Merge tag 'arm-soc/for-5.19/devicetree' of https://github.com/Broadcom/stblinux into...
authorArnd Bergmann <arnd@arndb.de>
Thu, 5 May 2022 14:48:55 +0000 (16:48 +0200)
committerArnd Bergmann <arnd@arndb.de>
Thu, 5 May 2022 14:48:55 +0000 (16:48 +0200)
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.19, please pull the following:

- Oleksij fixes the ethernet node name for the USB Ethernet adapter on
  BCM283x (Raspberry Pi 1/2/3) platforms

- Kuldeep fixes the PL022 SPI controller clock names to conform to the
  binding

- Rafal updates the various BCM5301X (Northstar) Device Tree include
  files to be dtsschema conforming for pinctrl, NAND

- Arinc adds the Asus RT-AC88U binding, removes some unnecessary
  properties of the Ethernet switch DT node, populates the correct PHY
  interface for port 5 of the switch, adds support for fetching the MAC
  address from the NVMEM provider and finally disables gmac0 on that
  device which is unused

- Phil updates the Raspberry Pi 1/2/3 DTS files to have the latest gpio
  line names conforming to the printed circuit board layout

- Krzysztof updates various Broadcom DTS files to have a conforming SPI
  nor Device Tree node

- Takayoshi adds support for the Buffalo WZR-1166DHP/WZR-1166DHP2
  wireless routers based on the BCM4708 SoC

- William adds support for the BCM47622 ARMv7 Broadband SoC and provides
  a basic DTS to boot upstream Linux on such a system

* tag 'arm-soc/for-5.19/devicetree' of https://github.com/Broadcom/stblinux: (22 commits)
  ARM: dts: BCM5301X: Add DT for WZR-1166DHP,DHP2
  ARM: dts: add dts files for bcmbca soc 47622
  dt-bindings: arm: add bcmbca device tree binding document
  ARM: dts: bcm283x: Align ETH_CLK GPIO line name
  ARM: dts: bcm283x: Remove gpio line name NC
  ARM: dts: bcm2835-rpi-b: Fix GPIO line names
  ARM: dts: bcm2837-rpi-3-b-plus: Fix GPIO line name of power LED
  ARM: dts: bcm2837-rpi-cm3-io3: Fix GPIO line names for SMPS I2C
  ARM: dts: bcm2835-rpi-zero-w: Fix GPIO line name for Wifi/BT
  ARM: dts: BCM5301X: Disable gmac0 and enable port@8 on Asus RT-AC88U
  ARM: dts: broadcom: align SPI NOR node name with dtschema
  dt-bindings: arm: bcm: add bindings for Asus RT-AC88U
  ARM: dts: BCM5301X: Fix compatible strings for BCM53012 and BCM53016 SoC
  dt-bindings: arm: bcm: create new description for BCM53016
  dt-bindings: arm: bcm: fix BCM53012 and BCM53016 SoC strings
  ARM: dts: BCM5301X: Retrieve gmac1 MAC address from NVRAM on Asus RT-AC88U
  ARM: dts: BCM5301X: Add rgmii to port@5 of Broadcom switch on Asus RT-AC88U
  ARM: dts: BCM5301X: Remove cell properties from srab ports on Asus RT-AC88U
  ARM: dts: BCM5301X: Fix DTC warning for NAND node
  ARM: dts: BCM5301X: Update pin controller node name
  ...

Link: https://lore.kernel.org/r/20220504210942.1838248-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1  2 
arch/arm/boot/dts/Makefile

Simple merge