serial: exar: Revert "serial: exar: Add support for Sealevel 7xxxC serial cards"

Hardware ID of Sealevel 7xxxC cards changed prior to release.
This has rendered 14ee78d5932a redundant.

This reverts commit 14ee78d5932afeb710c8305196a676a715bfdea8.

Signed-off-by: Matthew Howell <matthew.howell@sealevel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/8ffa2f583ff142c3b0eb6cf51a7c9cef5dbfd320.camel@sealevel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index aadcce3bb001941f2b01d481e540a6a0dfadcbc0..a18fc8f01a41eb1c679cffb92c3cc3f4952f1bb2 100644 (file)
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -46,12 +46,6 @@
 #define PCI_SUBDEVICE_ID_USR_2980              0x0128
 #define PCI_SUBDEVICE_ID_USR_2981              0x0129
 
-#define PCI_DEVICE_ID_SEALEVEL_710xC           0x1001
-#define PCI_DEVICE_ID_SEALEVEL_720xC           0x1002
-#define PCI_DEVICE_ID_SEALEVEL_740xC           0x1004
-#define PCI_DEVICE_ID_SEALEVEL_780xC           0x1008
-#define PCI_DEVICE_ID_SEALEVEL_716xC           0x1010
-
 #define UART_EXAR_INT0         0x80
 #define UART_EXAR_8XMODE       0x88    /* 8X sampling rate select */
 #define UART_EXAR_SLEEP                0x8b    /* Sleep mode */
@@ -651,8 +645,6 @@ exar_pci_probe(struct pci_dev *pcidev, const struct pci_device_id *ent)
                nr_ports = BIT(((pcidev->device & 0x38) >> 3) - 1);
        else if (board->num_ports)
                nr_ports = board->num_ports;
-       else if (pcidev->vendor == PCI_VENDOR_ID_SEALEVEL)
-               nr_ports = pcidev->device & 0xff;
        else
                nr_ports = pcidev->device & 0x0f;
 
@@ -892,12 +884,6 @@ static const struct pci_device_id exar_pci_tbl[] = {
        EXAR_DEVICE(COMMTECH, 4224PCI335, pbn_fastcom335_4),
        EXAR_DEVICE(COMMTECH, 2324PCI335, pbn_fastcom335_4),
        EXAR_DEVICE(COMMTECH, 2328PCI335, pbn_fastcom335_8),
-
-       EXAR_DEVICE(SEALEVEL, 710xC, pbn_exar_XR17V35x),
-       EXAR_DEVICE(SEALEVEL, 720xC, pbn_exar_XR17V35x),
-       EXAR_DEVICE(SEALEVEL, 740xC, pbn_exar_XR17V35x),
-       EXAR_DEVICE(SEALEVEL, 780xC, pbn_exar_XR17V35x),
-       EXAR_DEVICE(SEALEVEL, 716xC, pbn_exar_XR17V35x),
        { 0, }
 };
 MODULE_DEVICE_TABLE(pci, exar_pci_tbl);