ARM: dts: dra76-evm: remove ov5640

DRA76 EVM boards are not shipped with OV5640 sensor module, it is a
separate purchase. OV5640 module is also just one of the possible
sensors or capture boards you can connect.

However, for some reason, OV5640 has been added to the board dts file,
making it cumbersome to use other sensors.

Remove the OV5640 from the dts file so that it is easy to use other
sensors via DT overlays.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index 9bd01ae40b1d1fbb488b728af0ff5619013c55d5..4508f7ffde0dc6423a806446f4bf9732b7813ba6 100644 (file)
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -158,12 +158,6 @@
                regulator-max-microvolt = <1800000>;
        };
 
-       clk_ov5640_fixed: clock {
-               compatible = "fixed-clock";
-               #clock-cells = <0>;
-               clock-frequency = <24000000>;
-       };
-
        hdmi0: connector {
                compatible = "hdmi-connector";
                label = "hdmi";
@@ -406,27 +400,6 @@
        };
 };
 
-&i2c5 {
-       status = "okay";
-       clock-frequency = <400000>;
-
-       ov5640@3c {
-               compatible = "ovti,ov5640";
-               reg = <0x3c>;
-
-               clocks = <&clk_ov5640_fixed>;
-               clock-names = "xclk";
-
-               port {
-                       csi2_cam0: endpoint {
-                               remote-endpoint = <&csi2_phy0>;
-                               clock-lanes = <0>;
-                               data-lanes = <1 2>;
-                       };
-               };
-       };
-};
-
 &cpu0 {
        vdd-supply = <&buck10_reg>;
 };
@@ -573,14 +546,6 @@
        };
 };
 
-&csi2_0 {
-       csi2_phy0: endpoint {
-               remote-endpoint = <&csi2_cam0>;
-               clock-lanes = <0>;
-               data-lanes = <1 2>;
-       };
-};
-
 &ipu2 {
        status = "okay";
        memory-region = <&ipu2_cma_pool>;