// SPDX-License-Identifier: GPL-2.0
/* Copyright (c) 2019 HiSilicon Limited. */
#include <asm/page.h>
+#include <linux/acpi.h>
+#include <linux/aer.h>
#include <linux/bitmap.h>
#include <linux/debugfs.h>
#include <linux/dma-mapping.h>
#define QM_DFX_CNT_CLR_CE 0x100118
#define QM_ABNORMAL_INT_SOURCE 0x100000
+#define QM_ABNORMAL_INT_SOURCE_CLR GENMASK(12, 0)
#define QM_ABNORMAL_INT_MASK 0x100004
#define QM_ABNORMAL_INT_MASK_VALUE 0x1fff
#define QM_ABNORMAL_INT_STATUS 0x100008
+#define QM_ABNORMAL_INT_SET 0x10000c
#define QM_ABNORMAL_INF00 0x100010
#define QM_FIFO_OVERFLOW_TYPE 0xc0
#define QM_FIFO_OVERFLOW_TYPE_SHIFT 6
#define QM_RAS_CE_TIMES_PER_IRQ 1
#define QM_RAS_MSI_INT_SEL 0x1040f4
+#define QM_DEV_RESET_FLAG 0
+#define QM_RESET_WAIT_TIMEOUT 400
+#define QM_PEH_VENDOR_ID 0x1000d8
+#define ACC_VENDOR_ID_VALUE 0x5a5a
+#define QM_PEH_DFX_INFO0 0x1000fc
+#define ACC_PEH_SRIOV_CTRL_VF_MSE_SHIFT 3
+#define ACC_PEH_MSI_DISABLE GENMASK(31, 0)
+#define ACC_MASTER_GLOBAL_CTRL_SHUTDOWN 0x1
+#define ACC_MASTER_TRANS_RETURN_RW 3
+#define ACC_MASTER_TRANS_RETURN 0x300150
+#define ACC_MASTER_GLOBAL_CTRL 0x300000
+#define ACC_AM_CFG_PORT_WR_EN 0x30001c
+#define QM_RAS_NFE_MBIT_DISABLE ~QM_ECC_MBIT
+#define ACC_AM_ROB_ECC_INT_STS 0x300104
+#define ACC_ROB_ECC_ERR_MULTPL BIT(1)
+
+#define POLL_PERIOD 10
+#define POLL_TIMEOUT 1000
+#define MAX_WAIT_COUNTS 1000
#define QM_CACHE_WB_START 0x204
#define QM_CACHE_WB_DONE 0x208
{
u32 irq_enable = ce | nfe | fe | msi;
u32 irq_unmask = ~irq_enable;
+ u32 error_status;
qm->error_mask = ce | nfe | fe;
qm->msi_mask = msi;
+ /* clear QM hw residual error source */
+ error_status = readl(qm->io_base + QM_ABNORMAL_INT_STATUS);
+ if (error_status) {
+ error_status &= qm->error_mask;
+ writel(error_status, qm->io_base + QM_ABNORMAL_INT_SOURCE);
+ }
+
/* configure error type */
writel(ce, qm->io_base + QM_RAS_CE_ENABLE);
writel(QM_RAS_CE_TIMES_PER_IRQ, qm->io_base + QM_RAS_CE_THRESHOLD);
error_status = qm->error_mask & tmp;
if (error_status) {
+ if (error_status & QM_ECC_MBIT)
+ qm->err_status.is_qm_ecc_mbit = true;
+
qm_log_hw_error(qm, error_status);
/* clear err sts */
}
EXPORT_SYMBOL_GPL(hisi_qm_start);
+static int qm_restart(struct hisi_qm *qm)
+{
+ struct device *dev = &qm->pdev->dev;
+ struct hisi_qp *qp;
+ int ret, i;
+
+ ret = hisi_qm_start(qm);
+ if (ret < 0)
+ return ret;
+
+ write_lock(&qm->qps_lock);
+ for (i = 0; i < qm->qp_num; i++) {
+ qp = qm->qp_array[i];
+ if (qp) {
+ ret = hisi_qm_start_qp(qp, 0);
+ if (ret < 0) {
+ dev_err(dev, "Failed to start qp%d!\n", i);
+
+ write_unlock(&qm->qps_lock);
+ return ret;
+ }
+ }
+ }
+ write_unlock(&qm->qps_lock);
+
+ return 0;
+}
+
+/**
+ * This function clears all queues memory in a qm. Reset of accelerator can
+ * use this to clear queues.
+ */
+static void qm_clear_queues(struct hisi_qm *qm)
+{
+ struct hisi_qp *qp;
+ int i;
+
+ for (i = 0; i < qm->qp_num; i++) {
+ qp = qm->qp_array[i];
+ if (qp)
+ memset(qp->qdma.va, 0, qp->qdma.size);
+ }
+
+ memset(qm->qdma.va, 0, qm->qdma.size);
+}
+
/**
* hisi_qm_stop() - Stop a qm.
* @qm: The qm which will be stopped.
dev_err(dev, "Failed to set vft!\n");
}
+ qm_clear_queues(qm);
+
return ret;
}
EXPORT_SYMBOL_GPL(hisi_qm_stop);
/* get device hardware error status */
err_sts = qm->err_ini->get_dev_hw_err_status(qm);
if (err_sts) {
+ if (err_sts & qm->err_ini->err_info.ecc_2bits_mask)
+ qm->err_status.is_dev_ecc_mbit = true;
+
if (!qm->err_ini->log_dev_hw_err) {
dev_err(&qm->pdev->dev, "Device doesn't support log hw error!\n");
return PCI_ERS_RESULT_NEED_RESET;
}
EXPORT_SYMBOL_GPL(hisi_qm_dev_err_detected);
+static int qm_check_req_recv(struct hisi_qm *qm)
+{
+ struct pci_dev *pdev = qm->pdev;
+ int ret;
+ u32 val;
+
+ writel(ACC_VENDOR_ID_VALUE, qm->io_base + QM_PEH_VENDOR_ID);
+ ret = readl_relaxed_poll_timeout(qm->io_base + QM_PEH_VENDOR_ID, val,
+ (val == ACC_VENDOR_ID_VALUE),
+ POLL_PERIOD, POLL_TIMEOUT);
+ if (ret) {
+ dev_err(&pdev->dev, "Fails to read QM reg!\n");
+ return ret;
+ }
+
+ writel(PCI_VENDOR_ID_HUAWEI, qm->io_base + QM_PEH_VENDOR_ID);
+ ret = readl_relaxed_poll_timeout(qm->io_base + QM_PEH_VENDOR_ID, val,
+ (val == PCI_VENDOR_ID_HUAWEI),
+ POLL_PERIOD, POLL_TIMEOUT);
+ if (ret)
+ dev_err(&pdev->dev, "Fails to read QM reg in the second time!\n");
+
+ return ret;
+}
+
+static int qm_set_pf_mse(struct hisi_qm *qm, bool set)
+{
+ struct pci_dev *pdev = qm->pdev;
+ u16 cmd;
+ int i;
+
+ pci_read_config_word(pdev, PCI_COMMAND, &cmd);
+ if (set)
+ cmd |= PCI_COMMAND_MEMORY;
+ else
+ cmd &= ~PCI_COMMAND_MEMORY;
+
+ pci_write_config_word(pdev, PCI_COMMAND, cmd);
+ for (i = 0; i < MAX_WAIT_COUNTS; i++) {
+ pci_read_config_word(pdev, PCI_COMMAND, &cmd);
+ if (set == ((cmd & PCI_COMMAND_MEMORY) >> 1))
+ return 0;
+
+ udelay(1);
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int qm_set_vf_mse(struct hisi_qm *qm, bool set)
+{
+ struct pci_dev *pdev = qm->pdev;
+ u16 sriov_ctrl;
+ int pos;
+ int i;
+
+ pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_SRIOV);
+ pci_read_config_word(pdev, pos + PCI_SRIOV_CTRL, &sriov_ctrl);
+ if (set)
+ sriov_ctrl |= PCI_SRIOV_CTRL_MSE;
+ else
+ sriov_ctrl &= ~PCI_SRIOV_CTRL_MSE;
+ pci_write_config_word(pdev, pos + PCI_SRIOV_CTRL, sriov_ctrl);
+
+ for (i = 0; i < MAX_WAIT_COUNTS; i++) {
+ pci_read_config_word(pdev, pos + PCI_SRIOV_CTRL, &sriov_ctrl);
+ if (set == (sriov_ctrl & PCI_SRIOV_CTRL_MSE) >>
+ ACC_PEH_SRIOV_CTRL_VF_MSE_SHIFT)
+ return 0;
+
+ udelay(1);
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int qm_set_msi(struct hisi_qm *qm, bool set)
+{
+ struct pci_dev *pdev = qm->pdev;
+
+ if (set) {
+ pci_write_config_dword(pdev, pdev->msi_cap + PCI_MSI_MASK_64,
+ 0);
+ } else {
+ pci_write_config_dword(pdev, pdev->msi_cap + PCI_MSI_MASK_64,
+ ACC_PEH_MSI_DISABLE);
+ if (qm->err_status.is_qm_ecc_mbit ||
+ qm->err_status.is_dev_ecc_mbit)
+ return 0;
+
+ mdelay(1);
+ if (readl(qm->io_base + QM_PEH_DFX_INFO0))
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+static int qm_vf_reset_prepare(struct hisi_qm *qm)
+{
+ struct hisi_qm_list *qm_list = qm->qm_list;
+ struct pci_dev *pdev = qm->pdev;
+ struct pci_dev *virtfn;
+ struct hisi_qm *vf_qm;
+ int ret = 0;
+
+ mutex_lock(&qm_list->lock);
+ list_for_each_entry(vf_qm, &qm_list->list, list) {
+ virtfn = vf_qm->pdev;
+ if (virtfn == pdev)
+ continue;
+
+ if (pci_physfn(virtfn) == pdev) {
+ ret = hisi_qm_stop(vf_qm);
+ if (ret)
+ goto stop_fail;
+ }
+ }
+
+stop_fail:
+ mutex_unlock(&qm_list->lock);
+ return ret;
+}
+
+static int qm_reset_prepare_ready(struct hisi_qm *qm)
+{
+ struct pci_dev *pdev = qm->pdev;
+ struct hisi_qm *pf_qm = pci_get_drvdata(pci_physfn(pdev));
+ int delay = 0;
+
+ /* All reset requests need to be queued for processing */
+ while (test_and_set_bit(QM_DEV_RESET_FLAG, &pf_qm->reset_flag)) {
+ msleep(++delay);
+ if (delay > QM_RESET_WAIT_TIMEOUT)
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+static int qm_controller_reset_prepare(struct hisi_qm *qm)
+{
+ struct pci_dev *pdev = qm->pdev;
+ int ret;
+
+ ret = qm_reset_prepare_ready(qm);
+ if (ret) {
+ pci_err(pdev, "Controller reset not ready!\n");
+ return ret;
+ }
+
+ if (qm->vfs_num) {
+ ret = qm_vf_reset_prepare(qm);
+ if (ret) {
+ pci_err(pdev, "Fails to stop VFs!\n");
+ return ret;
+ }
+ }
+
+ ret = hisi_qm_stop(qm);
+ if (ret) {
+ pci_err(pdev, "Fails to stop QM!\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static void qm_dev_ecc_mbit_handle(struct hisi_qm *qm)
+{
+ u32 nfe_enb = 0;
+
+ if (!qm->err_status.is_dev_ecc_mbit &&
+ qm->err_status.is_qm_ecc_mbit &&
+ qm->err_ini->close_axi_master_ooo) {
+
+ qm->err_ini->close_axi_master_ooo(qm);
+
+ } else if (qm->err_status.is_dev_ecc_mbit &&
+ !qm->err_status.is_qm_ecc_mbit &&
+ !qm->err_ini->close_axi_master_ooo) {
+
+ nfe_enb = readl(qm->io_base + QM_RAS_NFE_ENABLE);
+ writel(nfe_enb & QM_RAS_NFE_MBIT_DISABLE,
+ qm->io_base + QM_RAS_NFE_ENABLE);
+ writel(QM_ECC_MBIT, qm->io_base + QM_ABNORMAL_INT_SET);
+ }
+}
+
+static int qm_soft_reset(struct hisi_qm *qm)
+{
+ struct pci_dev *pdev = qm->pdev;
+ int ret;
+ u32 val;
+
+ /* Ensure all doorbells and mailboxes received by QM */
+ ret = qm_check_req_recv(qm);
+ if (ret)
+ return ret;
+
+ if (qm->vfs_num) {
+ ret = qm_set_vf_mse(qm, false);
+ if (ret) {
+ pci_err(pdev, "Fails to disable vf MSE bit.\n");
+ return ret;
+ }
+ }
+
+ ret = qm_set_msi(qm, false);
+ if (ret) {
+ pci_err(pdev, "Fails to disable PEH MSI bit.\n");
+ return ret;
+ }
+
+ qm_dev_ecc_mbit_handle(qm);
+
+ /* OOO register set and check */
+ writel(ACC_MASTER_GLOBAL_CTRL_SHUTDOWN,
+ qm->io_base + ACC_MASTER_GLOBAL_CTRL);
+
+ /* If bus lock, reset chip */
+ ret = readl_relaxed_poll_timeout(qm->io_base + ACC_MASTER_TRANS_RETURN,
+ val,
+ (val == ACC_MASTER_TRANS_RETURN_RW),
+ POLL_PERIOD, POLL_TIMEOUT);
+ if (ret) {
+ pci_emerg(pdev, "Bus lock! Please reset system.\n");
+ return ret;
+ }
+
+ ret = qm_set_pf_mse(qm, false);
+ if (ret) {
+ pci_err(pdev, "Fails to disable pf MSE bit.\n");
+ return ret;
+ }
+
+ /* The reset related sub-control registers are not in PCI BAR */
+ if (ACPI_HANDLE(&pdev->dev)) {
+ unsigned long long value = 0;
+ acpi_status s;
+
+ s = acpi_evaluate_integer(ACPI_HANDLE(&pdev->dev),
+ qm->err_ini->err_info.acpi_rst,
+ NULL, &value);
+ if (ACPI_FAILURE(s)) {
+ pci_err(pdev, "NO controller reset method!\n");
+ return -EIO;
+ }
+
+ if (value) {
+ pci_err(pdev, "Reset step %llu failed!\n", value);
+ return -EIO;
+ }
+ } else {
+ pci_err(pdev, "No reset method!\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int qm_vf_reset_done(struct hisi_qm *qm)
+{
+ struct hisi_qm_list *qm_list = qm->qm_list;
+ struct pci_dev *pdev = qm->pdev;
+ struct pci_dev *virtfn;
+ struct hisi_qm *vf_qm;
+ int ret = 0;
+
+ mutex_lock(&qm_list->lock);
+ list_for_each_entry(vf_qm, &qm_list->list, list) {
+ virtfn = vf_qm->pdev;
+ if (virtfn == pdev)
+ continue;
+
+ if (pci_physfn(virtfn) == pdev) {
+ ret = qm_restart(vf_qm);
+ if (ret)
+ goto restart_fail;
+ }
+ }
+
+restart_fail:
+ mutex_unlock(&qm_list->lock);
+ return ret;
+}
+
+static int qm_get_dev_err_status(struct hisi_qm *qm)
+{
+
+ return(qm->err_ini->get_dev_hw_err_status(qm) &
+ qm->err_ini->err_info.ecc_2bits_mask);
+}
+
+static int qm_dev_hw_init(struct hisi_qm *qm)
+{
+ return qm->err_ini->hw_init(qm);
+}
+
+static void qm_restart_prepare(struct hisi_qm *qm)
+{
+ u32 value;
+
+ if (!qm->err_status.is_qm_ecc_mbit &&
+ !qm->err_status.is_dev_ecc_mbit)
+ return;
+
+ /* temporarily close the OOO port used for PEH to write out MSI */
+ value = readl(qm->io_base + ACC_AM_CFG_PORT_WR_EN);
+ writel(value & ~qm->err_ini->err_info.msi_wr_port,
+ qm->io_base + ACC_AM_CFG_PORT_WR_EN);
+
+ /* clear dev ecc 2bit error source if having */
+ value = qm_get_dev_err_status(qm);
+ if (value && qm->err_ini->clear_dev_hw_err_status)
+ qm->err_ini->clear_dev_hw_err_status(qm, value);
+
+ /* clear QM ecc mbit error source */
+ writel(QM_ECC_MBIT, qm->io_base + QM_ABNORMAL_INT_SOURCE);
+
+ /* clear AM Reorder Buffer ecc mbit source */
+ writel(ACC_ROB_ECC_ERR_MULTPL, qm->io_base + ACC_AM_ROB_ECC_INT_STS);
+
+ if (qm->err_ini->open_axi_master_ooo)
+ qm->err_ini->open_axi_master_ooo(qm);
+}
+
+static void qm_restart_done(struct hisi_qm *qm)
+{
+ u32 value;
+
+ if (!qm->err_status.is_qm_ecc_mbit &&
+ !qm->err_status.is_dev_ecc_mbit)
+ return;
+
+ /* open the OOO port for PEH to write out MSI */
+ value = readl(qm->io_base + ACC_AM_CFG_PORT_WR_EN);
+ value |= qm->err_ini->err_info.msi_wr_port;
+ writel(value, qm->io_base + ACC_AM_CFG_PORT_WR_EN);
+
+ qm->err_status.is_qm_ecc_mbit = false;
+ qm->err_status.is_dev_ecc_mbit = false;
+}
+
+static int qm_controller_reset_done(struct hisi_qm *qm)
+{
+ struct pci_dev *pdev = qm->pdev;
+ int ret;
+
+ ret = qm_set_msi(qm, true);
+ if (ret) {
+ pci_err(pdev, "Fails to enable PEH MSI bit!\n");
+ return ret;
+ }
+
+ ret = qm_set_pf_mse(qm, true);
+ if (ret) {
+ pci_err(pdev, "Fails to enable pf MSE bit!\n");
+ return ret;
+ }
+
+ if (qm->vfs_num) {
+ ret = qm_set_vf_mse(qm, true);
+ if (ret) {
+ pci_err(pdev, "Fails to enable vf MSE bit!\n");
+ return ret;
+ }
+ }
+
+ ret = qm_dev_hw_init(qm);
+ if (ret) {
+ pci_err(pdev, "Failed to init device\n");
+ return ret;
+ }
+
+ qm_restart_prepare(qm);
+
+ ret = qm_restart(qm);
+ if (ret) {
+ pci_err(pdev, "Failed to start QM!\n");
+ return ret;
+ }
+
+ if (qm->vfs_num) {
+ ret = qm_vf_q_assign(qm, qm->vfs_num);
+ if (ret) {
+ pci_err(pdev, "Failed to assign queue!\n");
+ return ret;
+ }
+ }
+
+ ret = qm_vf_reset_done(qm);
+ if (ret) {
+ pci_err(pdev, "Failed to start VFs!\n");
+ return -EPERM;
+ }
+
+ hisi_qm_dev_err_init(qm);
+ qm_restart_done(qm);
+
+ clear_bit(QM_DEV_RESET_FLAG, &qm->reset_flag);
+
+ return 0;
+}
+
+int qm_controller_reset(struct hisi_qm *qm)
+{
+ struct pci_dev *pdev = qm->pdev;
+ int ret;
+
+ pci_info(pdev, "Controller resetting...\n");
+
+ ret = qm_controller_reset_prepare(qm);
+ if (ret)
+ return ret;
+
+ ret = qm_soft_reset(qm);
+ if (ret) {
+ pci_err(pdev, "Controller reset failed (%d)\n", ret);
+ return ret;
+ }
+
+ ret = qm_controller_reset_done(qm);
+ if (ret)
+ return ret;
+
+ pci_info(pdev, "Controller reset complete\n");
+
+ return 0;
+}
+
+/**
+ * hisi_qm_dev_slot_reset() - slot reset
+ * @pdev: the PCIe device
+ *
+ * This function offers QM relate PCIe device reset interface. Drivers which
+ * use QM can use this function as slot_reset in its struct pci_error_handlers.
+ */
+pci_ers_result_t hisi_qm_dev_slot_reset(struct pci_dev *pdev)
+{
+ struct hisi_qm *qm = pci_get_drvdata(pdev);
+ int ret;
+
+ if (pdev->is_virtfn)
+ return PCI_ERS_RESULT_RECOVERED;
+
+ pci_aer_clear_nonfatal_status(pdev);
+
+ /* reset pcie device controller */
+ ret = qm_controller_reset(qm);
+ if (ret) {
+ pci_err(pdev, "Controller reset failed (%d)\n", ret);
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+
+ return PCI_ERS_RESULT_RECOVERED;
+}
+EXPORT_SYMBOL_GPL(hisi_qm_dev_slot_reset);
+
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Zhou Wang <wangzhou1@hisilicon.com>");
MODULE_DESCRIPTION("HiSilicon Accelerator queue manager driver");
projects / linux.git / commitdiff