arm64: dts: ti: k3-am62: Enable EPWM nodes at the board level

EPWM nodes defined in the top-level AM62x SoC dtsi files are incomplete
and will not be functional unless they are extended with pinmux
information.

As the pinmux is only known at the board integration level, these
nodes should only be enabled when provided with this information.

Disable the EPWM nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.

Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20221018211533.21335-5-afd@ti.com

diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index 83ac2e45998dfaa7fef262945eea730904e3fba7..a0d24faa6833a758bf8f0c24806083b15d6ed794 100644 (file)
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -612,6 +612,7 @@
                power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>;
                clocks = <&epwm_tbclk 0>, <&k3_clks 86 0>;
                clock-names = "tbclk", "fck";
+               status = "disabled";
        };
 
        epwm1: pwm@23010000 {
@@ -621,6 +622,7 @@
                power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>;
                clocks = <&epwm_tbclk 1>, <&k3_clks 87 0>;
                clock-names = "tbclk", "fck";
+               status = "disabled";
        };
 
        epwm2: pwm@23020000 {
@@ -630,5 +632,6 @@
                power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>;
                clocks = <&epwm_tbclk 2>, <&k3_clks 88 0>;
                clock-names = "tbclk", "fck";
+               status = "disabled";
        };
 };

diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
index c280d6c0041205b292b56c3802702329dbcb8cc3..4086d61807ab55fb9065b88b883b037e88b702fa 100644 (file)
--- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
@@ -465,15 +465,3 @@
 &main_mcan0 {
        status = "disabled";
 };
-
-&epwm0 {
-       status = "disabled";
-};
-
-&epwm1 {
-       status = "disabled";
-};
-
-&epwm2 {
-       status = "disabled";
-};