i2c: i801: Remove usage of I2C_CLASS_SPD
authorHeiner Kallweit <hkallweit1@gmail.com>
Mon, 15 Apr 2024 20:47:55 +0000 (22:47 +0200)
committerAndi Shyti <andi.shyti@kernel.org>
Sun, 5 May 2024 22:56:13 +0000 (00:56 +0200)
Only remaining client driver supporting I2C_CLASS_SPD is jc42. This
type of thermal sensor can be found on several DDR3/DDR4 modules.
i2c_register_spd() instantiates also such thermal sensor i2c devices.
Since 893fef0bc6aa ("i2c: i801: Call i2c_register_spd for muxed child
segments") i2c_register_spd() is called also for the remaining use case,
systems with muxed SMBUS segments for SPD EEPROMs.
Therefore I2C_CLASS_SPD class-based instantiation isn't needed any longer
in this driver, so remove it.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
drivers/i2c/busses/i2c-i801.c

index 92b53b480c47f96fc3b18b6ddc74df48528bceda..6d027a77d1dd70f8ffb0cec701d9c722bd0dbc61 100644 (file)
@@ -264,7 +264,6 @@ struct i801_mux_config {
        char *gpio_chip;
        unsigned values[3];
        int n_values;
-       unsigned classes[3];
        unsigned gpios[2];              /* Relative to gpio_chip->base */
        int n_gpios;
 };
@@ -1315,7 +1314,6 @@ static struct i801_mux_config i801_mux_config_asus_z8_d12 = {
        .gpio_chip = "gpio_ich",
        .values = { 0x02, 0x03 },
        .n_values = 2,
-       .classes = { I2C_CLASS_SPD, I2C_CLASS_SPD },
        .gpios = { 52, 53 },
        .n_gpios = 2,
 };
@@ -1324,7 +1322,6 @@ static struct i801_mux_config i801_mux_config_asus_z8_d18 = {
        .gpio_chip = "gpio_ich",
        .values = { 0x02, 0x03, 0x01 },
        .n_values = 3,
-       .classes = { I2C_CLASS_SPD, I2C_CLASS_SPD, I2C_CLASS_SPD },
        .gpios = { 52, 53 },
        .n_gpios = 2,
 };
@@ -1434,7 +1431,6 @@ static void i801_add_mux(struct i801_priv *priv)
        gpio_data.parent = priv->adapter.nr;
        gpio_data.values = mux_config->values;
        gpio_data.n_values = mux_config->n_values;
-       gpio_data.classes = mux_config->classes;
        gpio_data.idle = I2C_MUX_GPIO_NO_IDLE;
 
        /* Register GPIO descriptor lookup table */