arm64: dts: qcom: Add Asus NovaGo TP370QL

This adds the initial DT for the Asus NovaGo TP370QL laptop.  Supported
functionality includes USB (host), microSD-card, keyboard, and trackpad.

Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 28695e7c0cc3d966de7de77f24d4841513b82d98..954d75de617ba45374f1c006f5a300e3c9ef93e4 100644 (file)
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += msm8992-bullhead-rev-101.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += msm8994-angler-rev-101.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += msm8996-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)        += msm8998-asus-novago-tp370ql.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += msm8998-hp-envy-x2.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += msm8998-lenovo-miix-630.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += msm8998-mtp.dtb

diff --git a/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts b/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts
new file mode 100644 (file)
index 0000000..db5821b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */
+
+/dts-v1/;
+
+#include "msm8998-clamshell.dtsi"
+
+/ {
+       model = "Asus NovaGo TP370QL";
+       compatible = "asus,novago-tp370ql", "qcom,msm8998";
+};
+
+&blsp1_i2c6 {
+       status = "okay";
+
+       touchpad@15 {
+               compatible = "hid-over-i2c";
+               interrupt-parent = <&tlmm>;
+               interrupts = <0x7b IRQ_TYPE_LEVEL_LOW>;
+               reg = <0x15>;
+               hid-descr-addr = <0x0001>;
+
+               pinctrl-names = "default";
+               pinctrl-0 = <&touchpad>;
+       };
+
+       keyboard@3a {
+               compatible = "hid-over-i2c";
+               interrupt-parent = <&tlmm>;
+               interrupts = <0x25 IRQ_TYPE_LEVEL_LOW>;
+               reg = <0x3a>;
+               hid-descr-addr = <0x0001>;
+       };
+};
+
+&sdhc2 {
+       cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
+};
+
+&tlmm {
+       touchpad: touchpad {
+               config {
+                       pins = "gpio123";
+                       bias-pull-up;
+               };
+       };
+};