ACPI: scan: Defer enumeration of devices with _DEP lists

In some cases ACPI control methods used during device enumeration
(such as _HID or _STA) may rely on Operation Region handlers
supplied by the drivers of other devices [1]:

 An example of this is the Acer Switch 10E SW3-016 model. The _HID
 method of the ACPI node for the UART attached Bluetooth, reads
 GPIOs to detect the installed wifi chip and update the _HID for the
 Bluetooth's ACPI node accordingly. The current ACPI scan code calls
 _HID before the GPIO controller's OpRegions are available, leading
 to the wrong _HID being used and Bluetooth not working.

In principle, in those cases there should be a _DEP control method
under the device object with OpRegion enumeration dependencies, so
deferring the enumeration of devices with _DEP returning a non-empty
list of suppliers of OpRegions depended on by the given device
(modulo some known exceptions that don't really supply any OpRegions
and are listed by _DEP for other reasons irrelevant for Linux) should
at least address the first-order dependencies by allowing the OpRegion
suppliers to be enumerated before their consumers.

Implement the above idea by modifying acpi_bus_scan() to enumerate
devices in the given scope of the ACPI namespace in two passes,
where the first pass covers the devices without "significant" lists
of dependencies coming from _DEP only and the second pass covers
all of the devices that were not enumerated in the first pass.

Take _DEP into account only for device objects with _HID, mostly in
order to avoid deferring the creation of ACPI device objects that
represent PCI devices and must be present during the enumeration
of the PCI bus (which takes place during the processing of the ACPI
device object that represents the host bridge), so that they can
be properly associated with the corresponding PCI devices.

Link: https://lore.kernel.org/linux-acpi/20201121203040.146252-1-hdegoede@redhat.com/
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>

diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index e861e1af355c969d1782fb9d863d0d520fbd9126..00f1b09f15a4ac4ec00fbaa523814fdc2fb8d6ec 100644 (file)
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -1635,8 +1635,6 @@ void acpi_init_device_object(struct acpi_device *device, acpi_handle handle,
        device_initialize(&device->dev);
        dev_set_uevent_suppress(&device->dev, true);
        acpi_init_coherency(device);
-       /* Assume there are unmet deps until acpi_device_dep_initialize() runs */
-       device->dep_unmet = 1;
 }
 
 void acpi_device_add_finalize(struct acpi_device *device)
@@ -1849,7 +1847,13 @@ static u32 acpi_scan_check_dep(acpi_handle handle)
        u32 count;
        int i;
 
-       if (!acpi_has_method(handle, "_DEP"))
+       /*
+        * Check for _HID here to avoid deferring the enumeration of:
+        * 1. PCI devices.
+        * 2. ACPI nodes describing USB ports.
+        * Still, checking for _HID catches more then just these cases ...
+        */
+       if (!acpi_has_method(handle, "_DEP") || !acpi_has_method(handle, "_HID"))
                return 0;
 
        status = acpi_evaluate_reference(handle, "_DEP", NULL, &dep_devices);
@@ -1892,11 +1896,24 @@ static u32 acpi_scan_check_dep(acpi_handle handle)
        return count;
 }
 
-static acpi_status acpi_bus_check_add(acpi_handle handle, u32 lvl_not_used,
-                                     void *not_used, void **return_value)
+static void acpi_scan_dep_init(struct acpi_device *adev)
+{
+       struct acpi_dep_data *dep;
+
+       mutex_lock(&acpi_dep_list_lock);
+
+       list_for_each_entry(dep, &acpi_dep_list, node) {
+               if (dep->consumer == adev->handle)
+                       adev->dep_unmet++;
+       }
+
+       mutex_unlock(&acpi_dep_list_lock);
+}
+
+static acpi_status acpi_bus_check_add(acpi_handle handle, bool check_dep,
+                                     struct acpi_device **adev_p)
 {
        struct acpi_device *device = NULL;
-       u32 dep_count = 0;
        unsigned long long sta;
        int type;
        int result;
@@ -1914,24 +1931,40 @@ static acpi_status acpi_bus_check_add(acpi_handle handle, u32 lvl_not_used,
                return AE_OK;
        }
 
-       if (type == ACPI_BUS_TYPE_DEVICE)
-               dep_count = acpi_scan_check_dep(handle);
+       if (type == ACPI_BUS_TYPE_DEVICE && check_dep) {
+               u32 count = acpi_scan_check_dep(handle);
+               /* Bail out if the number of recorded dependencies is not 0. */
+               if (count > 0)
+                       return AE_CTRL_DEPTH;
+       }
 
        acpi_add_single_object(&device, handle, type, sta);
        if (!device)
                return AE_CTRL_DEPTH;
 
-       device->dep_unmet = dep_count;
-
        acpi_scan_init_hotplug(device);
+       if (!check_dep)
+               acpi_scan_dep_init(device);
 
- out:
-       if (!*return_value)
-               *return_value = device;
+out:
+       if (!*adev_p)
+               *adev_p = device;
 
        return AE_OK;
 }
 
+static acpi_status acpi_bus_check_add_1(acpi_handle handle, u32 lvl_not_used,
+                                       void *not_used, void **ret_p)
+{
+       return acpi_bus_check_add(handle, true, (struct acpi_device **)ret_p);
+}
+
+static acpi_status acpi_bus_check_add_2(acpi_handle handle, u32 lvl_not_used,
+                                       void *not_used, void **ret_p)
+{
+       return acpi_bus_check_add(handle, false, (struct acpi_device **)ret_p);
+}
+
 static void acpi_default_enumeration(struct acpi_device *device)
 {
        /*
@@ -1999,12 +2032,16 @@ static int acpi_scan_attach_handler(struct acpi_device *device)
        return ret;
 }
 
-static void acpi_bus_attach(struct acpi_device *device)
+static void acpi_bus_attach(struct acpi_device *device, bool first_pass)
 {
        struct acpi_device *child;
+       bool skip = !first_pass && device->flags.visited;
        acpi_handle ejd;
        int ret;
 
+       if (skip)
+               goto ok;
+
        if (ACPI_SUCCESS(acpi_bus_get_ejd(device->handle, &ejd)))
                register_dock_dependent_device(device, ejd);
 
@@ -2051,9 +2088,9 @@ static void acpi_bus_attach(struct acpi_device *device)
 
  ok:
        list_for_each_entry(child, &device->children, node)
-               acpi_bus_attach(child);
+               acpi_bus_attach(child, first_pass);
 
-       if (device->handler && device->handler->hotplug.notify_online)
+       if (!skip && device->handler && device->handler->hotplug.notify_online)
                device->handler->hotplug.notify_online(device);
 }
 
@@ -2071,7 +2108,8 @@ void acpi_walk_dep_device_list(acpi_handle handle)
 
                        adev->dep_unmet--;
                        if (!adev->dep_unmet)
-                               acpi_bus_attach(adev);
+                               acpi_bus_attach(adev, true);
+
                        list_del(&dep->node);
                        kfree(dep);
                }
@@ -2096,17 +2134,32 @@ EXPORT_SYMBOL_GPL(acpi_walk_dep_device_list);
  */
 int acpi_bus_scan(acpi_handle handle)
 {
-       void *device = NULL;
+       struct acpi_device *device = NULL;
+
+       /* Pass 1: Avoid enumerating devices with missing dependencies. */
 
-       if (ACPI_SUCCESS(acpi_bus_check_add(handle, 0, NULL, &device)))
+       if (ACPI_SUCCESS(acpi_bus_check_add(handle, true, &device)))
                acpi_walk_namespace(ACPI_TYPE_ANY, handle, ACPI_UINT32_MAX,
-                                   acpi_bus_check_add, NULL, NULL, &device);
+                                   acpi_bus_check_add_1, NULL, NULL,
+                                   (void **)&device);
 
-       if (device) {
-               acpi_bus_attach(device);
-               return 0;
-       }
-       return -ENODEV;
+       if (!device)
+               return -ENODEV;
+
+       acpi_bus_attach(device, true);
+
+       /* Pass 2: Enumerate all of the remaining devices. */
+
+       device = NULL;
+
+       if (ACPI_SUCCESS(acpi_bus_check_add(handle, false, &device)))
+               acpi_walk_namespace(ACPI_TYPE_ANY, handle, ACPI_UINT32_MAX,
+                                   acpi_bus_check_add_2, NULL, NULL,
+                                   (void **)&device);
+
+       acpi_bus_attach(device, false);
+
+       return 0;
 }
 EXPORT_SYMBOL(acpi_bus_scan);