ARM: dts: am335x-sl50: fix label names for all LEDs

Fix the label for all LEDs, we made a mistake setting the label names on
all LEDs, where says green should say red, and viceversa, where says red
should be green.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts
index 0268480003f475121e1f033e030ce819e0749290..442eccc3b46673cf2abbf5027be04f3fc36c8827 100644 (file)
--- a/arch/arm/boot/dts/am335x-sl50.dts
+++ b/arch/arm/boot/dts/am335x-sl50.dts
@@ -36,25 +36,25 @@
                pinctrl-0 = <&led_pins>;
 
                led0 {
-                       label = "sl50:green:usr0";
+                       label = "sl50:red:usr0";
                        gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
                        default-state = "off";
                };
 
                led1 {
-                       label = "sl50:red:usr1";
+                       label = "sl50:green:usr1";
                        gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
                        default-state = "off";
                };
 
                led2 {
-                       label = "sl50:green:usr2";
+                       label = "sl50:red:usr2";
                        gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
                        default-state = "off";
                };
 
                led3 {
-                       label = "sl50:red:usr3";
+                       label = "sl50:green:usr3";
                        gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
                        default-state = "off";
                };
@@ -433,6 +433,12 @@
                        /* PDI Bus - Battery system */
                        AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7)       /* nBattReset  gpmc_a0.gpio1_16 */
                        AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE7)       /* BattPDIData gpmc_ad15.gpio1_15 */
+                       /* FPGA */
+                       AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE7)       /* FPGA_DONE - gpmc_ad8.gpio0_22 */
+                       AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7)       /* FPGA_NRST - gpmc_a0.gpio1_16 */
+                       AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* FPGA_RUN - gpmc_a1.gpio1_17 */
+                       AM33XX_IOPAD(0x864, PIN_INPUT_PULLUP | MUX_MODE7)       /* ENFPGA - gpmc_a9.gpio1_25 */
+                       AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* FPGA_PROGRAM - gpmc_a10.gpio1_26 */
                >;
        };
 };