l26 {
+                       regulator-min-microvolt = <1225000>;
+                       regulator-max-microvolt = <1225000>;
+               };
+
+               pm8226_l27: l27 {
+                       regulator-min-microvolt = <2050000>;
+                       regulator-max-microvolt = <2050000>;
+               };
+
+               pm8226_l28: l28 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <3400000>;
+                       regulator-boot-on;
+               };
+
+               pm8226_lvs1: lvs1 {
+                       /* Pull-up for I2C lines */
+                       regulator-always-on;
+               };
+       };
+};
+
+&sdhc_1 {
+       vmmc-supply = <&pm8226_l17>;
+       vqmmc-supply = <&pm8226_l6>;
+
+       bus-width = <8>;
+       non-removable;
+
+       status = "okay";
+};
+
+&sdhc_2 {
+       vmmc-supply = <&pm8226_l18>;
+       vqmmc-supply = <&pm8226_l21>;
+
+       bus-width = <4>;
+       cd-gpios = <&tlmm 115 GPIO_ACTIVE_HIGH>;
+
+       status = "okay";
+};
+
+&smbb {
+       qcom,fast-charge-safe-current = <2000000>;
+       qcom,fast-charge-current-limit = <1900000>;
+       qcom,fast-charge-safe-voltage = <4400000>;
+       qcom,minimum-input-voltage = <4300000>;
+
+       status = "okay";
+};
+
+&usb {
+       extcon = <&smbb>;
+       dr_mode = "peripheral";
+       status = "okay";
+};
+
+&usb_hs_phy {
+       extcon = <&smbb>;
+       v1p8-supply = <&pm8226_l10>;
+       v3p3-supply = <&pm8226_l20>;
+};