chosen { };
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0>;
- };
-
clocks {
xo_board: xo_board {
compatible = "fixed-clock";
};
};
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0>;
+ };
+
pmu {
compatible = "arm,cortex-a7-pmu";
interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
reg = <0xf9011000 0x1000>;
};
+ timer@f9020000 {
+ compatible = "arm,armv7-timer-mem";
+ reg = <0xf9020000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ frame@f9021000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf9021000 0x1000>,
+ <0xf9022000 0x1000>;
+ };
+
+ frame@f9023000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf9023000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f9024000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf9024000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f9025000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf9025000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f9026000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf9026000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f9027000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf9027000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f9028000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf9028000 0x1000>;
+ status = "disabled";
+ };
+ };
+
sdhc_1: mmc@f9824900 {
compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
status = "disabled";
};
- sdhc_2: mmc@f98a4900 {
+ sdhc_3: mmc@f9864900 {
compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
- reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
+ reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
reg-names = "hc", "core";
- interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
- clocks = <&gcc GCC_SDCC2_AHB_CLK>,
- <&gcc GCC_SDCC2_APPS_CLK>,
+ clocks = <&gcc GCC_SDCC3_AHB_CLK>,
+ <&gcc GCC_SDCC3_APPS_CLK>,
<&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "iface", "core", "xo";
pinctrl-names = "default";
- pinctrl-0 = <&sdhc2_default_state>;
+ pinctrl-0 = <&sdhc3_default_state>;
status = "disabled";
};
- sdhc_3: mmc@f9864900 {
+ sdhc_2: mmc@f98a4900 {
compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
- reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
+ reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
reg-names = "hc", "core";
- interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
- clocks = <&gcc GCC_SDCC3_AHB_CLK>,
- <&gcc GCC_SDCC3_APPS_CLK>,
+ clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+ <&gcc GCC_SDCC2_APPS_CLK>,
<&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "iface", "core", "xo";
pinctrl-names = "default";
- pinctrl-0 = <&sdhc3_default_state>;
+ pinctrl-0 = <&sdhc2_default_state>;
status = "disabled";
};
};
blsp1_i2c1: i2c@f9923000 {
- status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9923000 0x1000>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&blsp1_i2c1_pins>;
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
};
blsp1_i2c2: i2c@f9924000 {
- status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9924000 0x1000>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&blsp1_i2c2_pins>;
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
};
blsp1_i2c3: i2c@f9925000 {
- status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9925000 0x1000>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&blsp1_i2c3_pins>;
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
};
blsp1_i2c4: i2c@f9926000 {
- status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9926000 0x1000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&blsp1_i2c4_pins>;
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
};
blsp1_i2c5: i2c@f9927000 {
- status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9927000 0x1000>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&blsp1_i2c5_pins>;
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
};
blsp1_i2c6: i2c@f9928000 {
status = "disabled";
};
- cci: cci@fda0c000 {
- compatible = "qcom,msm8226-cci";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0xfda0c000 0x1000>;
- interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
- clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
- <&mmcc CAMSS_CCI_CCI_AHB_CLK>,
- <&mmcc CAMSS_CCI_CCI_CLK>;
- clock-names = "camss_top_ahb",
- "cci_ahb",
- "cci";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&cci_default>;
- pinctrl-1 = <&cci_sleep>;
-
- status = "disabled";
-
- cci_i2c0: i2c-bus@0 {
- reg = <0>;
- clock-frequency = <400000>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-
usb: usb@f9a55000 {
compatible = "qcom,ci-hdrc";
reg = <0xf9a55000 0x200>,
};
};
+ rng@f9bff000 {
+ compatible = "qcom,prng";
+ reg = <0xf9bff000 0x200>;
+ clocks = <&gcc GCC_PRNG_AHB_CLK>;
+ clock-names = "core";
+ };
+
+ sram@fc190000 {
+ compatible = "qcom,msm8226-rpm-stats";
+ reg = <0xfc190000 0x10000>;
+ };
+
gcc: clock-controller@fc400000 {
compatible = "qcom,gcc-msm8226";
reg = <0xfc400000 0x4000>;
"sleep_clk";
};
- mmcc: clock-controller@fd8c0000 {
- compatible = "qcom,mmcc-msm8226";
- reg = <0xfd8c0000 0x6000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
-
- clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
- <&gcc GCC_MMSS_GPLL0_CLK_SRC>,
- <&gcc GPLL0_VOTE>,
- <&gcc GPLL1_VOTE>,
- <&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
- <&mdss_dsi0_phy 1>,
- <&mdss_dsi0_phy 0>;
- clock-names = "xo",
- "mmss_gpll0_vote",
- "gpll0_vote",
- "gpll1_vote",
- "gfx3d_clk_src",
- "dsi0pll",
- "dsi0pllbyte";
- };
+ rpm_msg_ram: sram@fc428000 {
+ compatible = "qcom,rpm-msg-ram";
+ reg = <0xfc428000 0x4000>;
- tlmm: pinctrl@fd510000 {
- compatible = "qcom,msm8226-pinctrl";
- reg = <0xfd510000 0x4000>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&tlmm 0 0 117>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xfc428000 0x4000>;
- blsp1_i2c1_pins: blsp1-i2c1-state {
- pins = "gpio2", "gpio3";
- function = "blsp_i2c1";
- drive-strength = <2>;
- bias-disable;
+ apss_master_stats: sram@150 {
+ reg = <0x150 0x14>;
};
- blsp1_i2c2_pins: blsp1-i2c2-state {
- pins = "gpio6", "gpio7";
- function = "blsp_i2c2";
- drive-strength = <2>;
- bias-disable;
+ mpss_master_stats: sram@b50 {
+ reg = <0xb50 0x14>;
};
- blsp1_i2c3_pins: blsp1-i2c3-state {
- pins = "gpio10", "gpio11";
- function = "blsp_i2c3";
- drive-strength = <2>;
- bias-disable;
+ lpss_master_stats: sram@1550 {
+ reg = <0x1550 0x14>;
};
- blsp1_i2c4_pins: blsp1-i2c4-state {
- pins = "gpio14", "gpio15";
- function = "blsp_i2c4";
- drive-strength = <2>;
- bias-disable;
+ pronto_master_stats: sram@1f50 {
+ reg = <0x1f50 0x14>;
};
+ };
- blsp1_i2c5_pins: blsp1-i2c5-state {
- pins = "gpio18", "gpio19";
- function = "blsp_i2c5";
- drive-strength = <2>;
- bias-disable;
- };
+ tsens: thermal-sensor@fc4a9000 {
+ compatible = "qcom,msm8226-tsens", "qcom,tsens-v0_1";
+ reg = <0xfc4a9000 0x1000>, /* TM */
+ <0xfc4a8000 0x1000>; /* SROT */
+ nvmem-cells = <&tsens_mode>,
+ <&tsens_base1>, <&tsens_base2>,
+ <&tsens_s0_p1>, <&tsens_s0_p2>,
+ <&tsens_s1_p1>, <&tsens_s1_p2>,
+ <&tsens_s2_p1>, <&tsens_s2_p2>,
+ <&tsens_s3_p1>, <&tsens_s3_p2>,
+ <&tsens_s4_p1>, <&tsens_s4_p2>,
+ <&tsens_s5_p1>, <&tsens_s5_p2>,
+ <&tsens_s6_p1>, <&tsens_s6_p2>;
+ nvmem-cell-names = "mode",
+ "base1", "base2",
+ "s0_p1", "s0_p2",
+ "s1_p1", "s1_p2",
+ "s2_p1", "s2_p2",
+ "s3_p1", "s3_p2",
+ "s4_p1", "s4_p2",
+ "s5_p1", "s5_p2",
+ "s6_p1", "s6_p2";
+ #qcom,sensors = <6>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow";
+ #thermal-sensor-cells = <1>;
+ };
- blsp1_i2c6_pins: blsp1-i2c6-state {
- pins = "gpio22", "gpio23";
- function = "blsp_i2c6";
- drive-strength = <2>;
- bias-disable;
- };
-
- cci_default: cci-default-state {
- pins = "gpio29", "gpio30";
- function = "cci_i2c0";
-
- drive-strength = <2>;
- bias-disable;
- };
-
- cci_sleep: cci-sleep-state {
- pins = "gpio29", "gpio30";
- function = "gpio";
-
- drive-strength = <2>;
- bias-disable;
- };
-
- sdhc1_default_state: sdhc1-default-state {
- clk-pins {
- pins = "sdc1_clk";
- drive-strength = <10>;
- bias-disable;
- };
-
- cmd-data-pins {
- pins = "sdc1_cmd", "sdc1_data";
- drive-strength = <10>;
- bias-pull-up;
- };
- };
-
- sdhc2_default_state: sdhc2-default-state {
- clk-pins {
- pins = "sdc2_clk";
- drive-strength = <10>;
- bias-disable;
- };
-
- cmd-data-pins {
- pins = "sdc2_cmd", "sdc2_data";
- drive-strength = <10>;
- bias-pull-up;
- };
- };
-
- sdhc3_default_state: sdhc3-default-state {
- clk-pins {
- pins = "gpio44";
- function = "sdc3";
- drive-strength = <8>;
- bias-disable;
- };
-
- cmd-pins {
- pins = "gpio43";
- function = "sdc3";
- drive-strength = <8>;
- bias-pull-up;
- };
-
- data-pins {
- pins = "gpio39", "gpio40", "gpio41", "gpio42";
- function = "sdc3";
- drive-strength = <8>;
- bias-pull-up;
- };
- };
- };
-
- tsens: thermal-sensor@fc4a9000 {
- compatible = "qcom,msm8226-tsens", "qcom,tsens-v0_1";
- reg = <0xfc4a9000 0x1000>, /* TM */
- <0xfc4a8000 0x1000>; /* SROT */
- nvmem-cells = <&tsens_mode>,
- <&tsens_base1>, <&tsens_base2>,
- <&tsens_s0_p1>, <&tsens_s0_p2>,
- <&tsens_s1_p1>, <&tsens_s1_p2>,
- <&tsens_s2_p1>, <&tsens_s2_p2>,
- <&tsens_s3_p1>, <&tsens_s3_p2>,
- <&tsens_s4_p1>, <&tsens_s4_p2>,
- <&tsens_s5_p1>, <&tsens_s5_p2>,
- <&tsens_s6_p1>, <&tsens_s6_p2>;
- nvmem-cell-names = "mode",
- "base1", "base2",
- "s0_p1", "s0_p2",
- "s1_p1", "s1_p2",
- "s2_p1", "s2_p2",
- "s3_p1", "s3_p2",
- "s4_p1", "s4_p2",
- "s5_p1", "s5_p2",
- "s6_p1", "s6_p2";
- #qcom,sensors = <6>;
- interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "uplow";
- #thermal-sensor-cells = <1>;
- };
-
- restart@fc4ab000 {
- compatible = "qcom,pshold";
- reg = <0xfc4ab000 0x4>;
- };
+ restart@fc4ab000 {
+ compatible = "qcom,pshold";
+ reg = <0xfc4ab000 0x4>;
+ };
qfprom: qfprom@fc4bc000 {
compatible = "qcom,msm8226-qfprom", "qcom,qfprom";
#interrupt-cells = <4>;
};
- rng@f9bff000 {
- compatible = "qcom,prng";
- reg = <0xf9bff000 0x200>;
- clocks = <&gcc GCC_PRNG_AHB_CLK>;
- clock-names = "core";
+ tcsr_mutex: hwlock@fd484000 {
+ compatible = "qcom,msm8226-tcsr-mutex", "qcom,tcsr-mutex";
+ reg = <0xfd484000 0x1000>;
+ #hwlock-cells = <1>;
};
- timer@f9020000 {
- compatible = "arm,armv7-timer-mem";
- reg = <0xf9020000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- frame@f9021000 {
- frame-number = <0>;
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf9021000 0x1000>,
- <0xf9022000 0x1000>;
- };
+ tlmm: pinctrl@fd510000 {
+ compatible = "qcom,msm8226-pinctrl";
+ reg = <0xfd510000 0x4000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 117>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
- frame@f9023000 {
- frame-number = <1>;
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf9023000 0x1000>;
- status = "disabled";
+ blsp1_i2c1_pins: blsp1-i2c1-state {
+ pins = "gpio2", "gpio3";
+ function = "blsp_i2c1";
+ drive-strength = <2>;
+ bias-disable;
};
- frame@f9024000 {
- frame-number = <2>;
- interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf9024000 0x1000>;
- status = "disabled";
+ blsp1_i2c2_pins: blsp1-i2c2-state {
+ pins = "gpio6", "gpio7";
+ function = "blsp_i2c2";
+ drive-strength = <2>;
+ bias-disable;
};
- frame@f9025000 {
- frame-number = <3>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf9025000 0x1000>;
- status = "disabled";
+ blsp1_i2c3_pins: blsp1-i2c3-state {
+ pins = "gpio10", "gpio11";
+ function = "blsp_i2c3";
+ drive-strength = <2>;
+ bias-disable;
};
- frame@f9026000 {
- frame-number = <4>;
- interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf9026000 0x1000>;
- status = "disabled";
+ blsp1_i2c4_pins: blsp1-i2c4-state {
+ pins = "gpio14", "gpio15";
+ function = "blsp_i2c4";
+ drive-strength = <2>;
+ bias-disable;
};
- frame@f9027000 {
- frame-number = <5>;
- interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf9027000 0x1000>;
- status = "disabled";
+ blsp1_i2c5_pins: blsp1-i2c5-state {
+ pins = "gpio18", "gpio19";
+ function = "blsp_i2c5";
+ drive-strength = <2>;
+ bias-disable;
};
- frame@f9028000 {
- frame-number = <6>;
- interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf9028000 0x1000>;
- status = "disabled";
+ blsp1_i2c6_pins: blsp1-i2c6-state {
+ pins = "gpio22", "gpio23";
+ function = "blsp_i2c6";
+ drive-strength = <2>;
+ bias-disable;
};
- };
- sram@fc190000 {
- compatible = "qcom,msm8226-rpm-stats";
- reg = <0xfc190000 0x10000>;
- };
-
- rpm_msg_ram: sram@fc428000 {
- compatible = "qcom,rpm-msg-ram";
- reg = <0xfc428000 0x4000>;
-
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0xfc428000 0x4000>;
-
- apss_master_stats: sram@150 {
- reg = <0x150 0x14>;
- };
+ cci_default: cci-default-state {
+ pins = "gpio29", "gpio30";
+ function = "cci_i2c0";
- mpss_master_stats: sram@b50 {
- reg = <0xb50 0x14>;
+ drive-strength = <2>;
+ bias-disable;
};
- lpss_master_stats: sram@1550 {
- reg = <0x1550 0x14>;
- };
+ cci_sleep: cci-sleep-state {
+ pins = "gpio29", "gpio30";
+ function = "gpio";
- pronto_master_stats: sram@1f50 {
- reg = <0x1f50 0x14>;
+ drive-strength = <2>;
+ bias-disable;
};
- };
-
- tcsr_mutex: hwlock@fd484000 {
- compatible = "qcom,msm8226-tcsr-mutex", "qcom,tcsr-mutex";
- reg = <0xfd484000 0x1000>;
- #hwlock-cells = <1>;
- };
-
- adsp: remoteproc@fe200000 {
- compatible = "qcom,msm8226-adsp-pil";
- reg = <0xfe200000 0x100>;
-
- interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
- power-domains = <&rpmpd MSM8226_VDDCX>;
- power-domain-names = "cx";
-
- clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
- clock-names = "xo";
-
- memory-region = <&adsp_region>;
-
- qcom,smem-states = <&adsp_smp2p_out 0>;
- qcom,smem-state-names = "stop";
-
- status = "disabled";
+ sdhc1_default_state: sdhc1-default-state {
+ clk-pins {
+ pins = "sdc1_clk";
+ drive-strength = <10>;
+ bias-disable;
+ };
- smd-edge {
- interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+ cmd-data-pins {
+ pins = "sdc1_cmd", "sdc1_data";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
- qcom,ipc = <&apcs 8 8>;
- qcom,smd-edge = <1>;
+ sdhc2_default_state: sdhc2-default-state {
+ clk-pins {
+ pins = "sdc2_clk";
+ drive-strength = <10>;
+ bias-disable;
+ };
- label = "lpass";
+ cmd-data-pins {
+ pins = "sdc2_cmd", "sdc2_data";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
};
- };
- sram@fdd00000 {
- compatible = "qcom,msm8226-ocmem";
- reg = <0xfdd00000 0x2000>,
- <0xfec00000 0x20000>;
- reg-names = "ctrl", "mem";
- ranges = <0 0xfec00000 0x20000>;
- clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>;
- clock-names = "core";
+ sdhc3_default_state: sdhc3-default-state {
+ clk-pins {
+ pins = "gpio44";
+ function = "sdc3";
+ drive-strength = <8>;
+ bias-disable;
+ };
- #address-cells = <1>;
- #size-cells = <1>;
+ cmd-pins {
+ pins = "gpio43";
+ function = "sdc3";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
- gmu_sram: gmu-sram@0 {
- reg = <0x0 0x20000>;
+ data-pins {
+ pins = "gpio39", "gpio40", "gpio41", "gpio42";
+ function = "sdc3";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
};
};
- sram@fe805000 {
- compatible = "qcom,msm8226-imem", "syscon", "simple-mfd";
- reg = <0xfe805000 0x1000>;
-
- reboot-mode {
- compatible = "syscon-reboot-mode";
- offset = <0x65c>;
+ mmcc: clock-controller@fd8c0000 {
+ compatible = "qcom,mmcc-msm8226";
+ reg = <0xfd8c0000 0x6000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
- mode-bootloader = <0x77665500>;
- mode-normal = <0x77665501>;
- mode-recovery = <0x77665502>;
- };
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+ <&gcc GCC_MMSS_GPLL0_CLK_SRC>,
+ <&gcc GPLL0_VOTE>,
+ <&gcc GPLL1_VOTE>,
+ <&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
+ <&mdss_dsi0_phy 1>,
+ <&mdss_dsi0_phy 0>;
+ clock-names = "xo",
+ "mmss_gpll0_vote",
+ "gpll0_vote",
+ "gpll1_vote",
+ "gfx3d_clk_src",
+ "dsi0pll",
+ "dsi0pllbyte";
};
mdss: display-subsystem@fd900000 {
};
};
+ cci: cci@fda0c000 {
+ compatible = "qcom,msm8226-cci";
+ reg = <0xfda0c000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+ <&mmcc CAMSS_CCI_CCI_AHB_CLK>,
+ <&mmcc CAMSS_CCI_CCI_CLK>;
+ clock-names = "camss_top_ahb",
+ "cci_ahb",
+ "cci";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cci_default>;
+ pinctrl-1 = <&cci_sleep>;
+
+ status = "disabled";
+
+ cci_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
gpu: adreno@fdb00000 {
compatible = "qcom,adreno-305.18", "qcom,adreno";
reg = <0xfdb00000 0x10000>;
};
};
};
+
+ sram@fdd00000 {
+ compatible = "qcom,msm8226-ocmem";
+ reg = <0xfdd00000 0x2000>,
+ <0xfec00000 0x20000>;
+ reg-names = "ctrl", "mem";
+ ranges = <0 0xfec00000 0x20000>;
+ clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>;
+ clock-names = "core";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ gmu_sram: gmu-sram@0 {
+ reg = <0x0 0x20000>;
+ };
+ };
+
+ adsp: remoteproc@fe200000 {
+ compatible = "qcom,msm8226-adsp-pil";
+ reg = <0xfe200000 0x100>;
+
+ interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+ power-domains = <&rpmpd MSM8226_VDDCX>;
+ power-domain-names = "cx";
+
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "xo";
+
+ memory-region = <&adsp_region>;
+
+ qcom,smem-states = <&adsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ smd-edge {
+ interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 8>;
+ qcom,smd-edge = <1>;
+
+ label = "lpass";
+ };
+ };
+
+ sram@fe805000 {
+ compatible = "qcom,msm8226-imem", "syscon", "simple-mfd";
+ reg = <0xfe805000 0x1000>;
+
+ reboot-mode {
+ compatible = "syscon-reboot-mode";
+ offset = <0x65c>;
+
+ mode-bootloader = <0x77665500>;
+ mode-normal = <0x77665501>;
+ mode-recovery = <0x77665502>;
+ };
+ };
};
thermal-zones {
projects / linux.git / commitdiff