Similarly to commit
f6361c6b3880 ("ARM: S3C24XX: remove separate restart
code"), the platform watchdog reset code can be removed in favor of
a generic watchdog driver which already handles reset.
This allows removal of a bunch of machine code and fixes also W=1
compile warnings:
arch/arm/plat-samsung/watchdog-reset.c:29:6: warning: no previous prototype for 'samsung_wdt_reset' [-Wmissing-prototypes]
arch/arm/plat-samsung/watchdog-reset.c:69:13: warning: no previous prototype for 'samsung_wdt_reset_of_init' [-Wmissing-prototypes]
arch/arm/plat-samsung/watchdog-reset.c:89:13: warning: no previous prototype for 'samsung_wdt_reset_init' [-Wmissing-prototypes]
The generic watchdog-based system reset is not exactly the same as
before. The previous method had a fallback to soft_restart() which now
is gone.
The commit also removes a FIXME note about calling s3c64xx_clk_init()
inside s3c64xx_init_irq(). No one fixed this since long time and the
note is not meaningful anymore because watchdog part is removed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com>
select PM_GENERIC_DOMAINS if PM
select S3C_DEV_NAND if ATAGS
select S3C_GPIO_TRACK if ATAGS
+ select S3C2410_WATCHDOG
select SAMSUNG_ATAGS if ATAGS
select SAMSUNG_WAKEMASK if PM
- select SAMSUNG_WDT_RESET
+ select WATCHDOG
help
Samsung S3C64XX series based systems
#include "common.h"
#include "irq-uart.h"
-#include "watchdog-reset.h"
/* External clock frequency */
static unsigned long xtal_f __ro_after_init = 12000000;
void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
{
- /*
- * FIXME: there is no better place to put this at the moment
- * (s3c64xx_clk_init needs ioremap and must happen before init_time
- * samsung_wdt_reset_init needs clocks)
- */
s3c64xx_clk_init(NULL, xtal_f, xusbxti_f, soc_is_s3c6400(), S3C_VA_SYS);
- samsung_wdt_reset_init(S3C_VA_WATCHDOG);
printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
return 0;
}
arch_initcall(s3c64xx_init_irq_eint);
-
-void s3c64xx_restart(enum reboot_mode mode, const char *cmd)
-{
- if (mode != REBOOT_SOFT)
- samsung_wdt_reset();
-
- /* if all else fails, or mode was for soft, jump to 0 */
- soft_restart(0);
-}
void s3c64xx_init_irq(u32 vic0, u32 vic1);
void s3c64xx_init_io(struct map_desc *mach_desc, int size);
-void s3c64xx_restart(enum reboot_mode mode, const char *cmd);
-
struct device_node;
void s3c64xx_set_xtal_freq(unsigned long freq);
void s3c64xx_set_xusbxti_freq(unsigned long freq);
.map_io = anw6410_map_io,
.init_machine = anw6410_machine_init,
.init_time = samsung_timer_init,
- .restart = s3c64xx_restart,
MACHINE_END
.map_io = crag6410_map_io,
.init_machine = crag6410_machine_init,
.init_time = samsung_timer_init,
- .restart = s3c64xx_restart,
MACHINE_END
.map_io = hmt_map_io,
.init_machine = hmt_machine_init,
.init_time = samsung_timer_init,
- .restart = s3c64xx_restart,
MACHINE_END
.map_io = mini6410_map_io,
.init_machine = mini6410_machine_init,
.init_time = samsung_timer_init,
- .restart = s3c64xx_restart,
MACHINE_END
.map_io = ncp_map_io,
.init_machine = ncp_machine_init,
.init_time = samsung_timer_init,
- .restart = s3c64xx_restart,
MACHINE_END
.map_io = real6410_map_io,
.init_machine = real6410_machine_init,
.init_time = samsung_timer_init,
- .restart = s3c64xx_restart,
MACHINE_END
#include <mach/map.h>
#include "common.h"
-#include "watchdog-reset.h"
/*
* IO mapping for shared system controller IP.
panic("SoC is not S3C64xx!");
}
-static void __init s3c64xx_dt_init_machine(void)
-{
- samsung_wdt_reset_of_init();
-}
-
-static void s3c64xx_dt_restart(enum reboot_mode mode, const char *cmd)
-{
- if (mode != REBOOT_SOFT)
- samsung_wdt_reset();
-
- /* if all else fails, or mode was for soft, jump to 0 */
- soft_restart(0);
-}
-
static const char *const s3c64xx_dt_compat[] __initconst = {
"samsung,s3c6400",
"samsung,s3c6410",
/* Maintainer: Tomasz Figa <tomasz.figa@gmail.com> */
.dt_compat = s3c64xx_dt_compat,
.map_io = s3c64xx_dt_map_io,
- .init_machine = s3c64xx_dt_init_machine,
- .restart = s3c64xx_dt_restart,
MACHINE_END
.map_io = smartq_map_io,
.init_machine = smartq5_machine_init,
.init_time = samsung_timer_init,
- .restart = s3c64xx_restart,
MACHINE_END
.map_io = smartq_map_io,
.init_machine = smartq7_machine_init,
.init_time = samsung_timer_init,
- .restart = s3c64xx_restart,
MACHINE_END
.map_io = smdk6400_map_io,
.init_machine = smdk6400_machine_init,
.init_time = samsung_timer_init,
- .restart = s3c64xx_restart,
MACHINE_END
.map_io = smdk6410_map_io,
.init_machine = smdk6410_machine_init,
.init_time = samsung_timer_init,
- .restart = s3c64xx_restart,
MACHINE_END
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - System define for arch_reset() function
- */
-
-#ifndef __PLAT_SAMSUNG_WATCHDOG_RESET_H
-#define __PLAT_SAMSUNG_WATCHDOG_RESET_H
-
-extern void samsung_wdt_reset(void);
-extern void samsung_wdt_reset_of_init(void);
-extern void samsung_wdt_reset_init(void __iomem *base);
-
-#endif /* __PLAT_SAMSUNG_WATCHDOG_RESET_H */
and above. This code allows a set of interrupt to wakeup-mask
mappings. See <plat/wakeup-mask.h>
-config SAMSUNG_WDT_RESET
- bool
- help
- Compile support for system restart by triggering watchdog reset.
- Used on SoCs that do not provide dedicated reset control.
-
config DEBUG_S3C_UART
depends on PLAT_SAMSUNG
int
obj-$(CONFIG_SAMSUNG_PM_DEBUG) += pm-debug.o
obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o
-obj-$(CONFIG_SAMSUNG_WDT_RESET) += watchdog-reset.o
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2008 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-//
-// Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
-//
-// Watchdog reset support for Samsung SoCs.
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#define S3C2410_WTCON 0x00
-#define S3C2410_WTDAT 0x04
-#define S3C2410_WTCNT 0x08
-
-#define S3C2410_WTCON_ENABLE (1 << 5)
-#define S3C2410_WTCON_DIV16 (0 << 3)
-#define S3C2410_WTCON_RSTEN (1 << 0)
-#define S3C2410_WTCON_PRESCALE(x) ((x) << 8)
-
-static void __iomem *wdt_base;
-static struct clk *wdt_clock;
-
-void samsung_wdt_reset(void)
-{
- if (!wdt_base) {
- pr_err("%s: wdt reset not initialized\n", __func__);
- /* delay to allow the serial port to show the message */
- mdelay(50);
- return;
- }
-
- if (!IS_ERR(wdt_clock))
- clk_prepare_enable(wdt_clock);
-
- /* disable watchdog, to be safe */
- __raw_writel(0, wdt_base + S3C2410_WTCON);
-
- /* put initial values into count and data */
- __raw_writel(0x80, wdt_base + S3C2410_WTCNT);
- __raw_writel(0x80, wdt_base + S3C2410_WTDAT);
-
- /* set the watchdog to go and reset... */
- __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV16 |
- S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x20),
- wdt_base + S3C2410_WTCON);
-
- /* wait for reset to assert... */
- mdelay(500);
-
- pr_err("Watchdog reset failed to assert reset\n");
-
- /* delay to allow the serial port to show the message */
- mdelay(50);
-}
-
-#ifdef CONFIG_OF
-static const struct of_device_id s3c2410_wdt_match[] = {
- { .compatible = "samsung,s3c2410-wdt" },
- { .compatible = "samsung,s3c6410-wdt" },
- {},
-};
-
-void __init samsung_wdt_reset_of_init(void)
-{
- struct device_node *np;
-
- np = of_find_matching_node(NULL, s3c2410_wdt_match);
- if (!np) {
- pr_err("%s: failed to find watchdog node\n", __func__);
- return;
- }
-
- wdt_base = of_iomap(np, 0);
- if (!wdt_base) {
- pr_err("%s: failed to map watchdog registers\n", __func__);
- return;
- }
-
- wdt_clock = of_clk_get(np, 0);
-}
-#endif
-
-void __init samsung_wdt_reset_init(void __iomem *base)
-{
- wdt_base = base;
- wdt_clock = clk_get(NULL, "watchdog");
-}
projects / linux.git / commitdiff