+++ /dev/null
-.. SPDX-License-Identifier: GPL-2.0
-
-TM6000 cards list
-=================
-
-.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}|
-
-.. flat-table::
- :header-rows: 1
- :widths: 2 19 18
- :stub-columns: 0
-
- * - Card number
- - Card name
- - USB IDs
-
- * - 0
- - Unknown tm6000 video grabber
- -
-
- * - 1
- - Generic tm5600 board
- - 6000:0001
-
- * - 2
- - Generic tm6000 board
- -
-
- * - 3
- - Generic tm6010 board
- - 6000:0002
-
- * - 4
- - 10Moons UT 821
- -
-
- * - 5
- - 10Moons UT 330
- -
-
- * - 6
- - ADSTECH Dual TV USB
- - 06e1:f332
-
- * - 7
- - Freecom Hybrid Stick / Moka DVB-T Receiver Dual
- - 14aa:0620
-
- * - 8
- - ADSTECH Mini Dual TV USB
- - 06e1:b339
-
- * - 9
- - Hauppauge WinTV HVR-900H / WinTV USB2-Stick
- - 2040:6600, 2040:6601, 2040:6610, 2040:6611
-
- * - 10
- - Beholder Wander DVB-T/TV/FM USB2.0
- - 6000:dec0
-
- * - 11
- - Beholder Voyager TV/FM USB2.0
- - 6000:dec1
-
- * - 12
- - Terratec Cinergy Hybrid XE / Cinergy Hybrid-Stick
- - 0ccd:0086, 0ccd:00A5
-
- * - 13
- - Twinhan TU501(704D1)
- - 13d3:3240, 13d3:3241, 13d3:3243, 13d3:3264
-
- * - 14
- - Beholder Wander Lite DVB-T/TV/FM USB2.0
- - 6000:dec2
-
- * - 15
- - Beholder Voyager Lite TV/FM USB2.0
- - 6000:dec3
-
- * - 16
- - Terratec Grabster AV 150/250 MX
- - 0ccd:0079
s2250 Sensoray 2250/2251
s2255drv USB Sensoray 2255 video capture device
smsusb Siano SMS1xxx based MDTV receiver
-tm6000-alsa TV Master TM5600/6000/6010 audio
-tm6000-dvb DVB Support for tm6000 based TV cards
-tm6000 TV Master TM5600/6000/6010 driver
ttusb_dec Technotrend/Hauppauge USB DEC devices
usbtv USBTV007 video capture
uvcvideo USB Video Class (UVC)
au0828-cardlist
cx231xx-cardlist
em28xx-cardlist
- tm6000-cardlist
siano-cardlist
gspca-cardlist
F: Documentation/networking/device_drivers/ethernet/ti/tlan.rst
F: drivers/net/ethernet/ti/tlan.*
-TM6000 VIDEO4LINUX DRIVER
-M: Mauro Carvalho Chehab <mchehab@kernel.org>
-L: linux-media@vger.kernel.org
-S: Odd fixes
-W: https://linuxtv.org
-T: git git://linuxtv.org/media_tree.git
-F: Documentation/admin-guide/media/tm6000*
-F: drivers/staging/media/deprecated/tm6000/
-
TMIO/SDHI MMC DRIVER
M: Wolfram Sang <wsa+renesas@sang-engineering.com>
L: linux-mmc@vger.kernel.org
if STAGING_MEDIA_DEPRECATED
source "drivers/staging/media/deprecated/atmel/Kconfig"
source "drivers/staging/media/deprecated/saa7146/Kconfig"
-source "drivers/staging/media/deprecated/tm6000/Kconfig"
endif
endif
obj-$(CONFIG_VIDEO_SUNXI) += sunxi/
obj-$(CONFIG_VIDEO_TEGRA) += tegra-video/
obj-$(CONFIG_VIDEO_IPU3_IMGU) += ipu3/
-obj-$(CONFIG_VIDEO_TM6000) += deprecated/tm6000/
obj-y += deprecated/saa7146/
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0-only
-config VIDEO_TM6000
- tristate "TV Master TM5600/6000/6010 driver (DEPRECATED)"
- depends on VIDEO_DEV && I2C && INPUT && RC_CORE && USB
- select VIDEO_TUNER
- select MEDIA_TUNER_XC2028
- select MEDIA_TUNER_XC5000
- select VIDEOBUF_VMALLOC
- help
- Support for TM5600/TM6000/TM6010 USB Device
-
- Since these cards have no MPEG decoder onboard, they transmit
- only compressed MPEG data over the usb bus, so you need
- an external software decoder to watch TV on your computer.
-
- This driver is deprecated and is scheduled for removal by
- the beginning of 2023. See the TODO file for more information.
-
- Say Y if you own such a device and want to use it.
-
-config VIDEO_TM6000_ALSA
- tristate "TV Master TM5600/6000/6010 audio support"
- depends on VIDEO_TM6000 && SND
- select SND_PCM
- help
- This is a video4linux driver for direct (DMA) audio for
- TM5600/TM6000/TM6010 USB Devices.
-
- To compile this driver as a module, choose M here: the
- module will be called tm6000-alsa.
-
-config VIDEO_TM6000_DVB
- tristate "DVB Support for tm6000 based TV cards"
- depends on VIDEO_TM6000 && DVB_CORE && USB
- select DVB_ZL10353
- help
- This adds support for DVB cards based on the tm5600/tm6000 chip.
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0
-tm6000-y := tm6000-cards.o \
- tm6000-core.o \
- tm6000-i2c.o \
- tm6000-video.o \
- tm6000-stds.o \
- tm6000-input.o
-
-obj-$(CONFIG_VIDEO_TM6000) += tm6000.o
-obj-$(CONFIG_VIDEO_TM6000_ALSA) += tm6000-alsa.o
-obj-$(CONFIG_VIDEO_TM6000_DVB) += tm6000-dvb.o
-
-ccflags-y += -I $(srctree)/drivers/media/tuners
-ccflags-y += -I $(srctree)/drivers/media/dvb-frontends
+++ /dev/null
-This is one of the few drivers still not using the vb2
-framework, so this driver is now deprecated with the intent of
-removing it altogether by the beginning of 2023.
-
-In order to keep this driver it has to be converted to vb2.
-If someone is interested in doing this work, then contact the
-linux-media mailinglist (https://linuxtv.org/lists.php).
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-// Support for audio capture for tm5600/6000/6010
-// Copyright (c) 2007-2008 Mauro Carvalho Chehab <mchehab@kernel.org>
-//
-// Based on cx88-alsa.c
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/usb.h>
-#include <linux/slab.h>
-
-#include <linux/delay.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/control.h>
-#include <sound/initval.h>
-
-
-#include "tm6000.h"
-#include "tm6000-regs.h"
-
-#undef dprintk
-
-#define dprintk(level, fmt, arg...) do { \
- if (debug >= level) \
- printk(KERN_INFO "%s/1: " fmt, chip->core->name , ## arg); \
- } while (0)
-
-/****************************************************************************
- Module global static vars
- ****************************************************************************/
-
-static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
-
-static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
-
-module_param_array(enable, bool, NULL, 0444);
-MODULE_PARM_DESC(enable, "Enable tm6000x soundcard. default enabled.");
-
-module_param_array(index, int, NULL, 0444);
-MODULE_PARM_DESC(index, "Index value for tm6000x capture interface(s).");
-
-
-/****************************************************************************
- Module macros
- ****************************************************************************/
-
-MODULE_DESCRIPTION("ALSA driver module for tm5600/tm6000/tm6010 based TV cards");
-MODULE_AUTHOR("Mauro Carvalho Chehab");
-MODULE_LICENSE("GPL v2");
-static unsigned int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "enable debug messages");
-
-/****************************************************************************
- Module specific functions
- ****************************************************************************/
-
-/*
- * BOARD Specific: Sets audio DMA
- */
-
-static int _tm6000_start_audio_dma(struct snd_tm6000_card *chip)
-{
- struct tm6000_core *core = chip->core;
-
- dprintk(1, "Starting audio DMA\n");
-
- /* Enables audio */
- tm6000_set_reg_mask(core, TM6010_REQ07_RCC_ACTIVE_IF, 0x40, 0x40);
-
- tm6000_set_audio_bitrate(core, 48000);
-
- return 0;
-}
-
-/*
- * BOARD Specific: Resets audio DMA
- */
-static int _tm6000_stop_audio_dma(struct snd_tm6000_card *chip)
-{
- struct tm6000_core *core = chip->core;
-
- dprintk(1, "Stopping audio DMA\n");
-
- /* Disables audio */
- tm6000_set_reg_mask(core, TM6010_REQ07_RCC_ACTIVE_IF, 0x00, 0x40);
-
- return 0;
-}
-
-/****************************************************************************
- ALSA PCM Interface
- ****************************************************************************/
-
-/*
- * Digital hardware definition
- */
-#define DEFAULT_FIFO_SIZE 4096
-
-static const struct snd_pcm_hardware snd_tm6000_digital_hw = {
- .info = SNDRV_PCM_INFO_BATCH |
- SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID,
- .formats = SNDRV_PCM_FMTBIT_S16_LE,
-
- .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_KNOT,
- .rate_min = 48000,
- .rate_max = 48000,
- .channels_min = 2,
- .channels_max = 2,
- .period_bytes_min = 64,
- .period_bytes_max = 12544,
- .periods_min = 2,
- .periods_max = 98,
- .buffer_bytes_max = 62720 * 8,
-};
-
-/*
- * audio pcm capture open callback
- */
-static int snd_tm6000_pcm_open(struct snd_pcm_substream *substream)
-{
- struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream);
- struct snd_pcm_runtime *runtime = substream->runtime;
- int err;
-
- err = snd_pcm_hw_constraint_pow2(runtime, 0,
- SNDRV_PCM_HW_PARAM_PERIODS);
- if (err < 0)
- goto _error;
-
- chip->substream = substream;
-
- runtime->hw = snd_tm6000_digital_hw;
- snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
-
- return 0;
-_error:
- dprintk(1, "Error opening PCM!\n");
- return err;
-}
-
-/*
- * audio close callback
- */
-static int snd_tm6000_close(struct snd_pcm_substream *substream)
-{
- struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream);
- struct tm6000_core *core = chip->core;
-
- if (atomic_read(&core->stream_started) > 0) {
- atomic_set(&core->stream_started, 0);
- schedule_work(&core->wq_trigger);
- }
-
- return 0;
-}
-
-static int tm6000_fillbuf(struct tm6000_core *core, char *buf, int size)
-{
- struct snd_tm6000_card *chip = core->adev;
- struct snd_pcm_substream *substream = chip->substream;
- struct snd_pcm_runtime *runtime;
- int period_elapsed = 0;
- unsigned int stride, buf_pos;
- int length;
-
- if (atomic_read(&core->stream_started) == 0)
- return 0;
-
- if (!size || !substream) {
- dprintk(1, "substream was NULL\n");
- return -EINVAL;
- }
-
- runtime = substream->runtime;
- if (!runtime || !runtime->dma_area) {
- dprintk(1, "runtime was NULL\n");
- return -EINVAL;
- }
-
- buf_pos = chip->buf_pos;
- stride = runtime->frame_bits >> 3;
-
- if (stride == 0) {
- dprintk(1, "stride is zero\n");
- return -EINVAL;
- }
-
- length = size / stride;
- if (length == 0) {
- dprintk(1, "%s: length was zero\n", __func__);
- return -EINVAL;
- }
-
- dprintk(1, "Copying %d bytes at %p[%d] - buf size=%d x %d\n", size,
- runtime->dma_area, buf_pos,
- (unsigned int)runtime->buffer_size, stride);
-
- if (buf_pos + length >= runtime->buffer_size) {
- unsigned int cnt = runtime->buffer_size - buf_pos;
- memcpy(runtime->dma_area + buf_pos * stride, buf, cnt * stride);
- memcpy(runtime->dma_area, buf + cnt * stride,
- length * stride - cnt * stride);
- } else
- memcpy(runtime->dma_area + buf_pos * stride, buf,
- length * stride);
-
- snd_pcm_stream_lock(substream);
-
- chip->buf_pos += length;
- if (chip->buf_pos >= runtime->buffer_size)
- chip->buf_pos -= runtime->buffer_size;
-
- chip->period_pos += length;
- if (chip->period_pos >= runtime->period_size) {
- chip->period_pos -= runtime->period_size;
- period_elapsed = 1;
- }
-
- snd_pcm_stream_unlock(substream);
-
- if (period_elapsed)
- snd_pcm_period_elapsed(substream);
-
- return 0;
-}
-
-/*
- * prepare callback
- */
-static int snd_tm6000_prepare(struct snd_pcm_substream *substream)
-{
- struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream);
-
- chip->buf_pos = 0;
- chip->period_pos = 0;
-
- return 0;
-}
-
-
-/*
- * trigger callback
- */
-static void audio_trigger(struct work_struct *work)
-{
- struct tm6000_core *core = container_of(work, struct tm6000_core,
- wq_trigger);
- struct snd_tm6000_card *chip = core->adev;
-
- if (atomic_read(&core->stream_started)) {
- dprintk(1, "starting capture");
- _tm6000_start_audio_dma(chip);
- } else {
- dprintk(1, "stopping capture");
- _tm6000_stop_audio_dma(chip);
- }
-}
-
-static int snd_tm6000_card_trigger(struct snd_pcm_substream *substream, int cmd)
-{
- struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream);
- struct tm6000_core *core = chip->core;
- int err = 0;
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- case SNDRV_PCM_TRIGGER_RESUME:
- case SNDRV_PCM_TRIGGER_START:
- atomic_set(&core->stream_started, 1);
- break;
- case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- case SNDRV_PCM_TRIGGER_SUSPEND:
- case SNDRV_PCM_TRIGGER_STOP:
- atomic_set(&core->stream_started, 0);
- break;
- default:
- err = -EINVAL;
- break;
- }
- schedule_work(&core->wq_trigger);
-
- return err;
-}
-/*
- * pointer callback
- */
-static snd_pcm_uframes_t snd_tm6000_pointer(struct snd_pcm_substream *substream)
-{
- struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream);
-
- return chip->buf_pos;
-}
-
-/*
- * operators
- */
-static const struct snd_pcm_ops snd_tm6000_pcm_ops = {
- .open = snd_tm6000_pcm_open,
- .close = snd_tm6000_close,
- .prepare = snd_tm6000_prepare,
- .trigger = snd_tm6000_card_trigger,
- .pointer = snd_tm6000_pointer,
-};
-
-/*
- * create a PCM device
- */
-
-/* FIXME: Control interface - How to control volume/mute? */
-
-/****************************************************************************
- Basic Flow for Sound Devices
- ****************************************************************************/
-
-/*
- * Alsa Constructor - Component probe
- */
-static int tm6000_audio_init(struct tm6000_core *dev)
-{
- struct snd_card *card;
- struct snd_tm6000_card *chip;
- int rc;
- static int devnr;
- char component[14];
- struct snd_pcm *pcm;
-
- if (!dev)
- return 0;
-
- if (devnr >= SNDRV_CARDS)
- return -ENODEV;
-
- if (!enable[devnr])
- return -ENOENT;
-
- rc = snd_card_new(&dev->udev->dev, index[devnr], "tm6000",
- THIS_MODULE, 0, &card);
- if (rc < 0) {
- snd_printk(KERN_ERR "cannot create card instance %d\n", devnr);
- return rc;
- }
- strscpy(card->driver, "tm6000-alsa", sizeof(card->driver));
- strscpy(card->shortname, "TM5600/60x0", sizeof(card->shortname));
- sprintf(card->longname, "TM5600/60x0 Audio at bus %d device %d",
- dev->udev->bus->busnum, dev->udev->devnum);
-
- sprintf(component, "USB%04x:%04x",
- le16_to_cpu(dev->udev->descriptor.idVendor),
- le16_to_cpu(dev->udev->descriptor.idProduct));
- snd_component_add(card, component);
-
- chip = kzalloc(sizeof(struct snd_tm6000_card), GFP_KERNEL);
- if (!chip) {
- rc = -ENOMEM;
- goto error;
- }
-
- chip->core = dev;
- chip->card = card;
- dev->adev = chip;
- spin_lock_init(&chip->reg_lock);
-
- rc = snd_pcm_new(card, "TM6000 Audio", 0, 0, 1, &pcm);
- if (rc < 0)
- goto error_chip;
-
- pcm->info_flags = 0;
- pcm->private_data = chip;
- strscpy(pcm->name, "Trident TM5600/60x0", sizeof(pcm->name));
-
- snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_tm6000_pcm_ops);
- snd_pcm_set_managed_buffer_all(pcm, SNDRV_DMA_TYPE_VMALLOC, NULL, 0, 0);
-
- INIT_WORK(&dev->wq_trigger, audio_trigger);
- rc = snd_card_register(card);
- if (rc < 0)
- goto error_chip;
-
- dprintk(1, "Registered audio driver for %s\n", card->longname);
-
- return 0;
-
-error_chip:
- kfree(chip);
- dev->adev = NULL;
-error:
- snd_card_free(card);
- return rc;
-}
-
-static int tm6000_audio_fini(struct tm6000_core *dev)
-{
- struct snd_tm6000_card *chip;
-
- if (!dev)
- return 0;
- chip = dev->adev;
-
- if (!chip)
- return 0;
-
- if (!chip->card)
- return 0;
-
- snd_card_free(chip->card);
- chip->card = NULL;
- kfree(chip);
- dev->adev = NULL;
-
- return 0;
-}
-
-static struct tm6000_ops audio_ops = {
- .type = TM6000_AUDIO,
- .name = "TM6000 Audio Extension",
- .init = tm6000_audio_init,
- .fini = tm6000_audio_fini,
- .fillbuf = tm6000_fillbuf,
-};
-
-static int __init tm6000_alsa_register(void)
-{
- return tm6000_register_extension(&audio_ops);
-}
-
-static void __exit tm6000_alsa_unregister(void)
-{
- tm6000_unregister_extension(&audio_ops);
-}
-
-module_init(tm6000_alsa_register);
-module_exit(tm6000_alsa_unregister);
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-// tm6000-cards.c - driver for TM5600/TM6000/TM6010 USB video capture devices
-//
-// Copyright (c) 2006-2007 Mauro Carvalho Chehab <mchehab@kernel.org>
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/usb.h>
-#include <linux/slab.h>
-#include <media/v4l2-common.h>
-#include <media/tuner.h>
-#include <media/i2c/tvaudio.h>
-#include <media/rc-map.h>
-
-#include "tm6000.h"
-#include "tm6000-regs.h"
-#include "xc2028.h"
-#include "xc5000.h"
-
-#define TM6000_BOARD_UNKNOWN 0
-#define TM5600_BOARD_GENERIC 1
-#define TM6000_BOARD_GENERIC 2
-#define TM6010_BOARD_GENERIC 3
-#define TM5600_BOARD_10MOONS_UT821 4
-#define TM5600_BOARD_10MOONS_UT330 5
-#define TM6000_BOARD_ADSTECH_DUAL_TV 6
-#define TM6000_BOARD_FREECOM_AND_SIMILAR 7
-#define TM6000_BOARD_ADSTECH_MINI_DUAL_TV 8
-#define TM6010_BOARD_HAUPPAUGE_900H 9
-#define TM6010_BOARD_BEHOLD_WANDER 10
-#define TM6010_BOARD_BEHOLD_VOYAGER 11
-#define TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE 12
-#define TM6010_BOARD_TWINHAN_TU501 13
-#define TM6010_BOARD_BEHOLD_WANDER_LITE 14
-#define TM6010_BOARD_BEHOLD_VOYAGER_LITE 15
-#define TM5600_BOARD_TERRATEC_GRABSTER 16
-
-#define is_generic(model) ((model == TM6000_BOARD_UNKNOWN) || \
- (model == TM5600_BOARD_GENERIC) || \
- (model == TM6000_BOARD_GENERIC) || \
- (model == TM6010_BOARD_GENERIC))
-
-#define TM6000_MAXBOARDS 16
-static unsigned int card[] = {[0 ... (TM6000_MAXBOARDS - 1)] = UNSET };
-
-module_param_array(card, int, NULL, 0444);
-
-static unsigned long tm6000_devused;
-
-
-struct tm6000_board {
- char *name;
- char eename[16]; /* EEPROM name */
- unsigned eename_size; /* size of EEPROM name */
- unsigned eename_pos; /* Position where it appears at ROM */
-
- struct tm6000_capabilities caps;
-
- enum tm6000_devtype type; /* variant of the chipset */
- int tuner_type; /* type of the tuner */
- int tuner_addr; /* tuner address */
- int demod_addr; /* demodulator address */
-
- struct tm6000_gpio gpio;
-
- struct tm6000_input vinput[3];
- struct tm6000_input rinput;
-
- char *ir_codes;
-};
-
-static struct tm6000_board tm6000_boards[] = {
- [TM6000_BOARD_UNKNOWN] = {
- .name = "Unknown tm6000 video grabber",
- .caps = {
- .has_tuner = 1,
- .has_eeprom = 1,
- },
- .gpio = {
- .tuner_reset = TM6000_GPIO_1,
- },
- .vinput = { {
- .type = TM6000_INPUT_TV,
- .vmux = TM6000_VMUX_VIDEO_B,
- .amux = TM6000_AMUX_ADC1,
- }, {
- .type = TM6000_INPUT_COMPOSITE1,
- .vmux = TM6000_VMUX_VIDEO_A,
- .amux = TM6000_AMUX_ADC2,
- }, {
- .type = TM6000_INPUT_SVIDEO,
- .vmux = TM6000_VMUX_VIDEO_AB,
- .amux = TM6000_AMUX_ADC2,
- },
- },
- },
- [TM5600_BOARD_GENERIC] = {
- .name = "Generic tm5600 board",
- .type = TM5600,
- .tuner_type = TUNER_XC2028,
- .tuner_addr = 0xc2 >> 1,
- .caps = {
- .has_tuner = 1,
- .has_eeprom = 1,
- },
- .gpio = {
- .tuner_reset = TM6000_GPIO_1,
- },
- .vinput = { {
- .type = TM6000_INPUT_TV,
- .vmux = TM6000_VMUX_VIDEO_B,
- .amux = TM6000_AMUX_ADC1,
- }, {
- .type = TM6000_INPUT_COMPOSITE1,
- .vmux = TM6000_VMUX_VIDEO_A,
- .amux = TM6000_AMUX_ADC2,
- }, {
- .type = TM6000_INPUT_SVIDEO,
- .vmux = TM6000_VMUX_VIDEO_AB,
- .amux = TM6000_AMUX_ADC2,
- },
- },
- },
- [TM6000_BOARD_GENERIC] = {
- .name = "Generic tm6000 board",
- .tuner_type = TUNER_XC2028,
- .tuner_addr = 0xc2 >> 1,
- .caps = {
- .has_tuner = 1,
- .has_eeprom = 1,
- },
- .gpio = {
- .tuner_reset = TM6000_GPIO_1,
- },
- .vinput = { {
- .type = TM6000_INPUT_TV,
- .vmux = TM6000_VMUX_VIDEO_B,
- .amux = TM6000_AMUX_ADC1,
- }, {
- .type = TM6000_INPUT_COMPOSITE1,
- .vmux = TM6000_VMUX_VIDEO_A,
- .amux = TM6000_AMUX_ADC2,
- }, {
- .type = TM6000_INPUT_SVIDEO,
- .vmux = TM6000_VMUX_VIDEO_AB,
- .amux = TM6000_AMUX_ADC2,
- },
- },
- },
- [TM6010_BOARD_GENERIC] = {
- .name = "Generic tm6010 board",
- .type = TM6010,
- .tuner_type = TUNER_XC2028,
- .tuner_addr = 0xc2 >> 1,
- .demod_addr = 0x1e >> 1,
- .caps = {
- .has_tuner = 1,
- .has_dvb = 1,
- .has_zl10353 = 1,
- .has_eeprom = 1,
- .has_remote = 1,
- },
- .gpio = {
- .tuner_reset = TM6010_GPIO_2,
- .tuner_on = TM6010_GPIO_3,
- .demod_reset = TM6010_GPIO_1,
- .demod_on = TM6010_GPIO_4,
- .power_led = TM6010_GPIO_7,
- .dvb_led = TM6010_GPIO_5,
- .ir = TM6010_GPIO_0,
- },
- .vinput = { {
- .type = TM6000_INPUT_TV,
- .vmux = TM6000_VMUX_VIDEO_B,
- .amux = TM6000_AMUX_SIF1,
- }, {
- .type = TM6000_INPUT_COMPOSITE1,
- .vmux = TM6000_VMUX_VIDEO_A,
- .amux = TM6000_AMUX_ADC2,
- }, {
- .type = TM6000_INPUT_SVIDEO,
- .vmux = TM6000_VMUX_VIDEO_AB,
- .amux = TM6000_AMUX_ADC2,
- },
- },
- },
- [TM5600_BOARD_10MOONS_UT821] = {
- .name = "10Moons UT 821",
- .tuner_type = TUNER_XC2028,
- .eename = { '1', '0', 'M', 'O', 'O', 'N', 'S', '5', '6', '0', '0', 0xff, 0x45, 0x5b},
- .eename_size = 14,
- .eename_pos = 0x14,
- .type = TM5600,
- .tuner_addr = 0xc2 >> 1,
- .caps = {
- .has_tuner = 1,
- .has_eeprom = 1,
- },
- .gpio = {
- .tuner_reset = TM6000_GPIO_1,
- },
- .vinput = { {
- .type = TM6000_INPUT_TV,
- .vmux = TM6000_VMUX_VIDEO_B,
- .amux = TM6000_AMUX_ADC1,
- }, {
- .type = TM6000_INPUT_COMPOSITE1,
- .vmux = TM6000_VMUX_VIDEO_A,
- .amux = TM6000_AMUX_ADC2,
- }, {
- .type = TM6000_INPUT_SVIDEO,
- .vmux = TM6000_VMUX_VIDEO_AB,
- .amux = TM6000_AMUX_ADC2,
- },
- },
- },
- [TM5600_BOARD_10MOONS_UT330] = {
- .name = "10Moons UT 330",
- .tuner_type = TUNER_PHILIPS_FQ1216AME_MK4,
- .tuner_addr = 0xc8 >> 1,
- .caps = {
- .has_tuner = 1,
- .has_dvb = 0,
- .has_zl10353 = 0,
- .has_eeprom = 1,
- },
- .vinput = { {
- .type = TM6000_INPUT_TV,
- .vmux = TM6000_VMUX_VIDEO_B,
- .amux = TM6000_AMUX_ADC1,
- }, {
- .type = TM6000_INPUT_COMPOSITE1,
- .vmux = TM6000_VMUX_VIDEO_A,
- .amux = TM6000_AMUX_ADC2,
- }, {
- .type = TM6000_INPUT_SVIDEO,
- .vmux = TM6000_VMUX_VIDEO_AB,
- .amux = TM6000_AMUX_ADC2,
- },
- },
- },
- [TM6000_BOARD_ADSTECH_DUAL_TV] = {
- .name = "ADSTECH Dual TV USB",
- .tuner_type = TUNER_XC2028,
- .tuner_addr = 0xc8 >> 1,
- .caps = {
- .has_tuner = 1,
- .has_tda9874 = 1,
- .has_dvb = 1,
- .has_zl10353 = 1,
- .has_eeprom = 1,
- },
- .vinput = { {
- .type = TM6000_INPUT_TV,
- .vmux = TM6000_VMUX_VIDEO_B,
- .amux = TM6000_AMUX_ADC1,
- }, {
- .type = TM6000_INPUT_COMPOSITE1,
- .vmux = TM6000_VMUX_VIDEO_A,
- .amux = TM6000_AMUX_ADC2,
- }, {
- .type = TM6000_INPUT_SVIDEO,
- .vmux = TM6000_VMUX_VIDEO_AB,
- .amux = TM6000_AMUX_ADC2,
- },
- },
- },
- [TM6000_BOARD_FREECOM_AND_SIMILAR] = {
- .name = "Freecom Hybrid Stick / Moka DVB-T Receiver Dual",
- .tuner_type = TUNER_XC2028, /* has a XC3028 */
- .tuner_addr = 0xc2 >> 1,
- .demod_addr = 0x1e >> 1,
- .caps = {
- .has_tuner = 1,
- .has_dvb = 1,
- .has_zl10353 = 1,
- .has_eeprom = 0,
- .has_remote = 1,
- },
- .gpio = {
- .tuner_reset = TM6000_GPIO_4,
- },
- .vinput = { {
- .type = TM6000_INPUT_TV,
- .vmux = TM6000_VMUX_VIDEO_B,
- .amux = TM6000_AMUX_ADC1,
- }, {
- .type = TM6000_INPUT_COMPOSITE1,
- .vmux = TM6000_VMUX_VIDEO_A,
- .amux = TM6000_AMUX_ADC2,
- }, {
- .type = TM6000_INPUT_SVIDEO,
- .vmux = TM6000_VMUX_VIDEO_AB,
- .amux = TM6000_AMUX_ADC2,
- },
- },
- },
- [TM6000_BOARD_ADSTECH_MINI_DUAL_TV] = {
- .name = "ADSTECH Mini Dual TV USB",
- .tuner_type = TUNER_XC2028, /* has a XC3028 */
- .tuner_addr = 0xc8 >> 1,
- .demod_addr = 0x1e >> 1,
- .caps = {
- .has_tuner = 1,
- .has_dvb = 1,
- .has_zl10353 = 1,
- .has_eeprom = 0,
- },
- .gpio = {
- .tuner_reset = TM6000_GPIO_4,
- },
- .vinput = { {
- .type = TM6000_INPUT_TV,
- .vmux = TM6000_VMUX_VIDEO_B,
- .amux = TM6000_AMUX_ADC1,
- }, {
- .type = TM6000_INPUT_COMPOSITE1,
- .vmux = TM6000_VMUX_VIDEO_A,
- .amux = TM6000_AMUX_ADC2,
- }, {
- .type = TM6000_INPUT_SVIDEO,
- .vmux = TM6000_VMUX_VIDEO_AB,
- .amux = TM6000_AMUX_ADC2,
- },
- },
- },
- [TM6010_BOARD_HAUPPAUGE_900H] = {
- .name = "Hauppauge WinTV HVR-900H / WinTV USB2-Stick",
- .eename = { 'H', 0, 'V', 0, 'R', 0, '9', 0, '0', 0, '0', 0, 'H', 0 },
- .eename_size = 14,
- .eename_pos = 0x42,
- .tuner_type = TUNER_XC2028, /* has a XC3028 */
- .tuner_addr = 0xc2 >> 1,
- .demod_addr = 0x1e >> 1,
- .type = TM6010,
- .ir_codes = RC_MAP_HAUPPAUGE,
- .caps = {
- .has_tuner = 1,
- .has_dvb = 1,
- .has_zl10353 = 1,
- .has_eeprom = 1,
- .has_remote = 1,
- },
- .gpio = {
- .tuner_reset = TM6010_GPIO_2,
- .tuner_on = TM6010_GPIO_3,
- .demod_reset = TM6010_GPIO_1,
- .demod_on = TM6010_GPIO_4,
- .power_led = TM6010_GPIO_7,
- .dvb_led = TM6010_GPIO_5,
- .ir = TM6010_GPIO_0,
- },
- .vinput = { {
- .type = TM6000_INPUT_TV,
- .vmux = TM6000_VMUX_VIDEO_B,
- .amux = TM6000_AMUX_SIF1,
- }, {
- .type = TM6000_INPUT_COMPOSITE1,
- .vmux = TM6000_VMUX_VIDEO_A,
- .amux = TM6000_AMUX_ADC2,
- }, {
- .type = TM6000_INPUT_SVIDEO,
- .vmux = TM6000_VMUX_VIDEO_AB,
- .amux = TM6000_AMUX_ADC2,
- },
- },
- },
- [TM6010_BOARD_BEHOLD_WANDER] = {
- .name = "Beholder Wander DVB-T/TV/FM USB2.0",
- .tuner_type = TUNER_XC5000,
- .tuner_addr = 0xc2 >> 1,
- .demod_addr = 0x1e >> 1,
- .type = TM6010,
- .caps = {
- .has_tuner = 1,
- .has_dvb = 1,
- .has_zl10353 = 1,
- .has_eeprom = 1,
- .has_remote = 1,
- .has_radio = 1,
- },
- .gpio = {
- .tuner_reset = TM6010_GPIO_0,
- .demod_reset = TM6010_GPIO_1,
- .power_led = TM6010_GPIO_6,
- },
- .vinput = { {
- .type = TM6000_INPUT_TV,
- .vmux = TM6000_VMUX_VIDEO_B,
- .amux = TM6000_AMUX_SIF1,
- }, {
- .type = TM6000_INPUT_COMPOSITE1,
- .vmux = TM6000_VMUX_VIDEO_A,
- .amux = TM6000_AMUX_ADC2,
- }, {
- .type = TM6000_INPUT_SVIDEO,
- .vmux = TM6000_VMUX_VIDEO_AB,
- .amux = TM6000_AMUX_ADC2,
- },
- },
- .rinput = {
- .type = TM6000_INPUT_RADIO,
- .amux = TM6000_AMUX_ADC1,
- },
- },
- [TM6010_BOARD_BEHOLD_VOYAGER] = {
- .name = "Beholder Voyager TV/FM USB2.0",
- .tuner_type = TUNER_XC5000,
- .tuner_addr = 0xc2 >> 1,
- .type = TM6010,
- .caps = {
- .has_tuner = 1,
- .has_dvb = 0,
- .has_zl10353 = 0,
- .has_eeprom = 1,
- .has_remote = 1,
- .has_radio = 1,
- },
- .gpio = {
- .tuner_reset = TM6010_GPIO_0,
- .power_led = TM6010_GPIO_6,
- },
- .vinput = { {
- .type = TM6000_INPUT_TV,
- .vmux = TM6000_VMUX_VIDEO_B,
- .amux = TM6000_AMUX_SIF1,
- }, {
- .type = TM6000_INPUT_COMPOSITE1,
- .vmux = TM6000_VMUX_VIDEO_A,
- .amux = TM6000_AMUX_ADC2,
- }, {
- .type = TM6000_INPUT_SVIDEO,
- .vmux = TM6000_VMUX_VIDEO_AB,
- .amux = TM6000_AMUX_ADC2,
- },
- },
- .rinput = {
- .type = TM6000_INPUT_RADIO,
- .amux = TM6000_AMUX_ADC1,
- },
- },
- [TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE] = {
- .name = "Terratec Cinergy Hybrid XE / Cinergy Hybrid-Stick",
- .tuner_type = TUNER_XC2028, /* has a XC3028 */
- .tuner_addr = 0xc2 >> 1,
- .demod_addr = 0x1e >> 1,
- .type = TM6010,
- .caps = {
- .has_tuner = 1,
- .has_dvb = 1,
- .has_zl10353 = 1,
- .has_eeprom = 1,
- .has_remote = 1,
- .has_radio = 1,
- },
- .gpio = {
- .tuner_reset = TM6010_GPIO_2,
- .tuner_on = TM6010_GPIO_3,
- .demod_reset = TM6010_GPIO_1,
- .demod_on = TM6010_GPIO_4,
- .power_led = TM6010_GPIO_7,
- .dvb_led = TM6010_GPIO_5,
- .ir = TM6010_GPIO_0,
- },
- .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
- .vinput = { {
- .type = TM6000_INPUT_TV,
- .vmux = TM6000_VMUX_VIDEO_B,
- .amux = TM6000_AMUX_SIF1,
- }, {
- .type = TM6000_INPUT_COMPOSITE1,
- .vmux = TM6000_VMUX_VIDEO_A,
- .amux = TM6000_AMUX_ADC2,
- }, {
- .type = TM6000_INPUT_SVIDEO,
- .vmux = TM6000_VMUX_VIDEO_AB,
- .amux = TM6000_AMUX_ADC2,
- },
- },
- .rinput = {
- .type = TM6000_INPUT_RADIO,
- .amux = TM6000_AMUX_SIF1,
- },
- },
- [TM5600_BOARD_TERRATEC_GRABSTER] = {
- .name = "Terratec Grabster AV 150/250 MX",
- .type = TM5600,
- .tuner_type = TUNER_ABSENT,
- .vinput = { {
- .type = TM6000_INPUT_TV,
- .vmux = TM6000_VMUX_VIDEO_B,
- .amux = TM6000_AMUX_ADC1,
- }, {
- .type = TM6000_INPUT_COMPOSITE1,
- .vmux = TM6000_VMUX_VIDEO_A,
- .amux = TM6000_AMUX_ADC2,
- }, {
- .type = TM6000_INPUT_SVIDEO,
- .vmux = TM6000_VMUX_VIDEO_AB,
- .amux = TM6000_AMUX_ADC2,
- },
- },
- },
- [TM6010_BOARD_TWINHAN_TU501] = {
- .name = "Twinhan TU501(704D1)",
- .tuner_type = TUNER_XC2028, /* has a XC3028 */
- .tuner_addr = 0xc2 >> 1,
- .demod_addr = 0x1e >> 1,
- .type = TM6010,
- .caps = {
- .has_tuner = 1,
- .has_dvb = 1,
- .has_zl10353 = 1,
- .has_eeprom = 1,
- .has_remote = 1,
- },
- .gpio = {
- .tuner_reset = TM6010_GPIO_2,
- .tuner_on = TM6010_GPIO_3,
- .demod_reset = TM6010_GPIO_1,
- .demod_on = TM6010_GPIO_4,
- .power_led = TM6010_GPIO_7,
- .dvb_led = TM6010_GPIO_5,
- .ir = TM6010_GPIO_0,
- },
- .vinput = { {
- .type = TM6000_INPUT_TV,
- .vmux = TM6000_VMUX_VIDEO_B,
- .amux = TM6000_AMUX_SIF1,
- }, {
- .type = TM6000_INPUT_COMPOSITE1,
- .vmux = TM6000_VMUX_VIDEO_A,
- .amux = TM6000_AMUX_ADC2,
- }, {
- .type = TM6000_INPUT_SVIDEO,
- .vmux = TM6000_VMUX_VIDEO_AB,
- .amux = TM6000_AMUX_ADC2,
- },
- },
- },
- [TM6010_BOARD_BEHOLD_WANDER_LITE] = {
- .name = "Beholder Wander Lite DVB-T/TV/FM USB2.0",
- .tuner_type = TUNER_XC5000,
- .tuner_addr = 0xc2 >> 1,
- .demod_addr = 0x1e >> 1,
- .type = TM6010,
- .caps = {
- .has_tuner = 1,
- .has_dvb = 1,
- .has_zl10353 = 1,
- .has_eeprom = 1,
- .has_remote = 0,
- .has_radio = 1,
- },
- .gpio = {
- .tuner_reset = TM6010_GPIO_0,
- .demod_reset = TM6010_GPIO_1,
- .power_led = TM6010_GPIO_6,
- },
- .vinput = { {
- .type = TM6000_INPUT_TV,
- .vmux = TM6000_VMUX_VIDEO_B,
- .amux = TM6000_AMUX_SIF1,
- },
- },
- .rinput = {
- .type = TM6000_INPUT_RADIO,
- .amux = TM6000_AMUX_ADC1,
- },
- },
- [TM6010_BOARD_BEHOLD_VOYAGER_LITE] = {
- .name = "Beholder Voyager Lite TV/FM USB2.0",
- .tuner_type = TUNER_XC5000,
- .tuner_addr = 0xc2 >> 1,
- .type = TM6010,
- .caps = {
- .has_tuner = 1,
- .has_dvb = 0,
- .has_zl10353 = 0,
- .has_eeprom = 1,
- .has_remote = 0,
- .has_radio = 1,
- },
- .gpio = {
- .tuner_reset = TM6010_GPIO_0,
- .power_led = TM6010_GPIO_6,
- },
- .vinput = { {
- .type = TM6000_INPUT_TV,
- .vmux = TM6000_VMUX_VIDEO_B,
- .amux = TM6000_AMUX_SIF1,
- },
- },
- .rinput = {
- .type = TM6000_INPUT_RADIO,
- .amux = TM6000_AMUX_ADC1,
- },
- },
-};
-
-/* table of devices that work with this driver */
-static const struct usb_device_id tm6000_id_table[] = {
- { USB_DEVICE(0x6000, 0x0001), .driver_info = TM5600_BOARD_GENERIC },
- { USB_DEVICE(0x6000, 0x0002), .driver_info = TM6010_BOARD_GENERIC },
- { USB_DEVICE(0x06e1, 0xf332), .driver_info = TM6000_BOARD_ADSTECH_DUAL_TV },
- { USB_DEVICE(0x14aa, 0x0620), .driver_info = TM6000_BOARD_FREECOM_AND_SIMILAR },
- { USB_DEVICE(0x06e1, 0xb339), .driver_info = TM6000_BOARD_ADSTECH_MINI_DUAL_TV },
- { USB_DEVICE(0x2040, 0x6600), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
- { USB_DEVICE(0x2040, 0x6601), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
- { USB_DEVICE(0x2040, 0x6610), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
- { USB_DEVICE(0x2040, 0x6611), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
- { USB_DEVICE(0x6000, 0xdec0), .driver_info = TM6010_BOARD_BEHOLD_WANDER },
- { USB_DEVICE(0x6000, 0xdec1), .driver_info = TM6010_BOARD_BEHOLD_VOYAGER },
- { USB_DEVICE(0x0ccd, 0x0086), .driver_info = TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE },
- { USB_DEVICE(0x0ccd, 0x00A5), .driver_info = TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE },
- { USB_DEVICE(0x0ccd, 0x0079), .driver_info = TM5600_BOARD_TERRATEC_GRABSTER },
- { USB_DEVICE(0x13d3, 0x3240), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
- { USB_DEVICE(0x13d3, 0x3241), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
- { USB_DEVICE(0x13d3, 0x3243), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
- { USB_DEVICE(0x13d3, 0x3264), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
- { USB_DEVICE(0x6000, 0xdec2), .driver_info = TM6010_BOARD_BEHOLD_WANDER_LITE },
- { USB_DEVICE(0x6000, 0xdec3), .driver_info = TM6010_BOARD_BEHOLD_VOYAGER_LITE },
- { }
-};
-MODULE_DEVICE_TABLE(usb, tm6000_id_table);
-
-/* Control power led for show some activity */
-void tm6000_flash_led(struct tm6000_core *dev, u8 state)
-{
- /* Power LED unconfigured */
- if (!dev->gpio.power_led)
- return;
-
- /* ON Power LED */
- if (state) {
- switch (dev->model) {
- case TM6010_BOARD_HAUPPAUGE_900H:
- case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
- case TM6010_BOARD_TWINHAN_TU501:
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.power_led, 0x00);
- break;
- case TM6010_BOARD_BEHOLD_WANDER:
- case TM6010_BOARD_BEHOLD_VOYAGER:
- case TM6010_BOARD_BEHOLD_WANDER_LITE:
- case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.power_led, 0x01);
- break;
- }
- }
- /* OFF Power LED */
- else {
- switch (dev->model) {
- case TM6010_BOARD_HAUPPAUGE_900H:
- case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
- case TM6010_BOARD_TWINHAN_TU501:
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.power_led, 0x01);
- break;
- case TM6010_BOARD_BEHOLD_WANDER:
- case TM6010_BOARD_BEHOLD_VOYAGER:
- case TM6010_BOARD_BEHOLD_WANDER_LITE:
- case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.power_led, 0x00);
- break;
- }
- }
-}
-
-/* Tuner callback to provide the proper gpio changes needed for xc5000 */
-int tm6000_xc5000_callback(void *ptr, int component, int command, int arg)
-{
- int rc = 0;
- struct tm6000_core *dev = ptr;
-
- if (dev->tuner_type != TUNER_XC5000)
- return 0;
-
- switch (command) {
- case XC5000_TUNER_RESET:
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.tuner_reset, 0x01);
- msleep(15);
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.tuner_reset, 0x00);
- msleep(15);
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.tuner_reset, 0x01);
- break;
- }
- return rc;
-}
-EXPORT_SYMBOL_GPL(tm6000_xc5000_callback);
-
-/* Tuner callback to provide the proper gpio changes needed for xc2028 */
-
-int tm6000_tuner_callback(void *ptr, int component, int command, int arg)
-{
- int rc = 0;
- struct tm6000_core *dev = ptr;
-
- if (dev->tuner_type != TUNER_XC2028)
- return 0;
-
- switch (command) {
- case XC2028_RESET_CLK:
- tm6000_ir_wait(dev, 0);
-
- tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT,
- 0x02, arg);
- msleep(10);
- rc = tm6000_i2c_reset(dev, 10);
- break;
- case XC2028_TUNER_RESET:
- /* Reset codes during load firmware */
- switch (arg) {
- case 0:
- /* newer tuner can faster reset */
- switch (dev->model) {
- case TM5600_BOARD_10MOONS_UT821:
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.tuner_reset, 0x01);
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- 0x300, 0x01);
- msleep(10);
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.tuner_reset, 0x00);
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- 0x300, 0x00);
- msleep(10);
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.tuner_reset, 0x01);
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- 0x300, 0x01);
- break;
- case TM6010_BOARD_HAUPPAUGE_900H:
- case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
- case TM6010_BOARD_TWINHAN_TU501:
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.tuner_reset, 0x01);
- msleep(60);
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.tuner_reset, 0x00);
- msleep(75);
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.tuner_reset, 0x01);
- msleep(60);
- break;
- default:
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.tuner_reset, 0x00);
- msleep(130);
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.tuner_reset, 0x01);
- msleep(130);
- break;
- }
-
- tm6000_ir_wait(dev, 1);
- break;
- case 1:
- tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT,
- 0x02, 0x01);
- msleep(10);
- break;
- case 2:
- rc = tm6000_i2c_reset(dev, 100);
- break;
- }
- break;
- case XC2028_I2C_FLUSH:
- tm6000_set_reg(dev, REQ_50_SET_START, 0, 0);
- tm6000_set_reg(dev, REQ_51_SET_STOP, 0, 0);
- break;
- }
- return rc;
-}
-EXPORT_SYMBOL_GPL(tm6000_tuner_callback);
-
-int tm6000_cards_setup(struct tm6000_core *dev)
-{
- /*
- * Board-specific initialization sequence. Handles all GPIO
- * initialization sequences that are board-specific.
- * Up to now, all found devices use GPIO1 and GPIO4 at the same way.
- * Probably, they're all based on some reference device. Due to that,
- * there's a common routine at the end to handle those GPIO's. Devices
- * that use different pinups or init sequences can just return at
- * the board-specific session.
- */
- switch (dev->model) {
- case TM6010_BOARD_HAUPPAUGE_900H:
- case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
- case TM6010_BOARD_TWINHAN_TU501:
- case TM6010_BOARD_GENERIC:
- /* Turn xceive 3028 on */
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.tuner_on, 0x01);
- msleep(15);
- /* Turn zarlink zl10353 on */
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00);
- msleep(15);
- /* Reset zarlink zl10353 */
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00);
- msleep(50);
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01);
- msleep(15);
- /* Turn zarlink zl10353 off */
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x01);
- msleep(15);
- /* ir ? */
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.ir, 0x01);
- msleep(15);
- /* Power led on (blue) */
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x00);
- msleep(15);
- /* DVB led off (orange) */
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.dvb_led, 0x01);
- msleep(15);
- /* Turn zarlink zl10353 on */
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00);
- msleep(15);
- break;
- case TM6010_BOARD_BEHOLD_WANDER:
- case TM6010_BOARD_BEHOLD_WANDER_LITE:
- /* Power led on (blue) */
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01);
- msleep(15);
- /* Reset zarlink zl10353 */
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00);
- msleep(50);
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01);
- msleep(15);
- break;
- case TM6010_BOARD_BEHOLD_VOYAGER:
- case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
- /* Power led on (blue) */
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01);
- msleep(15);
- break;
- default:
- break;
- }
-
- /*
- * Default initialization. Most of the devices seem to use GPIO1
- * and GPIO4.on the same way, so, this handles the common sequence
- * used by most devices.
- * If a device uses a different sequence or different GPIO pins for
- * reset, just add the code at the board-specific part
- */
-
- if (dev->gpio.tuner_reset) {
- int rc;
- int i;
-
- for (i = 0; i < 2; i++) {
- rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.tuner_reset, 0x00);
- if (rc < 0) {
- printk(KERN_ERR "Error %i doing tuner reset\n", rc);
- return rc;
- }
-
- msleep(10); /* Just to be conservative */
- rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.tuner_reset, 0x01);
- if (rc < 0) {
- printk(KERN_ERR "Error %i doing tuner reset\n", rc);
- return rc;
- }
- }
- } else {
- printk(KERN_ERR "Tuner reset is not configured\n");
- return -1;
- }
-
- msleep(50);
-
- return 0;
-};
-
-static void tm6000_config_tuner(struct tm6000_core *dev)
-{
- struct tuner_setup tun_setup;
-
- /* Load tuner module */
- v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- "tuner", dev->tuner_addr, NULL);
-
- memset(&tun_setup, 0, sizeof(tun_setup));
- tun_setup.type = dev->tuner_type;
- tun_setup.addr = dev->tuner_addr;
-
- tun_setup.mode_mask = 0;
- if (dev->caps.has_tuner)
- tun_setup.mode_mask |= (T_ANALOG_TV | T_RADIO);
-
- switch (dev->tuner_type) {
- case TUNER_XC2028:
- tun_setup.tuner_callback = tm6000_tuner_callback;
- break;
- case TUNER_XC5000:
- tun_setup.tuner_callback = tm6000_xc5000_callback;
- break;
- }
-
- v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
-
- switch (dev->tuner_type) {
- case TUNER_XC2028: {
- struct v4l2_priv_tun_config xc2028_cfg;
- struct xc2028_ctrl ctl;
-
- memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
- memset(&ctl, 0, sizeof(ctl));
-
- ctl.demod = XC3028_FE_ZARLINK456;
-
- xc2028_cfg.tuner = TUNER_XC2028;
- xc2028_cfg.priv = &ctl;
-
- switch (dev->model) {
- case TM6010_BOARD_HAUPPAUGE_900H:
- case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
- case TM6010_BOARD_TWINHAN_TU501:
- ctl.max_len = 80;
- ctl.fname = "xc3028L-v36.fw";
- break;
- default:
- if (dev->dev_type == TM6010)
- ctl.fname = "xc3028-v27.fw";
- else
- ctl.fname = "xc3028-v24.fw";
- }
-
- printk(KERN_INFO "Setting firmware parameters for xc2028\n");
- v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config,
- &xc2028_cfg);
-
- }
- break;
- case TUNER_XC5000:
- {
- struct v4l2_priv_tun_config xc5000_cfg;
- struct xc5000_config ctl = {
- .i2c_address = dev->tuner_addr,
- .if_khz = 4570,
- .radio_input = XC5000_RADIO_FM1_MONO,
- };
-
- xc5000_cfg.tuner = TUNER_XC5000;
- xc5000_cfg.priv = &ctl;
-
- v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config,
- &xc5000_cfg);
- }
- break;
- default:
- printk(KERN_INFO "Unknown tuner type. Tuner is not configured.\n");
- break;
- }
-}
-
-static int fill_board_specific_data(struct tm6000_core *dev)
-{
- int rc;
-
- dev->dev_type = tm6000_boards[dev->model].type;
- dev->tuner_type = tm6000_boards[dev->model].tuner_type;
- dev->tuner_addr = tm6000_boards[dev->model].tuner_addr;
-
- dev->gpio = tm6000_boards[dev->model].gpio;
-
- dev->ir_codes = tm6000_boards[dev->model].ir_codes;
-
- dev->demod_addr = tm6000_boards[dev->model].demod_addr;
-
- dev->caps = tm6000_boards[dev->model].caps;
-
- dev->vinput[0] = tm6000_boards[dev->model].vinput[0];
- dev->vinput[1] = tm6000_boards[dev->model].vinput[1];
- dev->vinput[2] = tm6000_boards[dev->model].vinput[2];
- dev->rinput = tm6000_boards[dev->model].rinput;
-
- /* setup per-model quirks */
- switch (dev->model) {
- case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
- case TM6010_BOARD_HAUPPAUGE_900H:
- dev->quirks |= TM6000_QUIRK_NO_USB_DELAY;
- break;
-
- default:
- break;
- }
-
- /* initialize hardware */
- rc = tm6000_init(dev);
- if (rc < 0)
- return rc;
-
- return v4l2_device_register(&dev->udev->dev, &dev->v4l2_dev);
-}
-
-
-static void use_alternative_detection_method(struct tm6000_core *dev)
-{
- int i, model = -1;
-
- if (!dev->eedata_size)
- return;
-
- for (i = 0; i < ARRAY_SIZE(tm6000_boards); i++) {
- if (!tm6000_boards[i].eename_size)
- continue;
- if (dev->eedata_size < tm6000_boards[i].eename_pos +
- tm6000_boards[i].eename_size)
- continue;
-
- if (!memcmp(&dev->eedata[tm6000_boards[i].eename_pos],
- tm6000_boards[i].eename,
- tm6000_boards[i].eename_size)) {
- model = i;
- break;
- }
- }
- if (model < 0) {
- printk(KERN_INFO "Device has eeprom but is currently unknown\n");
- return;
- }
-
- dev->model = model;
-
- printk(KERN_INFO "Device identified via eeprom as %s (type = %d)\n",
- tm6000_boards[model].name, model);
-}
-
-#if defined(CONFIG_MODULES) && defined(MODULE)
-static void request_module_async(struct work_struct *work)
-{
- struct tm6000_core *dev = container_of(work, struct tm6000_core,
- request_module_wk);
-
- request_module("tm6000-alsa");
-
- if (dev->caps.has_dvb)
- request_module("tm6000-dvb");
-}
-
-static void request_modules(struct tm6000_core *dev)
-{
- INIT_WORK(&dev->request_module_wk, request_module_async);
- schedule_work(&dev->request_module_wk);
-}
-
-static void flush_request_modules(struct tm6000_core *dev)
-{
- flush_work(&dev->request_module_wk);
-}
-#else
-#define request_modules(dev)
-#define flush_request_modules(dev)
-#endif /* CONFIG_MODULES */
-
-static int tm6000_init_dev(struct tm6000_core *dev)
-{
- struct v4l2_frequency f;
- int rc = 0;
-
- mutex_init(&dev->lock);
- mutex_lock(&dev->lock);
-
- if (!is_generic(dev->model)) {
- rc = fill_board_specific_data(dev);
- if (rc < 0)
- goto err;
-
- /* register i2c bus */
- rc = tm6000_i2c_register(dev);
- if (rc < 0)
- goto err;
- } else {
- /* register i2c bus */
- rc = tm6000_i2c_register(dev);
- if (rc < 0)
- goto err;
-
- use_alternative_detection_method(dev);
-
- rc = fill_board_specific_data(dev);
- if (rc < 0)
- goto err;
- }
-
- /* Default values for STD and resolutions */
- dev->width = 720;
- dev->height = 480;
- dev->norm = V4L2_STD_NTSC_M;
-
- /* Configure tuner */
- tm6000_config_tuner(dev);
-
- /* Set video standard */
- v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_std, dev->norm);
-
- /* Set tuner frequency - also loads firmware on xc2028/xc3028 */
- f.tuner = 0;
- f.type = V4L2_TUNER_ANALOG_TV;
- f.frequency = 3092; /* 193.25 MHz */
- dev->freq = f.frequency;
- v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
-
- if (dev->caps.has_tda9874)
- v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- "tvaudio", I2C_ADDR_TDA9874, NULL);
-
- /* register and initialize V4L2 */
- rc = tm6000_v4l2_register(dev);
- if (rc < 0)
- goto err;
-
- tm6000_add_into_devlist(dev);
- tm6000_init_extension(dev);
-
- tm6000_ir_init(dev);
-
- request_modules(dev);
-
- mutex_unlock(&dev->lock);
- return 0;
-
-err:
- mutex_unlock(&dev->lock);
- return rc;
-}
-
-/* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */
-#define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
-
-static void get_max_endpoint(struct usb_device *udev,
- struct usb_host_interface *alt,
- char *msgtype,
- struct usb_host_endpoint *curr_e,
- struct tm6000_endpoint *tm_ep)
-{
- u16 tmp = le16_to_cpu(curr_e->desc.wMaxPacketSize);
- unsigned int size = tmp & 0x7ff;
-
- if (udev->speed == USB_SPEED_HIGH)
- size = size * hb_mult(tmp);
-
- if (size > tm_ep->maxsize) {
- tm_ep->endp = curr_e;
- tm_ep->maxsize = size;
- tm_ep->bInterfaceNumber = alt->desc.bInterfaceNumber;
- tm_ep->bAlternateSetting = alt->desc.bAlternateSetting;
-
- printk(KERN_INFO "tm6000: %s endpoint: 0x%02x (max size=%u bytes)\n",
- msgtype, curr_e->desc.bEndpointAddress,
- size);
- }
-}
-
-/*
- * tm6000_usb_probe()
- * checks for supported devices
- */
-static int tm6000_usb_probe(struct usb_interface *interface,
- const struct usb_device_id *id)
-{
- struct usb_device *usbdev;
- struct tm6000_core *dev;
- int i, rc;
- int nr = 0;
- char *speed;
-
- usbdev = usb_get_dev(interface_to_usbdev(interface));
-
- /* Selects the proper interface */
- rc = usb_set_interface(usbdev, 0, 1);
- if (rc < 0)
- goto report_failure;
-
- /* Check to see next free device and mark as used */
- nr = find_first_zero_bit(&tm6000_devused, TM6000_MAXBOARDS);
- if (nr >= TM6000_MAXBOARDS) {
- printk(KERN_ERR "tm6000: Supports only %i tm60xx boards.\n", TM6000_MAXBOARDS);
- rc = -ENOMEM;
- goto put_device;
- }
-
- /* Create and initialize dev struct */
- dev = kzalloc(sizeof(*dev), GFP_KERNEL);
- if (!dev) {
- rc = -ENOMEM;
- goto put_device;
- }
- spin_lock_init(&dev->slock);
- mutex_init(&dev->usb_lock);
-
- /* Increment usage count */
- set_bit(nr, &tm6000_devused);
- snprintf(dev->name, 29, "tm6000 #%d", nr);
-
- dev->model = id->driver_info;
- if (card[nr] < ARRAY_SIZE(tm6000_boards))
- dev->model = card[nr];
-
- dev->udev = usbdev;
- dev->devno = nr;
-
- switch (usbdev->speed) {
- case USB_SPEED_LOW:
- speed = "1.5";
- break;
- case USB_SPEED_UNKNOWN:
- case USB_SPEED_FULL:
- speed = "12";
- break;
- case USB_SPEED_HIGH:
- speed = "480";
- break;
- default:
- speed = "unknown";
- }
-
- /* Get endpoints */
- for (i = 0; i < interface->num_altsetting; i++) {
- int ep;
-
- for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) {
- struct usb_host_endpoint *e;
- int dir_out;
-
- e = &interface->altsetting[i].endpoint[ep];
-
- dir_out = ((e->desc.bEndpointAddress &
- USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT);
-
- printk(KERN_INFO "tm6000: alt %d, interface %i, class %i\n",
- i,
- interface->altsetting[i].desc.bInterfaceNumber,
- interface->altsetting[i].desc.bInterfaceClass);
-
- switch (e->desc.bmAttributes) {
- case USB_ENDPOINT_XFER_BULK:
- if (!dir_out) {
- get_max_endpoint(usbdev,
- &interface->altsetting[i],
- "Bulk IN", e,
- &dev->bulk_in);
- } else {
- get_max_endpoint(usbdev,
- &interface->altsetting[i],
- "Bulk OUT", e,
- &dev->bulk_out);
- }
- break;
- case USB_ENDPOINT_XFER_ISOC:
- if (!dir_out) {
- get_max_endpoint(usbdev,
- &interface->altsetting[i],
- "ISOC IN", e,
- &dev->isoc_in);
- } else {
- get_max_endpoint(usbdev,
- &interface->altsetting[i],
- "ISOC OUT", e,
- &dev->isoc_out);
- }
- break;
- case USB_ENDPOINT_XFER_INT:
- if (!dir_out) {
- get_max_endpoint(usbdev,
- &interface->altsetting[i],
- "INT IN", e,
- &dev->int_in);
- } else {
- get_max_endpoint(usbdev,
- &interface->altsetting[i],
- "INT OUT", e,
- &dev->int_out);
- }
- break;
- }
- }
- }
-
-
- printk(KERN_INFO "tm6000: New video device @ %s Mbps (%04x:%04x, ifnum %d)\n",
- speed,
- le16_to_cpu(dev->udev->descriptor.idVendor),
- le16_to_cpu(dev->udev->descriptor.idProduct),
- interface->altsetting->desc.bInterfaceNumber);
-
-/* check if the the device has the iso in endpoint at the correct place */
- if (!dev->isoc_in.endp) {
- printk(KERN_ERR "tm6000: probing error: no IN ISOC endpoint!\n");
- rc = -ENODEV;
- goto free_device;
- }
-
- /* save our data pointer in this interface device */
- usb_set_intfdata(interface, dev);
-
- printk(KERN_INFO "tm6000: Found %s\n", tm6000_boards[dev->model].name);
-
- rc = tm6000_init_dev(dev);
- if (rc < 0)
- goto free_device;
-
- return 0;
-
-free_device:
- kfree(dev);
-report_failure:
- printk(KERN_ERR "tm6000: Error %d while registering\n", rc);
-
- clear_bit(nr, &tm6000_devused);
-put_device:
- usb_put_dev(usbdev);
- return rc;
-}
-
-/*
- * tm6000_usb_disconnect()
- * called when the device gets disconnected
- * video device will be unregistered on v4l2_close in case it is still open
- */
-static void tm6000_usb_disconnect(struct usb_interface *interface)
-{
- struct tm6000_core *dev = usb_get_intfdata(interface);
- usb_set_intfdata(interface, NULL);
-
- if (!dev)
- return;
-
- printk(KERN_INFO "tm6000: disconnecting %s\n", dev->name);
-
- flush_request_modules(dev);
-
- tm6000_ir_fini(dev);
-
- if (dev->gpio.power_led) {
- switch (dev->model) {
- case TM6010_BOARD_HAUPPAUGE_900H:
- case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
- case TM6010_BOARD_TWINHAN_TU501:
- /* Power led off */
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.power_led, 0x01);
- msleep(15);
- break;
- case TM6010_BOARD_BEHOLD_WANDER:
- case TM6010_BOARD_BEHOLD_VOYAGER:
- case TM6010_BOARD_BEHOLD_WANDER_LITE:
- case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
- /* Power led off */
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.power_led, 0x00);
- msleep(15);
- break;
- }
- }
- tm6000_v4l2_unregister(dev);
-
- tm6000_i2c_unregister(dev);
-
- v4l2_device_unregister(&dev->v4l2_dev);
-
- dev->state |= DEV_DISCONNECTED;
-
- usb_put_dev(dev->udev);
-
- tm6000_close_extension(dev);
- tm6000_remove_from_devlist(dev);
-
- clear_bit(dev->devno, &tm6000_devused);
- kfree(dev);
-}
-
-static struct usb_driver tm6000_usb_driver = {
- .name = "tm6000",
- .probe = tm6000_usb_probe,
- .disconnect = tm6000_usb_disconnect,
- .id_table = tm6000_id_table,
-};
-
-module_usb_driver(tm6000_usb_driver);
-
-MODULE_DESCRIPTION("Trident TVMaster TM5600/TM6000/TM6010 USB2 adapter");
-MODULE_AUTHOR("Mauro Carvalho Chehab");
-MODULE_LICENSE("GPL v2");
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-// tm6000-core.c - driver for TM5600/TM6000/TM6010 USB video capture devices
-//
-// Copyright (c) 2006-2007 Mauro Carvalho Chehab <mchehab@kernel.org>
-//
-// Copyright (c) 2007 Michel Ludwig <michel.ludwig@gmail.com>
-// - DVB-T support
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/usb.h>
-#include <linux/i2c.h>
-#include "tm6000.h"
-#include "tm6000-regs.h"
-#include <media/v4l2-common.h>
-#include <media/tuner.h>
-
-#define USB_TIMEOUT (5 * HZ) /* ms */
-
-int tm6000_read_write_usb(struct tm6000_core *dev, u8 req_type, u8 req,
- u16 value, u16 index, u8 *buf, u16 len)
-{
- int ret, i;
- unsigned int pipe;
- u8 *data = NULL;
- int delay = 5000;
-
- if (len) {
- data = kzalloc(len, GFP_KERNEL);
- if (!data)
- return -ENOMEM;
- }
-
- mutex_lock(&dev->usb_lock);
-
- if (req_type & USB_DIR_IN)
- pipe = usb_rcvctrlpipe(dev->udev, 0);
- else {
- pipe = usb_sndctrlpipe(dev->udev, 0);
- memcpy(data, buf, len);
- }
-
- if (tm6000_debug & V4L2_DEBUG_I2C) {
- printk(KERN_DEBUG "(dev %p, pipe %08x): ", dev->udev, pipe);
-
- printk(KERN_CONT "%s: %02x %02x %02x %02x %02x %02x %02x %02x ",
- (req_type & USB_DIR_IN) ? " IN" : "OUT",
- req_type, req, value&0xff, value>>8, index&0xff,
- index>>8, len&0xff, len>>8);
-
- if (!(req_type & USB_DIR_IN)) {
- printk(KERN_CONT ">>> ");
- for (i = 0; i < len; i++)
- printk(KERN_CONT " %02x", buf[i]);
- printk(KERN_CONT "\n");
- }
- }
-
- ret = usb_control_msg(dev->udev, pipe, req, req_type, value, index,
- data, len, USB_TIMEOUT);
-
- if (req_type & USB_DIR_IN)
- memcpy(buf, data, len);
-
- if (tm6000_debug & V4L2_DEBUG_I2C) {
- if (ret < 0) {
- if (req_type & USB_DIR_IN)
- printk(KERN_DEBUG "<<< (len=%d)\n", len);
-
- printk(KERN_CONT "%s: Error #%d\n", __func__, ret);
- } else if (req_type & USB_DIR_IN) {
- printk(KERN_CONT "<<< ");
- for (i = 0; i < len; i++)
- printk(KERN_CONT " %02x", buf[i]);
- printk(KERN_CONT "\n");
- }
- }
-
- kfree(data);
-
- if (dev->quirks & TM6000_QUIRK_NO_USB_DELAY)
- delay = 0;
-
- if (req == REQ_16_SET_GET_I2C_WR1_RDN && !(req_type & USB_DIR_IN)) {
- unsigned int tsleep;
- /* Calculate delay time, 14000us for 64 bytes */
- tsleep = (len * 200) + 200;
- if (tsleep < delay)
- tsleep = delay;
- usleep_range(tsleep, tsleep + 1000);
- }
- else if (delay)
- usleep_range(delay, delay + 1000);
-
- mutex_unlock(&dev->usb_lock);
- return ret;
-}
-
-int tm6000_set_reg(struct tm6000_core *dev, u8 req, u16 value, u16 index)
-{
- return
- tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR,
- req, value, index, NULL, 0);
-}
-EXPORT_SYMBOL_GPL(tm6000_set_reg);
-
-int tm6000_get_reg(struct tm6000_core *dev, u8 req, u16 value, u16 index)
-{
- int rc;
- u8 buf[1];
-
- rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR, req,
- value, index, buf, 1);
-
- if (rc < 0)
- return rc;
-
- return *buf;
-}
-EXPORT_SYMBOL_GPL(tm6000_get_reg);
-
-int tm6000_set_reg_mask(struct tm6000_core *dev, u8 req, u16 value,
- u16 index, u16 mask)
-{
- int rc;
- u8 buf[1];
- u8 new_index;
-
- rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR, req,
- value, 0, buf, 1);
-
- if (rc < 0)
- return rc;
-
- new_index = (buf[0] & ~mask) | (index & mask);
-
- if (new_index == buf[0])
- return 0;
-
- return tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR,
- req, value, new_index, NULL, 0);
-}
-EXPORT_SYMBOL_GPL(tm6000_set_reg_mask);
-
-int tm6000_get_reg16(struct tm6000_core *dev, u8 req, u16 value, u16 index)
-{
- int rc;
- u8 buf[2];
-
- rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR, req,
- value, index, buf, 2);
-
- if (rc < 0)
- return rc;
-
- return buf[1]|buf[0]<<8;
-}
-
-int tm6000_get_reg32(struct tm6000_core *dev, u8 req, u16 value, u16 index)
-{
- int rc;
- u8 buf[4];
-
- rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR, req,
- value, index, buf, 4);
-
- if (rc < 0)
- return rc;
-
- return buf[3] | buf[2] << 8 | buf[1] << 16 | buf[0] << 24;
-}
-
-int tm6000_i2c_reset(struct tm6000_core *dev, u16 tsleep)
-{
- int rc;
-
- rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_CLK, 0);
- if (rc < 0)
- return rc;
-
- msleep(tsleep);
-
- rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_CLK, 1);
- msleep(tsleep);
-
- return rc;
-}
-
-void tm6000_set_fourcc_format(struct tm6000_core *dev)
-{
- if (dev->dev_type == TM6010) {
- int val;
-
- val = tm6000_get_reg(dev, TM6010_REQ07_RCC_ACTIVE_IF, 0) & 0xfc;
- if (dev->fourcc == V4L2_PIX_FMT_UYVY)
- tm6000_set_reg(dev, TM6010_REQ07_RCC_ACTIVE_IF, val);
- else
- tm6000_set_reg(dev, TM6010_REQ07_RCC_ACTIVE_IF, val | 1);
- } else {
- if (dev->fourcc == V4L2_PIX_FMT_UYVY)
- tm6000_set_reg(dev, TM6010_REQ07_RC1_TRESHOLD, 0xd0);
- else
- tm6000_set_reg(dev, TM6010_REQ07_RC1_TRESHOLD, 0x90);
- }
-}
-
-static void tm6000_set_vbi(struct tm6000_core *dev)
-{
- /*
- * FIXME:
- * VBI lines and start/end are different between 60Hz and 50Hz
- * So, it is very likely that we need to change the config to
- * something that takes it into account, doing something different
- * if (dev->norm & V4L2_STD_525_60)
- */
-
- if (dev->dev_type == TM6010) {
- tm6000_set_reg(dev, TM6010_REQ07_R3F_RESET, 0x01);
- tm6000_set_reg(dev, TM6010_REQ07_R41_TELETEXT_VBI_CODE1, 0x27);
- tm6000_set_reg(dev, TM6010_REQ07_R42_VBI_DATA_HIGH_LEVEL, 0x55);
- tm6000_set_reg(dev, TM6010_REQ07_R43_VBI_DATA_TYPE_LINE7, 0x66);
- tm6000_set_reg(dev, TM6010_REQ07_R44_VBI_DATA_TYPE_LINE8, 0x66);
- tm6000_set_reg(dev, TM6010_REQ07_R45_VBI_DATA_TYPE_LINE9, 0x66);
- tm6000_set_reg(dev,
- TM6010_REQ07_R46_VBI_DATA_TYPE_LINE10, 0x66);
- tm6000_set_reg(dev,
- TM6010_REQ07_R47_VBI_DATA_TYPE_LINE11, 0x66);
- tm6000_set_reg(dev,
- TM6010_REQ07_R48_VBI_DATA_TYPE_LINE12, 0x66);
- tm6000_set_reg(dev,
- TM6010_REQ07_R49_VBI_DATA_TYPE_LINE13, 0x66);
- tm6000_set_reg(dev,
- TM6010_REQ07_R4A_VBI_DATA_TYPE_LINE14, 0x66);
- tm6000_set_reg(dev,
- TM6010_REQ07_R4B_VBI_DATA_TYPE_LINE15, 0x66);
- tm6000_set_reg(dev,
- TM6010_REQ07_R4C_VBI_DATA_TYPE_LINE16, 0x66);
- tm6000_set_reg(dev,
- TM6010_REQ07_R4D_VBI_DATA_TYPE_LINE17, 0x66);
- tm6000_set_reg(dev,
- TM6010_REQ07_R4E_VBI_DATA_TYPE_LINE18, 0x66);
- tm6000_set_reg(dev,
- TM6010_REQ07_R4F_VBI_DATA_TYPE_LINE19, 0x66);
- tm6000_set_reg(dev,
- TM6010_REQ07_R50_VBI_DATA_TYPE_LINE20, 0x66);
- tm6000_set_reg(dev,
- TM6010_REQ07_R51_VBI_DATA_TYPE_LINE21, 0x66);
- tm6000_set_reg(dev,
- TM6010_REQ07_R52_VBI_DATA_TYPE_LINE22, 0x66);
- tm6000_set_reg(dev,
- TM6010_REQ07_R53_VBI_DATA_TYPE_LINE23, 0x00);
- tm6000_set_reg(dev,
- TM6010_REQ07_R54_VBI_DATA_TYPE_RLINES, 0x00);
- tm6000_set_reg(dev,
- TM6010_REQ07_R55_VBI_LOOP_FILTER_GAIN, 0x01);
- tm6000_set_reg(dev,
- TM6010_REQ07_R56_VBI_LOOP_FILTER_I_GAIN, 0x00);
- tm6000_set_reg(dev,
- TM6010_REQ07_R57_VBI_LOOP_FILTER_P_GAIN, 0x02);
- tm6000_set_reg(dev, TM6010_REQ07_R58_VBI_CAPTION_DTO1, 0x35);
- tm6000_set_reg(dev, TM6010_REQ07_R59_VBI_CAPTION_DTO0, 0xa0);
- tm6000_set_reg(dev, TM6010_REQ07_R5A_VBI_TELETEXT_DTO1, 0x11);
- tm6000_set_reg(dev, TM6010_REQ07_R5B_VBI_TELETEXT_DTO0, 0x4c);
- tm6000_set_reg(dev, TM6010_REQ07_R40_TELETEXT_VBI_CODE0, 0x01);
- tm6000_set_reg(dev, TM6010_REQ07_R3F_RESET, 0x00);
- }
-}
-
-int tm6000_init_analog_mode(struct tm6000_core *dev)
-{
- struct v4l2_frequency f;
-
- if (dev->dev_type == TM6010) {
- u8 active = TM6010_REQ07_RCC_ACTIVE_IF_AUDIO_ENABLE;
-
- if (!dev->radio)
- active |= TM6010_REQ07_RCC_ACTIVE_IF_VIDEO_ENABLE;
-
- /* Enable video and audio */
- tm6000_set_reg_mask(dev, TM6010_REQ07_RCC_ACTIVE_IF,
- active, 0x60);
- /* Disable TS input */
- tm6000_set_reg_mask(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE,
- 0x00, 0x40);
- } else {
- /* Enables soft reset */
- tm6000_set_reg(dev, TM6010_REQ07_R3F_RESET, 0x01);
-
- if (dev->scaler)
- /* Disable Hfilter and Enable TS Drop err */
- tm6000_set_reg(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE, 0x20);
- else /* Enable Hfilter and disable TS Drop err */
- tm6000_set_reg(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE, 0x80);
-
- tm6000_set_reg(dev, TM6010_REQ07_RC3_HSTART1, 0x88);
- tm6000_set_reg(dev, TM6000_REQ07_RDA_CLK_SEL, 0x23);
- tm6000_set_reg(dev, TM6010_REQ07_RD1_ADDR_FOR_REQ1, 0xc0);
- tm6000_set_reg(dev, TM6010_REQ07_RD2_ADDR_FOR_REQ2, 0xd8);
- tm6000_set_reg(dev, TM6010_REQ07_RD6_ENDP_REQ1_REQ2, 0x06);
- tm6000_set_reg(dev, TM6000_REQ07_RDF_PWDOWN_ACLK, 0x1f);
-
- /* AP Software reset */
- tm6000_set_reg(dev, TM6010_REQ07_RFF_SOFT_RESET, 0x08);
- tm6000_set_reg(dev, TM6010_REQ07_RFF_SOFT_RESET, 0x00);
-
- tm6000_set_fourcc_format(dev);
-
- /* Disables soft reset */
- tm6000_set_reg(dev, TM6010_REQ07_R3F_RESET, 0x00);
- }
- msleep(20);
-
- /* Tuner firmware can now be loaded */
-
- /*
- * FIXME: This is a hack! xc3028 "sleeps" when no channel is detected
- * for more than a few seconds. Not sure why, as this behavior does
- * not happen on other devices with xc3028. So, I suspect that it
- * is yet another bug at tm6000. After start sleeping, decoding
- * doesn't start automatically. Instead, it requires some
- * I2C commands to wake it up. As we want to have image at the
- * beginning, we needed to add this hack. The better would be to
- * discover some way to make tm6000 to wake up without this hack.
- */
- f.frequency = dev->freq;
- v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
-
- msleep(100);
- tm6000_set_standard(dev);
- tm6000_set_vbi(dev);
- tm6000_set_audio_bitrate(dev, 48000);
-
- /* switch dvb led off */
- if (dev->gpio.dvb_led) {
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.dvb_led, 0x01);
- }
-
- return 0;
-}
-
-int tm6000_init_digital_mode(struct tm6000_core *dev)
-{
- if (dev->dev_type == TM6010) {
- /* Disable video and audio */
- tm6000_set_reg_mask(dev, TM6010_REQ07_RCC_ACTIVE_IF,
- 0x00, 0x60);
- /* Enable TS input */
- tm6000_set_reg_mask(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE,
- 0x40, 0x40);
- /* all power down, but not the digital data port */
- tm6000_set_reg(dev, TM6010_REQ07_RFE_POWER_DOWN, 0x28);
- tm6000_set_reg(dev, TM6010_REQ08_RE2_POWER_DOWN_CTRL1, 0xfc);
- tm6000_set_reg(dev, TM6010_REQ08_RE6_POWER_DOWN_CTRL2, 0xff);
- } else {
- tm6000_set_reg(dev, TM6010_REQ07_RFF_SOFT_RESET, 0x08);
- tm6000_set_reg(dev, TM6010_REQ07_RFF_SOFT_RESET, 0x00);
- tm6000_set_reg(dev, TM6010_REQ07_R3F_RESET, 0x01);
- tm6000_set_reg(dev, TM6000_REQ07_RDF_PWDOWN_ACLK, 0x08);
- tm6000_set_reg(dev, TM6000_REQ07_RE2_VADC_STATUS_CTL, 0x0c);
- tm6000_set_reg(dev, TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0xff);
- tm6000_set_reg(dev, TM6000_REQ07_REB_VADC_AADC_MODE, 0xd8);
- tm6000_set_reg(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE, 0x40);
- tm6000_set_reg(dev, TM6010_REQ07_RC1_TRESHOLD, 0xd0);
- tm6000_set_reg(dev, TM6010_REQ07_RC3_HSTART1, 0x09);
- tm6000_set_reg(dev, TM6000_REQ07_RDA_CLK_SEL, 0x37);
- tm6000_set_reg(dev, TM6010_REQ07_RD1_ADDR_FOR_REQ1, 0xd8);
- tm6000_set_reg(dev, TM6010_REQ07_RD2_ADDR_FOR_REQ2, 0xc0);
- tm6000_set_reg(dev, TM6010_REQ07_RD6_ENDP_REQ1_REQ2, 0x60);
-
- tm6000_set_reg(dev, TM6000_REQ07_RE2_VADC_STATUS_CTL, 0x0c);
- tm6000_set_reg(dev, TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0xff);
- tm6000_set_reg(dev, TM6000_REQ07_REB_VADC_AADC_MODE, 0x08);
- msleep(50);
-
- tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 0x0020, 0x00);
- msleep(50);
- tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 0x0020, 0x01);
- msleep(50);
- tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 0x0020, 0x00);
- msleep(100);
- }
-
- /* switch dvb led on */
- if (dev->gpio.dvb_led) {
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.dvb_led, 0x00);
- }
-
- return 0;
-}
-EXPORT_SYMBOL(tm6000_init_digital_mode);
-
-struct reg_init {
- u8 req;
- u8 reg;
- u8 val;
-};
-
-/* The meaning of those initializations are unknown */
-static struct reg_init tm6000_init_tab[] = {
- /* REG VALUE */
- { TM6000_REQ07_RDF_PWDOWN_ACLK, 0x1f },
- { TM6010_REQ07_RFF_SOFT_RESET, 0x08 },
- { TM6010_REQ07_RFF_SOFT_RESET, 0x00 },
- { TM6010_REQ07_RD5_POWERSAVE, 0x4f },
- { TM6000_REQ07_RDA_CLK_SEL, 0x23 },
- { TM6000_REQ07_RDB_OUT_SEL, 0x08 },
- { TM6000_REQ07_RE2_VADC_STATUS_CTL, 0x00 },
- { TM6000_REQ07_RE3_VADC_INP_LPF_SEL1, 0x10 },
- { TM6000_REQ07_RE5_VADC_INP_LPF_SEL2, 0x00 },
- { TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0x00 },
- { TM6000_REQ07_REB_VADC_AADC_MODE, 0x64 }, /* 48000 bits/sample, external input */
- { TM6000_REQ07_REE_VADC_CTRL_SEL_CONTROL, 0xc2 },
-
- { TM6010_REQ07_R3F_RESET, 0x01 }, /* Start of soft reset */
- { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x00 },
- { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x07 },
- { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
- { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x00 },
- { TM6010_REQ07_R05_NOISE_THRESHOLD, 0x64 },
- { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x01 },
- { TM6010_REQ07_R08_LUMA_CONTRAST_ADJ, 0x82 },
- { TM6010_REQ07_R09_LUMA_BRIGHTNESS_ADJ, 0x36 },
- { TM6010_REQ07_R0A_CHROMA_SATURATION_ADJ, 0x50 },
- { TM6010_REQ07_R0C_CHROMA_AGC_CONTROL, 0x6a },
- { TM6010_REQ07_R11_AGC_PEAK_CONTROL, 0xc9 },
- { TM6010_REQ07_R12_AGC_GATE_STARTH, 0x07 },
- { TM6010_REQ07_R13_AGC_GATE_STARTL, 0x3b },
- { TM6010_REQ07_R14_AGC_GATE_WIDTH, 0x47 },
- { TM6010_REQ07_R15_AGC_BP_DELAY, 0x6f },
- { TM6010_REQ07_R17_HLOOP_MAXSTATE, 0xcd },
- { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e },
- { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x8b },
- { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xa2 },
- { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe9 },
- { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
- { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
- { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
- { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
- { TM6010_REQ07_R20_HSYNC_RISING_EDGE_TIME, 0x3c },
- { TM6010_REQ07_R21_HSYNC_PHASE_OFFSET, 0x3c },
- { TM6010_REQ07_R2D_CHROMA_BURST_END, 0x48 },
- { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 },
- { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22 },
- { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61 },
- { TM6010_REQ07_R32_VSYNC_HLOCK_MIN, 0x74 },
- { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x1c },
- { TM6010_REQ07_R34_VSYNC_AGC_MIN, 0x74 },
- { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c },
- { TM6010_REQ07_R36_VSYNC_VBI_MIN, 0x7a },
- { TM6010_REQ07_R37_VSYNC_VBI_MAX, 0x26 },
- { TM6010_REQ07_R38_VSYNC_THRESHOLD, 0x40 },
- { TM6010_REQ07_R39_VSYNC_TIME_CONSTANT, 0x0a },
- { TM6010_REQ07_R42_VBI_DATA_HIGH_LEVEL, 0x55 },
- { TM6010_REQ07_R51_VBI_DATA_TYPE_LINE21, 0x11 },
- { TM6010_REQ07_R55_VBI_LOOP_FILTER_GAIN, 0x01 },
- { TM6010_REQ07_R57_VBI_LOOP_FILTER_P_GAIN, 0x02 },
- { TM6010_REQ07_R58_VBI_CAPTION_DTO1, 0x35 },
- { TM6010_REQ07_R59_VBI_CAPTION_DTO0, 0xa0 },
- { TM6010_REQ07_R80_COMB_FILTER_TRESHOLD, 0x15 },
- { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42 },
- { TM6010_REQ07_RC1_TRESHOLD, 0xd0 },
- { TM6010_REQ07_RC3_HSTART1, 0x88 },
- { TM6010_REQ07_R3F_RESET, 0x00 }, /* End of the soft reset */
- { TM6010_REQ05_R18_IMASK7, 0x00 },
-};
-
-static struct reg_init tm6010_init_tab[] = {
- { TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE, 0x00 },
- { TM6010_REQ07_RC4_HSTART0, 0xa0 },
- { TM6010_REQ07_RC6_HEND0, 0x40 },
- { TM6010_REQ07_RCA_VEND0, 0x31 },
- { TM6010_REQ07_RCC_ACTIVE_IF, 0xe1 },
- { TM6010_REQ07_RE0_DVIDEO_SOURCE, 0x03 },
- { TM6010_REQ07_RFE_POWER_DOWN, 0x7f },
-
- { TM6010_REQ08_RE2_POWER_DOWN_CTRL1, 0xf0 },
- { TM6010_REQ08_RE3_ADC_IN1_SEL, 0xf4 },
- { TM6010_REQ08_RE4_ADC_IN2_SEL, 0xf8 },
- { TM6010_REQ08_RE6_POWER_DOWN_CTRL2, 0x00 },
- { TM6010_REQ08_REA_BUFF_DRV_CTRL, 0xf2 },
- { TM6010_REQ08_REB_SIF_GAIN_CTRL, 0xf0 },
- { TM6010_REQ08_REC_REVERSE_YC_CTRL, 0xc2 },
- { TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG, 0x60 },
- { TM6010_REQ08_RF1_AADC_POWER_DOWN, 0xfc },
-
- { TM6010_REQ07_R3F_RESET, 0x01 },
- { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x00 },
- { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x07 },
- { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
- { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x00 },
- { TM6010_REQ07_R05_NOISE_THRESHOLD, 0x64 },
- { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x01 },
- { TM6010_REQ07_R08_LUMA_CONTRAST_ADJ, 0x82 },
- { TM6010_REQ07_R09_LUMA_BRIGHTNESS_ADJ, 0x36 },
- { TM6010_REQ07_R0A_CHROMA_SATURATION_ADJ, 0x50 },
- { TM6010_REQ07_R0C_CHROMA_AGC_CONTROL, 0x6a },
- { TM6010_REQ07_R11_AGC_PEAK_CONTROL, 0xc9 },
- { TM6010_REQ07_R12_AGC_GATE_STARTH, 0x07 },
- { TM6010_REQ07_R13_AGC_GATE_STARTL, 0x3b },
- { TM6010_REQ07_R14_AGC_GATE_WIDTH, 0x47 },
- { TM6010_REQ07_R15_AGC_BP_DELAY, 0x6f },
- { TM6010_REQ07_R17_HLOOP_MAXSTATE, 0xcd },
- { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e },
- { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x8b },
- { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xa2 },
- { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe9 },
- { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
- { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
- { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
- { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
- { TM6010_REQ07_R20_HSYNC_RISING_EDGE_TIME, 0x3c },
- { TM6010_REQ07_R21_HSYNC_PHASE_OFFSET, 0x3c },
- { TM6010_REQ07_R2D_CHROMA_BURST_END, 0x48 },
- { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 },
- { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22 },
- { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61 },
- { TM6010_REQ07_R32_VSYNC_HLOCK_MIN, 0x74 },
- { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x1c },
- { TM6010_REQ07_R34_VSYNC_AGC_MIN, 0x74 },
- { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c },
- { TM6010_REQ07_R36_VSYNC_VBI_MIN, 0x7a },
- { TM6010_REQ07_R37_VSYNC_VBI_MAX, 0x26 },
- { TM6010_REQ07_R38_VSYNC_THRESHOLD, 0x40 },
- { TM6010_REQ07_R39_VSYNC_TIME_CONSTANT, 0x0a },
- { TM6010_REQ07_R42_VBI_DATA_HIGH_LEVEL, 0x55 },
- { TM6010_REQ07_R51_VBI_DATA_TYPE_LINE21, 0x11 },
- { TM6010_REQ07_R55_VBI_LOOP_FILTER_GAIN, 0x01 },
- { TM6010_REQ07_R57_VBI_LOOP_FILTER_P_GAIN, 0x02 },
- { TM6010_REQ07_R58_VBI_CAPTION_DTO1, 0x35 },
- { TM6010_REQ07_R59_VBI_CAPTION_DTO0, 0xa0 },
- { TM6010_REQ07_R80_COMB_FILTER_TRESHOLD, 0x15 },
- { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42 },
- { TM6010_REQ07_RC1_TRESHOLD, 0xd0 },
- { TM6010_REQ07_RC3_HSTART1, 0x88 },
- { TM6010_REQ07_R3F_RESET, 0x00 },
-
- { TM6010_REQ05_R18_IMASK7, 0x00 },
-
- { TM6010_REQ07_RDC_IR_LEADER1, 0xaa },
- { TM6010_REQ07_RDD_IR_LEADER0, 0x30 },
- { TM6010_REQ07_RDE_IR_PULSE_CNT1, 0x20 },
- { TM6010_REQ07_RDF_IR_PULSE_CNT0, 0xd0 },
- { REQ_04_EN_DISABLE_MCU_INT, 0x02, 0x00 },
- { TM6010_REQ07_RD8_IR, 0x0f },
-
- /* set remote wakeup key:any key wakeup */
- { TM6010_REQ07_RE5_REMOTE_WAKEUP, 0xfe },
- { TM6010_REQ07_RDA_IR_WAKEUP_SEL, 0xff },
-};
-
-int tm6000_init(struct tm6000_core *dev)
-{
- int board, rc = 0, i, size;
- struct reg_init *tab;
-
- /* Check board revision */
- board = tm6000_get_reg32(dev, REQ_40_GET_VERSION, 0, 0);
- if (board >= 0) {
- switch (board & 0xff) {
- case 0xf3:
- printk(KERN_INFO "Found tm6000\n");
- if (dev->dev_type != TM6000)
- dev->dev_type = TM6000;
- break;
- case 0xf4:
- printk(KERN_INFO "Found tm6010\n");
- if (dev->dev_type != TM6010)
- dev->dev_type = TM6010;
- break;
- default:
- printk(KERN_INFO "Unknown board version = 0x%08x\n", board);
- }
- } else
- printk(KERN_ERR "Error %i while retrieving board version\n", board);
-
- if (dev->dev_type == TM6010) {
- tab = tm6010_init_tab;
- size = ARRAY_SIZE(tm6010_init_tab);
- } else {
- tab = tm6000_init_tab;
- size = ARRAY_SIZE(tm6000_init_tab);
- }
-
- /* Load board's initialization table */
- for (i = 0; i < size; i++) {
- rc = tm6000_set_reg(dev, tab[i].req, tab[i].reg, tab[i].val);
- if (rc < 0) {
- printk(KERN_ERR "Error %i while setting req %d, reg %d to value %d\n",
- rc,
- tab[i].req, tab[i].reg, tab[i].val);
- return rc;
- }
- }
-
- msleep(5); /* Just to be conservative */
-
- rc = tm6000_cards_setup(dev);
-
- return rc;
-}
-
-
-int tm6000_set_audio_bitrate(struct tm6000_core *dev, int bitrate)
-{
- int val = 0;
- u8 areg_f0 = 0x60; /* ADC MCLK = 250 Fs */
- u8 areg_0a = 0x91; /* SIF 48KHz */
-
- switch (bitrate) {
- case 48000:
- areg_f0 = 0x60; /* ADC MCLK = 250 Fs */
- areg_0a = 0x91; /* SIF 48KHz */
- dev->audio_bitrate = bitrate;
- break;
- case 32000:
- areg_f0 = 0x00; /* ADC MCLK = 375 Fs */
- areg_0a = 0x90; /* SIF 32KHz */
- dev->audio_bitrate = bitrate;
- break;
- default:
- return -EINVAL;
- }
-
-
- /* enable I2S, if we use sif or external I2S device */
- if (dev->dev_type == TM6010) {
- val = tm6000_set_reg(dev, TM6010_REQ08_R0A_A_I2S_MOD, areg_0a);
- if (val < 0)
- return val;
-
- val = tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG,
- areg_f0, 0xf0);
- if (val < 0)
- return val;
- } else {
- val = tm6000_set_reg_mask(dev, TM6000_REQ07_REB_VADC_AADC_MODE,
- areg_f0, 0xf0);
- if (val < 0)
- return val;
- }
- return 0;
-}
-EXPORT_SYMBOL_GPL(tm6000_set_audio_bitrate);
-
-int tm6000_set_audio_rinput(struct tm6000_core *dev)
-{
- if (dev->dev_type == TM6010) {
- /* Audio crossbar setting, default SIF1 */
- u8 areg_f0;
- u8 areg_07 = 0x10;
-
- switch (dev->rinput.amux) {
- case TM6000_AMUX_SIF1:
- case TM6000_AMUX_SIF2:
- areg_f0 = 0x03;
- areg_07 = 0x30;
- break;
- case TM6000_AMUX_ADC1:
- areg_f0 = 0x00;
- break;
- case TM6000_AMUX_ADC2:
- areg_f0 = 0x08;
- break;
- case TM6000_AMUX_I2S:
- areg_f0 = 0x04;
- break;
- default:
- printk(KERN_INFO "%s: audio input doesn't support\n",
- dev->name);
- return 0;
- break;
- }
- /* Set audio input crossbar */
- tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG,
- areg_f0, 0x0f);
- /* Mux overflow workaround */
- tm6000_set_reg_mask(dev, TM6010_REQ07_R07_OUTPUT_CONTROL,
- areg_07, 0xf0);
- } else {
- u8 areg_eb;
- /* Audio setting, default LINE1 */
- switch (dev->rinput.amux) {
- case TM6000_AMUX_ADC1:
- areg_eb = 0x00;
- break;
- case TM6000_AMUX_ADC2:
- areg_eb = 0x04;
- break;
- default:
- printk(KERN_INFO "%s: audio input doesn't support\n",
- dev->name);
- return 0;
- break;
- }
- /* Set audio input */
- tm6000_set_reg_mask(dev, TM6000_REQ07_REB_VADC_AADC_MODE,
- areg_eb, 0x0f);
- }
- return 0;
-}
-
-static void tm6010_set_mute_sif(struct tm6000_core *dev, u8 mute)
-{
- u8 mute_reg = 0;
-
- if (mute)
- mute_reg = 0x08;
-
- tm6000_set_reg_mask(dev, TM6010_REQ08_R0A_A_I2S_MOD, mute_reg, 0x08);
-}
-
-static void tm6010_set_mute_adc(struct tm6000_core *dev, u8 mute)
-{
- u8 mute_reg = 0;
-
- if (mute)
- mute_reg = 0x20;
-
- if (dev->dev_type == TM6010) {
- tm6000_set_reg_mask(dev, TM6010_REQ08_RF2_LEFT_CHANNEL_VOL,
- mute_reg, 0x20);
- tm6000_set_reg_mask(dev, TM6010_REQ08_RF3_RIGHT_CHANNEL_VOL,
- mute_reg, 0x20);
- } else {
- tm6000_set_reg_mask(dev, TM6000_REQ07_REC_VADC_AADC_LVOL,
- mute_reg, 0x20);
- tm6000_set_reg_mask(dev, TM6000_REQ07_RED_VADC_AADC_RVOL,
- mute_reg, 0x20);
- }
-}
-
-int tm6000_tvaudio_set_mute(struct tm6000_core *dev, u8 mute)
-{
- enum tm6000_mux mux;
-
- if (dev->radio)
- mux = dev->rinput.amux;
- else
- mux = dev->vinput[dev->input].amux;
-
- switch (mux) {
- case TM6000_AMUX_SIF1:
- case TM6000_AMUX_SIF2:
- if (dev->dev_type == TM6010)
- tm6010_set_mute_sif(dev, mute);
- else {
- printk(KERN_INFO "ERROR: TM5600 and TM6000 don't has SIF audio inputs. Please check the %s configuration.\n",
- dev->name);
- return -EINVAL;
- }
- break;
- case TM6000_AMUX_ADC1:
- case TM6000_AMUX_ADC2:
- tm6010_set_mute_adc(dev, mute);
- break;
- default:
- return -EINVAL;
- break;
- }
- return 0;
-}
-
-static void tm6010_set_volume_sif(struct tm6000_core *dev, int vol)
-{
- u8 vol_reg;
-
- vol_reg = vol & 0x0F;
-
- if (vol < 0)
- vol_reg |= 0x40;
-
- tm6000_set_reg(dev, TM6010_REQ08_R07_A_LEFT_VOL, vol_reg);
- tm6000_set_reg(dev, TM6010_REQ08_R08_A_RIGHT_VOL, vol_reg);
-}
-
-static void tm6010_set_volume_adc(struct tm6000_core *dev, int vol)
-{
- u8 vol_reg;
-
- vol_reg = (vol + 0x10) & 0x1f;
-
- if (dev->dev_type == TM6010) {
- tm6000_set_reg(dev, TM6010_REQ08_RF2_LEFT_CHANNEL_VOL, vol_reg);
- tm6000_set_reg(dev, TM6010_REQ08_RF3_RIGHT_CHANNEL_VOL, vol_reg);
- } else {
- tm6000_set_reg(dev, TM6000_REQ07_REC_VADC_AADC_LVOL, vol_reg);
- tm6000_set_reg(dev, TM6000_REQ07_RED_VADC_AADC_RVOL, vol_reg);
- }
-}
-
-void tm6000_set_volume(struct tm6000_core *dev, int vol)
-{
- enum tm6000_mux mux;
-
- if (dev->radio) {
- mux = dev->rinput.amux;
- vol += 8; /* Offset to 0 dB */
- } else
- mux = dev->vinput[dev->input].amux;
-
- switch (mux) {
- case TM6000_AMUX_SIF1:
- case TM6000_AMUX_SIF2:
- if (dev->dev_type == TM6010)
- tm6010_set_volume_sif(dev, vol);
- else
- printk(KERN_INFO "ERROR: TM5600 and TM6000 don't has SIF audio inputs. Please check the %s configuration.\n",
- dev->name);
- break;
- case TM6000_AMUX_ADC1:
- case TM6000_AMUX_ADC2:
- tm6010_set_volume_adc(dev, vol);
- break;
- default:
- break;
- }
-}
-
-static LIST_HEAD(tm6000_devlist);
-static DEFINE_MUTEX(tm6000_devlist_mutex);
-
-/*
- * tm6000_realease_resource()
- */
-
-void tm6000_remove_from_devlist(struct tm6000_core *dev)
-{
- mutex_lock(&tm6000_devlist_mutex);
- list_del(&dev->devlist);
- mutex_unlock(&tm6000_devlist_mutex);
-};
-
-void tm6000_add_into_devlist(struct tm6000_core *dev)
-{
- mutex_lock(&tm6000_devlist_mutex);
- list_add_tail(&dev->devlist, &tm6000_devlist);
- mutex_unlock(&tm6000_devlist_mutex);
-};
-
-/*
- * Extension interface
- */
-
-static LIST_HEAD(tm6000_extension_devlist);
-
-int tm6000_call_fillbuf(struct tm6000_core *dev, enum tm6000_ops_type type,
- char *buf, int size)
-{
- struct tm6000_ops *ops = NULL;
-
- /* FIXME: tm6000_extension_devlist_lock should be a spinlock */
-
- list_for_each_entry(ops, &tm6000_extension_devlist, next) {
- if (ops->fillbuf && ops->type == type)
- ops->fillbuf(dev, buf, size);
- }
-
- return 0;
-}
-
-int tm6000_register_extension(struct tm6000_ops *ops)
-{
- struct tm6000_core *dev = NULL;
-
- mutex_lock(&tm6000_devlist_mutex);
- list_add_tail(&ops->next, &tm6000_extension_devlist);
- list_for_each_entry(dev, &tm6000_devlist, devlist) {
- ops->init(dev);
- printk(KERN_INFO "%s: Initialized (%s) extension\n",
- dev->name, ops->name);
- }
- mutex_unlock(&tm6000_devlist_mutex);
- return 0;
-}
-EXPORT_SYMBOL(tm6000_register_extension);
-
-void tm6000_unregister_extension(struct tm6000_ops *ops)
-{
- struct tm6000_core *dev = NULL;
-
- mutex_lock(&tm6000_devlist_mutex);
- list_for_each_entry(dev, &tm6000_devlist, devlist)
- ops->fini(dev);
-
- printk(KERN_INFO "tm6000: Remove (%s) extension\n", ops->name);
- list_del(&ops->next);
- mutex_unlock(&tm6000_devlist_mutex);
-}
-EXPORT_SYMBOL(tm6000_unregister_extension);
-
-void tm6000_init_extension(struct tm6000_core *dev)
-{
- struct tm6000_ops *ops = NULL;
-
- mutex_lock(&tm6000_devlist_mutex);
- list_for_each_entry(ops, &tm6000_extension_devlist, next) {
- if (ops->init)
- ops->init(dev);
- }
- mutex_unlock(&tm6000_devlist_mutex);
-}
-
-void tm6000_close_extension(struct tm6000_core *dev)
-{
- struct tm6000_ops *ops = NULL;
-
- mutex_lock(&tm6000_devlist_mutex);
- list_for_each_entry(ops, &tm6000_extension_devlist, next) {
- if (ops->fini)
- ops->fini(dev);
- }
- mutex_unlock(&tm6000_devlist_mutex);
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * tm6000-dvb.c - dvb-t support for TM5600/TM6000/TM6010 USB video capture devices
- *
- * Copyright (C) 2007 Michel Ludwig <michel.ludwig@gmail.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/usb.h>
-
-#include "tm6000.h"
-#include "tm6000-regs.h"
-
-#include "zl10353.h"
-
-#include <media/tuner.h>
-
-#include "xc2028.h"
-#include "xc5000.h"
-
-MODULE_DESCRIPTION("DVB driver extension module for tm5600/6000/6010 based TV cards");
-MODULE_AUTHOR("Mauro Carvalho Chehab");
-MODULE_LICENSE("GPL");
-
-static int debug;
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "enable debug message");
-
-static inline void print_err_status(struct tm6000_core *dev,
- int packet, int status)
-{
- char *errmsg = "Unknown";
-
- switch (status) {
- case -ENOENT:
- errmsg = "unlinked synchronously";
- break;
- case -ECONNRESET:
- errmsg = "unlinked asynchronously";
- break;
- case -ENOSR:
- errmsg = "Buffer error (overrun)";
- break;
- case -EPIPE:
- errmsg = "Stalled (device not responding)";
- break;
- case -EOVERFLOW:
- errmsg = "Babble (bad cable?)";
- break;
- case -EPROTO:
- errmsg = "Bit-stuff error (bad cable?)";
- break;
- case -EILSEQ:
- errmsg = "CRC/Timeout (could be anything)";
- break;
- case -ETIME:
- errmsg = "Device does not respond";
- break;
- }
- if (packet < 0) {
- dprintk(dev, 1, "URB status %d [%s].\n",
- status, errmsg);
- } else {
- dprintk(dev, 1, "URB packet %d, status %d [%s].\n",
- packet, status, errmsg);
- }
-}
-
-static void tm6000_urb_received(struct urb *urb)
-{
- int ret;
- struct tm6000_core *dev = urb->context;
-
- switch (urb->status) {
- case 0:
- case -ETIMEDOUT:
- break;
- case -ENOENT:
- case -ECONNRESET:
- case -ESHUTDOWN:
- return;
- default:
- print_err_status(dev, 0, urb->status);
- }
-
- if (urb->actual_length > 0)
- dvb_dmx_swfilter(&dev->dvb->demux, urb->transfer_buffer,
- urb->actual_length);
-
- if (dev->dvb->streams > 0) {
- ret = usb_submit_urb(urb, GFP_ATOMIC);
- if (ret < 0) {
- printk(KERN_ERR "tm6000: error %s\n", __func__);
- kfree(urb->transfer_buffer);
- usb_free_urb(urb);
- dev->dvb->bulk_urb = NULL;
- }
- }
-}
-
-static int tm6000_start_stream(struct tm6000_core *dev)
-{
- int ret;
- unsigned int pipe, size;
- struct tm6000_dvb *dvb = dev->dvb;
-
- printk(KERN_INFO "tm6000: got start stream request %s\n", __func__);
-
- if (dev->mode != TM6000_MODE_DIGITAL) {
- tm6000_init_digital_mode(dev);
- dev->mode = TM6000_MODE_DIGITAL;
- }
-
- dvb->bulk_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!dvb->bulk_urb)
- return -ENOMEM;
-
- pipe = usb_rcvbulkpipe(dev->udev, dev->bulk_in.endp->desc.bEndpointAddress
- & USB_ENDPOINT_NUMBER_MASK);
-
- size = usb_maxpacket(dev->udev, pipe);
- size = size * 15; /* 512 x 8 or 12 or 15 */
-
- dvb->bulk_urb->transfer_buffer = kzalloc(size, GFP_KERNEL);
- if (!dvb->bulk_urb->transfer_buffer) {
- usb_free_urb(dvb->bulk_urb);
- dvb->bulk_urb = NULL;
- return -ENOMEM;
- }
-
- usb_fill_bulk_urb(dvb->bulk_urb, dev->udev, pipe,
- dvb->bulk_urb->transfer_buffer,
- size,
- tm6000_urb_received, dev);
-
- ret = usb_clear_halt(dev->udev, pipe);
- if (ret < 0) {
- printk(KERN_ERR "tm6000: error %i in %s during pipe reset\n",
- ret, __func__);
-
- kfree(dvb->bulk_urb->transfer_buffer);
- usb_free_urb(dvb->bulk_urb);
- dvb->bulk_urb = NULL;
- return ret;
- } else
- printk(KERN_ERR "tm6000: pipe reset\n");
-
-/* mutex_lock(&tm6000_driver.open_close_mutex); */
- ret = usb_submit_urb(dvb->bulk_urb, GFP_ATOMIC);
-
-/* mutex_unlock(&tm6000_driver.open_close_mutex); */
- if (ret) {
- printk(KERN_ERR "tm6000: submit of urb failed (error=%i)\n",
- ret);
-
- kfree(dvb->bulk_urb->transfer_buffer);
- usb_free_urb(dvb->bulk_urb);
- dvb->bulk_urb = NULL;
- return ret;
- }
-
- return 0;
-}
-
-static void tm6000_stop_stream(struct tm6000_core *dev)
-{
- struct tm6000_dvb *dvb = dev->dvb;
-
- if (dvb->bulk_urb) {
- printk(KERN_INFO "urb killing\n");
- usb_kill_urb(dvb->bulk_urb);
- printk(KERN_INFO "urb buffer free\n");
- kfree(dvb->bulk_urb->transfer_buffer);
- usb_free_urb(dvb->bulk_urb);
- dvb->bulk_urb = NULL;
- }
-}
-
-static int tm6000_start_feed(struct dvb_demux_feed *feed)
-{
- struct dvb_demux *demux = feed->demux;
- struct tm6000_core *dev = demux->priv;
- struct tm6000_dvb *dvb = dev->dvb;
- printk(KERN_INFO "tm6000: got start feed request %s\n", __func__);
-
- mutex_lock(&dvb->mutex);
- if (dvb->streams == 0) {
- dvb->streams = 1;
-/* mutex_init(&tm6000_dev->streming_mutex); */
- tm6000_start_stream(dev);
- } else
- ++(dvb->streams);
- mutex_unlock(&dvb->mutex);
-
- return 0;
-}
-
-static int tm6000_stop_feed(struct dvb_demux_feed *feed)
-{
- struct dvb_demux *demux = feed->demux;
- struct tm6000_core *dev = demux->priv;
- struct tm6000_dvb *dvb = dev->dvb;
-
- printk(KERN_INFO "tm6000: got stop feed request %s\n", __func__);
-
- mutex_lock(&dvb->mutex);
-
- printk(KERN_INFO "stream %#x\n", dvb->streams);
- --(dvb->streams);
- if (dvb->streams == 0) {
- printk(KERN_INFO "stop stream\n");
- tm6000_stop_stream(dev);
-/* mutex_destroy(&tm6000_dev->streaming_mutex); */
- }
- mutex_unlock(&dvb->mutex);
-/* mutex_destroy(&tm6000_dev->streaming_mutex); */
-
- return 0;
-}
-
-static int tm6000_dvb_attach_frontend(struct tm6000_core *dev)
-{
- struct tm6000_dvb *dvb = dev->dvb;
-
- if (dev->caps.has_zl10353) {
- struct zl10353_config config = {
- .demod_address = dev->demod_addr,
- .no_tuner = 1,
- .parallel_ts = 1,
- .if2 = 45700,
- .disable_i2c_gate_ctrl = 1,
- };
-
- dvb->frontend = dvb_attach(zl10353_attach, &config,
- &dev->i2c_adap);
- } else {
- printk(KERN_ERR "tm6000: no frontend defined for the device!\n");
- return -1;
- }
-
- return (!dvb->frontend) ? -1 : 0;
-}
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-static int register_dvb(struct tm6000_core *dev)
-{
- int ret = -1;
- struct tm6000_dvb *dvb = dev->dvb;
-
- mutex_init(&dvb->mutex);
-
- dvb->streams = 0;
-
- /* attach the frontend */
- ret = tm6000_dvb_attach_frontend(dev);
- if (ret < 0) {
- printk(KERN_ERR "tm6000: couldn't attach the frontend!\n");
- goto err;
- }
-
- ret = dvb_register_adapter(&dvb->adapter, "Trident TVMaster 6000 DVB-T",
- THIS_MODULE, &dev->udev->dev, adapter_nr);
- if (ret < 0) {
- pr_err("tm6000: couldn't register the adapter!\n");
- goto err;
- }
-
- dvb->adapter.priv = dev;
-
- if (dvb->frontend) {
- switch (dev->tuner_type) {
- case TUNER_XC2028: {
- struct xc2028_config cfg = {
- .i2c_adap = &dev->i2c_adap,
- .i2c_addr = dev->tuner_addr,
- };
-
- dvb->frontend->callback = tm6000_tuner_callback;
- ret = dvb_register_frontend(&dvb->adapter, dvb->frontend);
- if (ret < 0) {
- printk(KERN_ERR
- "tm6000: couldn't register frontend\n");
- goto adapter_err;
- }
-
- if (!dvb_attach(xc2028_attach, dvb->frontend, &cfg)) {
- printk(KERN_ERR "tm6000: couldn't register frontend (xc3028)\n");
- ret = -EINVAL;
- goto frontend_err;
- }
- printk(KERN_INFO "tm6000: XC2028/3028 asked to be attached to frontend!\n");
- break;
- }
- case TUNER_XC5000: {
- struct xc5000_config cfg = {
- .i2c_address = dev->tuner_addr,
- };
-
- dvb->frontend->callback = tm6000_xc5000_callback;
- ret = dvb_register_frontend(&dvb->adapter, dvb->frontend);
- if (ret < 0) {
- printk(KERN_ERR
- "tm6000: couldn't register frontend\n");
- goto adapter_err;
- }
-
- if (!dvb_attach(xc5000_attach, dvb->frontend, &dev->i2c_adap, &cfg)) {
- printk(KERN_ERR "tm6000: couldn't register frontend (xc5000)\n");
- ret = -EINVAL;
- goto frontend_err;
- }
- printk(KERN_INFO "tm6000: XC5000 asked to be attached to frontend!\n");
- break;
- }
- }
- } else
- printk(KERN_ERR "tm6000: no frontend found\n");
-
- dvb->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING
- | DMX_MEMORY_BASED_FILTERING;
- dvb->demux.priv = dev;
- dvb->demux.filternum = 8;
- dvb->demux.feednum = 8;
- dvb->demux.start_feed = tm6000_start_feed;
- dvb->demux.stop_feed = tm6000_stop_feed;
- dvb->demux.write_to_decoder = NULL;
- ret = dvb_dmx_init(&dvb->demux);
- if (ret < 0) {
- printk(KERN_ERR "tm6000: dvb_dmx_init failed (errno = %d)\n", ret);
- goto frontend_err;
- }
-
- dvb->dmxdev.filternum = dev->dvb->demux.filternum;
- dvb->dmxdev.demux = &dev->dvb->demux.dmx;
- dvb->dmxdev.capabilities = 0;
-
- ret = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter);
- if (ret < 0) {
- printk(KERN_ERR "tm6000: dvb_dmxdev_init failed (errno = %d)\n", ret);
- goto dvb_dmx_err;
- }
-
- return 0;
-
-dvb_dmx_err:
- dvb_dmx_release(&dvb->demux);
-frontend_err:
- if (dvb->frontend) {
- dvb_unregister_frontend(dvb->frontend);
- dvb_frontend_detach(dvb->frontend);
- }
-adapter_err:
- dvb_unregister_adapter(&dvb->adapter);
-err:
- return ret;
-}
-
-static void unregister_dvb(struct tm6000_core *dev)
-{
- struct tm6000_dvb *dvb = dev->dvb;
-
- if (dvb->bulk_urb) {
- struct urb *bulk_urb = dvb->bulk_urb;
-
- kfree(bulk_urb->transfer_buffer);
- bulk_urb->transfer_buffer = NULL;
- usb_unlink_urb(bulk_urb);
- usb_free_urb(bulk_urb);
- }
-
-/* mutex_lock(&tm6000_driver.open_close_mutex); */
- if (dvb->frontend) {
- dvb_unregister_frontend(dvb->frontend);
- dvb_frontend_detach(dvb->frontend);
- }
-
- dvb_dmxdev_release(&dvb->dmxdev);
- dvb_dmx_release(&dvb->demux);
- dvb_unregister_adapter(&dvb->adapter);
- mutex_destroy(&dvb->mutex);
-/* mutex_unlock(&tm6000_driver.open_close_mutex); */
-}
-
-static int dvb_init(struct tm6000_core *dev)
-{
- struct tm6000_dvb *dvb;
- int rc;
-
- if (!dev)
- return 0;
-
- if (!dev->caps.has_dvb)
- return 0;
-
- if (dev->udev->speed == USB_SPEED_FULL) {
- printk(KERN_INFO "This USB2.0 device cannot be run on a USB1.1 port. (it lacks a hardware PID filter)\n");
- return 0;
- }
-
- dvb = kzalloc(sizeof(struct tm6000_dvb), GFP_KERNEL);
- if (!dvb)
- return -ENOMEM;
-
- dev->dvb = dvb;
-
- rc = register_dvb(dev);
- if (rc < 0) {
- kfree(dvb);
- dev->dvb = NULL;
- return 0;
- }
-
- return 0;
-}
-
-static int dvb_fini(struct tm6000_core *dev)
-{
- if (!dev)
- return 0;
-
- if (!dev->caps.has_dvb)
- return 0;
-
- if (dev->dvb) {
- unregister_dvb(dev);
- kfree(dev->dvb);
- dev->dvb = NULL;
- }
-
- return 0;
-}
-
-static struct tm6000_ops dvb_ops = {
- .type = TM6000_DVB,
- .name = "TM6000 dvb Extension",
- .init = dvb_init,
- .fini = dvb_fini,
-};
-
-static int __init tm6000_dvb_register(void)
-{
- return tm6000_register_extension(&dvb_ops);
-}
-
-static void __exit tm6000_dvb_unregister(void)
-{
- tm6000_unregister_extension(&dvb_ops);
-}
-
-module_init(tm6000_dvb_register);
-module_exit(tm6000_dvb_unregister);
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-// tm6000-i2c.c - driver for TM5600/TM6000/TM6010 USB video capture devices
-//
-// Copyright (c) 2006-2007 Mauro Carvalho Chehab <mchehab@kernel.org>
-//
-// Copyright (c) 2007 Michel Ludwig <michel.ludwig@gmail.com>
-// - Fix SMBus Read Byte command
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/usb.h>
-#include <linux/i2c.h>
-
-#include "tm6000.h"
-#include "tm6000-regs.h"
-#include <media/v4l2-common.h>
-#include <media/tuner.h>
-#include "xc2028.h"
-
-
-/* ----------------------------------------------------------- */
-
-static unsigned int i2c_debug;
-module_param(i2c_debug, int, 0644);
-MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
-
-#define i2c_dprintk(lvl, fmt, args...) if (i2c_debug >= lvl) do { \
- printk(KERN_DEBUG "%s at %s: " fmt, \
- dev->name, __func__, ##args); } while (0)
-
-static int tm6000_i2c_send_regs(struct tm6000_core *dev, unsigned char addr,
- __u8 reg, char *buf, int len)
-{
- int rc;
- unsigned int i2c_packet_limit = 16;
-
- if (dev->dev_type == TM6010)
- i2c_packet_limit = 80;
-
- if (!buf)
- return -1;
-
- if (len < 1 || len > i2c_packet_limit) {
- printk(KERN_ERR "Incorrect length of i2c packet = %d, limit set to %d\n",
- len, i2c_packet_limit);
- return -1;
- }
-
- /* capture mutex */
- rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR |
- USB_RECIP_DEVICE, REQ_16_SET_GET_I2C_WR1_RDN,
- addr | reg << 8, 0, buf, len);
-
- if (rc < 0) {
- /* release mutex */
- return rc;
- }
-
- /* release mutex */
- return rc;
-}
-
-/* Generic read - doesn't work fine with 16bit registers */
-static int tm6000_i2c_recv_regs(struct tm6000_core *dev, unsigned char addr,
- __u8 reg, char *buf, int len)
-{
- int rc;
- u8 b[2];
- unsigned int i2c_packet_limit = 16;
-
- if (dev->dev_type == TM6010)
- i2c_packet_limit = 64;
-
- if (!buf)
- return -1;
-
- if (len < 1 || len > i2c_packet_limit) {
- printk(KERN_ERR "Incorrect length of i2c packet = %d, limit set to %d\n",
- len, i2c_packet_limit);
- return -1;
- }
-
- /* capture mutex */
- if ((dev->caps.has_zl10353) && (dev->demod_addr << 1 == addr) && (reg % 2 == 0)) {
- /*
- * Workaround an I2C bug when reading from zl10353
- */
- reg -= 1;
- len += 1;
-
- rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- REQ_16_SET_GET_I2C_WR1_RDN, addr | reg << 8, 0, b, len);
-
- *buf = b[1];
- } else {
- rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- REQ_16_SET_GET_I2C_WR1_RDN, addr | reg << 8, 0, buf, len);
- }
-
- /* release mutex */
- return rc;
-}
-
-/*
- * read from a 16bit register
- * for example xc2028, xc3028 or xc3028L
- */
-static int tm6000_i2c_recv_regs16(struct tm6000_core *dev, unsigned char addr,
- __u16 reg, char *buf, int len)
-{
- int rc;
- unsigned char ureg;
-
- if (!buf || len != 2)
- return -1;
-
- /* capture mutex */
- if (dev->dev_type == TM6010) {
- ureg = reg & 0xFF;
- rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR |
- USB_RECIP_DEVICE, REQ_16_SET_GET_I2C_WR1_RDN,
- addr | (reg & 0xFF00), 0, &ureg, 1);
-
- if (rc < 0) {
- /* release mutex */
- return rc;
- }
-
- rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR |
- USB_RECIP_DEVICE, REQ_35_AFTEK_TUNER_READ,
- reg, 0, buf, len);
- } else {
- rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR |
- USB_RECIP_DEVICE, REQ_14_SET_GET_I2C_WR2_RDN,
- addr, reg, buf, len);
- }
-
- /* release mutex */
- return rc;
-}
-
-static int tm6000_i2c_xfer(struct i2c_adapter *i2c_adap,
- struct i2c_msg msgs[], int num)
-{
- struct tm6000_core *dev = i2c_adap->algo_data;
- int addr, rc, i, byte;
-
- for (i = 0; i < num; i++) {
- addr = (msgs[i].addr << 1) & 0xff;
- i2c_dprintk(2, "%s %s addr=0x%x len=%d:",
- (msgs[i].flags & I2C_M_RD) ? "read" : "write",
- i == num - 1 ? "stop" : "nonstop", addr, msgs[i].len);
- if (msgs[i].flags & I2C_M_RD) {
- /* read request without preceding register selection */
- /*
- * The TM6000 only supports a read transaction
- * immediately after a 1 or 2 byte write to select
- * a register. We cannot fulfill this request.
- */
- i2c_dprintk(2, " read without preceding write not supported");
- rc = -EOPNOTSUPP;
- goto err;
- } else if (i + 1 < num && msgs[i].len <= 2 &&
- (msgs[i + 1].flags & I2C_M_RD) &&
- msgs[i].addr == msgs[i + 1].addr) {
- /* 1 or 2 byte write followed by a read */
- if (i2c_debug >= 2)
- for (byte = 0; byte < msgs[i].len; byte++)
- printk(KERN_CONT " %02x", msgs[i].buf[byte]);
- i2c_dprintk(2, "; joined to read %s len=%d:",
- i == num - 2 ? "stop" : "nonstop",
- msgs[i + 1].len);
-
- if (msgs[i].len == 2) {
- rc = tm6000_i2c_recv_regs16(dev, addr,
- msgs[i].buf[0] << 8 | msgs[i].buf[1],
- msgs[i + 1].buf, msgs[i + 1].len);
- } else {
- rc = tm6000_i2c_recv_regs(dev, addr, msgs[i].buf[0],
- msgs[i + 1].buf, msgs[i + 1].len);
- }
-
- i++;
-
- if (addr == dev->tuner_addr << 1) {
- tm6000_set_reg(dev, REQ_50_SET_START, 0, 0);
- tm6000_set_reg(dev, REQ_51_SET_STOP, 0, 0);
- }
- if (i2c_debug >= 2)
- for (byte = 0; byte < msgs[i].len; byte++)
- printk(KERN_CONT " %02x", msgs[i].buf[byte]);
- } else {
- /* write bytes */
- if (i2c_debug >= 2)
- for (byte = 0; byte < msgs[i].len; byte++)
- printk(KERN_CONT " %02x", msgs[i].buf[byte]);
- rc = tm6000_i2c_send_regs(dev, addr, msgs[i].buf[0],
- msgs[i].buf + 1, msgs[i].len - 1);
- }
- if (i2c_debug >= 2)
- printk(KERN_CONT "\n");
- if (rc < 0)
- goto err;
- }
-
- return num;
-err:
- i2c_dprintk(2, " ERROR: %i\n", rc);
- return rc;
-}
-
-static int tm6000_i2c_eeprom(struct tm6000_core *dev)
-{
- int i, rc;
- unsigned char *p = dev->eedata;
- unsigned char bytes[17];
-
- dev->i2c_client.addr = 0xa0 >> 1;
- dev->eedata_size = 0;
-
- bytes[16] = '\0';
- for (i = 0; i < sizeof(dev->eedata); ) {
- *p = i;
- rc = tm6000_i2c_recv_regs(dev, 0xa0, i, p, 1);
- if (rc < 1) {
- if (p == dev->eedata)
- goto noeeprom;
- else {
- printk(KERN_WARNING
- "%s: i2c eeprom read error (err=%d)\n",
- dev->name, rc);
- }
- return -EINVAL;
- }
- dev->eedata_size++;
- p++;
- if (0 == (i % 16))
- printk(KERN_INFO "%s: i2c eeprom %02x:", dev->name, i);
- printk(KERN_CONT " %02x", dev->eedata[i]);
- if ((dev->eedata[i] >= ' ') && (dev->eedata[i] <= 'z'))
- bytes[i%16] = dev->eedata[i];
- else
- bytes[i%16] = '.';
-
- i++;
-
- if (0 == (i % 16)) {
- bytes[16] = '\0';
- printk(KERN_CONT " %s\n", bytes);
- }
- }
- if (0 != (i%16)) {
- bytes[i%16] = '\0';
- for (i %= 16; i < 16; i++)
- printk(KERN_CONT " ");
- printk(KERN_CONT " %s\n", bytes);
- }
-
- return 0;
-
-noeeprom:
- printk(KERN_INFO "%s: Huh, no eeprom present (err=%d)?\n",
- dev->name, rc);
- return -EINVAL;
-}
-
-/* ----------------------------------------------------------- */
-
-/*
- * functionality()
- */
-static u32 functionality(struct i2c_adapter *adap)
-{
- return I2C_FUNC_SMBUS_EMUL;
-}
-
-static const struct i2c_algorithm tm6000_algo = {
- .master_xfer = tm6000_i2c_xfer,
- .functionality = functionality,
-};
-
-/* ----------------------------------------------------------- */
-
-/*
- * tm6000_i2c_register()
- * register i2c bus
- */
-int tm6000_i2c_register(struct tm6000_core *dev)
-{
- int rc;
-
- dev->i2c_adap.owner = THIS_MODULE;
- dev->i2c_adap.algo = &tm6000_algo;
- dev->i2c_adap.dev.parent = &dev->udev->dev;
- strscpy(dev->i2c_adap.name, dev->name, sizeof(dev->i2c_adap.name));
- dev->i2c_adap.algo_data = dev;
- i2c_set_adapdata(&dev->i2c_adap, &dev->v4l2_dev);
- rc = i2c_add_adapter(&dev->i2c_adap);
- if (rc)
- return rc;
-
- dev->i2c_client.adapter = &dev->i2c_adap;
- strscpy(dev->i2c_client.name, "tm6000 internal", I2C_NAME_SIZE);
- tm6000_i2c_eeprom(dev);
-
- return 0;
-}
-
-/*
- * tm6000_i2c_unregister()
- * unregister i2c_bus
- */
-int tm6000_i2c_unregister(struct tm6000_core *dev)
-{
- i2c_del_adapter(&dev->i2c_adap);
- return 0;
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * tm6000-input.c - driver for TM5600/TM6000/TM6010 USB video capture devices
- *
- * Copyright (C) 2010 Stefan Ringel <stefan.ringel@arcor.de>
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-
-#include <linux/input.h>
-#include <linux/usb.h>
-
-#include <media/rc-core.h>
-
-#include "tm6000.h"
-#include "tm6000-regs.h"
-
-static unsigned int ir_debug;
-module_param(ir_debug, int, 0644);
-MODULE_PARM_DESC(ir_debug, "debug message level");
-
-static unsigned int enable_ir = 1;
-module_param(enable_ir, int, 0644);
-MODULE_PARM_DESC(enable_ir, "enable ir (default is enable)");
-
-static unsigned int ir_clock_mhz = 12;
-module_param(ir_clock_mhz, int, 0644);
-MODULE_PARM_DESC(ir_clock_mhz, "ir clock, in MHz");
-
-#define URB_SUBMIT_DELAY 100 /* ms - Delay to submit an URB request on retrial and init */
-#define URB_INT_LED_DELAY 100 /* ms - Delay to turn led on again on int mode */
-
-#undef dprintk
-
-#define dprintk(level, fmt, arg...) do {\
- if (ir_debug >= level) \
- printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg); \
- } while (0)
-
-struct tm6000_ir_poll_result {
- u16 rc_data;
-};
-
-struct tm6000_IR {
- struct tm6000_core *dev;
- struct rc_dev *rc;
- char name[32];
- char phys[32];
-
- /* poll expernal decoder */
- int polling;
- struct delayed_work work;
- u8 wait:1;
- u8 pwled:2;
- u8 submit_urb:1;
- struct urb *int_urb;
-
- /* IR device properties */
- u64 rc_proto;
-};
-
-void tm6000_ir_wait(struct tm6000_core *dev, u8 state)
-{
- struct tm6000_IR *ir = dev->ir;
-
- if (!dev->ir)
- return;
-
- dprintk(2, "%s: %i\n",__func__, ir->wait);
-
- if (state)
- ir->wait = 1;
- else
- ir->wait = 0;
-}
-
-static int tm6000_ir_config(struct tm6000_IR *ir)
-{
- struct tm6000_core *dev = ir->dev;
- u32 pulse = 0, leader = 0;
-
- dprintk(2, "%s\n",__func__);
-
- /*
- * The IR decoder supports RC-5 or NEC, with a configurable timing.
- * The timing configuration there is not that accurate, as it uses
- * approximate values. The NEC spec mentions a 562.5 unit period,
- * and RC-5 uses a 888.8 period.
- * Currently, driver assumes a clock provided by a 12 MHz XTAL, but
- * a modprobe parameter can adjust it.
- * Adjustments are required for other timings.
- * It seems that the 900ms timing for NEC is used to detect a RC-5
- * IR, in order to discard such decoding
- */
-
- switch (ir->rc_proto) {
- case RC_PROTO_BIT_NEC:
- leader = 900; /* ms */
- pulse = 700; /* ms - the actual value would be 562 */
- break;
- default:
- case RC_PROTO_BIT_RC5:
- leader = 900; /* ms - from the NEC decoding */
- pulse = 1780; /* ms - The actual value would be 1776 */
- break;
- }
-
- pulse = ir_clock_mhz * pulse;
- leader = ir_clock_mhz * leader;
- if (ir->rc_proto == RC_PROTO_BIT_NEC)
- leader = leader | 0x8000;
-
- dprintk(2, "%s: %s, %d MHz, leader = 0x%04x, pulse = 0x%06x \n",
- __func__,
- (ir->rc_proto == RC_PROTO_BIT_NEC) ? "NEC" : "RC-5",
- ir_clock_mhz, leader, pulse);
-
- /* Remote WAKEUP = enable, normal mode, from IR decoder output */
- tm6000_set_reg(dev, TM6010_REQ07_RE5_REMOTE_WAKEUP, 0xfe);
-
- /* Enable IR reception on non-busrt mode */
- tm6000_set_reg(dev, TM6010_REQ07_RD8_IR, 0x2f);
-
- /* IR_WKUP_SEL = Low byte in decoded IR data */
- tm6000_set_reg(dev, TM6010_REQ07_RDA_IR_WAKEUP_SEL, 0xff);
- /* IR_WKU_ADD code */
- tm6000_set_reg(dev, TM6010_REQ07_RDB_IR_WAKEUP_ADD, 0xff);
-
- tm6000_set_reg(dev, TM6010_REQ07_RDC_IR_LEADER1, leader >> 8);
- tm6000_set_reg(dev, TM6010_REQ07_RDD_IR_LEADER0, leader);
-
- tm6000_set_reg(dev, TM6010_REQ07_RDE_IR_PULSE_CNT1, pulse >> 8);
- tm6000_set_reg(dev, TM6010_REQ07_RDF_IR_PULSE_CNT0, pulse);
-
- if (!ir->polling)
- tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 0);
- else
- tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 1);
- msleep(10);
-
- /* Shows that IR is working via the LED */
- tm6000_flash_led(dev, 0);
- msleep(100);
- tm6000_flash_led(dev, 1);
- ir->pwled = 1;
-
- return 0;
-}
-
-static void tm6000_ir_keydown(struct tm6000_IR *ir,
- const char *buf, unsigned int len)
-{
- u8 device, command;
- u32 scancode;
- enum rc_proto protocol;
-
- if (len < 1)
- return;
-
- command = buf[0];
- device = (len > 1 ? buf[1] : 0x0);
- switch (ir->rc_proto) {
- case RC_PROTO_BIT_RC5:
- protocol = RC_PROTO_RC5;
- scancode = RC_SCANCODE_RC5(device, command);
- break;
- case RC_PROTO_BIT_NEC:
- protocol = RC_PROTO_NEC;
- scancode = RC_SCANCODE_NEC(device, command);
- break;
- default:
- protocol = RC_PROTO_OTHER;
- scancode = RC_SCANCODE_OTHER(device << 8 | command);
- break;
- }
-
- dprintk(1, "%s, protocol: 0x%04x, scancode: 0x%08x\n",
- __func__, protocol, scancode);
- rc_keydown(ir->rc, protocol, scancode, 0);
-}
-
-static void tm6000_ir_urb_received(struct urb *urb)
-{
- struct tm6000_core *dev = urb->context;
- struct tm6000_IR *ir = dev->ir;
- char *buf;
-
- dprintk(2, "%s\n",__func__);
- if (urb->status < 0 || urb->actual_length <= 0) {
- printk(KERN_INFO "tm6000: IR URB failure: status: %i, length %i\n",
- urb->status, urb->actual_length);
- ir->submit_urb = 1;
- schedule_delayed_work(&ir->work, msecs_to_jiffies(URB_SUBMIT_DELAY));
- return;
- }
- buf = urb->transfer_buffer;
-
- if (ir_debug)
- print_hex_dump(KERN_DEBUG, "tm6000: IR data: ",
- DUMP_PREFIX_OFFSET,16, 1,
- buf, urb->actual_length, false);
-
- tm6000_ir_keydown(ir, urb->transfer_buffer, urb->actual_length);
-
- usb_submit_urb(urb, GFP_ATOMIC);
- /*
- * Flash the led. We can't do it here, as it is running on IRQ context.
- * So, use the scheduler to do it, in a few ms.
- */
- ir->pwled = 2;
- schedule_delayed_work(&ir->work, msecs_to_jiffies(10));
-}
-
-static void tm6000_ir_handle_key(struct work_struct *work)
-{
- struct tm6000_IR *ir = container_of(work, struct tm6000_IR, work.work);
- struct tm6000_core *dev = ir->dev;
- int rc;
- u8 buf[2];
-
- if (ir->wait)
- return;
-
- dprintk(3, "%s\n",__func__);
-
- rc = tm6000_read_write_usb(dev, USB_DIR_IN |
- USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- REQ_02_GET_IR_CODE, 0, 0, buf, 2);
- if (rc < 0)
- return;
-
- /* Check if something was read */
- if ((buf[0] & 0xff) == 0xff) {
- if (!ir->pwled) {
- tm6000_flash_led(dev, 1);
- ir->pwled = 1;
- }
- return;
- }
-
- tm6000_ir_keydown(ir, buf, rc);
- tm6000_flash_led(dev, 0);
- ir->pwled = 0;
-
- /* Re-schedule polling */
- schedule_delayed_work(&ir->work, msecs_to_jiffies(ir->polling));
-}
-
-static void tm6000_ir_int_work(struct work_struct *work)
-{
- struct tm6000_IR *ir = container_of(work, struct tm6000_IR, work.work);
- struct tm6000_core *dev = ir->dev;
- int rc;
-
- dprintk(3, "%s, submit_urb = %d, pwled = %d\n",__func__, ir->submit_urb,
- ir->pwled);
-
- if (ir->submit_urb) {
- dprintk(3, "Resubmit urb\n");
- tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 0);
-
- rc = usb_submit_urb(ir->int_urb, GFP_ATOMIC);
- if (rc < 0) {
- printk(KERN_ERR "tm6000: Can't submit an IR interrupt. Error %i\n",
- rc);
- /* Retry in 100 ms */
- schedule_delayed_work(&ir->work, msecs_to_jiffies(URB_SUBMIT_DELAY));
- return;
- }
- ir->submit_urb = 0;
- }
-
- /* Led is enabled only if USB submit doesn't fail */
- if (ir->pwled == 2) {
- tm6000_flash_led(dev, 0);
- ir->pwled = 0;
- schedule_delayed_work(&ir->work, msecs_to_jiffies(URB_INT_LED_DELAY));
- } else if (!ir->pwled) {
- tm6000_flash_led(dev, 1);
- ir->pwled = 1;
- }
-}
-
-static int tm6000_ir_start(struct rc_dev *rc)
-{
- struct tm6000_IR *ir = rc->priv;
-
- dprintk(2, "%s\n",__func__);
-
- schedule_delayed_work(&ir->work, 0);
-
- return 0;
-}
-
-static void tm6000_ir_stop(struct rc_dev *rc)
-{
- struct tm6000_IR *ir = rc->priv;
-
- dprintk(2, "%s\n",__func__);
-
- cancel_delayed_work_sync(&ir->work);
-}
-
-static int tm6000_ir_change_protocol(struct rc_dev *rc, u64 *rc_proto)
-{
- struct tm6000_IR *ir = rc->priv;
-
- if (!ir)
- return 0;
-
- dprintk(2, "%s\n",__func__);
-
- ir->rc_proto = *rc_proto;
-
- tm6000_ir_config(ir);
- /* TODO */
- return 0;
-}
-
-static int __tm6000_ir_int_start(struct rc_dev *rc)
-{
- struct tm6000_IR *ir = rc->priv;
- struct tm6000_core *dev;
- int pipe, size;
- int err = -ENOMEM;
-
- if (!ir)
- return -ENODEV;
- dev = ir->dev;
-
- dprintk(2, "%s\n",__func__);
-
- ir->int_urb = usb_alloc_urb(0, GFP_ATOMIC);
- if (!ir->int_urb)
- return -ENOMEM;
-
- pipe = usb_rcvintpipe(dev->udev,
- dev->int_in.endp->desc.bEndpointAddress
- & USB_ENDPOINT_NUMBER_MASK);
-
- size = usb_maxpacket(dev->udev, pipe);
- dprintk(1, "IR max size: %d\n", size);
-
- ir->int_urb->transfer_buffer = kzalloc(size, GFP_ATOMIC);
- if (!ir->int_urb->transfer_buffer) {
- usb_free_urb(ir->int_urb);
- return err;
- }
- dprintk(1, "int interval: %d\n", dev->int_in.endp->desc.bInterval);
-
- usb_fill_int_urb(ir->int_urb, dev->udev, pipe,
- ir->int_urb->transfer_buffer, size,
- tm6000_ir_urb_received, dev,
- dev->int_in.endp->desc.bInterval);
-
- ir->submit_urb = 1;
- schedule_delayed_work(&ir->work, msecs_to_jiffies(URB_SUBMIT_DELAY));
-
- return 0;
-}
-
-static void __tm6000_ir_int_stop(struct rc_dev *rc)
-{
- struct tm6000_IR *ir = rc->priv;
-
- if (!ir || !ir->int_urb)
- return;
-
- dprintk(2, "%s\n",__func__);
-
- usb_kill_urb(ir->int_urb);
- kfree(ir->int_urb->transfer_buffer);
- usb_free_urb(ir->int_urb);
- ir->int_urb = NULL;
-}
-
-int tm6000_ir_int_start(struct tm6000_core *dev)
-{
- struct tm6000_IR *ir = dev->ir;
-
- if (!ir)
- return 0;
-
- return __tm6000_ir_int_start(ir->rc);
-}
-
-void tm6000_ir_int_stop(struct tm6000_core *dev)
-{
- struct tm6000_IR *ir = dev->ir;
-
- if (!ir || !ir->rc)
- return;
-
- __tm6000_ir_int_stop(ir->rc);
-}
-
-int tm6000_ir_init(struct tm6000_core *dev)
-{
- struct tm6000_IR *ir;
- struct rc_dev *rc;
- int err = -ENOMEM;
- u64 rc_proto;
-
- if (!enable_ir)
- return -ENODEV;
-
- if (!dev->caps.has_remote)
- return 0;
-
- if (!dev->ir_codes)
- return 0;
-
- ir = kzalloc(sizeof(*ir), GFP_ATOMIC);
- rc = rc_allocate_device(RC_DRIVER_SCANCODE);
- if (!ir || !rc)
- goto out;
-
- dprintk(2, "%s\n", __func__);
-
- /* record handles to ourself */
- ir->dev = dev;
- dev->ir = ir;
- ir->rc = rc;
-
- /* input setup */
- rc->allowed_protocols = RC_PROTO_BIT_RC5 | RC_PROTO_BIT_NEC;
- /* Needed, in order to support NEC remotes with 24 or 32 bits */
- rc->scancode_mask = 0xffff;
- rc->priv = ir;
- rc->change_protocol = tm6000_ir_change_protocol;
- if (dev->int_in.endp) {
- rc->open = __tm6000_ir_int_start;
- rc->close = __tm6000_ir_int_stop;
- INIT_DELAYED_WORK(&ir->work, tm6000_ir_int_work);
- } else {
- rc->open = tm6000_ir_start;
- rc->close = tm6000_ir_stop;
- ir->polling = 50;
- INIT_DELAYED_WORK(&ir->work, tm6000_ir_handle_key);
- }
-
- snprintf(ir->name, sizeof(ir->name), "tm5600/60x0 IR (%s)",
- dev->name);
-
- usb_make_path(dev->udev, ir->phys, sizeof(ir->phys));
- strlcat(ir->phys, "/input0", sizeof(ir->phys));
-
- rc_proto = RC_PROTO_BIT_UNKNOWN;
- tm6000_ir_change_protocol(rc, &rc_proto);
-
- rc->device_name = ir->name;
- rc->input_phys = ir->phys;
- rc->input_id.bustype = BUS_USB;
- rc->input_id.version = 1;
- rc->input_id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
- rc->input_id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
- rc->map_name = dev->ir_codes;
- rc->driver_name = "tm6000";
- rc->dev.parent = &dev->udev->dev;
-
- /* ir register */
- err = rc_register_device(rc);
- if (err)
- goto out;
-
- return 0;
-
-out:
- dev->ir = NULL;
- rc_free_device(rc);
- kfree(ir);
- return err;
-}
-
-int tm6000_ir_fini(struct tm6000_core *dev)
-{
- struct tm6000_IR *ir = dev->ir;
-
- /* skip detach on non attached board */
-
- if (!ir)
- return 0;
-
- dprintk(2, "%s\n",__func__);
-
- if (!ir->polling)
- __tm6000_ir_int_stop(ir->rc);
-
- tm6000_ir_stop(ir->rc);
-
- /* Turn off the led */
- tm6000_flash_led(dev, 0);
- ir->pwled = 0;
-
- rc_unregister_device(ir->rc);
-
- kfree(ir);
- dev->ir = NULL;
-
- return 0;
-}
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * tm6000-regs.h - driver for TM5600/TM6000/TM6010 USB video capture devices
- *
- * Copyright (c) 2006-2007 Mauro Carvalho Chehab <mchehab@kernel.org>
- */
-
-/*
- * Define TV Master TM5600/TM6000/TM6010 Request codes
- */
-#define REQ_00_SET_IR_VALUE 0
-#define REQ_01_SET_WAKEUP_IRCODE 1
-#define REQ_02_GET_IR_CODE 2
-#define REQ_03_SET_GET_MCU_PIN 3
-#define REQ_04_EN_DISABLE_MCU_INT 4
-#define REQ_05_SET_GET_USBREG 5
- /* Write: RegNum, Value, 0 */
- /* Read : RegNum, Value, 1, RegStatus */
-#define REQ_06_SET_GET_USBREG_BIT 6
-#define REQ_07_SET_GET_AVREG 7
- /* Write: RegNum, Value, 0 */
- /* Read : RegNum, Value, 1, RegStatus */
-#define REQ_08_SET_GET_AVREG_BIT 8
-#define REQ_09_SET_GET_TUNER_FQ 9
-#define REQ_10_SET_TUNER_SYSTEM 10
-#define REQ_11_SET_EEPROM_ADDR 11
-#define REQ_12_SET_GET_EEPROMBYTE 12
-#define REQ_13_GET_EEPROM_SEQREAD 13
-#define REQ_14_SET_GET_I2C_WR2_RDN 14
-#define REQ_15_SET_GET_I2CBYTE 15
- /* Write: Subaddr, Slave Addr, value, 0 */
- /* Read : Subaddr, Slave Addr, value, 1 */
-#define REQ_16_SET_GET_I2C_WR1_RDN 16
- /* Subaddr, Slave Addr, 0, length */
-#define REQ_17_SET_GET_I2CFP 17
- /* Write: Slave Addr, register, value */
- /* Read : Slave Addr, register, 2, data */
-#define REQ_20_DATA_TRANSFER 20
-#define REQ_30_I2C_WRITE 30
-#define REQ_31_I2C_READ 31
-#define REQ_35_AFTEK_TUNER_READ 35
-#define REQ_40_GET_VERSION 40
-#define REQ_50_SET_START 50
-#define REQ_51_SET_STOP 51
-#define REQ_52_TRANSMIT_DATA 52
-#define REQ_53_SPI_INITIAL 53
-#define REQ_54_SPI_SETSTART 54
-#define REQ_55_SPI_INOUTDATA 55
-#define REQ_56_SPI_SETSTOP 56
-
-/*
- * Define TV Master TM5600/TM6000/TM6010 GPIO lines
- */
-
-#define TM6000_GPIO_CLK 0x101
-#define TM6000_GPIO_DATA 0x100
-
-#define TM6000_GPIO_1 0x102
-#define TM6000_GPIO_2 0x103
-#define TM6000_GPIO_3 0x104
-#define TM6000_GPIO_4 0x300
-#define TM6000_GPIO_5 0x301
-#define TM6000_GPIO_6 0x304
-#define TM6000_GPIO_7 0x305
-
-/* tm6010 defines GPIO with different values */
-#define TM6010_GPIO_0 0x0102
-#define TM6010_GPIO_1 0x0103
-#define TM6010_GPIO_2 0x0104
-#define TM6010_GPIO_3 0x0105
-#define TM6010_GPIO_4 0x0106
-#define TM6010_GPIO_5 0x0107
-#define TM6010_GPIO_6 0x0300
-#define TM6010_GPIO_7 0x0301
-#define TM6010_GPIO_9 0x0305
-/*
- * Define TV Master TM5600/TM6000/TM6010 URB message codes and length
- */
-
-enum {
- TM6000_URB_MSG_VIDEO = 1,
- TM6000_URB_MSG_AUDIO,
- TM6000_URB_MSG_VBI,
- TM6000_URB_MSG_PTS,
- TM6000_URB_MSG_ERR,
-};
-
-/* Define specific TM6000 Video decoder registers */
-#define TM6000_REQ07_RD8_TEST_SEL 0x07, 0xd8
-#define TM6000_REQ07_RD9_A_SIM_SEL 0x07, 0xd9
-#define TM6000_REQ07_RDA_CLK_SEL 0x07, 0xda
-#define TM6000_REQ07_RDB_OUT_SEL 0x07, 0xdb
-#define TM6000_REQ07_RDC_NSEL_I2S 0x07, 0xdc
-#define TM6000_REQ07_RDD_GPIO2_MDRV 0x07, 0xdd
-#define TM6000_REQ07_RDE_GPIO1_MDRV 0x07, 0xde
-#define TM6000_REQ07_RDF_PWDOWN_ACLK 0x07, 0xdf
-#define TM6000_REQ07_RE0_VADC_REF_CTL 0x07, 0xe0
-#define TM6000_REQ07_RE1_VADC_DACLIMP 0x07, 0xe1
-#define TM6000_REQ07_RE2_VADC_STATUS_CTL 0x07, 0xe2
-#define TM6000_REQ07_RE3_VADC_INP_LPF_SEL1 0x07, 0xe3
-#define TM6000_REQ07_RE4_VADC_TARGET1 0x07, 0xe4
-#define TM6000_REQ07_RE5_VADC_INP_LPF_SEL2 0x07, 0xe5
-#define TM6000_REQ07_RE6_VADC_TARGET2 0x07, 0xe6
-#define TM6000_REQ07_RE7_VADC_AGAIN_CTL 0x07, 0xe7
-#define TM6000_REQ07_RE8_VADC_PWDOWN_CTL 0x07, 0xe8
-#define TM6000_REQ07_RE9_VADC_INPUT_CTL1 0x07, 0xe9
-#define TM6000_REQ07_REA_VADC_INPUT_CTL2 0x07, 0xea
-#define TM6000_REQ07_REB_VADC_AADC_MODE 0x07, 0xeb
-#define TM6000_REQ07_REC_VADC_AADC_LVOL 0x07, 0xec
-#define TM6000_REQ07_RED_VADC_AADC_RVOL 0x07, 0xed
-#define TM6000_REQ07_REE_VADC_CTRL_SEL_CONTROL 0x07, 0xee
-#define TM6000_REQ07_REF_VADC_GAIN_MAP_CTL 0x07, 0xef
-#define TM6000_REQ07_RFD_BIST_ERR_VST_LOW 0x07, 0xfd
-#define TM6000_REQ07_RFE_BIST_ERR_VST_HIGH 0x07, 0xfe
-
-/* Define TM6000/TM6010 Video decoder registers */
-#define TM6010_REQ07_R00_VIDEO_CONTROL0 0x07, 0x00
-#define TM6010_REQ07_R01_VIDEO_CONTROL1 0x07, 0x01
-#define TM6010_REQ07_R02_VIDEO_CONTROL2 0x07, 0x02
-#define TM6010_REQ07_R03_YC_SEP_CONTROL 0x07, 0x03
-#define TM6010_REQ07_R04_LUMA_HAGC_CONTROL 0x07, 0x04
-#define TM6010_REQ07_R05_NOISE_THRESHOLD 0x07, 0x05
-#define TM6010_REQ07_R06_AGC_GATE_THRESHOLD 0x07, 0x06
-#define TM6010_REQ07_R07_OUTPUT_CONTROL 0x07, 0x07
-#define TM6010_REQ07_R08_LUMA_CONTRAST_ADJ 0x07, 0x08
-#define TM6010_REQ07_R09_LUMA_BRIGHTNESS_ADJ 0x07, 0x09
-#define TM6010_REQ07_R0A_CHROMA_SATURATION_ADJ 0x07, 0x0a
-#define TM6010_REQ07_R0B_CHROMA_HUE_PHASE_ADJ 0x07, 0x0b
-#define TM6010_REQ07_R0C_CHROMA_AGC_CONTROL 0x07, 0x0c
-#define TM6010_REQ07_R0D_CHROMA_KILL_LEVEL 0x07, 0x0d
-#define TM6010_REQ07_R0F_CHROMA_AUTO_POSITION 0x07, 0x0f
-#define TM6010_REQ07_R10_AGC_PEAK_NOMINAL 0x07, 0x10
-#define TM6010_REQ07_R11_AGC_PEAK_CONTROL 0x07, 0x11
-#define TM6010_REQ07_R12_AGC_GATE_STARTH 0x07, 0x12
-#define TM6010_REQ07_R13_AGC_GATE_STARTL 0x07, 0x13
-#define TM6010_REQ07_R14_AGC_GATE_WIDTH 0x07, 0x14
-#define TM6010_REQ07_R15_AGC_BP_DELAY 0x07, 0x15
-#define TM6010_REQ07_R16_LOCK_COUNT 0x07, 0x16
-#define TM6010_REQ07_R17_HLOOP_MAXSTATE 0x07, 0x17
-#define TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3 0x07, 0x18
-#define TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2 0x07, 0x19
-#define TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1 0x07, 0x1a
-#define TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0 0x07, 0x1b
-#define TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3 0x07, 0x1c
-#define TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2 0x07, 0x1d
-#define TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1 0x07, 0x1e
-#define TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0 0x07, 0x1f
-#define TM6010_REQ07_R20_HSYNC_RISING_EDGE_TIME 0x07, 0x20
-#define TM6010_REQ07_R21_HSYNC_PHASE_OFFSET 0x07, 0x21
-#define TM6010_REQ07_R22_HSYNC_PLL_START_TIME 0x07, 0x22
-#define TM6010_REQ07_R23_HSYNC_PLL_END_TIME 0x07, 0x23
-#define TM6010_REQ07_R24_HSYNC_TIP_START_TIME 0x07, 0x24
-#define TM6010_REQ07_R25_HSYNC_TIP_END_TIME 0x07, 0x25
-#define TM6010_REQ07_R26_HSYNC_RISING_EDGE_START 0x07, 0x26
-#define TM6010_REQ07_R27_HSYNC_RISING_EDGE_END 0x07, 0x27
-#define TM6010_REQ07_R28_BACKPORCH_START 0x07, 0x28
-#define TM6010_REQ07_R29_BACKPORCH_END 0x07, 0x29
-#define TM6010_REQ07_R2A_HSYNC_FILTER_START 0x07, 0x2a
-#define TM6010_REQ07_R2B_HSYNC_FILTER_END 0x07, 0x2b
-#define TM6010_REQ07_R2C_CHROMA_BURST_START 0x07, 0x2c
-#define TM6010_REQ07_R2D_CHROMA_BURST_END 0x07, 0x2d
-#define TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART 0x07, 0x2e
-#define TM6010_REQ07_R2F_ACTIVE_VIDEO_HWIDTH 0x07, 0x2f
-#define TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART 0x07, 0x30
-#define TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT 0x07, 0x31
-#define TM6010_REQ07_R32_VSYNC_HLOCK_MIN 0x07, 0x32
-#define TM6010_REQ07_R33_VSYNC_HLOCK_MAX 0x07, 0x33
-#define TM6010_REQ07_R34_VSYNC_AGC_MIN 0x07, 0x34
-#define TM6010_REQ07_R35_VSYNC_AGC_MAX 0x07, 0x35
-#define TM6010_REQ07_R36_VSYNC_VBI_MIN 0x07, 0x36
-#define TM6010_REQ07_R37_VSYNC_VBI_MAX 0x07, 0x37
-#define TM6010_REQ07_R38_VSYNC_THRESHOLD 0x07, 0x38
-#define TM6010_REQ07_R39_VSYNC_TIME_CONSTANT 0x07, 0x39
-#define TM6010_REQ07_R3A_STATUS1 0x07, 0x3a
-#define TM6010_REQ07_R3B_STATUS2 0x07, 0x3b
-#define TM6010_REQ07_R3C_STATUS3 0x07, 0x3c
-#define TM6010_REQ07_R3F_RESET 0x07, 0x3f
-#define TM6010_REQ07_R40_TELETEXT_VBI_CODE0 0x07, 0x40
-#define TM6010_REQ07_R41_TELETEXT_VBI_CODE1 0x07, 0x41
-#define TM6010_REQ07_R42_VBI_DATA_HIGH_LEVEL 0x07, 0x42
-#define TM6010_REQ07_R43_VBI_DATA_TYPE_LINE7 0x07, 0x43
-#define TM6010_REQ07_R44_VBI_DATA_TYPE_LINE8 0x07, 0x44
-#define TM6010_REQ07_R45_VBI_DATA_TYPE_LINE9 0x07, 0x45
-#define TM6010_REQ07_R46_VBI_DATA_TYPE_LINE10 0x07, 0x46
-#define TM6010_REQ07_R47_VBI_DATA_TYPE_LINE11 0x07, 0x47
-#define TM6010_REQ07_R48_VBI_DATA_TYPE_LINE12 0x07, 0x48
-#define TM6010_REQ07_R49_VBI_DATA_TYPE_LINE13 0x07, 0x49
-#define TM6010_REQ07_R4A_VBI_DATA_TYPE_LINE14 0x07, 0x4a
-#define TM6010_REQ07_R4B_VBI_DATA_TYPE_LINE15 0x07, 0x4b
-#define TM6010_REQ07_R4C_VBI_DATA_TYPE_LINE16 0x07, 0x4c
-#define TM6010_REQ07_R4D_VBI_DATA_TYPE_LINE17 0x07, 0x4d
-#define TM6010_REQ07_R4E_VBI_DATA_TYPE_LINE18 0x07, 0x4e
-#define TM6010_REQ07_R4F_VBI_DATA_TYPE_LINE19 0x07, 0x4f
-#define TM6010_REQ07_R50_VBI_DATA_TYPE_LINE20 0x07, 0x50
-#define TM6010_REQ07_R51_VBI_DATA_TYPE_LINE21 0x07, 0x51
-#define TM6010_REQ07_R52_VBI_DATA_TYPE_LINE22 0x07, 0x52
-#define TM6010_REQ07_R53_VBI_DATA_TYPE_LINE23 0x07, 0x53
-#define TM6010_REQ07_R54_VBI_DATA_TYPE_RLINES 0x07, 0x54
-#define TM6010_REQ07_R55_VBI_LOOP_FILTER_GAIN 0x07, 0x55
-#define TM6010_REQ07_R56_VBI_LOOP_FILTER_I_GAIN 0x07, 0x56
-#define TM6010_REQ07_R57_VBI_LOOP_FILTER_P_GAIN 0x07, 0x57
-#define TM6010_REQ07_R58_VBI_CAPTION_DTO1 0x07, 0x58
-#define TM6010_REQ07_R59_VBI_CAPTION_DTO0 0x07, 0x59
-#define TM6010_REQ07_R5A_VBI_TELETEXT_DTO1 0x07, 0x5a
-#define TM6010_REQ07_R5B_VBI_TELETEXT_DTO0 0x07, 0x5b
-#define TM6010_REQ07_R5C_VBI_WSS625_DTO1 0x07, 0x5c
-#define TM6010_REQ07_R5D_VBI_WSS625_DTO0 0x07, 0x5d
-#define TM6010_REQ07_R5E_VBI_CAPTION_FRAME_START 0x07, 0x5e
-#define TM6010_REQ07_R5F_VBI_WSS625_FRAME_START 0x07, 0x5f
-#define TM6010_REQ07_R60_TELETEXT_FRAME_START 0x07, 0x60
-#define TM6010_REQ07_R61_VBI_CCDATA1 0x07, 0x61
-#define TM6010_REQ07_R62_VBI_CCDATA2 0x07, 0x62
-#define TM6010_REQ07_R63_VBI_WSS625_DATA1 0x07, 0x63
-#define TM6010_REQ07_R64_VBI_WSS625_DATA2 0x07, 0x64
-#define TM6010_REQ07_R65_VBI_DATA_STATUS 0x07, 0x65
-#define TM6010_REQ07_R66_VBI_CAPTION_START 0x07, 0x66
-#define TM6010_REQ07_R67_VBI_WSS625_START 0x07, 0x67
-#define TM6010_REQ07_R68_VBI_TELETEXT_START 0x07, 0x68
-#define TM6010_REQ07_R70_HSYNC_DTO_INC_STATUS3 0x07, 0x70
-#define TM6010_REQ07_R71_HSYNC_DTO_INC_STATUS2 0x07, 0x71
-#define TM6010_REQ07_R72_HSYNC_DTO_INC_STATUS1 0x07, 0x72
-#define TM6010_REQ07_R73_HSYNC_DTO_INC_STATUS0 0x07, 0x73
-#define TM6010_REQ07_R74_CHROMA_DTO_INC_STATUS3 0x07, 0x74
-#define TM6010_REQ07_R75_CHROMA_DTO_INC_STATUS2 0x07, 0x75
-#define TM6010_REQ07_R76_CHROMA_DTO_INC_STATUS1 0x07, 0x76
-#define TM6010_REQ07_R77_CHROMA_DTO_INC_STATUS0 0x07, 0x77
-#define TM6010_REQ07_R78_AGC_AGAIN_STATUS 0x07, 0x78
-#define TM6010_REQ07_R79_AGC_DGAIN_STATUS 0x07, 0x79
-#define TM6010_REQ07_R7A_CHROMA_MAG_STATUS 0x07, 0x7a
-#define TM6010_REQ07_R7B_CHROMA_GAIN_STATUS1 0x07, 0x7b
-#define TM6010_REQ07_R7C_CHROMA_GAIN_STATUS0 0x07, 0x7c
-#define TM6010_REQ07_R7D_CORDIC_FREQ_STATUS 0x07, 0x7d
-#define TM6010_REQ07_R7F_STATUS_NOISE 0x07, 0x7f
-#define TM6010_REQ07_R80_COMB_FILTER_TRESHOLD 0x07, 0x80
-#define TM6010_REQ07_R82_COMB_FILTER_CONFIG 0x07, 0x82
-#define TM6010_REQ07_R83_CHROMA_LOCK_CONFIG 0x07, 0x83
-#define TM6010_REQ07_R84_NOISE_NTSC_C 0x07, 0x84
-#define TM6010_REQ07_R85_NOISE_PAL_C 0x07, 0x85
-#define TM6010_REQ07_R86_NOISE_PHASE_C 0x07, 0x86
-#define TM6010_REQ07_R87_NOISE_PHASE_Y 0x07, 0x87
-#define TM6010_REQ07_R8A_CHROMA_LOOPFILTER_STATE 0x07, 0x8a
-#define TM6010_REQ07_R8B_CHROMA_HRESAMPLER 0x07, 0x8b
-#define TM6010_REQ07_R8D_CPUMP_DELAY_ADJ 0x07, 0x8d
-#define TM6010_REQ07_R8E_CPUMP_ADJ 0x07, 0x8e
-#define TM6010_REQ07_R8F_CPUMP_DELAY 0x07, 0x8f
-
-/* Define TM6000/TM6010 Miscellaneous registers */
-#define TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE 0x07, 0xc0
-#define TM6010_REQ07_RC1_TRESHOLD 0x07, 0xc1
-#define TM6010_REQ07_RC2_HSYNC_WIDTH 0x07, 0xc2
-#define TM6010_REQ07_RC3_HSTART1 0x07, 0xc3
-#define TM6010_REQ07_RC4_HSTART0 0x07, 0xc4
-#define TM6010_REQ07_RC5_HEND1 0x07, 0xc5
-#define TM6010_REQ07_RC6_HEND0 0x07, 0xc6
-#define TM6010_REQ07_RC7_VSTART1 0x07, 0xc7
-#define TM6010_REQ07_RC8_VSTART0 0x07, 0xc8
-#define TM6010_REQ07_RC9_VEND1 0x07, 0xc9
-#define TM6010_REQ07_RCA_VEND0 0x07, 0xca
-#define TM6010_REQ07_RCB_DELAY 0x07, 0xcb
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RCC_ACTIVE_IF 0x07, 0xcc
-#define TM6010_REQ07_RCC_ACTIVE_IF_VIDEO_ENABLE (1 << 5)
-#define TM6010_REQ07_RCC_ACTIVE_IF_AUDIO_ENABLE (1 << 6)
-#define TM6010_REQ07_RD0_USB_PERIPHERY_CONTROL 0x07, 0xd0
-#define TM6010_REQ07_RD1_ADDR_FOR_REQ1 0x07, 0xd1
-#define TM6010_REQ07_RD2_ADDR_FOR_REQ2 0x07, 0xd2
-#define TM6010_REQ07_RD3_ADDR_FOR_REQ3 0x07, 0xd3
-#define TM6010_REQ07_RD4_ADDR_FOR_REQ4 0x07, 0xd4
-#define TM6010_REQ07_RD5_POWERSAVE 0x07, 0xd5
-#define TM6010_REQ07_RD6_ENDP_REQ1_REQ2 0x07, 0xd6
-#define TM6010_REQ07_RD7_ENDP_REQ3_REQ4 0x07, 0xd7
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RD8_IR 0x07, 0xd8
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RD9_IR_BSIZE 0x07, 0xd9
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RDA_IR_WAKEUP_SEL 0x07, 0xda
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RDB_IR_WAKEUP_ADD 0x07, 0xdb
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RDC_IR_LEADER1 0x07, 0xdc
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RDD_IR_LEADER0 0x07, 0xdd
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RDE_IR_PULSE_CNT1 0x07, 0xde
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RDF_IR_PULSE_CNT0 0x07, 0xdf
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RE0_DVIDEO_SOURCE 0x07, 0xe0
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RE0_DVIDEO_SOURCE_IF 0x07, 0xe1
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RE2_OUT_SEL2 0x07, 0xe2
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RE3_OUT_SEL1 0x07, 0xe3
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RE4_OUT_SEL0 0x07, 0xe4
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RE5_REMOTE_WAKEUP 0x07, 0xe5
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RE7_PUB_GPIO 0x07, 0xe7
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RE8_TYPESEL_MOS_I2S 0x07, 0xe8
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RE9_TYPESEL_MOS_TS 0x07, 0xe9
-/* ONLY for TM6010 */
-#define TM6010_REQ07_REA_TYPESEL_MOS_CCIR 0x07, 0xea
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RF0_BIST_CRC_RESULT0 0x07, 0xf0
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RF1_BIST_CRC_RESULT1 0x07, 0xf1
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RF2_BIST_CRC_RESULT2 0x07, 0xf2
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RF3_BIST_CRC_RESULT3 0x07, 0xf3
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RF4_BIST_ERR_VST2 0x07, 0xf4
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RF5_BIST_ERR_VST1 0x07, 0xf5
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RF6_BIST_ERR_VST0 0x07, 0xf6
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RF7_BIST 0x07, 0xf7
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RFE_POWER_DOWN 0x07, 0xfe
-#define TM6010_REQ07_RFF_SOFT_RESET 0x07, 0xff
-
-/* Define TM6000/TM6010 USB registers */
-#define TM6010_REQ05_R00_MAIN_CTRL 0x05, 0x00
-#define TM6010_REQ05_R01_DEVADDR 0x05, 0x01
-#define TM6010_REQ05_R02_TEST 0x05, 0x02
-#define TM6010_REQ05_R04_SOFN0 0x05, 0x04
-#define TM6010_REQ05_R05_SOFN1 0x05, 0x05
-#define TM6010_REQ05_R06_SOFTM0 0x05, 0x06
-#define TM6010_REQ05_R07_SOFTM1 0x05, 0x07
-#define TM6010_REQ05_R08_PHY_TEST 0x05, 0x08
-#define TM6010_REQ05_R09_VCTL 0x05, 0x09
-#define TM6010_REQ05_R0A_VSTA 0x05, 0x0a
-#define TM6010_REQ05_R0B_CX_CFG 0x05, 0x0b
-#define TM6010_REQ05_R0C_ENDP0_REG0 0x05, 0x0c
-#define TM6010_REQ05_R10_GMASK 0x05, 0x10
-#define TM6010_REQ05_R11_IMASK0 0x05, 0x11
-#define TM6010_REQ05_R12_IMASK1 0x05, 0x12
-#define TM6010_REQ05_R13_IMASK2 0x05, 0x13
-#define TM6010_REQ05_R14_IMASK3 0x05, 0x14
-#define TM6010_REQ05_R15_IMASK4 0x05, 0x15
-#define TM6010_REQ05_R16_IMASK5 0x05, 0x16
-#define TM6010_REQ05_R17_IMASK6 0x05, 0x17
-#define TM6010_REQ05_R18_IMASK7 0x05, 0x18
-#define TM6010_REQ05_R19_ZEROP0 0x05, 0x19
-#define TM6010_REQ05_R1A_ZEROP1 0x05, 0x1a
-#define TM6010_REQ05_R1C_FIFO_EMP0 0x05, 0x1c
-#define TM6010_REQ05_R1D_FIFO_EMP1 0x05, 0x1d
-#define TM6010_REQ05_R20_IRQ_GROUP 0x05, 0x20
-#define TM6010_REQ05_R21_IRQ_SOURCE0 0x05, 0x21
-#define TM6010_REQ05_R22_IRQ_SOURCE1 0x05, 0x22
-#define TM6010_REQ05_R23_IRQ_SOURCE2 0x05, 0x23
-#define TM6010_REQ05_R24_IRQ_SOURCE3 0x05, 0x24
-#define TM6010_REQ05_R25_IRQ_SOURCE4 0x05, 0x25
-#define TM6010_REQ05_R26_IRQ_SOURCE5 0x05, 0x26
-#define TM6010_REQ05_R27_IRQ_SOURCE6 0x05, 0x27
-#define TM6010_REQ05_R28_IRQ_SOURCE7 0x05, 0x28
-#define TM6010_REQ05_R29_SEQ_ERR0 0x05, 0x29
-#define TM6010_REQ05_R2A_SEQ_ERR1 0x05, 0x2a
-#define TM6010_REQ05_R2B_SEQ_ABORT0 0x05, 0x2b
-#define TM6010_REQ05_R2C_SEQ_ABORT1 0x05, 0x2c
-#define TM6010_REQ05_R2D_TX_ZERO0 0x05, 0x2d
-#define TM6010_REQ05_R2E_TX_ZERO1 0x05, 0x2e
-#define TM6010_REQ05_R2F_IDLE_CNT 0x05, 0x2f
-#define TM6010_REQ05_R30_FNO_P1 0x05, 0x30
-#define TM6010_REQ05_R31_FNO_P2 0x05, 0x31
-#define TM6010_REQ05_R32_FNO_P3 0x05, 0x32
-#define TM6010_REQ05_R33_FNO_P4 0x05, 0x33
-#define TM6010_REQ05_R34_FNO_P5 0x05, 0x34
-#define TM6010_REQ05_R35_FNO_P6 0x05, 0x35
-#define TM6010_REQ05_R36_FNO_P7 0x05, 0x36
-#define TM6010_REQ05_R37_FNO_P8 0x05, 0x37
-#define TM6010_REQ05_R38_FNO_P9 0x05, 0x38
-#define TM6010_REQ05_R30_FNO_P10 0x05, 0x39
-#define TM6010_REQ05_R30_FNO_P11 0x05, 0x3a
-#define TM6010_REQ05_R30_FNO_P12 0x05, 0x3b
-#define TM6010_REQ05_R30_FNO_P13 0x05, 0x3c
-#define TM6010_REQ05_R30_FNO_P14 0x05, 0x3d
-#define TM6010_REQ05_R30_FNO_P15 0x05, 0x3e
-#define TM6010_REQ05_R40_IN_MAXPS_LOW1 0x05, 0x40
-#define TM6010_REQ05_R41_IN_MAXPS_HIGH1 0x05, 0x41
-#define TM6010_REQ05_R42_IN_MAXPS_LOW2 0x05, 0x42
-#define TM6010_REQ05_R43_IN_MAXPS_HIGH2 0x05, 0x43
-#define TM6010_REQ05_R44_IN_MAXPS_LOW3 0x05, 0x44
-#define TM6010_REQ05_R45_IN_MAXPS_HIGH3 0x05, 0x45
-#define TM6010_REQ05_R46_IN_MAXPS_LOW4 0x05, 0x46
-#define TM6010_REQ05_R47_IN_MAXPS_HIGH4 0x05, 0x47
-#define TM6010_REQ05_R48_IN_MAXPS_LOW5 0x05, 0x48
-#define TM6010_REQ05_R49_IN_MAXPS_HIGH5 0x05, 0x49
-#define TM6010_REQ05_R4A_IN_MAXPS_LOW6 0x05, 0x4a
-#define TM6010_REQ05_R4B_IN_MAXPS_HIGH6 0x05, 0x4b
-#define TM6010_REQ05_R4C_IN_MAXPS_LOW7 0x05, 0x4c
-#define TM6010_REQ05_R4D_IN_MAXPS_HIGH7 0x05, 0x4d
-#define TM6010_REQ05_R4E_IN_MAXPS_LOW8 0x05, 0x4e
-#define TM6010_REQ05_R4F_IN_MAXPS_HIGH8 0x05, 0x4f
-#define TM6010_REQ05_R50_IN_MAXPS_LOW9 0x05, 0x50
-#define TM6010_REQ05_R51_IN_MAXPS_HIGH9 0x05, 0x51
-#define TM6010_REQ05_R40_IN_MAXPS_LOW10 0x05, 0x52
-#define TM6010_REQ05_R41_IN_MAXPS_HIGH10 0x05, 0x53
-#define TM6010_REQ05_R40_IN_MAXPS_LOW11 0x05, 0x54
-#define TM6010_REQ05_R41_IN_MAXPS_HIGH11 0x05, 0x55
-#define TM6010_REQ05_R40_IN_MAXPS_LOW12 0x05, 0x56
-#define TM6010_REQ05_R41_IN_MAXPS_HIGH12 0x05, 0x57
-#define TM6010_REQ05_R40_IN_MAXPS_LOW13 0x05, 0x58
-#define TM6010_REQ05_R41_IN_MAXPS_HIGH13 0x05, 0x59
-#define TM6010_REQ05_R40_IN_MAXPS_LOW14 0x05, 0x5a
-#define TM6010_REQ05_R41_IN_MAXPS_HIGH14 0x05, 0x5b
-#define TM6010_REQ05_R40_IN_MAXPS_LOW15 0x05, 0x5c
-#define TM6010_REQ05_R41_IN_MAXPS_HIGH15 0x05, 0x5d
-#define TM6010_REQ05_R60_OUT_MAXPS_LOW1 0x05, 0x60
-#define TM6010_REQ05_R61_OUT_MAXPS_HIGH1 0x05, 0x61
-#define TM6010_REQ05_R62_OUT_MAXPS_LOW2 0x05, 0x62
-#define TM6010_REQ05_R63_OUT_MAXPS_HIGH2 0x05, 0x63
-#define TM6010_REQ05_R64_OUT_MAXPS_LOW3 0x05, 0x64
-#define TM6010_REQ05_R65_OUT_MAXPS_HIGH3 0x05, 0x65
-#define TM6010_REQ05_R66_OUT_MAXPS_LOW4 0x05, 0x66
-#define TM6010_REQ05_R67_OUT_MAXPS_HIGH4 0x05, 0x67
-#define TM6010_REQ05_R68_OUT_MAXPS_LOW5 0x05, 0x68
-#define TM6010_REQ05_R69_OUT_MAXPS_HIGH5 0x05, 0x69
-#define TM6010_REQ05_R6A_OUT_MAXPS_LOW6 0x05, 0x6a
-#define TM6010_REQ05_R6B_OUT_MAXPS_HIGH6 0x05, 0x6b
-#define TM6010_REQ05_R6C_OUT_MAXPS_LOW7 0x05, 0x6c
-#define TM6010_REQ05_R6D_OUT_MAXPS_HIGH7 0x05, 0x6d
-#define TM6010_REQ05_R6E_OUT_MAXPS_LOW8 0x05, 0x6e
-#define TM6010_REQ05_R6F_OUT_MAXPS_HIGH8 0x05, 0x6f
-#define TM6010_REQ05_R70_OUT_MAXPS_LOW9 0x05, 0x70
-#define TM6010_REQ05_R71_OUT_MAXPS_HIGH9 0x05, 0x71
-#define TM6010_REQ05_R60_OUT_MAXPS_LOW10 0x05, 0x72
-#define TM6010_REQ05_R61_OUT_MAXPS_HIGH10 0x05, 0x73
-#define TM6010_REQ05_R60_OUT_MAXPS_LOW11 0x05, 0x74
-#define TM6010_REQ05_R61_OUT_MAXPS_HIGH11 0x05, 0x75
-#define TM6010_REQ05_R60_OUT_MAXPS_LOW12 0x05, 0x76
-#define TM6010_REQ05_R61_OUT_MAXPS_HIGH12 0x05, 0x77
-#define TM6010_REQ05_R60_OUT_MAXPS_LOW13 0x05, 0x78
-#define TM6010_REQ05_R61_OUT_MAXPS_HIGH13 0x05, 0x79
-#define TM6010_REQ05_R60_OUT_MAXPS_LOW14 0x05, 0x7a
-#define TM6010_REQ05_R61_OUT_MAXPS_HIGH14 0x05, 0x7b
-#define TM6010_REQ05_R60_OUT_MAXPS_LOW15 0x05, 0x7c
-#define TM6010_REQ05_R61_OUT_MAXPS_HIGH15 0x05, 0x7d
-#define TM6010_REQ05_R80_FIFO0 0x05, 0x80
-#define TM6010_REQ05_R81_FIFO1 0x05, 0x81
-#define TM6010_REQ05_R82_FIFO2 0x05, 0x82
-#define TM6010_REQ05_R83_FIFO3 0x05, 0x83
-#define TM6010_REQ05_R84_FIFO4 0x05, 0x84
-#define TM6010_REQ05_R85_FIFO5 0x05, 0x85
-#define TM6010_REQ05_R86_FIFO6 0x05, 0x86
-#define TM6010_REQ05_R87_FIFO7 0x05, 0x87
-#define TM6010_REQ05_R88_FIFO8 0x05, 0x88
-#define TM6010_REQ05_R89_FIFO9 0x05, 0x89
-#define TM6010_REQ05_R81_FIFO10 0x05, 0x8a
-#define TM6010_REQ05_R81_FIFO11 0x05, 0x8b
-#define TM6010_REQ05_R81_FIFO12 0x05, 0x8c
-#define TM6010_REQ05_R81_FIFO13 0x05, 0x8d
-#define TM6010_REQ05_R81_FIFO14 0x05, 0x8e
-#define TM6010_REQ05_R81_FIFO15 0x05, 0x8f
-#define TM6010_REQ05_R90_CFG_FIFO0 0x05, 0x90
-#define TM6010_REQ05_R91_CFG_FIFO1 0x05, 0x91
-#define TM6010_REQ05_R92_CFG_FIFO2 0x05, 0x92
-#define TM6010_REQ05_R93_CFG_FIFO3 0x05, 0x93
-#define TM6010_REQ05_R94_CFG_FIFO4 0x05, 0x94
-#define TM6010_REQ05_R95_CFG_FIFO5 0x05, 0x95
-#define TM6010_REQ05_R96_CFG_FIFO6 0x05, 0x96
-#define TM6010_REQ05_R97_CFG_FIFO7 0x05, 0x97
-#define TM6010_REQ05_R98_CFG_FIFO8 0x05, 0x98
-#define TM6010_REQ05_R99_CFG_FIFO9 0x05, 0x99
-#define TM6010_REQ05_R91_CFG_FIFO10 0x05, 0x9a
-#define TM6010_REQ05_R91_CFG_FIFO11 0x05, 0x9b
-#define TM6010_REQ05_R91_CFG_FIFO12 0x05, 0x9c
-#define TM6010_REQ05_R91_CFG_FIFO13 0x05, 0x9d
-#define TM6010_REQ05_R91_CFG_FIFO14 0x05, 0x9e
-#define TM6010_REQ05_R91_CFG_FIFO15 0x05, 0x9f
-#define TM6010_REQ05_RA0_CTL_FIFO0 0x05, 0xa0
-#define TM6010_REQ05_RA1_CTL_FIFO1 0x05, 0xa1
-#define TM6010_REQ05_RA2_CTL_FIFO2 0x05, 0xa2
-#define TM6010_REQ05_RA3_CTL_FIFO3 0x05, 0xa3
-#define TM6010_REQ05_RA4_CTL_FIFO4 0x05, 0xa4
-#define TM6010_REQ05_RA5_CTL_FIFO5 0x05, 0xa5
-#define TM6010_REQ05_RA6_CTL_FIFO6 0x05, 0xa6
-#define TM6010_REQ05_RA7_CTL_FIFO7 0x05, 0xa7
-#define TM6010_REQ05_RA8_CTL_FIFO8 0x05, 0xa8
-#define TM6010_REQ05_RA9_CTL_FIFO9 0x05, 0xa9
-#define TM6010_REQ05_RA1_CTL_FIFO10 0x05, 0xaa
-#define TM6010_REQ05_RA1_CTL_FIFO11 0x05, 0xab
-#define TM6010_REQ05_RA1_CTL_FIFO12 0x05, 0xac
-#define TM6010_REQ05_RA1_CTL_FIFO13 0x05, 0xad
-#define TM6010_REQ05_RA1_CTL_FIFO14 0x05, 0xae
-#define TM6010_REQ05_RA1_CTL_FIFO15 0x05, 0xaf
-#define TM6010_REQ05_RB0_BC_LOW_FIFO0 0x05, 0xb0
-#define TM6010_REQ05_RB1_BC_LOW_FIFO1 0x05, 0xb1
-#define TM6010_REQ05_RB2_BC_LOW_FIFO2 0x05, 0xb2
-#define TM6010_REQ05_RB3_BC_LOW_FIFO3 0x05, 0xb3
-#define TM6010_REQ05_RB4_BC_LOW_FIFO4 0x05, 0xb4
-#define TM6010_REQ05_RB5_BC_LOW_FIFO5 0x05, 0xb5
-#define TM6010_REQ05_RB6_BC_LOW_FIFO6 0x05, 0xb6
-#define TM6010_REQ05_RB7_BC_LOW_FIFO7 0x05, 0xb7
-#define TM6010_REQ05_RB8_BC_LOW_FIFO8 0x05, 0xb8
-#define TM6010_REQ05_RB9_BC_LOW_FIFO9 0x05, 0xb9
-#define TM6010_REQ05_RB1_BC_LOW_FIFO10 0x05, 0xba
-#define TM6010_REQ05_RB1_BC_LOW_FIFO11 0x05, 0xbb
-#define TM6010_REQ05_RB1_BC_LOW_FIFO12 0x05, 0xbc
-#define TM6010_REQ05_RB1_BC_LOW_FIFO13 0x05, 0xbd
-#define TM6010_REQ05_RB1_BC_LOW_FIFO14 0x05, 0xbe
-#define TM6010_REQ05_RB1_BC_LOW_FIFO15 0x05, 0xbf
-#define TM6010_REQ05_RC0_DATA_FIFO0 0x05, 0xc0
-#define TM6010_REQ05_RC4_DATA_FIFO1 0x05, 0xc4
-#define TM6010_REQ05_RC8_DATA_FIFO2 0x05, 0xc8
-#define TM6010_REQ05_RCC_DATA_FIFO3 0x05, 0xcc
-#define TM6010_REQ05_RD0_DATA_FIFO4 0x05, 0xd0
-#define TM6010_REQ05_RD4_DATA_FIFO5 0x05, 0xd4
-#define TM6010_REQ05_RD8_DATA_FIFO6 0x05, 0xd8
-#define TM6010_REQ05_RDC_DATA_FIFO7 0x05, 0xdc
-#define TM6010_REQ05_RE0_DATA_FIFO8 0x05, 0xe0
-#define TM6010_REQ05_RE4_DATA_FIFO9 0x05, 0xe4
-#define TM6010_REQ05_RC4_DATA_FIFO10 0x05, 0xe8
-#define TM6010_REQ05_RC4_DATA_FIFO11 0x05, 0xec
-#define TM6010_REQ05_RC4_DATA_FIFO12 0x05, 0xf0
-#define TM6010_REQ05_RC4_DATA_FIFO13 0x05, 0xf4
-#define TM6010_REQ05_RC4_DATA_FIFO14 0x05, 0xf8
-#define TM6010_REQ05_RC4_DATA_FIFO15 0x05, 0xfc
-
-/* Define TM6010 Audio decoder registers */
-/* This core available only in TM6010 */
-#define TM6010_REQ08_R00_A_VERSION 0x08, 0x00
-#define TM6010_REQ08_R01_A_INIT 0x08, 0x01
-#define TM6010_REQ08_R02_A_FIX_GAIN_CTRL 0x08, 0x02
-#define TM6010_REQ08_R03_A_AUTO_GAIN_CTRL 0x08, 0x03
-#define TM6010_REQ08_R04_A_SIF_AMP_CTRL 0x08, 0x04
-#define TM6010_REQ08_R05_A_STANDARD_MOD 0x08, 0x05
-#define TM6010_REQ08_R06_A_SOUND_MOD 0x08, 0x06
-#define TM6010_REQ08_R07_A_LEFT_VOL 0x08, 0x07
-#define TM6010_REQ08_R08_A_RIGHT_VOL 0x08, 0x08
-#define TM6010_REQ08_R09_A_MAIN_VOL 0x08, 0x09
-#define TM6010_REQ08_R0A_A_I2S_MOD 0x08, 0x0a
-#define TM6010_REQ08_R0B_A_ASD_THRES1 0x08, 0x0b
-#define TM6010_REQ08_R0C_A_ASD_THRES2 0x08, 0x0c
-#define TM6010_REQ08_R0D_A_AMD_THRES 0x08, 0x0d
-#define TM6010_REQ08_R0E_A_MONO_THRES1 0x08, 0x0e
-#define TM6010_REQ08_R0F_A_MONO_THRES2 0x08, 0x0f
-#define TM6010_REQ08_R10_A_MUTE_THRES1 0x08, 0x10
-#define TM6010_REQ08_R11_A_MUTE_THRES2 0x08, 0x11
-#define TM6010_REQ08_R12_A_AGC_U 0x08, 0x12
-#define TM6010_REQ08_R13_A_AGC_ERR_T 0x08, 0x13
-#define TM6010_REQ08_R14_A_AGC_GAIN_INIT 0x08, 0x14
-#define TM6010_REQ08_R15_A_AGC_STEP_THR 0x08, 0x15
-#define TM6010_REQ08_R16_A_AGC_GAIN_MAX 0x08, 0x16
-#define TM6010_REQ08_R17_A_AGC_GAIN_MIN 0x08, 0x17
-#define TM6010_REQ08_R18_A_TR_CTRL 0x08, 0x18
-#define TM6010_REQ08_R19_A_FH_2FH_GAIN 0x08, 0x19
-#define TM6010_REQ08_R1A_A_NICAM_SER_MAX 0x08, 0x1a
-#define TM6010_REQ08_R1B_A_NICAM_SER_MIN 0x08, 0x1b
-#define TM6010_REQ08_R1E_A_GAIN_DEEMPH_OUT 0x08, 0x1e
-#define TM6010_REQ08_R1F_A_TEST_INTF_SEL 0x08, 0x1f
-#define TM6010_REQ08_R20_A_TEST_PIN_SEL 0x08, 0x20
-#define TM6010_REQ08_R21_A_AGC_ERR 0x08, 0x21
-#define TM6010_REQ08_R22_A_AGC_GAIN 0x08, 0x22
-#define TM6010_REQ08_R23_A_NICAM_INFO 0x08, 0x23
-#define TM6010_REQ08_R24_A_SER 0x08, 0x24
-#define TM6010_REQ08_R25_A_C1_AMP 0x08, 0x25
-#define TM6010_REQ08_R26_A_C2_AMP 0x08, 0x26
-#define TM6010_REQ08_R27_A_NOISE_AMP 0x08, 0x27
-#define TM6010_REQ08_R28_A_AUDIO_MODE_RES 0x08, 0x28
-
-/* Define TM6010 Video ADC registers */
-#define TM6010_REQ08_RE0_ADC_REF 0x08, 0xe0
-#define TM6010_REQ08_RE1_DAC_CLMP 0x08, 0xe1
-#define TM6010_REQ08_RE2_POWER_DOWN_CTRL1 0x08, 0xe2
-#define TM6010_REQ08_RE3_ADC_IN1_SEL 0x08, 0xe3
-#define TM6010_REQ08_RE4_ADC_IN2_SEL 0x08, 0xe4
-#define TM6010_REQ08_RE5_GAIN_PARAM 0x08, 0xe5
-#define TM6010_REQ08_RE6_POWER_DOWN_CTRL2 0x08, 0xe6
-#define TM6010_REQ08_RE7_REG_GAIN_Y 0x08, 0xe7
-#define TM6010_REQ08_RE8_REG_GAIN_C 0x08, 0xe8
-#define TM6010_REQ08_RE9_BIAS_CTRL 0x08, 0xe9
-#define TM6010_REQ08_REA_BUFF_DRV_CTRL 0x08, 0xea
-#define TM6010_REQ08_REB_SIF_GAIN_CTRL 0x08, 0xeb
-#define TM6010_REQ08_REC_REVERSE_YC_CTRL 0x08, 0xec
-#define TM6010_REQ08_RED_GAIN_SEL 0x08, 0xed
-
-/* Define TM6010 Audio ADC registers */
-#define TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG 0x08, 0xf0
-#define TM6010_REQ08_RF1_AADC_POWER_DOWN 0x08, 0xf1
-#define TM6010_REQ08_RF2_LEFT_CHANNEL_VOL 0x08, 0xf2
-#define TM6010_REQ08_RF3_RIGHT_CHANNEL_VOL 0x08, 0xf3
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-// tm6000-stds.c - driver for TM5600/TM6000/TM6010 USB video capture devices
-//
-// Copyright (c) 2007 Mauro Carvalho Chehab <mchehab@kernel.org>
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include "tm6000.h"
-#include "tm6000-regs.h"
-
-static unsigned int tm6010_a_mode;
-module_param(tm6010_a_mode, int, 0644);
-MODULE_PARM_DESC(tm6010_a_mode, "set tm6010 sif audio mode");
-
-struct tm6000_reg_settings {
- unsigned char req;
- unsigned char reg;
- unsigned char value;
-};
-
-
-struct tm6000_std_settings {
- v4l2_std_id id;
- struct tm6000_reg_settings *common;
-};
-
-static struct tm6000_reg_settings composite_pal_m[] = {
- { TM6010_REQ07_R3F_RESET, 0x01 },
- { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x04 },
- { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e },
- { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
- { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x00 },
- { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 },
- { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e },
- { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x83 },
- { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x0a },
- { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe0 },
- { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
- { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
- { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
- { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
- { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 },
- { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x20 },
- { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61 },
- { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c },
- { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c },
- { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52 },
- { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f },
- { TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc },
- { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 },
- { TM6010_REQ07_R3F_RESET, 0x00 },
- { 0, 0, 0 }
-};
-
-static struct tm6000_reg_settings composite_pal_nc[] = {
- { TM6010_REQ07_R3F_RESET, 0x01 },
- { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x36 },
- { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e },
- { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
- { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x02 },
- { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 },
- { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e },
- { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x91 },
- { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x1f },
- { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0x0c },
- { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
- { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
- { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
- { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
- { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x8c },
- { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x2c },
- { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1 },
- { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c },
- { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c },
- { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52 },
- { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f },
- { TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc },
- { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 },
- { TM6010_REQ07_R3F_RESET, 0x00 },
- { 0, 0, 0 }
-};
-
-static struct tm6000_reg_settings composite_pal[] = {
- { TM6010_REQ07_R3F_RESET, 0x01 },
- { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x32 },
- { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e },
- { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
- { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x02 },
- { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 },
- { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x25 },
- { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0xd5 },
- { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x63 },
- { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0x50 },
- { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
- { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
- { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
- { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
- { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x8c },
- { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x2c },
- { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1 },
- { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c },
- { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c },
- { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52 },
- { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f },
- { TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc },
- { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 },
- { TM6010_REQ07_R3F_RESET, 0x00 },
- { 0, 0, 0 }
-};
-
-static struct tm6000_reg_settings composite_secam[] = {
- { TM6010_REQ07_R3F_RESET, 0x01 },
- { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x38 },
- { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e },
- { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
- { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x02 },
- { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 },
- { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x24 },
- { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x92 },
- { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xe8 },
- { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xed },
- { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
- { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
- { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
- { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
- { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x8c },
- { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x2c },
- { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1 },
- { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x2c },
- { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x18 },
- { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42 },
- { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0xff },
- { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 },
- { TM6010_REQ07_R3F_RESET, 0x00 },
- { 0, 0, 0 }
-};
-
-static struct tm6000_reg_settings composite_ntsc[] = {
- { TM6010_REQ07_R3F_RESET, 0x01 },
- { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x00 },
- { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0f },
- { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
- { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x00 },
- { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 },
- { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e },
- { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x8b },
- { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xa2 },
- { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe9 },
- { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
- { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
- { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
- { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
- { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 },
- { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22 },
- { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61 },
- { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x1c },
- { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c },
- { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42 },
- { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f },
- { TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdd },
- { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 },
- { TM6010_REQ07_R3F_RESET, 0x00 },
- { 0, 0, 0 }
-};
-
-static struct tm6000_std_settings composite_stds[] = {
- { .id = V4L2_STD_PAL_M, .common = composite_pal_m, },
- { .id = V4L2_STD_PAL_Nc, .common = composite_pal_nc, },
- { .id = V4L2_STD_PAL, .common = composite_pal, },
- { .id = V4L2_STD_SECAM, .common = composite_secam, },
- { .id = V4L2_STD_NTSC, .common = composite_ntsc, },
-};
-
-static struct tm6000_reg_settings svideo_pal_m[] = {
- { TM6010_REQ07_R3F_RESET, 0x01 },
- { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x05 },
- { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e },
- { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
- { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x04 },
- { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 },
- { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e },
- { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x83 },
- { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x0a },
- { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe0 },
- { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
- { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
- { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
- { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
- { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 },
- { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22 },
- { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61 },
- { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c },
- { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c },
- { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52 },
- { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f },
- { TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc },
- { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 },
- { TM6010_REQ07_R3F_RESET, 0x00 },
- { 0, 0, 0 }
-};
-
-static struct tm6000_reg_settings svideo_pal_nc[] = {
- { TM6010_REQ07_R3F_RESET, 0x01 },
- { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x37 },
- { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e },
- { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
- { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x04 },
- { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 },
- { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e },
- { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x91 },
- { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x1f },
- { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0x0c },
- { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
- { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
- { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
- { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
- { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 },
- { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22 },
- { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1 },
- { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c },
- { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c },
- { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52 },
- { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f },
- { TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc },
- { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 },
- { TM6010_REQ07_R3F_RESET, 0x00 },
- { 0, 0, 0 }
-};
-
-static struct tm6000_reg_settings svideo_pal[] = {
- { TM6010_REQ07_R3F_RESET, 0x01 },
- { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x33 },
- { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e },
- { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
- { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x04 },
- { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x30 },
- { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x25 },
- { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0xd5 },
- { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x63 },
- { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0x50 },
- { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
- { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
- { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
- { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
- { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x8c },
- { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x2a },
- { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1 },
- { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c },
- { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c },
- { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52 },
- { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f },
- { TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc },
- { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 },
- { TM6010_REQ07_R3F_RESET, 0x00 },
- { 0, 0, 0 }
-};
-
-static struct tm6000_reg_settings svideo_secam[] = {
- { TM6010_REQ07_R3F_RESET, 0x01 },
- { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x39 },
- { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e },
- { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
- { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x03 },
- { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 },
- { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x24 },
- { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x92 },
- { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xe8 },
- { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xed },
- { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
- { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
- { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
- { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
- { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x8c },
- { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x2a },
- { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1 },
- { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x2c },
- { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x18 },
- { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42 },
- { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0xff },
- { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 },
- { TM6010_REQ07_R3F_RESET, 0x00 },
- { 0, 0, 0 }
-};
-
-static struct tm6000_reg_settings svideo_ntsc[] = {
- { TM6010_REQ07_R3F_RESET, 0x01 },
- { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x01 },
- { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0f },
- { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
- { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x03 },
- { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x30 },
- { TM6010_REQ07_R17_HLOOP_MAXSTATE, 0x8b },
- { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e },
- { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x8b },
- { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xa2 },
- { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe9 },
- { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
- { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
- { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
- { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
- { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 },
- { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22 },
- { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61 },
- { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x1c },
- { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c },
- { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42 },
- { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f },
- { TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdd },
- { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 },
- { TM6010_REQ07_R3F_RESET, 0x00 },
- { 0, 0, 0 }
-};
-
-static struct tm6000_std_settings svideo_stds[] = {
- { .id = V4L2_STD_PAL_M, .common = svideo_pal_m, },
- { .id = V4L2_STD_PAL_Nc, .common = svideo_pal_nc, },
- { .id = V4L2_STD_PAL, .common = svideo_pal, },
- { .id = V4L2_STD_SECAM, .common = svideo_secam, },
- { .id = V4L2_STD_NTSC, .common = svideo_ntsc, },
-};
-
-static int tm6000_set_audio_std(struct tm6000_core *dev)
-{
- uint8_t areg_02 = 0x04; /* GC1 Fixed gain 0dB */
- uint8_t areg_05 = 0x01; /* Auto 4.5 = M Japan, Auto 6.5 = DK */
- uint8_t areg_06 = 0x02; /* Auto de-emphasis, manual channel mode */
-
- if (dev->radio) {
- tm6000_set_reg(dev, TM6010_REQ08_R01_A_INIT, 0x00);
- tm6000_set_reg(dev, TM6010_REQ08_R02_A_FIX_GAIN_CTRL, 0x04);
- tm6000_set_reg(dev, TM6010_REQ08_R03_A_AUTO_GAIN_CTRL, 0x00);
- tm6000_set_reg(dev, TM6010_REQ08_R04_A_SIF_AMP_CTRL, 0x80);
- tm6000_set_reg(dev, TM6010_REQ08_R05_A_STANDARD_MOD, 0x0c);
- /* set mono or stereo */
- if (dev->amode == V4L2_TUNER_MODE_MONO)
- tm6000_set_reg(dev, TM6010_REQ08_R06_A_SOUND_MOD, 0x00);
- else if (dev->amode == V4L2_TUNER_MODE_STEREO)
- tm6000_set_reg(dev, TM6010_REQ08_R06_A_SOUND_MOD, 0x02);
- tm6000_set_reg(dev, TM6010_REQ08_R09_A_MAIN_VOL, 0x18);
- tm6000_set_reg(dev, TM6010_REQ08_R0C_A_ASD_THRES2, 0x0a);
- tm6000_set_reg(dev, TM6010_REQ08_R0D_A_AMD_THRES, 0x40);
- tm6000_set_reg(dev, TM6010_REQ08_RF1_AADC_POWER_DOWN, 0xfe);
- tm6000_set_reg(dev, TM6010_REQ08_R1E_A_GAIN_DEEMPH_OUT, 0x13);
- tm6000_set_reg(dev, TM6010_REQ08_R01_A_INIT, 0x80);
- tm6000_set_reg(dev, TM6010_REQ07_RFE_POWER_DOWN, 0xff);
- return 0;
- }
-
- /*
- * STD/MN shouldn't be affected by tm6010_a_mode, as there's just one
- * audio standard for each V4L2_STD type.
- */
- if ((dev->norm & V4L2_STD_NTSC) == V4L2_STD_NTSC_M_KR) {
- areg_05 |= 0x04;
- } else if ((dev->norm & V4L2_STD_NTSC) == V4L2_STD_NTSC_M_JP) {
- areg_05 |= 0x43;
- } else if (dev->norm & V4L2_STD_MN) {
- areg_05 |= 0x22;
- } else switch (tm6010_a_mode) {
- /* auto */
- case 0:
- if ((dev->norm & V4L2_STD_SECAM) == V4L2_STD_SECAM_L)
- areg_05 |= 0x00;
- else /* Other PAL/SECAM standards */
- areg_05 |= 0x10;
- break;
- /* A2 */
- case 1:
- if (dev->norm & V4L2_STD_DK)
- areg_05 = 0x09;
- else
- areg_05 = 0x05;
- break;
- /* NICAM */
- case 2:
- if (dev->norm & V4L2_STD_DK) {
- areg_05 = 0x06;
- } else if (dev->norm & V4L2_STD_PAL_I) {
- areg_05 = 0x08;
- } else if (dev->norm & V4L2_STD_SECAM_L) {
- areg_05 = 0x0a;
- areg_02 = 0x02;
- } else {
- areg_05 = 0x07;
- }
- break;
- /* other */
- case 3:
- if (dev->norm & V4L2_STD_DK) {
- areg_05 = 0x0b;
- } else {
- areg_05 = 0x02;
- }
- break;
- }
-
- tm6000_set_reg(dev, TM6010_REQ08_R01_A_INIT, 0x00);
- tm6000_set_reg(dev, TM6010_REQ08_R02_A_FIX_GAIN_CTRL, areg_02);
- tm6000_set_reg(dev, TM6010_REQ08_R03_A_AUTO_GAIN_CTRL, 0x00);
- tm6000_set_reg(dev, TM6010_REQ08_R04_A_SIF_AMP_CTRL, 0xa0);
- tm6000_set_reg(dev, TM6010_REQ08_R05_A_STANDARD_MOD, areg_05);
- tm6000_set_reg(dev, TM6010_REQ08_R06_A_SOUND_MOD, areg_06);
- tm6000_set_reg(dev, TM6010_REQ08_R07_A_LEFT_VOL, 0x00);
- tm6000_set_reg(dev, TM6010_REQ08_R08_A_RIGHT_VOL, 0x00);
- tm6000_set_reg(dev, TM6010_REQ08_R09_A_MAIN_VOL, 0x08);
- tm6000_set_reg(dev, TM6010_REQ08_R0A_A_I2S_MOD, 0x91);
- tm6000_set_reg(dev, TM6010_REQ08_R0B_A_ASD_THRES1, 0x20);
- tm6000_set_reg(dev, TM6010_REQ08_R0C_A_ASD_THRES2, 0x12);
- tm6000_set_reg(dev, TM6010_REQ08_R0D_A_AMD_THRES, 0x20);
- tm6000_set_reg(dev, TM6010_REQ08_R0E_A_MONO_THRES1, 0xf0);
- tm6000_set_reg(dev, TM6010_REQ08_R0F_A_MONO_THRES2, 0x80);
- tm6000_set_reg(dev, TM6010_REQ08_R10_A_MUTE_THRES1, 0xc0);
- tm6000_set_reg(dev, TM6010_REQ08_R11_A_MUTE_THRES2, 0x80);
- tm6000_set_reg(dev, TM6010_REQ08_R12_A_AGC_U, 0x12);
- tm6000_set_reg(dev, TM6010_REQ08_R13_A_AGC_ERR_T, 0xfe);
- tm6000_set_reg(dev, TM6010_REQ08_R14_A_AGC_GAIN_INIT, 0x20);
- tm6000_set_reg(dev, TM6010_REQ08_R15_A_AGC_STEP_THR, 0x14);
- tm6000_set_reg(dev, TM6010_REQ08_R16_A_AGC_GAIN_MAX, 0xfe);
- tm6000_set_reg(dev, TM6010_REQ08_R17_A_AGC_GAIN_MIN, 0x01);
- tm6000_set_reg(dev, TM6010_REQ08_R18_A_TR_CTRL, 0xa0);
- tm6000_set_reg(dev, TM6010_REQ08_R19_A_FH_2FH_GAIN, 0x32);
- tm6000_set_reg(dev, TM6010_REQ08_R1A_A_NICAM_SER_MAX, 0x64);
- tm6000_set_reg(dev, TM6010_REQ08_R1B_A_NICAM_SER_MIN, 0x20);
- tm6000_set_reg(dev, REQ_08_SET_GET_AVREG_BIT, 0x1c, 0x00);
- tm6000_set_reg(dev, REQ_08_SET_GET_AVREG_BIT, 0x1d, 0x00);
- tm6000_set_reg(dev, TM6010_REQ08_R1E_A_GAIN_DEEMPH_OUT, 0x13);
- tm6000_set_reg(dev, TM6010_REQ08_R1F_A_TEST_INTF_SEL, 0x00);
- tm6000_set_reg(dev, TM6010_REQ08_R20_A_TEST_PIN_SEL, 0x00);
- tm6000_set_reg(dev, TM6010_REQ08_R01_A_INIT, 0x80);
-
- return 0;
-}
-
-void tm6000_get_std_res(struct tm6000_core *dev)
-{
- /* Currently, those are the only supported resoltions */
- if (dev->norm & V4L2_STD_525_60)
- dev->height = 480;
- else
- dev->height = 576;
-
- dev->width = 720;
-}
-
-static int tm6000_load_std(struct tm6000_core *dev, struct tm6000_reg_settings *set)
-{
- int i, rc;
-
- /* Load board's initialization table */
- for (i = 0; set[i].req; i++) {
- rc = tm6000_set_reg(dev, set[i].req, set[i].reg, set[i].value);
- if (rc < 0) {
- printk(KERN_ERR "Error %i while setting req %d, reg %d to value %d\n",
- rc, set[i].req, set[i].reg, set[i].value);
- return rc;
- }
- }
-
- return 0;
-}
-
-int tm6000_set_standard(struct tm6000_core *dev)
-{
- struct tm6000_input *input;
- int i, rc = 0;
- u8 reg_07_fe = 0x8a;
- u8 reg_08_f1 = 0xfc;
- u8 reg_08_e2 = 0xf0;
- u8 reg_08_e6 = 0x0f;
-
- tm6000_get_std_res(dev);
-
- if (!dev->radio)
- input = &dev->vinput[dev->input];
- else
- input = &dev->rinput;
-
- if (dev->dev_type == TM6010) {
- switch (input->vmux) {
- case TM6000_VMUX_VIDEO_A:
- tm6000_set_reg(dev, TM6010_REQ08_RE3_ADC_IN1_SEL, 0xf4);
- tm6000_set_reg(dev, TM6010_REQ08_REA_BUFF_DRV_CTRL, 0xf1);
- tm6000_set_reg(dev, TM6010_REQ08_REB_SIF_GAIN_CTRL, 0xe0);
- tm6000_set_reg(dev, TM6010_REQ08_REC_REVERSE_YC_CTRL, 0xc2);
- tm6000_set_reg(dev, TM6010_REQ08_RED_GAIN_SEL, 0xe8);
- reg_07_fe |= 0x01;
- break;
- case TM6000_VMUX_VIDEO_B:
- tm6000_set_reg(dev, TM6010_REQ08_RE3_ADC_IN1_SEL, 0xf8);
- tm6000_set_reg(dev, TM6010_REQ08_REA_BUFF_DRV_CTRL, 0xf1);
- tm6000_set_reg(dev, TM6010_REQ08_REB_SIF_GAIN_CTRL, 0xe0);
- tm6000_set_reg(dev, TM6010_REQ08_REC_REVERSE_YC_CTRL, 0xc2);
- tm6000_set_reg(dev, TM6010_REQ08_RED_GAIN_SEL, 0xe8);
- reg_07_fe |= 0x01;
- break;
- case TM6000_VMUX_VIDEO_AB:
- tm6000_set_reg(dev, TM6010_REQ08_RE3_ADC_IN1_SEL, 0xfc);
- tm6000_set_reg(dev, TM6010_REQ08_RE4_ADC_IN2_SEL, 0xf8);
- reg_08_e6 = 0x00;
- tm6000_set_reg(dev, TM6010_REQ08_REA_BUFF_DRV_CTRL, 0xf2);
- tm6000_set_reg(dev, TM6010_REQ08_REB_SIF_GAIN_CTRL, 0xf0);
- tm6000_set_reg(dev, TM6010_REQ08_REC_REVERSE_YC_CTRL, 0xc2);
- tm6000_set_reg(dev, TM6010_REQ08_RED_GAIN_SEL, 0xe0);
- break;
- default:
- break;
- }
- switch (input->amux) {
- case TM6000_AMUX_ADC1:
- tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG,
- 0x00, 0x0f);
- /* Mux overflow workaround */
- tm6000_set_reg_mask(dev, TM6010_REQ07_R07_OUTPUT_CONTROL,
- 0x10, 0xf0);
- break;
- case TM6000_AMUX_ADC2:
- tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG,
- 0x08, 0x0f);
- /* Mux overflow workaround */
- tm6000_set_reg_mask(dev, TM6010_REQ07_R07_OUTPUT_CONTROL,
- 0x10, 0xf0);
- break;
- case TM6000_AMUX_SIF1:
- reg_08_e2 |= 0x02;
- reg_08_e6 = 0x08;
- reg_07_fe |= 0x40;
- reg_08_f1 |= 0x02;
- tm6000_set_reg(dev, TM6010_REQ08_RE4_ADC_IN2_SEL, 0xf3);
- tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG,
- 0x02, 0x0f);
- /* Mux overflow workaround */
- tm6000_set_reg_mask(dev, TM6010_REQ07_R07_OUTPUT_CONTROL,
- 0x30, 0xf0);
- break;
- case TM6000_AMUX_SIF2:
- reg_08_e2 |= 0x02;
- reg_08_e6 = 0x08;
- reg_07_fe |= 0x40;
- reg_08_f1 |= 0x02;
- tm6000_set_reg(dev, TM6010_REQ08_RE4_ADC_IN2_SEL, 0xf7);
- tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG,
- 0x02, 0x0f);
- /* Mux overflow workaround */
- tm6000_set_reg_mask(dev, TM6010_REQ07_R07_OUTPUT_CONTROL,
- 0x30, 0xf0);
- break;
- default:
- break;
- }
- tm6000_set_reg(dev, TM6010_REQ08_RE2_POWER_DOWN_CTRL1, reg_08_e2);
- tm6000_set_reg(dev, TM6010_REQ08_RE6_POWER_DOWN_CTRL2, reg_08_e6);
- tm6000_set_reg(dev, TM6010_REQ08_RF1_AADC_POWER_DOWN, reg_08_f1);
- tm6000_set_reg(dev, TM6010_REQ07_RFE_POWER_DOWN, reg_07_fe);
- } else {
- switch (input->vmux) {
- case TM6000_VMUX_VIDEO_A:
- tm6000_set_reg(dev, TM6000_REQ07_RE3_VADC_INP_LPF_SEL1, 0x10);
- tm6000_set_reg(dev, TM6000_REQ07_RE5_VADC_INP_LPF_SEL2, 0x00);
- tm6000_set_reg(dev, TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0x0f);
- tm6000_set_reg(dev,
- REQ_03_SET_GET_MCU_PIN, input->v_gpio, 0);
- break;
- case TM6000_VMUX_VIDEO_B:
- tm6000_set_reg(dev, TM6000_REQ07_RE3_VADC_INP_LPF_SEL1, 0x00);
- tm6000_set_reg(dev, TM6000_REQ07_RE5_VADC_INP_LPF_SEL2, 0x00);
- tm6000_set_reg(dev, TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0x0f);
- tm6000_set_reg(dev,
- REQ_03_SET_GET_MCU_PIN, input->v_gpio, 0);
- break;
- case TM6000_VMUX_VIDEO_AB:
- tm6000_set_reg(dev, TM6000_REQ07_RE3_VADC_INP_LPF_SEL1, 0x10);
- tm6000_set_reg(dev, TM6000_REQ07_RE5_VADC_INP_LPF_SEL2, 0x10);
- tm6000_set_reg(dev, TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0x00);
- tm6000_set_reg(dev,
- REQ_03_SET_GET_MCU_PIN, input->v_gpio, 1);
- break;
- default:
- break;
- }
- switch (input->amux) {
- case TM6000_AMUX_ADC1:
- tm6000_set_reg_mask(dev,
- TM6000_REQ07_REB_VADC_AADC_MODE, 0x00, 0x0f);
- break;
- case TM6000_AMUX_ADC2:
- tm6000_set_reg_mask(dev,
- TM6000_REQ07_REB_VADC_AADC_MODE, 0x04, 0x0f);
- break;
- default:
- break;
- }
- }
- if (input->type == TM6000_INPUT_SVIDEO) {
- for (i = 0; i < ARRAY_SIZE(svideo_stds); i++) {
- if (dev->norm & svideo_stds[i].id) {
- rc = tm6000_load_std(dev, svideo_stds[i].common);
- goto ret;
- }
- }
- return -EINVAL;
- } else {
- for (i = 0; i < ARRAY_SIZE(composite_stds); i++) {
- if (dev->norm & composite_stds[i].id) {
- rc = tm6000_load_std(dev, composite_stds[i].common);
- goto ret;
- }
- }
- return -EINVAL;
- }
-
-ret:
- if (rc < 0)
- return rc;
-
- if ((dev->dev_type == TM6010) &&
- ((input->amux == TM6000_AMUX_SIF1) ||
- (input->amux == TM6000_AMUX_SIF2)))
- tm6000_set_audio_std(dev);
-
- msleep(40);
-
- return 0;
-}
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * tm6000-buf.c - driver for TM5600/TM6000/TM6010 USB video capture devices
- *
- * Copyright (c) 2006-2007 Mauro Carvalho Chehab <mchehab@kernel.org>
- */
-
-#include <linux/videodev2.h>
-
-#define TM6000_URB_MSG_LEN 180
-
-struct usb_isoc_ctl {
- /* max packet size of isoc transaction */
- int max_pkt_size;
-
- /* number of allocated urbs */
- int num_bufs;
-
- /* urb for isoc transfers */
- struct urb **urb;
-
- /* transfer buffers for isoc transfer */
- char **transfer_buffer;
-
- /* Last buffer command and region */
- u8 cmd;
- int pos, size, pktsize;
-
- /* Last field: ODD or EVEN? */
- int vfield, field;
-
- /* Stores incomplete commands */
- u32 tmp_buf;
- int tmp_buf_len;
-
- /* Stores already requested buffers */
- struct tm6000_buffer *buf;
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-// tm6000-video.c - driver for TM5600/TM6000/TM6010 USB video capture devices
-//
-// Copyright (c) 2006-2007 Mauro Carvalho Chehab <mchehab@kernel.org>
-//
-// Copyright (c) 2007 Michel Ludwig <michel.ludwig@gmail.com>
-// - Fixed module load/unload
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/random.h>
-#include <linux/usb.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-ioctl.h>
-#include <media/v4l2-event.h>
-#include <media/tuner.h>
-#include <linux/interrupt.h>
-#include <linux/kthread.h>
-#include <linux/highmem.h>
-#include <linux/freezer.h>
-
-#include "tm6000-regs.h"
-#include "tm6000.h"
-
-#define BUFFER_TIMEOUT msecs_to_jiffies(2000) /* 2 seconds */
-
-/* Limits minimum and default number of buffers */
-#define TM6000_MIN_BUF 4
-#define TM6000_DEF_BUF 8
-
-#define TM6000_NUM_URB_BUF 8
-
-#define TM6000_MAX_ISO_PACKETS 46 /* Max number of ISO packets */
-
-/* Declare static vars that will be used as parameters */
-static unsigned int vid_limit = 16; /* Video memory limit, in Mb */
-static int video_nr = -1; /* /dev/videoN, -1 for autodetect */
-static int radio_nr = -1; /* /dev/radioN, -1 for autodetect */
-static bool keep_urb; /* keep urb buffers allocated */
-
-/* Debug level */
-int tm6000_debug;
-EXPORT_SYMBOL_GPL(tm6000_debug);
-
-static struct tm6000_fmt format[] = {
- {
- .fourcc = V4L2_PIX_FMT_YUYV,
- .depth = 16,
- }, {
- .fourcc = V4L2_PIX_FMT_UYVY,
- .depth = 16,
- }, {
- .fourcc = V4L2_PIX_FMT_TM6000,
- .depth = 16,
- }
-};
-
-/* ------------------------------------------------------------------
- * DMA and thread functions
- * ------------------------------------------------------------------
- */
-
-#define norm_maxw(a) 720
-#define norm_maxh(a) 576
-
-#define norm_minw(a) norm_maxw(a)
-#define norm_minh(a) norm_maxh(a)
-
-/*
- * video-buf generic routine to get the next available buffer
- */
-static inline void get_next_buf(struct tm6000_dmaqueue *dma_q,
- struct tm6000_buffer **buf)
-{
- struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq);
-
- if (list_empty(&dma_q->active)) {
- dprintk(dev, V4L2_DEBUG_QUEUE, "No active queue to serve\n");
- *buf = NULL;
- return;
- }
-
- *buf = list_entry(dma_q->active.next,
- struct tm6000_buffer, vb.queue);
-}
-
-/*
- * Announces that a buffer were filled and request the next
- */
-static inline void buffer_filled(struct tm6000_core *dev,
- struct tm6000_dmaqueue *dma_q,
- struct tm6000_buffer *buf)
-{
- /* Advice that buffer was filled */
- dprintk(dev, V4L2_DEBUG_ISOC, "[%p/%d] wakeup\n", buf, buf->vb.i);
- buf->vb.state = VIDEOBUF_DONE;
- buf->vb.field_count++;
- buf->vb.ts = ktime_get_ns();
-
- list_del(&buf->vb.queue);
- wake_up(&buf->vb.done);
-}
-
-/*
- * Identify the tm5600/6000 buffer header type and properly handles
- */
-static int copy_streams(u8 *data, unsigned long len,
- struct urb *urb)
-{
- struct tm6000_dmaqueue *dma_q = urb->context;
- struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq);
- u8 *ptr = data, *endp = data+len;
- unsigned long header = 0;
- int rc = 0;
- unsigned int cmd, cpysize, pktsize, size, field, block, line, pos = 0;
- struct tm6000_buffer *vbuf = NULL;
- char *voutp = NULL;
- unsigned int linewidth;
-
- if (!dev->radio) {
- /* get video buffer */
- get_next_buf(dma_q, &vbuf);
-
- if (!vbuf)
- return rc;
- voutp = videobuf_to_vmalloc(&vbuf->vb);
-
- if (!voutp)
- return 0;
- }
-
- for (ptr = data; ptr < endp;) {
- if (!dev->isoc_ctl.cmd) {
- /* Header */
- if (dev->isoc_ctl.tmp_buf_len > 0) {
- /* from last urb or packet */
- header = dev->isoc_ctl.tmp_buf;
- if (4 - dev->isoc_ctl.tmp_buf_len > 0) {
- memcpy((u8 *)&header +
- dev->isoc_ctl.tmp_buf_len,
- ptr,
- 4 - dev->isoc_ctl.tmp_buf_len);
- ptr += 4 - dev->isoc_ctl.tmp_buf_len;
- }
- dev->isoc_ctl.tmp_buf_len = 0;
- } else {
- if (ptr + 3 >= endp) {
- /* have incomplete header */
- dev->isoc_ctl.tmp_buf_len = endp - ptr;
- memcpy(&dev->isoc_ctl.tmp_buf, ptr,
- dev->isoc_ctl.tmp_buf_len);
- return rc;
- }
- /* Seek for sync */
- for (; ptr < endp - 3; ptr++) {
- if (*(ptr + 3) == 0x47)
- break;
- }
- /* Get message header */
- header = *(unsigned long *)ptr;
- ptr += 4;
- }
-
- /* split the header fields */
- size = ((header & 0x7e) << 1);
- if (size > 0)
- size -= 4;
- block = (header >> 7) & 0xf;
- field = (header >> 11) & 0x1;
- line = (header >> 12) & 0x1ff;
- cmd = (header >> 21) & 0x7;
- /* Validates header fields */
- if (size > TM6000_URB_MSG_LEN)
- size = TM6000_URB_MSG_LEN;
- pktsize = TM6000_URB_MSG_LEN;
- /*
- * calculate position in buffer and change the buffer
- */
- switch (cmd) {
- case TM6000_URB_MSG_VIDEO:
- if (!dev->radio) {
- if ((dev->isoc_ctl.vfield != field) &&
- (field == 1)) {
- /*
- * Announces that a new buffer
- * were filled
- */
- buffer_filled(dev, dma_q, vbuf);
- dprintk(dev, V4L2_DEBUG_ISOC,
- "new buffer filled\n");
- get_next_buf(dma_q, &vbuf);
- if (!vbuf)
- return rc;
- voutp = videobuf_to_vmalloc(&vbuf->vb);
- if (!voutp)
- return rc;
- memset(voutp, 0, vbuf->vb.size);
- }
- linewidth = vbuf->vb.width << 1;
- pos = ((line << 1) - field - 1) *
- linewidth + block * TM6000_URB_MSG_LEN;
- /* Don't allow to write out of the buffer */
- if (pos + size > vbuf->vb.size)
- cmd = TM6000_URB_MSG_ERR;
- dev->isoc_ctl.vfield = field;
- }
- break;
- case TM6000_URB_MSG_VBI:
- break;
- case TM6000_URB_MSG_AUDIO:
- case TM6000_URB_MSG_PTS:
- size = pktsize; /* Size is always 180 bytes */
- break;
- }
- } else {
- /* Continue the last copy */
- cmd = dev->isoc_ctl.cmd;
- size = dev->isoc_ctl.size;
- pos = dev->isoc_ctl.pos;
- pktsize = dev->isoc_ctl.pktsize;
- field = dev->isoc_ctl.field;
- }
- cpysize = (endp - ptr > size) ? size : endp - ptr;
- if (cpysize) {
- /* copy data in different buffers */
- switch (cmd) {
- case TM6000_URB_MSG_VIDEO:
- /* Fills video buffer */
- if (vbuf)
- memcpy(&voutp[pos], ptr, cpysize);
- break;
- case TM6000_URB_MSG_AUDIO: {
- int i;
- for (i = 0; i < cpysize; i += 2)
- swab16s((u16 *)(ptr + i));
-
- tm6000_call_fillbuf(dev, TM6000_AUDIO, ptr, cpysize);
- break;
- }
- case TM6000_URB_MSG_VBI:
- /* Need some code to copy vbi buffer */
- break;
- case TM6000_URB_MSG_PTS: {
- /* Need some code to copy pts */
- u32 pts;
- pts = *(u32 *)ptr;
- dprintk(dev, V4L2_DEBUG_ISOC, "field %d, PTS %x",
- field, pts);
- break;
- }
- }
- }
- if (ptr + pktsize > endp) {
- /*
- * End of URB packet, but cmd processing is not
- * complete. Preserve the state for a next packet
- */
- dev->isoc_ctl.pos = pos + cpysize;
- dev->isoc_ctl.size = size - cpysize;
- dev->isoc_ctl.cmd = cmd;
- dev->isoc_ctl.field = field;
- dev->isoc_ctl.pktsize = pktsize - (endp - ptr);
- ptr += endp - ptr;
- } else {
- dev->isoc_ctl.cmd = 0;
- ptr += pktsize;
- }
- }
- return 0;
-}
-
-/*
- * Identify the tm5600/6000 buffer header type and properly handles
- */
-static int copy_multiplexed(u8 *ptr, unsigned long len,
- struct urb *urb)
-{
- struct tm6000_dmaqueue *dma_q = urb->context;
- struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq);
- unsigned int pos = dev->isoc_ctl.pos, cpysize;
- int rc = 1;
- struct tm6000_buffer *buf;
- char *outp = NULL;
-
- get_next_buf(dma_q, &buf);
- if (buf)
- outp = videobuf_to_vmalloc(&buf->vb);
-
- if (!outp)
- return 0;
-
- while (len > 0) {
- cpysize = min(len, buf->vb.size-pos);
- memcpy(&outp[pos], ptr, cpysize);
- pos += cpysize;
- ptr += cpysize;
- len -= cpysize;
- if (pos >= buf->vb.size) {
- pos = 0;
- /* Announces that a new buffer were filled */
- buffer_filled(dev, dma_q, buf);
- dprintk(dev, V4L2_DEBUG_ISOC, "new buffer filled\n");
- get_next_buf(dma_q, &buf);
- if (!buf)
- break;
- outp = videobuf_to_vmalloc(&(buf->vb));
- if (!outp)
- return rc;
- pos = 0;
- }
- }
-
- dev->isoc_ctl.pos = pos;
- return rc;
-}
-
-static inline void print_err_status(struct tm6000_core *dev,
- int packet, int status)
-{
- char *errmsg = "Unknown";
-
- switch (status) {
- case -ENOENT:
- errmsg = "unlinked synchronously";
- break;
- case -ECONNRESET:
- errmsg = "unlinked asynchronously";
- break;
- case -ENOSR:
- errmsg = "Buffer error (overrun)";
- break;
- case -EPIPE:
- errmsg = "Stalled (device not responding)";
- break;
- case -EOVERFLOW:
- errmsg = "Babble (bad cable?)";
- break;
- case -EPROTO:
- errmsg = "Bit-stuff error (bad cable?)";
- break;
- case -EILSEQ:
- errmsg = "CRC/Timeout (could be anything)";
- break;
- case -ETIME:
- errmsg = "Device does not respond";
- break;
- }
- if (packet < 0) {
- dprintk(dev, V4L2_DEBUG_QUEUE, "URB status %d [%s].\n",
- status, errmsg);
- } else {
- dprintk(dev, V4L2_DEBUG_QUEUE, "URB packet %d, status %d [%s].\n",
- packet, status, errmsg);
- }
-}
-
-
-/*
- * Controls the isoc copy of each urb packet
- */
-static inline int tm6000_isoc_copy(struct urb *urb)
-{
- struct tm6000_dmaqueue *dma_q = urb->context;
- struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq);
- int i, len = 0, rc = 1, status;
- char *p;
-
- if (urb->status < 0) {
- print_err_status(dev, -1, urb->status);
- return 0;
- }
-
- for (i = 0; i < urb->number_of_packets; i++) {
- status = urb->iso_frame_desc[i].status;
-
- if (status < 0) {
- print_err_status(dev, i, status);
- continue;
- }
-
- len = urb->iso_frame_desc[i].actual_length;
-
- if (len > 0) {
- p = urb->transfer_buffer + urb->iso_frame_desc[i].offset;
- if (!urb->iso_frame_desc[i].status) {
- if ((dev->fourcc) == V4L2_PIX_FMT_TM6000) {
- rc = copy_multiplexed(p, len, urb);
- if (rc <= 0)
- return rc;
- } else {
- copy_streams(p, len, urb);
- }
- }
- }
- }
- return rc;
-}
-
-/* ------------------------------------------------------------------
- * URB control
- * ------------------------------------------------------------------
- */
-
-/*
- * IRQ callback, called by URB callback
- */
-static void tm6000_irq_callback(struct urb *urb)
-{
- struct tm6000_dmaqueue *dma_q = urb->context;
- struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq);
- unsigned long flags;
- int i;
-
- switch (urb->status) {
- case 0:
- case -ETIMEDOUT:
- break;
-
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- return;
-
- default:
- tm6000_err("urb completion error %d.\n", urb->status);
- break;
- }
-
- spin_lock_irqsave(&dev->slock, flags);
- tm6000_isoc_copy(urb);
- spin_unlock_irqrestore(&dev->slock, flags);
-
- /* Reset urb buffers */
- for (i = 0; i < urb->number_of_packets; i++) {
- urb->iso_frame_desc[i].status = 0;
- urb->iso_frame_desc[i].actual_length = 0;
- }
-
- urb->status = usb_submit_urb(urb, GFP_ATOMIC);
- if (urb->status)
- tm6000_err("urb resubmit failed (error=%i)\n",
- urb->status);
-}
-
-/*
- * Allocate URB buffers
- */
-static int tm6000_alloc_urb_buffers(struct tm6000_core *dev)
-{
- int num_bufs = TM6000_NUM_URB_BUF;
- int i;
-
- if (dev->urb_buffer)
- return 0;
-
- dev->urb_buffer = kmalloc_array(num_bufs, sizeof(*dev->urb_buffer),
- GFP_KERNEL);
- if (!dev->urb_buffer)
- return -ENOMEM;
-
- dev->urb_dma = kmalloc_array(num_bufs, sizeof(*dev->urb_dma),
- GFP_KERNEL);
- if (!dev->urb_dma)
- return -ENOMEM;
-
- for (i = 0; i < num_bufs; i++) {
- dev->urb_buffer[i] = usb_alloc_coherent(
- dev->udev, dev->urb_size,
- GFP_KERNEL, &dev->urb_dma[i]);
- if (!dev->urb_buffer[i]) {
- tm6000_err("unable to allocate %i bytes for transfer buffer %i\n",
- dev->urb_size, i);
- return -ENOMEM;
- }
- memset(dev->urb_buffer[i], 0, dev->urb_size);
- }
-
- return 0;
-}
-
-/*
- * Free URB buffers
- */
-static int tm6000_free_urb_buffers(struct tm6000_core *dev)
-{
- int i;
-
- if (!dev->urb_buffer)
- return 0;
-
- for (i = 0; i < TM6000_NUM_URB_BUF; i++) {
- if (dev->urb_buffer[i]) {
- usb_free_coherent(dev->udev,
- dev->urb_size,
- dev->urb_buffer[i],
- dev->urb_dma[i]);
- dev->urb_buffer[i] = NULL;
- }
- }
- kfree(dev->urb_buffer);
- kfree(dev->urb_dma);
- dev->urb_buffer = NULL;
- dev->urb_dma = NULL;
-
- return 0;
-}
-
-/*
- * Stop and Deallocate URBs
- */
-static void tm6000_uninit_isoc(struct tm6000_core *dev)
-{
- struct urb *urb;
- int i;
-
- dev->isoc_ctl.buf = NULL;
- for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
- urb = dev->isoc_ctl.urb[i];
- if (urb) {
- usb_kill_urb(urb);
- usb_unlink_urb(urb);
- usb_free_urb(urb);
- dev->isoc_ctl.urb[i] = NULL;
- }
- dev->isoc_ctl.transfer_buffer[i] = NULL;
- }
-
- if (!keep_urb)
- tm6000_free_urb_buffers(dev);
-
- kfree(dev->isoc_ctl.urb);
- kfree(dev->isoc_ctl.transfer_buffer);
-
- dev->isoc_ctl.urb = NULL;
- dev->isoc_ctl.transfer_buffer = NULL;
- dev->isoc_ctl.num_bufs = 0;
-}
-
-/*
- * Assign URBs and start IRQ
- */
-static int tm6000_prepare_isoc(struct tm6000_core *dev)
-{
- struct tm6000_dmaqueue *dma_q = &dev->vidq;
- int i, j, sb_size, pipe, size, max_packets;
- int num_bufs = TM6000_NUM_URB_BUF;
- struct urb *urb;
-
- /* De-allocates all pending stuff */
- tm6000_uninit_isoc(dev);
- /* Stop interrupt USB pipe */
- tm6000_ir_int_stop(dev);
-
- usb_set_interface(dev->udev,
- dev->isoc_in.bInterfaceNumber,
- dev->isoc_in.bAlternateSetting);
-
- /* Start interrupt USB pipe */
- tm6000_ir_int_start(dev);
-
- pipe = usb_rcvisocpipe(dev->udev,
- dev->isoc_in.endp->desc.bEndpointAddress &
- USB_ENDPOINT_NUMBER_MASK);
-
- size = usb_maxpacket(dev->udev, pipe);
-
- if (size > dev->isoc_in.maxsize)
- size = dev->isoc_in.maxsize;
-
- dev->isoc_ctl.max_pkt_size = size;
-
- max_packets = TM6000_MAX_ISO_PACKETS;
- sb_size = max_packets * size;
- dev->urb_size = sb_size;
-
- dev->isoc_ctl.num_bufs = num_bufs;
-
- dev->isoc_ctl.urb = kmalloc_array(num_bufs, sizeof(void *),
- GFP_KERNEL);
- if (!dev->isoc_ctl.urb)
- return -ENOMEM;
-
- dev->isoc_ctl.transfer_buffer = kmalloc_array(num_bufs,
- sizeof(void *),
- GFP_KERNEL);
- if (!dev->isoc_ctl.transfer_buffer) {
- kfree(dev->isoc_ctl.urb);
- return -ENOMEM;
- }
-
- dprintk(dev, V4L2_DEBUG_QUEUE, "Allocating %d x %d packets (%d bytes) of %d bytes each to handle %u size\n",
- max_packets, num_bufs, sb_size,
- dev->isoc_in.maxsize, size);
-
-
- if (tm6000_alloc_urb_buffers(dev) < 0) {
- tm6000_err("cannot allocate memory for urb buffers\n");
-
- /* call free, as some buffers might have been allocated */
- tm6000_free_urb_buffers(dev);
- kfree(dev->isoc_ctl.urb);
- kfree(dev->isoc_ctl.transfer_buffer);
- return -ENOMEM;
- }
-
- /* allocate urbs and transfer buffers */
- for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
- urb = usb_alloc_urb(max_packets, GFP_KERNEL);
- if (!urb) {
- tm6000_uninit_isoc(dev);
- tm6000_free_urb_buffers(dev);
- return -ENOMEM;
- }
- dev->isoc_ctl.urb[i] = urb;
-
- urb->transfer_dma = dev->urb_dma[i];
- dev->isoc_ctl.transfer_buffer[i] = dev->urb_buffer[i];
-
- usb_fill_bulk_urb(urb, dev->udev, pipe,
- dev->isoc_ctl.transfer_buffer[i], sb_size,
- tm6000_irq_callback, dma_q);
- urb->interval = dev->isoc_in.endp->desc.bInterval;
- urb->number_of_packets = max_packets;
- urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
-
- for (j = 0; j < max_packets; j++) {
- urb->iso_frame_desc[j].offset = size * j;
- urb->iso_frame_desc[j].length = size;
- }
- }
-
- return 0;
-}
-
-static int tm6000_start_thread(struct tm6000_core *dev)
-{
- struct tm6000_dmaqueue *dma_q = &dev->vidq;
- int i;
-
- dma_q->frame = 0;
- dma_q->ini_jiffies = jiffies;
-
- init_waitqueue_head(&dma_q->wq);
-
- /* submit urbs and enables IRQ */
- for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
- int rc = usb_submit_urb(dev->isoc_ctl.urb[i], GFP_ATOMIC);
- if (rc) {
- tm6000_err("submit of urb %i failed (error=%i)\n", i,
- rc);
- tm6000_uninit_isoc(dev);
- return rc;
- }
- }
-
- return 0;
-}
-
-/* ------------------------------------------------------------------
- * Videobuf operations
- * ------------------------------------------------------------------
- */
-
-static int
-buffer_setup(struct videobuf_queue *vq, unsigned int *count, unsigned int *size)
-{
- struct tm6000_fh *fh = vq->priv_data;
-
- *size = fh->fmt->depth * fh->width * fh->height >> 3;
- if (0 == *count)
- *count = TM6000_DEF_BUF;
-
- if (*count < TM6000_MIN_BUF)
- *count = TM6000_MIN_BUF;
-
- while (*size * *count > vid_limit * 1024 * 1024)
- (*count)--;
-
- return 0;
-}
-
-static void free_buffer(struct videobuf_queue *vq, struct tm6000_buffer *buf)
-{
- struct tm6000_fh *fh = vq->priv_data;
- struct tm6000_core *dev = fh->dev;
- unsigned long flags;
-
- /* We used to wait for the buffer to finish here, but this didn't work
- because, as we were keeping the state as VIDEOBUF_QUEUED,
- videobuf_queue_cancel marked it as finished for us.
- (Also, it could wedge forever if the hardware was misconfigured.)
-
- This should be safe; by the time we get here, the buffer isn't
- queued anymore. If we ever start marking the buffers as
- VIDEOBUF_ACTIVE, it won't be, though.
- */
- spin_lock_irqsave(&dev->slock, flags);
- if (dev->isoc_ctl.buf == buf)
- dev->isoc_ctl.buf = NULL;
- spin_unlock_irqrestore(&dev->slock, flags);
-
- videobuf_vmalloc_free(&buf->vb);
- buf->vb.state = VIDEOBUF_NEEDS_INIT;
-}
-
-static int
-buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb,
- enum v4l2_field field)
-{
- struct tm6000_fh *fh = vq->priv_data;
- struct tm6000_buffer *buf = container_of(vb, struct tm6000_buffer, vb);
- struct tm6000_core *dev = fh->dev;
- int rc = 0;
-
- BUG_ON(NULL == fh->fmt);
-
-
- /* FIXME: It assumes depth=2 */
- /* The only currently supported format is 16 bits/pixel */
- buf->vb.size = fh->fmt->depth*fh->width*fh->height >> 3;
- if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size)
- return -EINVAL;
-
- if (buf->fmt != fh->fmt ||
- buf->vb.width != fh->width ||
- buf->vb.height != fh->height ||
- buf->vb.field != field) {
- buf->fmt = fh->fmt;
- buf->vb.width = fh->width;
- buf->vb.height = fh->height;
- buf->vb.field = field;
- buf->vb.state = VIDEOBUF_NEEDS_INIT;
- }
-
- if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
- rc = videobuf_iolock(vq, &buf->vb, NULL);
- if (rc != 0)
- goto fail;
- }
-
- if (!dev->isoc_ctl.num_bufs) {
- rc = tm6000_prepare_isoc(dev);
- if (rc < 0)
- goto fail;
-
- rc = tm6000_start_thread(dev);
- if (rc < 0)
- goto fail;
-
- }
-
- buf->vb.state = VIDEOBUF_PREPARED;
- return 0;
-
-fail:
- free_buffer(vq, buf);
- return rc;
-}
-
-static void
-buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
-{
- struct tm6000_buffer *buf = container_of(vb, struct tm6000_buffer, vb);
- struct tm6000_fh *fh = vq->priv_data;
- struct tm6000_core *dev = fh->dev;
- struct tm6000_dmaqueue *vidq = &dev->vidq;
-
- buf->vb.state = VIDEOBUF_QUEUED;
- list_add_tail(&buf->vb.queue, &vidq->active);
-}
-
-static void buffer_release(struct videobuf_queue *vq, struct videobuf_buffer *vb)
-{
- struct tm6000_buffer *buf = container_of(vb, struct tm6000_buffer, vb);
-
- free_buffer(vq, buf);
-}
-
-static const struct videobuf_queue_ops tm6000_video_qops = {
- .buf_setup = buffer_setup,
- .buf_prepare = buffer_prepare,
- .buf_queue = buffer_queue,
- .buf_release = buffer_release,
-};
-
-/* ------------------------------------------------------------------
- * IOCTL handling
- * ------------------------------------------------------------------
- */
-
-static bool is_res_read(struct tm6000_core *dev, struct tm6000_fh *fh)
-{
- /* Is the current fh handling it? if so, that's OK */
- if (dev->resources == fh && dev->is_res_read)
- return true;
-
- return false;
-}
-
-static bool is_res_streaming(struct tm6000_core *dev, struct tm6000_fh *fh)
-{
- /* Is the current fh handling it? if so, that's OK */
- if (dev->resources == fh)
- return true;
-
- return false;
-}
-
-static bool res_get(struct tm6000_core *dev, struct tm6000_fh *fh,
- bool is_res_read)
-{
- /* Is the current fh handling it? if so, that's OK */
- if (dev->resources == fh && dev->is_res_read == is_res_read)
- return true;
-
- /* is it free? */
- if (dev->resources)
- return false;
-
- /* grab it */
- dev->resources = fh;
- dev->is_res_read = is_res_read;
- dprintk(dev, V4L2_DEBUG_RES_LOCK, "res: get\n");
- return true;
-}
-
-static void res_free(struct tm6000_core *dev, struct tm6000_fh *fh)
-{
- /* Is the current fh handling it? if so, that's OK */
- if (dev->resources != fh)
- return;
-
- dev->resources = NULL;
- dprintk(dev, V4L2_DEBUG_RES_LOCK, "res: put\n");
-}
-
-/* ------------------------------------------------------------------
- * IOCTL vidioc handling
- * ------------------------------------------------------------------
- */
-static int vidioc_querycap(struct file *file, void *priv,
- struct v4l2_capability *cap)
-{
- struct tm6000_core *dev = ((struct tm6000_fh *)priv)->dev;
-
- strscpy(cap->driver, "tm6000", sizeof(cap->driver));
- strscpy(cap->card, "Trident TM5600/6000/6010", sizeof(cap->card));
- usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info));
- cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
- V4L2_CAP_DEVICE_CAPS;
- if (dev->tuner_type != TUNER_ABSENT)
- cap->capabilities |= V4L2_CAP_TUNER;
- if (dev->caps.has_radio)
- cap->capabilities |= V4L2_CAP_RADIO;
-
- return 0;
-}
-
-static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv,
- struct v4l2_fmtdesc *f)
-{
- if (f->index >= ARRAY_SIZE(format))
- return -EINVAL;
-
- f->pixelformat = format[f->index].fourcc;
- return 0;
-}
-
-static int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
- struct v4l2_format *f)
-{
- struct tm6000_fh *fh = priv;
-
- f->fmt.pix.width = fh->width;
- f->fmt.pix.height = fh->height;
- f->fmt.pix.field = fh->vb_vidq.field;
- f->fmt.pix.pixelformat = fh->fmt->fourcc;
- f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
- f->fmt.pix.bytesperline =
- (f->fmt.pix.width * fh->fmt->depth) >> 3;
- f->fmt.pix.sizeimage =
- f->fmt.pix.height * f->fmt.pix.bytesperline;
-
- return 0;
-}
-
-static struct tm6000_fmt *format_by_fourcc(unsigned int fourcc)
-{
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(format); i++)
- if (format[i].fourcc == fourcc)
- return format+i;
- return NULL;
-}
-
-static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
- struct v4l2_format *f)
-{
- struct tm6000_core *dev = ((struct tm6000_fh *)priv)->dev;
- struct tm6000_fmt *fmt;
- enum v4l2_field field;
-
- fmt = format_by_fourcc(f->fmt.pix.pixelformat);
- if (NULL == fmt) {
- dprintk(dev, 2, "Fourcc format (0x%08x) invalid.\n",
- f->fmt.pix.pixelformat);
- return -EINVAL;
- }
-
- field = V4L2_FIELD_INTERLACED;
-
- tm6000_get_std_res(dev);
-
- f->fmt.pix.width = dev->width;
- f->fmt.pix.height = dev->height;
-
- f->fmt.pix.width &= ~0x01;
-
- f->fmt.pix.field = field;
-
- f->fmt.pix.bytesperline =
- (f->fmt.pix.width * fmt->depth) >> 3;
- f->fmt.pix.sizeimage =
- f->fmt.pix.height * f->fmt.pix.bytesperline;
- f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
-
- return 0;
-}
-
-/*FIXME: This seems to be generic enough to be at videodev2 */
-static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
- struct v4l2_format *f)
-{
- struct tm6000_fh *fh = priv;
- struct tm6000_core *dev = fh->dev;
- int ret = vidioc_try_fmt_vid_cap(file, fh, f);
- if (ret < 0)
- return ret;
-
- fh->fmt = format_by_fourcc(f->fmt.pix.pixelformat);
- fh->width = f->fmt.pix.width;
- fh->height = f->fmt.pix.height;
- fh->vb_vidq.field = f->fmt.pix.field;
- fh->type = f->type;
-
- dev->fourcc = f->fmt.pix.pixelformat;
-
- tm6000_set_fourcc_format(dev);
-
- return 0;
-}
-
-static int vidioc_reqbufs(struct file *file, void *priv,
- struct v4l2_requestbuffers *p)
-{
- struct tm6000_fh *fh = priv;
-
- return videobuf_reqbufs(&fh->vb_vidq, p);
-}
-
-static int vidioc_querybuf(struct file *file, void *priv,
- struct v4l2_buffer *p)
-{
- struct tm6000_fh *fh = priv;
-
- return videobuf_querybuf(&fh->vb_vidq, p);
-}
-
-static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *p)
-{
- struct tm6000_fh *fh = priv;
-
- return videobuf_qbuf(&fh->vb_vidq, p);
-}
-
-static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p)
-{
- struct tm6000_fh *fh = priv;
-
- return videobuf_dqbuf(&fh->vb_vidq, p,
- file->f_flags & O_NONBLOCK);
-}
-
-static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
-{
- struct tm6000_fh *fh = priv;
- struct tm6000_core *dev = fh->dev;
-
- if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
- if (i != fh->type)
- return -EINVAL;
-
- if (!res_get(dev, fh, false))
- return -EBUSY;
- return videobuf_streamon(&fh->vb_vidq);
-}
-
-static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
-{
- struct tm6000_fh *fh = priv;
- struct tm6000_core *dev = fh->dev;
-
- if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- if (i != fh->type)
- return -EINVAL;
-
- videobuf_streamoff(&fh->vb_vidq);
- res_free(dev, fh);
-
- return 0;
-}
-
-static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id norm)
-{
- int rc = 0;
- struct tm6000_fh *fh = priv;
- struct tm6000_core *dev = fh->dev;
-
- dev->norm = norm;
- rc = tm6000_init_analog_mode(dev);
-
- fh->width = dev->width;
- fh->height = dev->height;
-
- if (rc < 0)
- return rc;
-
- v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_std, dev->norm);
-
- return 0;
-}
-
-static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *norm)
-{
- struct tm6000_fh *fh = priv;
- struct tm6000_core *dev = fh->dev;
-
- *norm = dev->norm;
- return 0;
-}
-
-static const char *iname[] = {
- [TM6000_INPUT_TV] = "Television",
- [TM6000_INPUT_COMPOSITE1] = "Composite 1",
- [TM6000_INPUT_COMPOSITE2] = "Composite 2",
- [TM6000_INPUT_SVIDEO] = "S-Video",
-};
-
-static int vidioc_enum_input(struct file *file, void *priv,
- struct v4l2_input *i)
-{
- struct tm6000_fh *fh = priv;
- struct tm6000_core *dev = fh->dev;
- unsigned int n;
-
- n = i->index;
- if (n >= 3)
- return -EINVAL;
-
- if (!dev->vinput[n].type)
- return -EINVAL;
-
- i->index = n;
-
- if (dev->vinput[n].type == TM6000_INPUT_TV)
- i->type = V4L2_INPUT_TYPE_TUNER;
- else
- i->type = V4L2_INPUT_TYPE_CAMERA;
-
- strscpy(i->name, iname[dev->vinput[n].type], sizeof(i->name));
-
- i->std = TM6000_STD;
-
- return 0;
-}
-
-static int vidioc_g_input(struct file *file, void *priv, unsigned int *i)
-{
- struct tm6000_fh *fh = priv;
- struct tm6000_core *dev = fh->dev;
-
- *i = dev->input;
-
- return 0;
-}
-
-static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
-{
- struct tm6000_fh *fh = priv;
- struct tm6000_core *dev = fh->dev;
- int rc = 0;
-
- if (i >= 3)
- return -EINVAL;
- if (!dev->vinput[i].type)
- return -EINVAL;
-
- dev->input = i;
-
- rc = vidioc_s_std(file, priv, dev->norm);
-
- return rc;
-}
-
-/* --- controls ---------------------------------------------- */
-
-static int tm6000_s_ctrl(struct v4l2_ctrl *ctrl)
-{
- struct tm6000_core *dev = container_of(ctrl->handler, struct tm6000_core, ctrl_handler);
- u8 val = ctrl->val;
-
- switch (ctrl->id) {
- case V4L2_CID_CONTRAST:
- tm6000_set_reg(dev, TM6010_REQ07_R08_LUMA_CONTRAST_ADJ, val);
- return 0;
- case V4L2_CID_BRIGHTNESS:
- tm6000_set_reg(dev, TM6010_REQ07_R09_LUMA_BRIGHTNESS_ADJ, val);
- return 0;
- case V4L2_CID_SATURATION:
- tm6000_set_reg(dev, TM6010_REQ07_R0A_CHROMA_SATURATION_ADJ, val);
- return 0;
- case V4L2_CID_HUE:
- tm6000_set_reg(dev, TM6010_REQ07_R0B_CHROMA_HUE_PHASE_ADJ, val);
- return 0;
- }
- return -EINVAL;
-}
-
-static const struct v4l2_ctrl_ops tm6000_ctrl_ops = {
- .s_ctrl = tm6000_s_ctrl,
-};
-
-static int tm6000_radio_s_ctrl(struct v4l2_ctrl *ctrl)
-{
- struct tm6000_core *dev = container_of(ctrl->handler,
- struct tm6000_core, radio_ctrl_handler);
- u8 val = ctrl->val;
-
- switch (ctrl->id) {
- case V4L2_CID_AUDIO_MUTE:
- dev->ctl_mute = val;
- tm6000_tvaudio_set_mute(dev, val);
- return 0;
- case V4L2_CID_AUDIO_VOLUME:
- dev->ctl_volume = val;
- tm6000_set_volume(dev, val);
- return 0;
- }
- return -EINVAL;
-}
-
-static const struct v4l2_ctrl_ops tm6000_radio_ctrl_ops = {
- .s_ctrl = tm6000_radio_s_ctrl,
-};
-
-static int vidioc_g_tuner(struct file *file, void *priv,
- struct v4l2_tuner *t)
-{
- struct tm6000_fh *fh = priv;
- struct tm6000_core *dev = fh->dev;
-
- if (UNSET == dev->tuner_type)
- return -ENOTTY;
- if (0 != t->index)
- return -EINVAL;
-
- strscpy(t->name, "Television", sizeof(t->name));
- t->type = V4L2_TUNER_ANALOG_TV;
- t->capability = V4L2_TUNER_CAP_NORM | V4L2_TUNER_CAP_STEREO;
- t->rangehigh = 0xffffffffUL;
- t->rxsubchans = V4L2_TUNER_SUB_STEREO;
-
- v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, g_tuner, t);
-
- t->audmode = dev->amode;
-
- return 0;
-}
-
-static int vidioc_s_tuner(struct file *file, void *priv,
- const struct v4l2_tuner *t)
-{
- struct tm6000_fh *fh = priv;
- struct tm6000_core *dev = fh->dev;
-
- if (UNSET == dev->tuner_type)
- return -ENOTTY;
- if (0 != t->index)
- return -EINVAL;
-
- if (t->audmode > V4L2_TUNER_MODE_STEREO)
- dev->amode = V4L2_TUNER_MODE_STEREO;
- else
- dev->amode = t->audmode;
- dprintk(dev, 3, "audio mode: %x\n", t->audmode);
-
- v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_tuner, t);
-
- return 0;
-}
-
-static int vidioc_g_frequency(struct file *file, void *priv,
- struct v4l2_frequency *f)
-{
- struct tm6000_fh *fh = priv;
- struct tm6000_core *dev = fh->dev;
-
- if (UNSET == dev->tuner_type)
- return -ENOTTY;
- if (f->tuner)
- return -EINVAL;
-
- f->frequency = dev->freq;
-
- v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, g_frequency, f);
-
- return 0;
-}
-
-static int vidioc_s_frequency(struct file *file, void *priv,
- const struct v4l2_frequency *f)
-{
- struct tm6000_fh *fh = priv;
- struct tm6000_core *dev = fh->dev;
-
- if (UNSET == dev->tuner_type)
- return -ENOTTY;
- if (f->tuner != 0)
- return -EINVAL;
-
- dev->freq = f->frequency;
- v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, f);
-
- return 0;
-}
-
-static int radio_g_tuner(struct file *file, void *priv,
- struct v4l2_tuner *t)
-{
- struct tm6000_fh *fh = file->private_data;
- struct tm6000_core *dev = fh->dev;
-
- if (0 != t->index)
- return -EINVAL;
-
- memset(t, 0, sizeof(*t));
- strscpy(t->name, "Radio", sizeof(t->name));
- t->type = V4L2_TUNER_RADIO;
- t->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO;
- t->rxsubchans = V4L2_TUNER_SUB_STEREO;
- t->audmode = V4L2_TUNER_MODE_STEREO;
-
- v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, g_tuner, t);
-
- return 0;
-}
-
-static int radio_s_tuner(struct file *file, void *priv,
- const struct v4l2_tuner *t)
-{
- struct tm6000_fh *fh = file->private_data;
- struct tm6000_core *dev = fh->dev;
-
- if (0 != t->index)
- return -EINVAL;
- v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_tuner, t);
- return 0;
-}
-
-/* ------------------------------------------------------------------
- File operations for the device
- ------------------------------------------------------------------*/
-
-static int __tm6000_open(struct file *file)
-{
- struct video_device *vdev = video_devdata(file);
- struct tm6000_core *dev = video_drvdata(file);
- struct tm6000_fh *fh;
- enum v4l2_buf_type type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
- int rc;
- int radio = 0;
-
- dprintk(dev, V4L2_DEBUG_OPEN, "tm6000: open called (dev=%s)\n",
- video_device_node_name(vdev));
-
- switch (vdev->vfl_type) {
- case VFL_TYPE_VIDEO:
- type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
- break;
- case VFL_TYPE_VBI:
- type = V4L2_BUF_TYPE_VBI_CAPTURE;
- break;
- case VFL_TYPE_RADIO:
- radio = 1;
- break;
- default:
- return -EINVAL;
- }
-
- /* If more than one user, mutex should be added */
- dev->users++;
-
- dprintk(dev, V4L2_DEBUG_OPEN, "open dev=%s type=%s users=%d\n",
- video_device_node_name(vdev), v4l2_type_names[type],
- dev->users);
-
- /* allocate + initialize per filehandle data */
- fh = kzalloc(sizeof(*fh), GFP_KERNEL);
- if (NULL == fh) {
- dev->users--;
- return -ENOMEM;
- }
-
- v4l2_fh_init(&fh->fh, vdev);
- file->private_data = fh;
- fh->dev = dev;
- fh->radio = radio;
- dev->radio = radio;
- fh->type = type;
- dev->fourcc = format[0].fourcc;
-
- fh->fmt = format_by_fourcc(dev->fourcc);
-
- tm6000_get_std_res(dev);
-
- fh->width = dev->width;
- fh->height = dev->height;
-
- dprintk(dev, V4L2_DEBUG_OPEN, "Open: fh=%p, dev=%p, dev->vidq=%p\n",
- fh, dev, &dev->vidq);
- dprintk(dev, V4L2_DEBUG_OPEN, "Open: list_empty queued=%d\n",
- list_empty(&dev->vidq.queued));
- dprintk(dev, V4L2_DEBUG_OPEN, "Open: list_empty active=%d\n",
- list_empty(&dev->vidq.active));
-
- /* initialize hardware on analog mode */
- rc = tm6000_init_analog_mode(dev);
- if (rc < 0) {
- v4l2_fh_exit(&fh->fh);
- kfree(fh);
- return rc;
- }
-
- dev->mode = TM6000_MODE_ANALOG;
-
- if (!fh->radio) {
- videobuf_queue_vmalloc_init(&fh->vb_vidq, &tm6000_video_qops,
- NULL, &dev->slock,
- fh->type,
- V4L2_FIELD_INTERLACED,
- sizeof(struct tm6000_buffer), fh, &dev->lock);
- } else {
- dprintk(dev, V4L2_DEBUG_OPEN, "video_open: setting radio device\n");
- tm6000_set_audio_rinput(dev);
- v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_radio);
- tm6000_prepare_isoc(dev);
- tm6000_start_thread(dev);
- }
- v4l2_fh_add(&fh->fh);
-
- return 0;
-}
-
-static int tm6000_open(struct file *file)
-{
- struct video_device *vdev = video_devdata(file);
- int res;
-
- mutex_lock(vdev->lock);
- res = __tm6000_open(file);
- mutex_unlock(vdev->lock);
- return res;
-}
-
-static ssize_t
-tm6000_read(struct file *file, char __user *data, size_t count, loff_t *pos)
-{
- struct tm6000_fh *fh = file->private_data;
- struct tm6000_core *dev = fh->dev;
-
- if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
- int res;
-
- if (!res_get(fh->dev, fh, true))
- return -EBUSY;
-
- if (mutex_lock_interruptible(&dev->lock))
- return -ERESTARTSYS;
- res = videobuf_read_stream(&fh->vb_vidq, data, count, pos, 0,
- file->f_flags & O_NONBLOCK);
- mutex_unlock(&dev->lock);
- return res;
- }
- return 0;
-}
-
-static __poll_t
-__tm6000_poll(struct file *file, struct poll_table_struct *wait)
-{
- __poll_t req_events = poll_requested_events(wait);
- struct tm6000_fh *fh = file->private_data;
- struct tm6000_buffer *buf;
- __poll_t res = 0;
-
- if (v4l2_event_pending(&fh->fh))
- res = EPOLLPRI;
- else if (req_events & EPOLLPRI)
- poll_wait(file, &fh->fh.wait, wait);
- if (V4L2_BUF_TYPE_VIDEO_CAPTURE != fh->type)
- return res | EPOLLERR;
-
- if (!!is_res_streaming(fh->dev, fh))
- return res | EPOLLERR;
-
- if (!is_res_read(fh->dev, fh)) {
- /* streaming capture */
- if (list_empty(&fh->vb_vidq.stream))
- return res | EPOLLERR;
- buf = list_entry(fh->vb_vidq.stream.next, struct tm6000_buffer, vb.stream);
- poll_wait(file, &buf->vb.done, wait);
- if (buf->vb.state == VIDEOBUF_DONE ||
- buf->vb.state == VIDEOBUF_ERROR)
- return res | EPOLLIN | EPOLLRDNORM;
- } else if (req_events & (EPOLLIN | EPOLLRDNORM)) {
- /* read() capture */
- return res | videobuf_poll_stream(file, &fh->vb_vidq, wait);
- }
- return res;
-}
-
-static __poll_t tm6000_poll(struct file *file, struct poll_table_struct *wait)
-{
- struct tm6000_fh *fh = file->private_data;
- struct tm6000_core *dev = fh->dev;
- __poll_t res;
-
- mutex_lock(&dev->lock);
- res = __tm6000_poll(file, wait);
- mutex_unlock(&dev->lock);
- return res;
-}
-
-static int tm6000_release(struct file *file)
-{
- struct tm6000_fh *fh = file->private_data;
- struct tm6000_core *dev = fh->dev;
- struct video_device *vdev = video_devdata(file);
-
- dprintk(dev, V4L2_DEBUG_OPEN, "tm6000: close called (dev=%s, users=%d)\n",
- video_device_node_name(vdev), dev->users);
-
- mutex_lock(&dev->lock);
- dev->users--;
-
- res_free(dev, fh);
-
- if (!dev->users) {
- tm6000_uninit_isoc(dev);
-
- /* Stop interrupt USB pipe */
- tm6000_ir_int_stop(dev);
-
- usb_reset_configuration(dev->udev);
-
- if (dev->int_in.endp)
- usb_set_interface(dev->udev,
- dev->isoc_in.bInterfaceNumber, 2);
- else
- usb_set_interface(dev->udev,
- dev->isoc_in.bInterfaceNumber, 0);
-
- /* Start interrupt USB pipe */
- tm6000_ir_int_start(dev);
-
- if (!fh->radio)
- videobuf_mmap_free(&fh->vb_vidq);
- }
- v4l2_fh_del(&fh->fh);
- v4l2_fh_exit(&fh->fh);
- kfree(fh);
- mutex_unlock(&dev->lock);
-
- return 0;
-}
-
-static int tm6000_mmap(struct file *file, struct vm_area_struct * vma)
-{
- struct tm6000_fh *fh = file->private_data;
- struct tm6000_core *dev = fh->dev;
- int res;
-
- if (mutex_lock_interruptible(&dev->lock))
- return -ERESTARTSYS;
- res = videobuf_mmap_mapper(&fh->vb_vidq, vma);
- mutex_unlock(&dev->lock);
- return res;
-}
-
-static const struct v4l2_file_operations tm6000_fops = {
- .owner = THIS_MODULE,
- .open = tm6000_open,
- .release = tm6000_release,
- .unlocked_ioctl = video_ioctl2, /* V4L2 ioctl handler */
- .read = tm6000_read,
- .poll = tm6000_poll,
- .mmap = tm6000_mmap,
-};
-
-static const struct v4l2_ioctl_ops video_ioctl_ops = {
- .vidioc_querycap = vidioc_querycap,
- .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap,
- .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap,
- .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap,
- .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap,
- .vidioc_s_std = vidioc_s_std,
- .vidioc_g_std = vidioc_g_std,
- .vidioc_enum_input = vidioc_enum_input,
- .vidioc_g_input = vidioc_g_input,
- .vidioc_s_input = vidioc_s_input,
- .vidioc_g_tuner = vidioc_g_tuner,
- .vidioc_s_tuner = vidioc_s_tuner,
- .vidioc_g_frequency = vidioc_g_frequency,
- .vidioc_s_frequency = vidioc_s_frequency,
- .vidioc_streamon = vidioc_streamon,
- .vidioc_streamoff = vidioc_streamoff,
- .vidioc_reqbufs = vidioc_reqbufs,
- .vidioc_querybuf = vidioc_querybuf,
- .vidioc_qbuf = vidioc_qbuf,
- .vidioc_dqbuf = vidioc_dqbuf,
- .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
- .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
-};
-
-static struct video_device tm6000_template = {
- .name = "tm6000",
- .fops = &tm6000_fops,
- .ioctl_ops = &video_ioctl_ops,
- .release = video_device_release_empty,
- .tvnorms = TM6000_STD,
-};
-
-static const struct v4l2_file_operations radio_fops = {
- .owner = THIS_MODULE,
- .open = tm6000_open,
- .poll = v4l2_ctrl_poll,
- .release = tm6000_release,
- .unlocked_ioctl = video_ioctl2,
-};
-
-static const struct v4l2_ioctl_ops radio_ioctl_ops = {
- .vidioc_querycap = vidioc_querycap,
- .vidioc_g_tuner = radio_g_tuner,
- .vidioc_s_tuner = radio_s_tuner,
- .vidioc_g_frequency = vidioc_g_frequency,
- .vidioc_s_frequency = vidioc_s_frequency,
- .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
- .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
-};
-
-static struct video_device tm6000_radio_template = {
- .name = "tm6000",
- .fops = &radio_fops,
- .ioctl_ops = &radio_ioctl_ops,
-};
-
-/* -----------------------------------------------------------------
- * Initialization and module stuff
- * ------------------------------------------------------------------
- */
-
-static void vdev_init(struct tm6000_core *dev,
- struct video_device *vfd,
- const struct video_device
- *template, const char *type_name)
-{
- *vfd = *template;
- vfd->v4l2_dev = &dev->v4l2_dev;
- vfd->release = video_device_release_empty;
- vfd->lock = &dev->lock;
-
- snprintf(vfd->name, sizeof(vfd->name), "%s %s", dev->name, type_name);
-
- video_set_drvdata(vfd, dev);
-}
-
-int tm6000_v4l2_register(struct tm6000_core *dev)
-{
- int ret = 0;
-
- v4l2_ctrl_handler_init(&dev->ctrl_handler, 6);
- v4l2_ctrl_handler_init(&dev->radio_ctrl_handler, 2);
- v4l2_ctrl_new_std(&dev->radio_ctrl_handler, &tm6000_radio_ctrl_ops,
- V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
- v4l2_ctrl_new_std(&dev->radio_ctrl_handler, &tm6000_radio_ctrl_ops,
- V4L2_CID_AUDIO_VOLUME, -15, 15, 1, 0);
- v4l2_ctrl_new_std(&dev->ctrl_handler, &tm6000_ctrl_ops,
- V4L2_CID_BRIGHTNESS, 0, 255, 1, 54);
- v4l2_ctrl_new_std(&dev->ctrl_handler, &tm6000_ctrl_ops,
- V4L2_CID_CONTRAST, 0, 255, 1, 119);
- v4l2_ctrl_new_std(&dev->ctrl_handler, &tm6000_ctrl_ops,
- V4L2_CID_SATURATION, 0, 255, 1, 112);
- v4l2_ctrl_new_std(&dev->ctrl_handler, &tm6000_ctrl_ops,
- V4L2_CID_HUE, -128, 127, 1, 0);
- v4l2_ctrl_add_handler(&dev->ctrl_handler,
- &dev->radio_ctrl_handler, NULL, false);
-
- if (dev->radio_ctrl_handler.error)
- ret = dev->radio_ctrl_handler.error;
- if (!ret && dev->ctrl_handler.error)
- ret = dev->ctrl_handler.error;
- if (ret)
- goto free_ctrl;
-
- vdev_init(dev, &dev->vfd, &tm6000_template, "video");
-
- dev->vfd.ctrl_handler = &dev->ctrl_handler;
- dev->vfd.device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
- V4L2_CAP_READWRITE;
- if (dev->tuner_type != TUNER_ABSENT)
- dev->vfd.device_caps |= V4L2_CAP_TUNER;
-
- /* init video dma queues */
- INIT_LIST_HEAD(&dev->vidq.active);
- INIT_LIST_HEAD(&dev->vidq.queued);
-
- ret = video_register_device(&dev->vfd, VFL_TYPE_VIDEO, video_nr);
-
- if (ret < 0) {
- printk(KERN_INFO "%s: can't register video device\n",
- dev->name);
- goto free_ctrl;
- }
-
- printk(KERN_INFO "%s: registered device %s\n",
- dev->name, video_device_node_name(&dev->vfd));
-
- if (dev->caps.has_radio) {
- vdev_init(dev, &dev->radio_dev, &tm6000_radio_template,
- "radio");
- dev->radio_dev.ctrl_handler = &dev->radio_ctrl_handler;
- dev->radio_dev.device_caps = V4L2_CAP_RADIO | V4L2_CAP_TUNER;
- ret = video_register_device(&dev->radio_dev, VFL_TYPE_RADIO,
- radio_nr);
- if (ret < 0) {
- printk(KERN_INFO "%s: can't register radio device\n",
- dev->name);
- goto unreg_video;
- }
-
- printk(KERN_INFO "%s: registered device %s\n",
- dev->name, video_device_node_name(&dev->radio_dev));
- }
-
- printk(KERN_INFO "Trident TVMaster TM5600/TM6000/TM6010 USB2 board (Load status: %d)\n", ret);
- return ret;
-
-unreg_video:
- video_unregister_device(&dev->vfd);
-free_ctrl:
- v4l2_ctrl_handler_free(&dev->ctrl_handler);
- v4l2_ctrl_handler_free(&dev->radio_ctrl_handler);
- return ret;
-}
-
-int tm6000_v4l2_unregister(struct tm6000_core *dev)
-{
- video_unregister_device(&dev->vfd);
-
- /* if URB buffers are still allocated free them now */
- tm6000_free_urb_buffers(dev);
-
- video_unregister_device(&dev->radio_dev);
- return 0;
-}
-
-int tm6000_v4l2_exit(void)
-{
- return 0;
-}
-
-module_param(video_nr, int, 0);
-MODULE_PARM_DESC(video_nr, "Allow changing video device number");
-
-module_param_named(debug, tm6000_debug, int, 0444);
-MODULE_PARM_DESC(debug, "activates debug info");
-
-module_param(vid_limit, int, 0644);
-MODULE_PARM_DESC(vid_limit, "capture memory limit in megabytes");
-
-module_param(keep_urb, bool, 0);
-MODULE_PARM_DESC(keep_urb, "Keep urb buffers allocated even when the device is closed by the user");
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * tm6000.h - driver for TM5600/TM6000/TM6010 USB video capture devices
- *
- * Copyright (c) 2006-2007 Mauro Carvalho Chehab <mchehab@kernel.org>
- *
- * Copyright (c) 2007 Michel Ludwig <michel.ludwig@gmail.com>
- * - DVB-T support
- */
-
-#include <linux/videodev2.h>
-#include <media/v4l2-common.h>
-#include <media/videobuf-vmalloc.h>
-#include "tm6000-usb-isoc.h"
-#include <linux/i2c.h>
-#include <linux/mutex.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-ctrls.h>
-#include <media/v4l2-fh.h>
-
-#include <linux/dvb/frontend.h>
-#include <media/dvb_demux.h>
-#include <media/dvb_frontend.h>
-#include <media/dmxdev.h>
-
-/* Inputs */
-enum tm6000_itype {
- TM6000_INPUT_TV = 1,
- TM6000_INPUT_COMPOSITE1,
- TM6000_INPUT_COMPOSITE2,
- TM6000_INPUT_SVIDEO,
- TM6000_INPUT_DVB,
- TM6000_INPUT_RADIO,
-};
-
-enum tm6000_mux {
- TM6000_VMUX_VIDEO_A = 1,
- TM6000_VMUX_VIDEO_B,
- TM6000_VMUX_VIDEO_AB,
- TM6000_AMUX_ADC1,
- TM6000_AMUX_ADC2,
- TM6000_AMUX_SIF1,
- TM6000_AMUX_SIF2,
- TM6000_AMUX_I2S,
-};
-
-enum tm6000_devtype {
- TM6000 = 0,
- TM5600,
- TM6010,
-};
-
-struct tm6000_input {
- enum tm6000_itype type;
- enum tm6000_mux vmux;
- enum tm6000_mux amux;
- unsigned int v_gpio;
- unsigned int a_gpio;
-};
-
-/* ------------------------------------------------------------------
- * Basic structures
- * ------------------------------------------------------------------
- */
-
-struct tm6000_fmt {
- u32 fourcc; /* v4l2 format id */
- int depth;
-};
-
-/* buffer for one video frame */
-struct tm6000_buffer {
- /* common v4l buffer stuff -- must be first */
- struct videobuf_buffer vb;
-
- struct tm6000_fmt *fmt;
-};
-
-struct tm6000_dmaqueue {
- struct list_head active;
- struct list_head queued;
-
- /* thread for generating video stream*/
- struct task_struct *kthread;
- wait_queue_head_t wq;
- /* Counters to control fps rate */
- int frame;
- int ini_jiffies;
-};
-
-/* device states */
-enum tm6000_core_state {
- DEV_INITIALIZED = 0x01,
- DEV_DISCONNECTED = 0x02,
- DEV_MISCONFIGURED = 0x04,
-};
-
-/* io methods */
-enum tm6000_io_method {
- IO_NONE,
- IO_READ,
- IO_MMAP,
-};
-
-enum tm6000_mode {
- TM6000_MODE_UNKNOWN = 0,
- TM6000_MODE_ANALOG,
- TM6000_MODE_DIGITAL,
-};
-
-struct tm6000_gpio {
- int tuner_reset;
- int tuner_on;
- int demod_reset;
- int demod_on;
- int power_led;
- int dvb_led;
- int ir;
-};
-
-struct tm6000_capabilities {
- unsigned int has_tuner:1;
- unsigned int has_tda9874:1;
- unsigned int has_dvb:1;
- unsigned int has_zl10353:1;
- unsigned int has_eeprom:1;
- unsigned int has_remote:1;
- unsigned int has_radio:1;
-};
-
-struct tm6000_dvb {
- struct dvb_adapter adapter;
- struct dvb_demux demux;
- struct dvb_frontend *frontend;
- struct dmxdev dmxdev;
- unsigned int streams;
- struct urb *bulk_urb;
- struct mutex mutex;
-};
-
-struct snd_tm6000_card {
- struct snd_card *card;
- spinlock_t reg_lock;
- struct tm6000_core *core;
- struct snd_pcm_substream *substream;
-
- /* temporary data for buffer fill processing */
- unsigned buf_pos;
- unsigned period_pos;
-};
-
-struct tm6000_endpoint {
- struct usb_host_endpoint *endp;
- __u8 bInterfaceNumber;
- __u8 bAlternateSetting;
- unsigned maxsize;
-};
-
-#define TM6000_QUIRK_NO_USB_DELAY (1 << 0)
-
-struct tm6000_core {
- /* generic device properties */
- char name[30]; /* name (including minor) of the device */
- int model; /* index in the device_data struct */
- int devno; /* marks the number of this device */
- enum tm6000_devtype dev_type; /* type of device */
- unsigned char eedata[256]; /* Eeprom data */
- unsigned eedata_size; /* Size of the eeprom info */
-
- v4l2_std_id norm; /* Current norm */
- int width, height; /* Selected resolution */
-
- enum tm6000_core_state state;
-
- /* Device Capabilities*/
- struct tm6000_capabilities caps;
-
- /* Used to load alsa/dvb */
- struct work_struct request_module_wk;
-
- /* Tuner configuration */
- int tuner_type; /* type of the tuner */
- int tuner_addr; /* tuner address */
-
- struct tm6000_gpio gpio;
-
- char *ir_codes;
-
- __u8 radio;
-
- /* Demodulator configuration */
- int demod_addr; /* demodulator address */
-
- int audio_bitrate;
- /* i2c i/o */
- struct i2c_adapter i2c_adap;
- struct i2c_client i2c_client;
-
-
- /* extension */
- struct list_head devlist;
-
- /* video for linux */
- int users;
-
- /* various device info */
- struct tm6000_fh *resources; /* Points to fh that is streaming */
- bool is_res_read;
-
- struct video_device vfd;
- struct video_device radio_dev;
- struct tm6000_dmaqueue vidq;
- struct v4l2_device v4l2_dev;
- struct v4l2_ctrl_handler ctrl_handler;
- struct v4l2_ctrl_handler radio_ctrl_handler;
-
- int input;
- struct tm6000_input vinput[3]; /* video input */
- struct tm6000_input rinput; /* radio input */
-
- int freq;
- unsigned int fourcc;
-
- enum tm6000_mode mode;
-
- int ctl_mute; /* audio */
- int ctl_volume;
- int amode;
-
- /* DVB-T support */
- struct tm6000_dvb *dvb;
-
- /* audio support */
- struct snd_tm6000_card *adev;
- struct work_struct wq_trigger; /* Trigger to start/stop audio for alsa module */
- atomic_t stream_started; /* stream should be running if true */
-
- struct tm6000_IR *ir;
-
- /* locks */
- struct mutex lock;
- struct mutex usb_lock;
-
- /* usb transfer */
- struct usb_device *udev; /* the usb device */
-
- struct tm6000_endpoint bulk_in, bulk_out, isoc_in, isoc_out;
- struct tm6000_endpoint int_in, int_out;
-
- /* scaler!=0 if scaler is active*/
- int scaler;
-
- /* Isoc control struct */
- struct usb_isoc_ctl isoc_ctl;
-
- spinlock_t slock;
-
- /* urb dma buffers */
- char **urb_buffer;
- dma_addr_t *urb_dma;
- unsigned int urb_size;
-
- unsigned long quirks;
-};
-
-enum tm6000_ops_type {
- TM6000_AUDIO = 0x10,
- TM6000_DVB = 0x20,
-};
-
-struct tm6000_ops {
- struct list_head next;
- char *name;
- enum tm6000_ops_type type;
- int (*init)(struct tm6000_core *);
- int (*fini)(struct tm6000_core *);
- int (*fillbuf)(struct tm6000_core *, char *buf, int size);
-};
-
-struct tm6000_fh {
- struct v4l2_fh fh;
- struct tm6000_core *dev;
- unsigned int radio;
-
- /* video capture */
- struct tm6000_fmt *fmt;
- unsigned int width, height;
- struct videobuf_queue vb_vidq;
-
- enum v4l2_buf_type type;
-};
-
-#define TM6000_STD (V4L2_STD_PAL|V4L2_STD_PAL_N|V4L2_STD_PAL_Nc| \
- V4L2_STD_PAL_M|V4L2_STD_PAL_60|V4L2_STD_NTSC_M| \
- V4L2_STD_NTSC_M_JP|V4L2_STD_SECAM)
-
-/* In tm6000-cards.c */
-
-int tm6000_tuner_callback(void *ptr, int component, int command, int arg);
-int tm6000_xc5000_callback(void *ptr, int component, int command, int arg);
-int tm6000_cards_setup(struct tm6000_core *dev);
-void tm6000_flash_led(struct tm6000_core *dev, u8 state);
-
-/* In tm6000-core.c */
-
-int tm6000_read_write_usb(struct tm6000_core *dev, u8 reqtype, u8 req,
- u16 value, u16 index, u8 *buf, u16 len);
-int tm6000_get_reg(struct tm6000_core *dev, u8 req, u16 value, u16 index);
-int tm6000_get_reg16(struct tm6000_core *dev, u8 req, u16 value, u16 index);
-int tm6000_get_reg32(struct tm6000_core *dev, u8 req, u16 value, u16 index);
-int tm6000_set_reg(struct tm6000_core *dev, u8 req, u16 value, u16 index);
-int tm6000_set_reg_mask(struct tm6000_core *dev, u8 req, u16 value,
- u16 index, u16 mask);
-int tm6000_i2c_reset(struct tm6000_core *dev, u16 tsleep);
-int tm6000_init(struct tm6000_core *dev);
-int tm6000_reset(struct tm6000_core *dev);
-
-int tm6000_init_analog_mode(struct tm6000_core *dev);
-int tm6000_init_digital_mode(struct tm6000_core *dev);
-int tm6000_set_audio_bitrate(struct tm6000_core *dev, int bitrate);
-int tm6000_set_audio_rinput(struct tm6000_core *dev);
-int tm6000_tvaudio_set_mute(struct tm6000_core *dev, u8 mute);
-void tm6000_set_volume(struct tm6000_core *dev, int vol);
-
-int tm6000_v4l2_register(struct tm6000_core *dev);
-int tm6000_v4l2_unregister(struct tm6000_core *dev);
-int tm6000_v4l2_exit(void);
-void tm6000_set_fourcc_format(struct tm6000_core *dev);
-
-void tm6000_remove_from_devlist(struct tm6000_core *dev);
-void tm6000_add_into_devlist(struct tm6000_core *dev);
-int tm6000_register_extension(struct tm6000_ops *ops);
-void tm6000_unregister_extension(struct tm6000_ops *ops);
-void tm6000_init_extension(struct tm6000_core *dev);
-void tm6000_close_extension(struct tm6000_core *dev);
-int tm6000_call_fillbuf(struct tm6000_core *dev, enum tm6000_ops_type type,
- char *buf, int size);
-
-
-/* In tm6000-stds.c */
-void tm6000_get_std_res(struct tm6000_core *dev);
-int tm6000_set_standard(struct tm6000_core *dev);
-
-/* In tm6000-i2c.c */
-int tm6000_i2c_register(struct tm6000_core *dev);
-int tm6000_i2c_unregister(struct tm6000_core *dev);
-
-/* In tm6000-queue.c */
-
-int tm6000_v4l2_mmap(struct file *filp, struct vm_area_struct *vma);
-
-int tm6000_vidioc_streamon(struct file *file, void *priv,
- enum v4l2_buf_type i);
-int tm6000_vidioc_streamoff(struct file *file, void *priv,
- enum v4l2_buf_type i);
-int tm6000_vidioc_reqbufs(struct file *file, void *priv,
- struct v4l2_requestbuffers *rb);
-int tm6000_vidioc_querybuf(struct file *file, void *priv,
- struct v4l2_buffer *b);
-int tm6000_vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *b);
-int tm6000_vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b);
-ssize_t tm6000_v4l2_read(struct file *filp, char __user * buf, size_t count,
- loff_t *f_pos);
-unsigned int tm6000_v4l2_poll(struct file *file,
- struct poll_table_struct *wait);
-int tm6000_queue_init(struct tm6000_core *dev);
-
-/* In tm6000-alsa.c */
-/*int tm6000_audio_init(struct tm6000_core *dev, int idx);*/
-
-/* In tm6000-input.c */
-int tm6000_ir_init(struct tm6000_core *dev);
-int tm6000_ir_fini(struct tm6000_core *dev);
-void tm6000_ir_wait(struct tm6000_core *dev, u8 state);
-int tm6000_ir_int_start(struct tm6000_core *dev);
-void tm6000_ir_int_stop(struct tm6000_core *dev);
-
-/* Debug stuff */
-
-extern int tm6000_debug;
-
-#define dprintk(dev, level, fmt, arg...) do {\
- if (tm6000_debug & level) \
- printk(KERN_INFO "(%lu) %s %s :"fmt, jiffies, \
- dev->name, __func__ , ##arg); } while (0)
-
-#define V4L2_DEBUG_REG 0x0004
-#define V4L2_DEBUG_I2C 0x0008
-#define V4L2_DEBUG_QUEUE 0x0010
-#define V4L2_DEBUG_ISOC 0x0020
-#define V4L2_DEBUG_RES_LOCK 0x0040 /* Resource locking */
-#define V4L2_DEBUG_OPEN 0x0080 /* video open/close debug */
-
-#define tm6000_err(fmt, arg...) do {\
- printk(KERN_ERR "tm6000 %s :"fmt, \
- __func__ , ##arg); } while (0)
projects / linux.git / commitdiff