arm64: dts: ti: k3-j721e-sk: fix PMIC interrupt number

The tps659413 and tps659411 nodes set WKUP_GPIO0_7 (G28) pin as input
to be used as PMIC interrupt but uses 9 (WKUP_GPIO0_9) as
"interrupts" property.

Replace 9 by 7 for both tps659413 and tps659411 after checking in the
board schematic [1].

[1] https://www.ti.com/tool/SK-TDA4VM

Fixes: b808cef0be46 ("arm64: dts: ti: k3-j721e-sk: Add TPS6594 family PMICs")
Cc: Neha Malcom Francis <n-francis@ti.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Link: https://lore.kernel.org/r/20240209171146.307465-2-romain.naour@smile.fr
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index 6950b1ff124f3cea27784404502e84243b9a5be7..1da06e0479f2cba089fcc4ec051e37297fb59b6c 100644 (file)
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -574,7 +574,7 @@
                pinctrl-names = "default";
                pinctrl-0 = <&pmic_irq_pins_default>;
                interrupt-parent = <&wkup_gpio0>;
-               interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+               interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
                gpio-controller;
                #gpio-cells = <2>;
                ti,primary-pmic;
@@ -651,7 +651,7 @@
                reg = <0x4c>;
                system-power-controller;
                interrupt-parent = <&wkup_gpio0>;
-               interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+               interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
                gpio-controller;
                #gpio-cells = <2>;
                buck1234-supply = <&vsys_3v3>;