pinctrl: qcom: sc8180x: add ACPI probe support

It adds ACPI probe support for pinctrl-sc8180x driver.  We have one
problem with ACPI table, i.e. GIO0 (TLMM) block has one single memory
resource to cover 3 tiles defined by SC8180X.  To follow the hardware
layout of 3 tiles which is already supported DT probe, it adds one
function to replace the original single memory resource with 3 named
ones for tiles.  With that, We can map memory for ACPI in the same way
as DT.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20210311024102.15450-1-shawn.guo@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
index 6853a896c47667675aa55633b29d1329c45251de..9f0218c4f9b321ce378ba897ba7679d5eb908aa1 100644 (file)
--- a/drivers/pinctrl/qcom/Kconfig
+++ b/drivers/pinctrl/qcom/Kconfig
@@ -222,7 +222,7 @@ config PINCTRL_SC7280
 
 config PINCTRL_SC8180X
        tristate "Qualcomm Technologies Inc SC8180x pin controller driver"
-       depends on GPIOLIB && OF
+       depends on GPIOLIB && (OF || ACPI)
        select PINCTRL_MSM
        help
          This is the pinctrl, pinmux, pinconf and gpiolib driver for the

diff --git a/drivers/pinctrl/qcom/pinctrl-sc8180x.c b/drivers/pinctrl/qcom/pinctrl-sc8180x.c
index b765bf6675748e30e8a16885609753675f76dacc..0d9654b4ab60ba3bc6a11b18c71710aaa7a02442 100644 (file)
--- a/drivers/pinctrl/qcom/pinctrl-sc8180x.c
+++ b/drivers/pinctrl/qcom/pinctrl-sc8180x.c
@@ -23,6 +23,21 @@ enum {
        WEST
 };
 
+/*
+ * ACPI DSDT has one single memory resource for TLMM.  The offsets below are
+ * used to locate different tiles for ACPI probe.
+ */
+struct tile_info {
+       u32 offset;
+       u32 size;
+};
+
+static const struct tile_info sc8180x_tile_info[] = {
+       { 0x00d00000, 0x00300000, },
+       { 0x00500000, 0x00700000, },
+       { 0x00100000, 0x00300000, },
+};
+
 #define FUNCTION(fname)                                        \
        [msm_mux_##fname] = {                           \
                .name = #fname,                         \
@@ -1557,6 +1572,13 @@ static const struct msm_pingroup sc8180x_groups[] = {
        [193] = SDC_QDSD_PINGROUP(sdc2_data, 0x4b2000, 9, 0),
 };
 
+static const int sc8180x_acpi_reserved_gpios[] = {
+       0, 1, 2, 3,
+       47, 48, 49, 50,
+       126, 127, 128, 129,
+       -1 /* terminator */
+};
+
 static const struct msm_gpio_wakeirq_map sc8180x_pdc_map[] = {
        { 3, 31 }, { 5, 32 }, { 8, 33 }, { 9, 34 }, { 10, 100 }, { 12, 104 },
        { 24, 37 }, { 26, 38 }, { 27, 41 }, { 28, 42 }, { 30, 39 }, { 36, 43 },
@@ -1588,13 +1610,109 @@ static struct msm_pinctrl_soc_data sc8180x_pinctrl = {
        .nwakeirq_map = ARRAY_SIZE(sc8180x_pdc_map),
 };
 
+static const struct msm_pinctrl_soc_data sc8180x_acpi_pinctrl = {
+       .tiles = sc8180x_tiles,
+       .ntiles = ARRAY_SIZE(sc8180x_tiles),
+       .pins = sc8180x_pins,
+       .npins = ARRAY_SIZE(sc8180x_pins),
+       .groups = sc8180x_groups,
+       .ngroups = ARRAY_SIZE(sc8180x_groups),
+       .reserved_gpios = sc8180x_acpi_reserved_gpios,
+       .ngpios = 190,
+};
+
+/*
+ * ACPI DSDT has one single memory resource for TLMM, which voilates the
+ * hardware layout of 3 sepearte tiles.  Let's split the memory resource into
+ * 3 named ones, so that msm_pinctrl_probe() can map memory for ACPI in the
+ * same way as for DT probe.
+ */
+static int sc8180x_pinctrl_add_tile_resources(struct platform_device *pdev)
+{
+       int nres_num = pdev->num_resources + ARRAY_SIZE(sc8180x_tiles) - 1;
+       struct resource *mres, *nres, *res;
+       int i, ret;
+
+       /*
+        * DT already has tiles defined properly, so nothing needs to be done
+        * for DT probe.
+        */
+       if (pdev->dev.of_node)
+               return 0;
+
+       /* Allocate for new resources */
+       nres = devm_kzalloc(&pdev->dev, sizeof(*nres) * nres_num, GFP_KERNEL);
+       if (!nres)
+               return -ENOMEM;
+
+       res = nres;
+
+       for (i = 0; i < pdev->num_resources; i++) {
+               struct resource *r = &pdev->resource[i];
+
+               /* Save memory resource and copy others */
+               if (resource_type(r) == IORESOURCE_MEM)
+                       mres = r;
+               else
+                       *res++ = *r;
+       }
+
+       /* Append tile memory resources */
+       for (i = 0; i < ARRAY_SIZE(sc8180x_tiles); i++, res++) {
+               const struct tile_info *info = &sc8180x_tile_info[i];
+
+               res->start = mres->start + info->offset;
+               res->end = mres->start + info->offset + info->size - 1;
+               res->flags = mres->flags;
+               res->name = sc8180x_tiles[i];
+
+               /* Add new MEM to resource tree */
+               insert_resource(mres->parent, res);
+       }
+
+       /* Remove old MEM from resource tree */
+       remove_resource(mres);
+
+       /* Free old resources and install new ones */
+       ret = platform_device_add_resources(pdev, nres, nres_num);
+       if (ret) {
+               dev_err(&pdev->dev, "failed to add new resources: %d\n", ret);
+               return ret;
+       }
+
+       return 0;
+}
+
 static int sc8180x_pinctrl_probe(struct platform_device *pdev)
 {
-       return msm_pinctrl_probe(pdev, &sc8180x_pinctrl);
+       const struct msm_pinctrl_soc_data *soc_data;
+       int ret;
+
+       soc_data = device_get_match_data(&pdev->dev);
+       if (!soc_data)
+               return -EINVAL;
+
+       ret = sc8180x_pinctrl_add_tile_resources(pdev);
+       if (ret)
+               return ret;
+
+       return msm_pinctrl_probe(pdev, soc_data);
 }
 
+static const struct acpi_device_id sc8180x_pinctrl_acpi_match[] = {
+       {
+               .id = "QCOM040D",
+               .driver_data = (kernel_ulong_t) &sc8180x_acpi_pinctrl,
+       },
+       { }
+};
+MODULE_DEVICE_TABLE(acpi, sc8180x_pinctrl_acpi_match);
+
 static const struct of_device_id sc8180x_pinctrl_of_match[] = {
-       { .compatible = "qcom,sc8180x-tlmm", },
+       {
+               .compatible = "qcom,sc8180x-tlmm",
+               .data = &sc8180x_pinctrl,
+       },
        { },
 };
 MODULE_DEVICE_TABLE(of, sc8180x_pinctrl_of_match);
@@ -1603,6 +1721,7 @@ static struct platform_driver sc8180x_pinctrl_driver = {
        .driver = {
                .name = "sc8180x-pinctrl",
                .of_match_table = sc8180x_pinctrl_of_match,
+               .acpi_match_table = sc8180x_pinctrl_acpi_match,
        },
        .probe = sc8180x_pinctrl_probe,
        .remove = msm_pinctrl_remove,