arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs
authorMelody Olvera <quic_molvera@quicinc.com>
Thu, 12 Jan 2023 21:07:21 +0000 (13:07 -0800)
committerBjorn Andersson <andersson@kernel.org>
Tue, 31 Jan 2023 16:01:36 +0000 (10:01 -0600)
Add the base DTSI files for QDU1000 and QRU1000 SoCs, including base
descriptions of CPUs, GCC, RPMHCC, QUP, TLMM, and interrupt-controller
to boot to shell with console on these SoCs.

Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230112210722.6234-2-quic_molvera@quicinc.com
arch/arm64/boot/dts/qcom/qdu1000.dtsi [new file with mode: 0644]
arch/arm64/boot/dts/qcom/qru1000.dtsi [new file with mode: 0644]

diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
new file mode 100644 (file)
index 0000000..f234159
--- /dev/null
@@ -0,0 +1,1333 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,qdu1000-gcc.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/interconnect/qcom,qdu1000-rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+       interrupt-parent = <&intc>;
+
+       #address-cells = <2>;
+       #size-cells = <2>;
+
+       chosen: chosen { };
+
+       cpus {
+               #address-cells = <2>;
+               #size-cells = <0>;
+
+               CPU0: cpu@0 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a55";
+                       reg = <0x0 0x0>;
+                       enable-method = "psci";
+                       power-domains = <&CPU_PD0>;
+                       power-domain-names = "psci";
+                       qcom,freq-domains = <&cpufreq_hw 0>;
+                       next-level-cache = <&L2_0>;
+                       L2_0: l2-cache {
+                               compatible = "cache";
+                               next-level-cache = <&L3_0>;
+                               L3_0: l3-cache {
+                                       compatible = "cache";
+                               };
+                       };
+               };
+
+               CPU1: cpu@100 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a55";
+                       reg = <0x0 0x100>;
+                       enable-method = "psci";
+                       power-domains = <&CPU_PD1>;
+                       power-domain-names = "psci";
+                       qcom,freq-domains = <&cpufreq_hw 0>;
+                       next-level-cache = <&L2_100>;
+                       L2_100: l2-cache {
+                               compatible = "cache";
+                               next-level-cache = <&L3_0>;
+                       };
+               };
+
+               CPU2: cpu@200 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a55";
+                       reg = <0x0 0x200>;
+                       enable-method = "psci";
+                       power-domains = <&CPU_PD2>;
+                       power-domain-names = "psci";
+                       qcom,freq-domains = <&cpufreq_hw 0>;
+                       next-level-cache = <&L2_200>;
+                       L2_200: l2-cache {
+                               compatible = "cache";
+                               next-level-cache = <&L3_0>;
+                       };
+               };
+
+               CPU3: cpu@300 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a55";
+                       reg = <0x0 0x300>;
+                       enable-method = "psci";
+                       power-domains = <&CPU_PD3>;
+                       power-domain-names = "psci";
+                       qcom,freq-domains = <&cpufreq_hw 0>;
+                       next-level-cache = <&L2_300>;
+                       L2_300: l2-cache {
+                               compatible = "cache";
+                               next-level-cache = <&L3_0>;
+                       };
+               };
+
+               cpu-map {
+                       cluster0 {
+                               core0 {
+                                       cpu = <&CPU0>;
+                               };
+
+                               core1 {
+                                       cpu = <&CPU1>;
+                               };
+
+                               core2 {
+                                       cpu = <&CPU2>;
+                               };
+
+                               core3 {
+                                       cpu = <&CPU3>;
+                               };
+                       };
+               };
+       };
+
+       idle-states {
+               entry-method = "psci";
+
+               CPU_OFF: cpu-sleep-0 {
+                       compatible = "arm,idle-state";
+                       entry-latency-us = <274>;
+                       exit-latency-us = <480>;
+                       min-residency-us = <3934>;
+                       arm,psci-suspend-param = <0x40000004>;
+                       local-timer-stop;
+               };
+       };
+
+       domain-idle-states {
+               CLUSTER_SLEEP_0: cluster-sleep-0 {
+                       compatible = "domain-idle-state";
+                       entry-latency-us = <584>;
+                       exit-latency-us = <2332>;
+                       min-residency-us = <6118>;
+                       arm,psci-suspend-param = <0x41000044>;
+               };
+
+               CLUSTER_SLEEP_1: cluster-sleep-1 {
+                       compatible = "domain-idle-state";
+                       entry-latency-us = <2893>;
+                       exit-latency-us = <4023>;
+                       min-residency-us = <9987>;
+                       arm,psci-suspend-param = <0x41003344>;
+               };
+       };
+
+       firmware {
+               scm {
+                       compatible = "qcom,scm-qdu1000", "qcom,scm";
+               };
+       };
+
+       mc_virt: interconnect-0 {
+               compatible = "qcom,qdu1000-mc-virt";
+               qcom,bcm-voters = <&apps_bcm_voter>;
+               #interconnect-cells = <2>;
+       };
+
+       clk_virt: interconnect-1 {
+               compatible = "qcom,qdu1000-clk-virt";
+               qcom,bcm-voters = <&apps_bcm_voter>;
+               #interconnect-cells = <2>;
+       };
+
+       memory@80000000 {
+               device_type = "memory";
+               /* We expect the bootloader to fill in the size */
+               reg = <0x0 0x80000000 0x0 0x0>;
+       };
+
+       pmu {
+               compatible = "arm,armv8-pmuv3";
+               interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+       };
+
+       psci {
+               compatible = "arm,psci-1.0";
+               method = "smc";
+
+               CPU_PD0: power-domain-cpu0 {
+                       #power-domain-cells = <0>;
+                       power-domains = <&CLUSTER_PD>;
+                       domain-idle-states = <&CPU_OFF>;
+               };
+
+               CPU_PD1: power-domain-cpu1 {
+                       #power-domain-cells = <0>;
+                       power-domains = <&CLUSTER_PD>;
+                       domain-idle-states = <&CPU_OFF>;
+               };
+
+               CPU_PD2: power-domain-cpu2 {
+                       #power-domain-cells = <0>;
+                       power-domains = <&CLUSTER_PD>;
+                       domain-idle-states = <&CPU_OFF>;
+               };
+
+               CPU_PD3: power-domain-cpu3 {
+                       #power-domain-cells = <0>;
+                       power-domains = <&CLUSTER_PD>;
+                       domain-idle-states = <&CPU_OFF>;
+               };
+
+               CLUSTER_PD: power-domain-cluster {
+                       #power-domain-cells = <0>;
+                       domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1>;
+               };
+       };
+
+       reserved_memory: reserved-memory {
+               #address-cells = <2>;
+               #size-cells = <2>;
+               ranges;
+
+               hyp_mem: hyp@80000000 {
+                       reg = <0x0 0x80000000 0x0 0x600000>;
+                       no-map;
+               };
+
+               xbl_dt_log_mem: xbl-dt-log@80600000 {
+                       reg = <0x0 0x80600000 0x0 0x40000>;
+                       no-map;
+               };
+
+               xbl_ramdump_mem: xbl-ramdump@80640000 {
+                       reg = <0x0 0x80640000 0x0 0x1c0000>;
+                       no-map;
+               };
+
+               aop_image_mem: aop-image@80800000 {
+                       reg = <0x0 0x80800000 0x0 0x60000>;
+                       no-map;
+               };
+
+               aop_cmd_db_mem: aop-cmd-db@80860000 {
+                       compatible = "qcom,cmd-db";
+                       reg = <0x0 0x80860000 0x0 0x20000>;
+                       no-map;
+               };
+
+               aop_config_mem: aop-config@80880000 {
+                       reg = <0x0 0x80880000 0x0 0x20000>;
+                       no-map;
+               };
+
+               tme_crash_dump_mem: tme-crash-dump@808a0000 {
+                       reg = <0x0 0x808a0000 0x0 0x40000>;
+                       no-map;
+               };
+
+               tme_log_mem: tme-log@808e0000 {
+                       reg = <0x0 0x808e0000 0x0 0x4000>;
+                       no-map;
+               };
+
+               uefi_log_mem: uefi-log@808e4000 {
+                       reg = <0x0 0x808e4000 0x0 0x10000>;
+                       no-map;
+               };
+
+               smem_mem: smem@80900000 {
+                       compatible = "qcom,smem";
+                       reg = <0x0 0x80900000 0x0 0x200000>;
+                       no-map;
+                       hwlocks = <&tcsr_mutex 3>;
+               };
+
+               cpucp_fw_mem: cpucp-fw@80b00000 {
+                       reg = <0x0 0x80b00000 0x0 0x100000>;
+                       no-map;
+               };
+
+               xbl_sc_mem: memory@80c00000 {
+                       reg = <0x0 0x80c00000 0x0 0x40000>;
+                       no-map;
+               };
+
+               tz_stat_mem: tz-stat@81d00000 {
+                       reg = <0x0 0x81d00000 0x0 0x100000>;
+                       no-map;
+               };
+
+               tags_mem: tags@81e00000 {
+                       reg = <0x0 0x81e00000 0x0 0x500000>;
+                       no-map;
+               };
+
+               qtee_mem: qtee@82300000 {
+                       reg = <0x0 0x82300000 0x0 0x500000>;
+                       no-map;
+               };
+
+               ta_mem: ta@82800000 {
+                       reg = <0x0 0x82800000 0x0 0xa00000>;
+                       no-map;
+               };
+
+               fs1_mem: fs1@83200000 {
+                       reg = <0x0 0x83200000 0x0 0x400000>;
+                       no-map;
+               };
+
+               fs2_mem: fs2@83600000 {
+                       reg = <0x0 0x83600000 0x0 0x400000>;
+                       no-map;
+               };
+
+               fs3_mem: fs3@83a00000 {
+                       reg = <0x0 0x83a00000 0x0 0x400000>;
+                       no-map;
+               };
+
+               /* Linux kernel image is loaded at 0x83e00000 */
+
+               ipa_fw_mem: ipa-fw@8be00000 {
+                       reg = <0x0 0x8be00000 0x0 0x10000>;
+                       no-map;
+               };
+
+               ipa_gsi_mem: ipa-gsi@8be10000 {
+                       reg = <0x0 0x8be10000 0x0 0x14000>;
+                       no-map;
+               };
+
+               mpss_mem: mpss@8c000000 {
+                       reg = <0x0 0x8c000000 0x0 0x12c00000>;
+                       no-map;
+               };
+
+               q6_mpss_dtb_mem: q6-mpss-dtb@9ec00000 {
+                       reg = <0x0 0x9ec00000 0x0 0x80000>;
+                       no-map;
+               };
+
+               tenx_mem: tenx@a0000000 {
+                       reg = <0x0 0xa0000000 0x0 0x19600000>;
+                       no-map;
+               };
+
+               oem_tenx_mem: oem-tenx@b9600000 {
+                       reg = <0x0 0xb9600000 0x0 0x6a00000>;
+                       no-map;
+               };
+
+               tenx_q6_buffer_mem: tenx-q6-buffer@c0000000 {
+                       reg = <0x0 0xc0000000 0x0 0x3200000>;
+                       no-map;
+               };
+
+               ipa_buffer_mem: ipa-buffer@c3200000 {
+                       reg = <0x0 0xc3200000 0x0 0x12c00000>;
+                       no-map;
+               };
+       };
+
+       soc: soc@0 {
+               compatible = "simple-bus";
+               #address-cells = <2>;
+               #size-cells = <2>;
+               ranges = <0 0 0 0 0x10 0>;
+               dma-ranges = <0 0 0 0 0x10 0>;
+
+               gcc: clock-controller@80000 {
+                       compatible = "qcom,qdu1000-gcc";
+                       reg = <0x0 0x80000 0x0 0x1f4200>;
+                       clocks = <&rpmhcc RPMH_CXO_CLK>,
+                                <&sleep_clk>,
+                                <0>,
+                                <0>,
+                                <0>;
+                       #clock-cells = <1>;
+                       #reset-cells = <1>;
+                       #power-domain-cells = <1>;
+               };
+
+               gpi_dma0: dma-controller@900000  {
+                       compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma";
+                       reg = <0x0 0x900000 0x0 0x60000>;
+                       interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+                       dma-channels = <12>;
+                       dma-channel-mask = <0x3f>;
+                       iommus = <&apps_smmu 0xf6 0x0>;
+                       #dma-cells = <3>;
+               };
+
+               qupv3_id_0: geniqup@9c0000 {
+                       compatible = "qcom,geni-se-qup";
+                       reg = <0x0 0x9c0000 0x0 0x2000>;
+                       clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+                               <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+                       clock-names = "m-ahb", "s-ahb";
+                       iommus = <&apps_smmu 0xe3 0x0>;
+                       interconnects = <&clk_virt MASTER_QUP_CORE_0 0
+                                        &clk_virt SLAVE_QUP_CORE_0 0>;
+                       interconnect-names = "qup-core";
+
+                       #address-cells = <2>;
+                       #size-cells = <2>;
+                       ranges;
+                       status = "disabled";
+
+                       uart0: serial@980000 {
+                               compatible = "qcom,geni-uart";
+                               reg = <0x0 0x980000 0x0 0x4000>;
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+                               clock-names = "se";
+                               pinctrl-0 = <&qup_uart0_default>;
+                               pinctrl-names = "default";
+                               interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       i2c1: i2c@984000 {
+                               compatible = "qcom,geni-i2c";
+                               reg = <0x0 0x984000 0x0 0x4000>;
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+                               clock-names = "se";
+                               interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+                               pinctrl-0 = <&qup_i2c1_data_clk>;
+                               pinctrl-names = "default";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       spi1: spi@984000 {
+                               compatible = "qcom,geni-spi";
+                               reg = <0x0 0x984000 0x0 0x4000>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+                               clock-names = "se";
+                               pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+                               pinctrl-names = "default";
+                               status = "disabled";
+                       };
+
+                       i2c2: i2c@988000 {
+                               compatible = "qcom,geni-i2c";
+                               reg = <0x0 0x988000 0x0 0x4000>;
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+                               clock-names = "se";
+                               interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+                               pinctrl-0 = <&qup_i2c2_data_clk>;
+                               pinctrl-names = "default";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       spi2: spi@988000 {
+                               compatible = "qcom,geni-spi";
+                               reg = <0x0 0x988000 0x0 0x4000>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+                               clock-names = "se";
+                               pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+                               pinctrl-names = "default";
+                               status = "disabled";
+                       };
+
+                       i2c3: i2c@98c000 {
+                               compatible = "qcom,geni-i2c";
+                               reg = <0x0 0x98c000 0x0 0x4000>;
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+                               clock-names = "se";
+                               interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+                               pinctrl-0 = <&qup_i2c3_data_clk>;
+                               pinctrl-names = "default";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       spi3: spi@98c000 {
+                               compatible = "qcom,geni-spi";
+                               reg = <0x0 0x98c000 0x0 0x4000>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+                               clock-names = "se";
+                               pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+                               pinctrl-names = "default";
+                               status = "disabled";
+                       };
+
+                       i2c4: i2c@990000 {
+                               compatible = "qcom,geni-i2c";
+                               reg = <0x0 0x990000 0x0 0x4000>;
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+                               clock-names = "se";
+                               interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+                               pinctrl-0 = <&qup_i2c4_data_clk>;
+                               pinctrl-names = "default";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       spi4: spi@990000 {
+                               compatible = "qcom,geni-spi";
+                               reg = <0x0 0x990000 0x0 0x4000>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+                               clock-names = "se";
+                               pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+                               pinctrl-names = "default";
+                               status = "disabled";
+                       };
+
+                       i2c5: i2c@994000 {
+                               compatible = "qcom,geni-i2c";
+                               reg = <0x0 0x994000 0x0 0x4000>;
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+                               clock-names = "se";
+                               interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+                               pinctrl-0 = <&qup_i2c5_data_clk>;
+                               pinctrl-names = "default";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       spi5: spi@994000 {
+                               compatible = "qcom,geni-spi";
+                               reg = <0x0 0x994000 0x0 0x4000>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+                               clock-names = "se";
+                               pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+                               pinctrl-names = "default";
+                               status = "disabled";
+                       };
+
+                       i2c6: i2c@998000 {
+                               compatible = "qcom,geni-i2c";
+                               reg = <0x0 0x998000 0x0 0x4000>;
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+                               clock-names = "se";
+                               interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+                               pinctrl-0 = <&qup_i2c6_data_clk>;
+                               pinctrl-names = "default";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       spi6: spi@998000 {
+                               compatible = "qcom,geni-spi";
+                               reg = <0x0 0x998000 0x0 0x4000>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+                               clock-names = "se";
+                               pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+                               pinctrl-names = "default";
+                               status = "disabled";
+                       };
+
+                       uart7: serial@99c000 {
+                               compatible = "qcom,geni-debug-uart";
+                               reg = <0x0 0x99c000 0x0 0x4000>;
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+                               clock-names = "se";
+                               pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
+                               pinctrl-names = "default";
+                               interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+               };
+
+               gpi_dma1: dma-controller@a00000  {
+                       compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma";
+                       reg = <0x0 0xa00000 0x0 0x60000>;
+                       interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+                       dma-channels = <12>;
+                       dma-channel-mask = <0x3f>;
+                       iommus = <&apps_smmu 0x116 0x0>;
+                       #dma-cells = <3>;
+               };
+
+               qupv3_id_1: geniqup@ac0000 {
+                       compatible = "qcom,geni-se-qup";
+                       reg = <0x0 0xac0000 0x0 0x2000>;
+                       clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+                               <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+                       clock-names = "m-ahb", "s-ahb";
+                       iommus = <&apps_smmu 0x103 0x0>;
+                       #address-cells = <2>;
+                       #size-cells = <2>;
+                       ranges;
+                       status = "disabled";
+
+                       uart8: serial@a80000 {
+                               compatible = "qcom,geni-uart";
+                               reg = <0x0 0xa80000 0x0 0x4000>;
+                               clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+                               clock-names = "se";
+                               pinctrl-0 = <&qup_uart8_default>;
+                               pinctrl-names = "default";
+                               interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       i2c9: i2c@a84000 {
+                               compatible = "qcom,geni-i2c";
+                               reg = <0x0 0xa84000 0x0 0x4000>;
+                               clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+                               clock-names = "se";
+                               interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+                               pinctrl-0 = <&qup_i2c9_data_clk>;
+                               pinctrl-names = "default";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       spi9: spi@a84000 {
+                               compatible = "qcom,geni-spi";
+                               reg = <0x0 0xa84000 0x0 0x4000>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+                               clock-names = "se";
+                               pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+                               pinctrl-names = "default";
+                               status = "disabled";
+                       };
+
+                       i2c10: i2c@a88000 {
+                               compatible = "qcom,geni-i2c";
+                               reg = <0x0 0xa88000 0x0 0x4000>;
+                               clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+                               clock-names = "se";
+                               interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+                               pinctrl-0 = <&qup_i2c10_data_clk>;
+                               pinctrl-names = "default";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       spi10: spi@a88000 {
+                               compatible = "qcom,geni-spi";
+                               reg = <0x0 0xa88000 0x0 0x4000>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+                               clock-names = "se";
+                               pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+                               pinctrl-names = "default";
+                               status = "disabled";
+                       };
+
+                       i2c11: i2c@a8c000 {
+                               compatible = "qcom,geni-i2c";
+                               reg = <0x0 0xa8c000 0x0 0x4000>;
+                               clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+                               clock-names = "se";
+                               interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+                               pinctrl-0 = <&qup_i2c11_data_clk>;
+                               pinctrl-names = "default";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       spi11: spi@a8c000 {
+                               compatible = "qcom,geni-spi";
+                               reg = <0x0 0xa8c000 0x0 0x4000>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+                               clock-names = "se";
+                               pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
+                               pinctrl-names = "default";
+                               status = "disabled";
+                       };
+
+                       i2c12: i2c@a90000 {
+                               compatible = "qcom,geni-i2c";
+                               reg = <0x0 0xa90000 0x0 0x4000>;
+                               clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+                               clock-names = "se";
+                               interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+                               pinctrl-0 = <&qup_i2c12_data_clk>;
+                               pinctrl-names = "default";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       spi12: spi@a90000 {
+                               compatible = "qcom,geni-spi";
+                               reg = <0x0 0xa90000 0x0 0x4000>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+                               clock-names = "se";
+                               pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+                               pinctrl-names = "default";
+                               status = "disabled";
+                       };
+
+                       i2c13: i2c@a94000 {
+                               compatible = "qcom,geni-i2c";
+                               reg = <0x0 0xa94000 0x0 0x4000>;
+                               clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+                               clock-names = "se";
+                               interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+                               pinctrl-0 = <&qup_i2c13_data_clk>;
+                               pinctrl-names = "default";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       uart13: serial@a94000 {
+                               compatible = "qcom,geni-uart";
+                               reg = <0x0 0xa94000 0x0 0x4000>;
+                               clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+                               clock-names = "se";
+                               pinctrl-0 = <&qup_uart13_default>;
+                               pinctrl-names = "default";
+                               interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       spi13: spi@a94000 {
+                               compatible = "qcom,geni-spi";
+                               reg = <0x0 0xa94000 0x0 0x4000>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+                               clock-names = "se";
+                               pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+                               pinctrl-names = "default";
+                               status = "disabled";
+                       };
+
+                       i2c14: i2c@a98000 {
+                               compatible = "qcom,geni-i2c";
+                               reg = <0x0 0xa98000 0x0 0x4000>;
+                               clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+                               clock-names = "se";
+                               interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+                               pinctrl-0 = <&qup_i2c14_data_clk>;
+                               pinctrl-names = "default";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       spi14: spi@a98000 {
+                               compatible = "qcom,geni-spi";
+                               reg = <0x0 0xa98000 0x0 0x4000>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+                               clock-names = "se";
+                               pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
+                               pinctrl-names = "default";
+                               status = "disabled";
+                       };
+
+                       i2c15: i2c@a9c000 {
+                               compatible = "qcom,geni-i2c";
+                               reg = <0x0 0xa9c000 0x0 0x4000>;
+                               clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+                               clock-names = "se";
+                               interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
+                               pinctrl-0 = <&qup_i2c15_data_clk>;
+                               pinctrl-names = "default";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       spi15: spi@a9c000 {
+                               compatible = "qcom,geni-spi";
+                               reg = <0x0 0xa9c000 0x0 0x4000>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+                               clock-names = "se";
+                               pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
+                               pinctrl-names = "default";
+                               status = "disabled";
+                       };
+               };
+
+               system_noc: interconnect@1640000 {
+                       compatible = "qcom,qdu1000-system-noc";
+                       reg = <0x0 0x1640000 0x0 0x45080>;
+                       qcom,bcm-voters = <&apps_bcm_voter>;
+                       #interconnect-cells = <2>;
+               };
+
+               tcsr_mutex: hwlock@1f40000 {
+                       compatible = "qcom,tcsr-mutex";
+                       reg = <0x0 0x1f40000 0x0 0x20000>;
+                       #hwlock-cells = <1>;
+               };
+
+               pdc: interrupt-controller@b220000 {
+                       compatible = "qcom,qdu1000-pdc", "qcom,pdc";
+                       reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
+                       qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>,
+                                         <94 609 31>, <125 63 1>;
+                       #interrupt-cells = <2>;
+                       interrupt-parent = <&intc>;
+                       interrupt-controller;
+               };
+
+               spmi_bus: spmi@c400000 {
+                       compatible = "qcom,spmi-pmic-arb";
+                       reg = <0x0 0xc400000 0x0 0x3000>,
+                             <0x0 0xc500000 0x0 0x400000>,
+                             <0x0 0xc440000 0x0 0x80000>,
+                             <0x0 0xc4c0000 0x0 0x10000>,
+                             <0x0 0xc42d000 0x0 0x4000>;
+                       reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+                       interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "periph_irq";
+                       qcom,ee = <0>;
+                       qcom,channel = <0>;
+                       #address-cells = <2>;
+                       #size-cells = <0>;
+                       interrupt-controller;
+                       #interrupt-cells = <4>;
+               };
+
+               tlmm: pinctrl@f000000 {
+                       compatible = "qcom,qdu1000-tlmm";
+                       reg = <0x0 0xf000000 0x0 0x1000000>;
+                       interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+                       gpio-ranges = <&tlmm 0 0 151>;
+                       wakeup-parent = <&pdc>;
+
+                       qup_uart0_default: qup-uart0-default-state {
+                               pins = "gpio6", "gpio7", "gpio8", "gpio9";
+                               function = "qup00";
+                       };
+
+                       qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+                               pins = "gpio10", "gpio11";
+                               function = "qup01";
+                       };
+
+                       qup_spi1_data_clk: qup-spi1-data-clk-state {
+                               pins = "gpio10", "gpio11", "gpio12";
+                               function = "qup01";
+                       };
+
+                       qup_spi1_cs: qup-spi1-cs-state {
+                               pins = "gpio13";
+                               function = "gpio";
+                       };
+
+                       qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+                               pins = "gpio12", "gpio13";
+                               function = "qup02";
+                       };
+
+                       qup_spi2_data_clk: qup-spi2-data-clk-state {
+                               pins = "gpio12", "gpio13", "gpio10";
+                               function = "qup02";
+                       };
+
+                       qup_spi2_cs: qup-spi2-cs-state {
+                               pins = "gpio11";
+                               function = "gpio";
+                       };
+
+                       qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+                               pins = "gpio14", "gpio15";
+                               function = "qup03";
+                       };
+
+                       qup_spi3_data_clk: qup-spi3-data-clk-state {
+                               pins = "gpio14", "gpio15", "gpio16";
+                               function = "qup03";
+                       };
+
+                       qup_spi3_cs: qup-spi3-cs-state {
+                               pins = "gpio17";
+                               function = "gpio";
+                       };
+
+                       qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+                               pins = "gpio16", "gpio17";
+                               function = "qup04";
+                       };
+
+                       qup_spi4_data_clk: qup-spi4-data-clk-state {
+                               pins = "gpio16", "gpio17", "gpio14";
+                               function = "qup04";
+                       };
+
+                       qup_spi4_cs: qup-spi4-cs-state {
+                               pins = "gpio15";
+                               function = "gpio";
+                       };
+
+                       qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+                               pins = "gpio130", "gpio131";
+                               function = "qup05";
+                       };
+
+                       qup_spi5_data_clk: qup-spi5-data-clk-state {
+                               pins = "gpio130", "gpio131", "gpio132";
+                               function = "qup05";
+                       };
+
+                       qup_spi5_cs: qup-spi5-cs-state {
+                               pins = "gpio133";
+                               function = "gpio";
+                       };
+
+                       qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+                               pins = "gpio132", "gpio133";
+                               function = "qup06";
+                       };
+
+                       qup_spi6_data_clk: qup-spi6-data-clk-state {
+                               pins = "gpio132", "gpio133", "gpio130";
+                               function = "qup06";
+                       };
+
+                       qup_spi6_cs: qup-spi6-cs-state {
+                               pins = "gpio131";
+                               function = "gpio";
+                       };
+
+                       qup_uart7_rx: qup-uart7-rx-state {
+                               pins = "gpio135";
+                               function = "qup07";
+                       };
+
+                       qup_uart7_tx: qup-uart7-tx-state  {
+                               pins = "gpio134";
+                               function = "qup07";
+                       };
+
+                       qup_uart8_default: qup-uart8-default-state {
+                               pins = "gpio18", "gpio19", "gpio20", "gpio21";
+                               function = "qup10";
+                       };
+
+                       qup_i2c9_data_clk: qup-i2c9-data-clk-state {
+                               pins = "gpio22", "gpio23";
+                               function = "qup11";
+                       };
+
+                       qup_spi9_data_clk: qup-spi9-data-clk-state {
+                               pins = "gpio22", "gpio23", "gpio24";
+                               function = "qup11";
+                       };
+
+                       qup_spi9_cs: qup-spi9-cs-state {
+                               pins = "gpio25";
+                               function = "gpio";
+                       };
+
+                       qup_i2c10_data_clk: qup-i2c10-data-clk-state {
+                               pins = "gpio24", "gpio25";
+                               function = "qup12";
+                       };
+
+                       qup_spi10_data_clk: qup-spi10-data-clk-state {
+                               pins = "gpio24", "gpio25", "gpio22";
+                               function = "qup12";
+                       };
+
+                       qup_spi10_cs: qup-spi10-cs-state {
+                               pins = "gpio23";
+                               function = "gpio";
+                       };
+
+                       qup_i2c11_data_clk: qup-i2c11-data-clk-state {
+                               pins = "gpio26", "gpio27";
+                               function = "qup13";
+                       };
+
+                       qup_spi11_data_clk: qup-spi11-data-clk-state {
+                               pins = "gpio26", "gpio27", "gpio28";
+                               function = "qup13";
+                       };
+
+                       qup_spi11_cs: qup-spi11-cs-state {
+                               pins = "gpio29";
+                               function = "gpio";
+                       };
+
+                       qup_i2c12_data_clk: qup-i2c12-data-clk-state {
+                               pins = "gpio28", "gpio29";
+                               function = "qup14";
+                       };
+
+                       qup_spi12_data_clk: qup-spi12-data-clk-state {
+                               pins = "gpio28", "gpio29", "gpio26";
+                               function = "qup14";
+                       };
+
+                       qup_spi12_cs: qup-spi12-cs-state {
+                               pins = "gpio27";
+                               function = "gpio";
+                       };
+
+                       qup_i2c13_data_clk: qup-i2c13-data-clk-state {
+                               pins = "gpio30", "gpio31";
+                               function = "qup15";
+                       };
+
+                       qup_spi13_data_clk: qup-spi13-data-clk-state {
+                               pins = "gpio30", "gpio31", "gpio32";
+                               function = "qup15";
+                       };
+
+                       qup_spi13_cs: qup-spi13-cs-state {
+                               pins = "gpio33";
+                               function = "gpio";
+                       };
+
+                       qup_uart13_default: qup-uart13-default-state {
+                               pins = "gpio30", "gpio31", "gpio32", "gpio33";
+                               function = "qup15";
+                       };
+
+                       qup_i2c14_data_clk: qup-i2c14-data-clk-state {
+                               pins = "gpio34", "gpio35";
+                               function = "qup16";
+                       };
+
+                       qup_spi14_data_clk: qup-spi14-data-clk-state {
+                               pins = "gpio34", "gpio35", "gpio36";
+                               function = "qup16";
+                       };
+
+                       qup_spi14_cs: qup-spi14-cs-state {
+                               pins = "gpio37", "gpio38";
+                               function = "gpio";
+                       };
+
+                       qup_i2c15_data_clk: qup-i2c15-data-clk-state {
+                               pins = "gpio40", "gpio41";
+                               function = "qup17";
+                       };
+
+                       qup_spi15_data_clk: qup-spi15-data-clk-state {
+                               pins = "gpio40", "gpio41", "gpio30";
+                               function = "qup17";
+                       };
+
+                       qup_spi15_cs: qup-spi15-cs-state {
+                               pins = "gpio31";
+                               function = "gpio";
+                       };
+               };
+
+               apps_smmu: iommu@15000000 {
+                       compatible = "qcom,qdu1000-smmu-500", "arm,mmu-500";
+                       reg = <0x0 0x15000000 0x0 0x100000>;
+                       #iommu-cells = <2>;
+                       #global-interrupts = <2>;
+                       interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
+               };
+
+               intc: interrupt-controller@17200000 {
+                       compatible = "arm,gic-v3";
+                       reg = <0x0 0x17200000 0x0 0x10000>,     /* GICD */
+                             <0x0 0x17260000 0x0 0x80000>;     /* GICR * 4 */
+                       interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+                       #interrupt-cells = <3>;
+                       interrupt-controller;
+                       #redistributor-regions = <1>;
+                       redistributor-stride = <0x0 0x20000>;
+               };
+
+               timer@17420000 {
+                       compatible = "arm,armv7-timer-mem";
+                       reg = <0x0 0x17420000 0x0 0x1000>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges = <0x0 0x0 0x0 0x20000000>;
+
+                       frame@17421000 {
+                               reg = <0x17421000 0x1000>,
+                                     <0x17422000 0x1000>;
+                               interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+                               frame-number = <0>;
+                       };
+
+                       frame@17423000 {
+                               reg = <0x17423000 0x1000>;
+                               interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+                               frame-number = <1>;
+                               status = "disabled";
+                       };
+
+                       frame@17425000 {
+                               reg = <0x17425000 0x1000>,
+                                     <0x17426000 0x1000>;
+                               interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+                               frame-number = <2>;
+                               status = "disabled";
+                       };
+
+                       frame@17427000 {
+                               reg = <0x17427000 0x1000>;
+                               interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+                               frame-number = <3>;
+                               status = "disabled";
+                       };
+
+                       frame@17429000 {
+                               reg = <0x17429000 0x1000>;
+                               interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+                               frame-number = <4>;
+                               status = "disabled";
+                       };
+
+                       frame@1742b000 {
+                               reg = <0x1742b000 0x1000>;
+                               interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+                               frame-number = <5>;
+                               status = "disabled";
+                       };
+
+                       frame@1742d000 {
+                               reg = <0x1742d000 0x1000>;
+                               interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+                               frame-number = <6>;
+                               status = "disabled";
+                       };
+               };
+
+               apps_rsc: rsc@17a00000 {
+                       compatible = "qcom,rpmh-rsc";
+                       reg = <0x0 0x17a00000 0x0 0x10000>,
+                             <0x0 0x17a10000 0x0 0x10000>,
+                             <0x0 0x17a20000 0x0 0x10000>;
+                       reg-names = "drv-0", "drv-1", "drv-2";
+                       interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+                       qcom,tcs-offset = <0xd00>;
+                       qcom,drv-id = <2>;
+                       qcom,tcs-config = <ACTIVE_TCS    2>, <SLEEP_TCS     3>,
+                                         <WAKE_TCS      3>, <CONTROL_TCS   0>;
+                       label = "apps_rsc";
+
+                       apps_bcm_voter: bcm-voter {
+                               compatible = "qcom,bcm-voter";
+                       };
+
+                       rpmhcc: clock-controller {
+                               compatible = "qcom,qdu1000-rpmh-clk";
+                               clocks = <&xo_board>;
+                               clock-names = "xo";
+                               #clock-cells = <1>;
+                       };
+
+                       rpmhpd: power-controller {
+                               compatible = "qcom,qdu1000-rpmhpd";
+                               #power-domain-cells = <1>;
+                               operating-points-v2 = <&rpmhpd_opp_table>;
+
+                               rpmhpd_opp_table: opp-table {
+                                       compatible = "operating-points-v2";
+
+                                       rpmhpd_opp_ret: opp1 {
+                                               opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+                                       };
+
+                                       rpmhpd_opp_min_svs: opp2 {
+                                               opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+                                       };
+
+                                       rpmhpd_opp_low_svs: opp3 {
+                                               opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+                                       };
+
+                                       rpmhpd_opp_svs: opp4 {
+                                               opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+                                       };
+
+                                       rpmhpd_opp_svs_l1: opp5 {
+                                               opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+                                       };
+
+                                       rpmhpd_opp_nom: opp6 {
+                                               opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+                                       };
+
+                                       rpmhpd_opp_nom_l1: opp7 {
+                                               opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+                                       };
+
+                                       rpmhpd_opp_nom_l2: opp8 {
+                                               opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+                                       };
+
+                                       rpmhpd_opp_turbo: opp9 {
+                                               opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+                                       };
+
+                                       rpmhpd_opp_turbo_l1: opp10 {
+                                               opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+                                       };
+                               };
+                       };
+               };
+
+               cpufreq_hw: cpufreq@17d90000 {
+                       compatible = "qcom,qdu1000-cpufreq-epss", "qcom,cpufreq-epss";
+                       reg = <0x0 0x17d90000 0x0 0x1000>, <0x0 0x17d91000 0x0 0x1000>;
+                       reg-names = "freq-domain0", "freq-domain1";
+                       clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+                       clock-names = "xo", "alternate";
+                       #freq-domain-cells = <1>;
+               };
+
+               gem_noc: interconnect@19100000 {
+                       compatible = "qcom,qdu1000-gem-noc";
+                       reg = <0x0 0x19100000 0x0 0xB8080>;
+                       qcom,bcm-voters = <&apps_bcm_voter>;
+                       #interconnect-cells = <2>;
+               };
+       };
+
+       timer {
+               compatible = "arm,armv8-timer";
+               interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+                            <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+                            <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+                            <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+                            <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+       };
+};
diff --git a/arch/arm64/boot/dts/qcom/qru1000.dtsi b/arch/arm64/boot/dts/qcom/qru1000.dtsi
new file mode 100644 (file)
index 0000000..eac5dc5
--- /dev/null
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include "qdu1000.dtsi"
+/delete-node/ &tenx_mem;
+/delete-node/ &oem_tenx_mem;
+/delete-node/ &tenx_q6_buffer_mem;
+
+&reserved_memory {
+       oem_tenx_mem: oem-tenx@a0000000 {
+               reg = <0x0 0xa0000000 0x0 0x6400000>;
+               no-map;
+       };
+
+       mpss_diag_buffer_mem: mpss-diag-buffer@aea00000 {
+               reg = <0x0 0xaea00000 0x0 0x6400000>;
+               no-map;
+       };
+
+       tenx_q6_buffer_mem: tenx-q6-buffer@b4e00000 {
+               reg = <0x0 0xb4e00000 0x0 0x3200000>;
+               no-map;
+       };
+};