mtd: cfi_cmdset_0002: only check errors when ready in cfi_check_err_status()

Cypress S26K{L|S}P{128|256|512}S datasheet says that the error bits in
the status register are only valid when the "device ready" bit 7 is set.
Add the check for the device ready bit in cfi_check_err_status() as that
function isn't always called with this bit set.

Fixes: 4844ef80305d ("mtd: cfi_cmdset_0002: Add support for polling status register")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index 5b2a25b49333eadc424f9d41959a7d599936f22b..d5c2e5430241c57c18e7a31db5f42976312a4587 100644 (file)
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -136,6 +136,10 @@ static void cfi_check_err_status(struct map_info *map, struct flchip *chip,
                         cfi->device_type, NULL);
        status = map_read(map, adr);
 
+       /* The error bits are invalid while the chip's busy */
+       if (!map_word_bitsset(map, status, CMD(CFI_SR_DRB)))
+               return;
+
        if (map_word_bitsset(map, status, CMD(0x3a))) {
                unsigned long chipstatus = MERGESTATUS(status);