ARM: dts: aspeed: Add YADRO Nicole BMC
authorAlexander Filippov <a.filippov@yadro.com>
Wed, 29 Apr 2020 11:37:11 +0000 (14:37 +0300)
committerJoel Stanley <joel@jms.id.au>
Tue, 5 May 2020 07:07:17 +0000 (16:37 +0930)
Nicole is an OpenPower machine with an Aspeed 2500 BMC SoC manufactured
by YADRO.

Signed-off-by: Alexander Filippov <a.filippov@yadro.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Signed-off-by: Joel Stanley <joel@jms.id.au>
arch/arm/boot/dts/Makefile
arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts [new file with mode: 0644]

index e8dd9920139733b7d7cc1e4d83ea63db1dfa9eab..6f9fe0f959f2cdd0f5b689f8dca9ae4a395fc8e5 100644 (file)
@@ -1347,6 +1347,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
        aspeed-bmc-microsoft-olympus.dtb \
        aspeed-bmc-opp-lanyang.dtb \
        aspeed-bmc-opp-mihawk.dtb \
+       aspeed-bmc-opp-nicole.dtb \
        aspeed-bmc-opp-palmetto.dtb \
        aspeed-bmc-opp-romulus.dtb \
        aspeed-bmc-opp-swift.dtb \
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts
new file mode 100644 (file)
index 0000000..91dced7
--- /dev/null
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2019 YADRO
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+       model = "Nicole BMC";
+       compatible = "yadro,nicole-bmc", "aspeed,ast2500";
+
+       chosen {
+               stdout-path = &uart5;
+               bootargs = "console=ttyS4,115200 earlyprintk";
+       };
+
+       memory@80000000 {
+               reg = <0x80000000 0x20000000>;
+       };
+
+       reserved-memory {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+
+               vga_memory: framebuffer@9f000000 {
+                       no-map;
+                       reg = <0x9f000000 0x01000000>; /* 16M */
+               };
+
+               flash_memory: region@98000000 {
+                       no-map;
+                       reg = <0x98000000 0x04000000>; /* 64M */
+               };
+
+               coldfire_memory: codefire_memory@9ef00000 {
+                       reg = <0x9ef00000 0x00100000>;
+                       no-map;
+               };
+
+               gfx_memory: framebuffer {
+                       size = <0x01000000>;
+                       alignment = <0x01000000>;
+                       compatible = "shared-dma-pool";
+                       reusable;
+               };
+
+               video_engine_memory: jpegbuffer {
+                       size = <0x02000000>;    /* 32M */
+                       alignment = <0x01000000>;
+                       compatible = "shared-dma-pool";
+                       reusable;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power {
+                       label = "platform:green:power";
+                       gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>;
+               };
+
+               identify {
+                       label = "platform:blue:indicator";
+                       gpios = <&gpio ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>;
+               };
+
+               fault {
+                       label = "platform:red:fault";
+                       gpios = <&gpio ASPEED_GPIO(AA, 3) GPIO_ACTIVE_HIGH>;
+               };
+
+               attention {
+                       label = "platform:yellow:alarm";
+                       gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_HIGH>;
+               };
+       };
+
+       fsi: gpio-fsi {
+               compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+               #address-cells = <2>;
+               #size-cells = <0>;
+               no-gpio-delays;
+
+               memory-region = <&coldfire_memory>;
+               aspeed,sram = <&sram>;
+               aspeed,cvic = <&cvic>;
+
+               clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+               data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
+               mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+               enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+               trans-gpios = <&gpio ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+
+               checkstop {
+                       label = "checkstop";
+                       gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+                       linux,code = <ASPEED_GPIO(J, 2)>;
+               };
+       };
+
+       iio-hwmon-battery {
+               compatible = "iio-hwmon";
+               io-channels = <&adc 12>;
+       };
+};
+
+&fmc {
+       status = "okay";
+       flash@0 {
+               status = "okay";
+               m25p,fast-read;
+               label = "bmc";
+               spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+       };
+};
+
+&spi1 {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_spi1_default>;
+
+       flash@0 {
+               status = "okay";
+               m25p,fast-read;
+               label = "pnor";
+               spi-max-frequency = <100000000>;
+       };
+};
+
+&lpc_ctrl {
+       status = "okay";
+       memory-region = <&flash_memory>;
+       flash = <&spi1>;
+};
+
+&uart1 {
+       /* Rear RS-232 connector */
+       status = "okay";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_txd1_default
+                       &pinctrl_rxd1_default
+                       &pinctrl_nrts1_default
+                       &pinctrl_ndtr1_default
+                       &pinctrl_ndsr1_default
+                       &pinctrl_ncts1_default
+                       &pinctrl_ndcd1_default
+                       &pinctrl_nri1_default>;
+};
+
+&uart5 {
+       status = "okay";
+};
+
+&mac0 {
+       status = "okay";
+
+       use-ncsi;
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_rmii1_default>;
+       clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+                <&syscon ASPEED_CLK_MAC1RCLK>;
+       clock-names = "MACCLK", "RCLK";
+};
+
+&i2c0 {
+       status = "okay";
+
+       eeprom@50 {
+               compatible = "atmel,24c256";
+               reg = <0x50>;
+               pagesize = <64>;
+       };
+};
+
+&i2c2 {
+       status = "okay";
+       /* CPU0 characterization connector */
+};
+
+&i2c3 {
+       status = "okay";
+       /* CLK GEN SI5338 */
+};
+
+&i2c4 {
+       status = "okay";
+       /* Voltage regulators for CPU0 */
+};
+
+&i2c5 {
+       status = "okay";
+       /* Voltage regulators for CPU1 */
+};
+
+&i2c6 {
+       status = "okay";
+
+       rtc@32 {
+               compatible = "epson,rx8900";
+               reg = <0x32>;
+       };
+};
+
+&i2c7 {
+       status = "okay";
+       /* CPLD */
+};
+
+&gpio {
+       gpio-line-names =
+       /*A0-A7*/       "","cfam-reset","","","","","fsi-mux","",
+       /*B0-B7*/       "","","","","","","","",
+       /*C0-C7*/       "","","","","","","","",
+       /*D0-D7*/       "fsi-enable","bmc_power_up","sys_pwrok_buf",
+                       "func_mode0","func_mode1","func_mode2","","",
+       /*E0-E7*/       "","ncsi_cfg","","","","","","",
+       /*F0-F7*/       "","","","","","","","",
+       /*G0-G7*/       "","","","","","","","",
+       /*H0-H7*/       "","","","","","","","",
+       /*I0-I7*/       "","","","","","","","",
+       /*J0-J7*/       "","","checkstop","","","","","",
+       /*K0-K7*/       "","","","","","","","",
+       /*L0-L7*/       "","","","","","","","",
+       /*M0-M7*/       "","","","","","","","",
+       /*N0-N7*/       "","","","","","","","",
+       /*O0-O7*/       "","","power-button","","","","","",
+       /*P0-P7*/       "","fsi-trans","pm_rtc_adc_en","","","","","",
+       /*Q0-Q7*/       "","","","","","","","id-button",
+       /*R0-R7*/       "","software_pwrgood","","","","","","",
+       /*S0-S7*/       "","","","","","","","seq_cont",
+       /*T0-T7*/       "","","","","","","","",
+       /*U0-U7*/       "","","","","","","","",
+       /*V0-V7*/       "","","","","","","","",
+       /*W0-W7*/       "","","","","","","","",
+       /*X0-X7*/       "","","","","","","","",
+       /*Y0-Y7*/       "","","","","","","","",
+       /*Z0-Z7*/       "","","","","","","","",
+       /*AA0-AA7*/     "fsi-clock","led-attention","fsi-data","led-fault",
+                       "led-power","","","led-identify",
+       /*AB0-AB7*/     "","","","","","","","",
+       /*AC0-AC7*/     "","","","","","","","";
+
+       func_mode0 {
+               gpio-hog;
+               gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
+               output-low;
+       };
+       func_mode1 {
+               gpio-hog;
+               gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+               output-low;
+       };
+       func_mode2 {
+               gpio-hog;
+               gpios = <ASPEED_GPIO(D, 5) GPIO_ACTIVE_HIGH>;
+               output-low;
+       };
+       seq_cont {
+               gpio-hog;
+               gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+               output-low;
+       };
+       ncsi_cfg {
+               gpio-hog;
+               input;
+               gpios = <ASPEED_GPIO(E, 1) GPIO_ACTIVE_HIGH>;
+       };
+};
+
+&vuart {
+       status = "okay";
+};
+
+&gfx {
+       status = "okay";
+       memory-region = <&gfx_memory>;
+};
+
+&pinctrl {
+       aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&ibt {
+       status = "okay";
+};
+
+&vhub {
+       status = "okay";
+};
+
+&adc {
+       status = "okay";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_adc0_default
+                       &pinctrl_adc1_default
+                       &pinctrl_adc2_default
+                       &pinctrl_adc3_default
+                       &pinctrl_adc4_default
+                       &pinctrl_adc5_default
+                       &pinctrl_adc6_default
+                       &pinctrl_adc7_default
+                       &pinctrl_adc8_default
+                       &pinctrl_adc9_default
+                       &pinctrl_adc10_default
+                       &pinctrl_adc11_default
+                       &pinctrl_adc12_default
+                       &pinctrl_adc13_default
+                       &pinctrl_adc14_default
+                       &pinctrl_adc15_default>;
+};
+
+&video {
+       status = "okay";
+       memory-region = <&video_engine_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"