#include <linux/types.h>
-enum fe_type {
- FE_QPSK,
- FE_QAM,
- FE_OFDM,
- FE_ATSC
-};
-
+/**
+ * enum fe_caps - Frontend capabilities
+ *
+ * @FE_IS_STUPID: There's something wrong at the
+ * frontend, and it can't report its
+ * capabilities.
+ * @FE_CAN_INVERSION_AUTO: Can auto-detect frequency spectral
+ * band inversion
+ * @FE_CAN_FEC_1_2: Supports FEC 1/2
+ * @FE_CAN_FEC_2_3: Supports FEC 2/3
+ * @FE_CAN_FEC_3_4: Supports FEC 3/4
+ * @FE_CAN_FEC_4_5: Supports FEC 4/5
+ * @FE_CAN_FEC_5_6: Supports FEC 5/6
+ * @FE_CAN_FEC_6_7: Supports FEC 6/7
+ * @FE_CAN_FEC_7_8: Supports FEC 7/8
+ * @FE_CAN_FEC_8_9: Supports FEC 8/9
+ * @FE_CAN_FEC_AUTO: Can auto-detect FEC
+ * @FE_CAN_QPSK: Supports QPSK modulation
+ * @FE_CAN_QAM_16: Supports 16-QAM modulation
+ * @FE_CAN_QAM_32: Supports 32-QAM modulation
+ * @FE_CAN_QAM_64: Supports 64-QAM modulation
+ * @FE_CAN_QAM_128: Supports 128-QAM modulation
+ * @FE_CAN_QAM_256: Supports 256-QAM modulation
+ * @FE_CAN_QAM_AUTO: Can auto-detect QAM modulation
+ * @FE_CAN_TRANSMISSION_MODE_AUTO: Can auto-detect transmission mode
+ * @FE_CAN_BANDWIDTH_AUTO: Can auto-detect bandwidth
+ * @FE_CAN_GUARD_INTERVAL_AUTO: Can auto-detect guard interval
+ * @FE_CAN_HIERARCHY_AUTO: Can auto-detect hierarchy
+ * @FE_CAN_8VSB: Supports 8-VSB modulation
+ * @FE_CAN_16VSB: Supporta 16-VSB modulation
+ * @FE_HAS_EXTENDED_CAPS: Unused
+ * @FE_CAN_MULTISTREAM: Supports multistream filtering
+ * @FE_CAN_TURBO_FEC: Supports "turbo FEC" modulation
+ * @FE_CAN_2G_MODULATION: Supports "2nd generation" modulation,
+ * e. g. DVB-S2, DVB-T2, DVB-C2
+ * @FE_NEEDS_BENDING: Unused
+ * @FE_CAN_RECOVER: Can recover from a cable unplug
+ * automatically
+ * @FE_CAN_MUTE_TS: Can stop spurious TS data output
+ */
enum fe_caps {
FE_IS_STUPID = 0,
FE_CAN_INVERSION_AUTO = 0x1,
FE_CAN_HIERARCHY_AUTO = 0x100000,
FE_CAN_8VSB = 0x200000,
FE_CAN_16VSB = 0x400000,
- FE_HAS_EXTENDED_CAPS = 0x800000, /* We need more bitspace for newer APIs, indicate this. */
- FE_CAN_MULTISTREAM = 0x4000000, /* frontend supports multistream filtering */
- FE_CAN_TURBO_FEC = 0x8000000, /* frontend supports "turbo fec modulation" */
- FE_CAN_2G_MODULATION = 0x10000000, /* frontend supports "2nd generation modulation" (DVB-S2) */
- FE_NEEDS_BENDING = 0x20000000, /* not supported anymore, don't use (frontend requires frequency bending) */
- FE_CAN_RECOVER = 0x40000000, /* frontend can recover from a cable unplug automatically */
- FE_CAN_MUTE_TS = 0x80000000 /* frontend can stop spurious TS data output */
+ FE_HAS_EXTENDED_CAPS = 0x800000,
+ FE_CAN_MULTISTREAM = 0x4000000,
+ FE_CAN_TURBO_FEC = 0x8000000,
+ FE_CAN_2G_MODULATION = 0x10000000,
+ FE_NEEDS_BENDING = 0x20000000,
+ FE_CAN_RECOVER = 0x40000000,
+ FE_CAN_MUTE_TS = 0x80000000
+};
+
+/*
+ * DEPRECATED: Should be kept just due to backward compatibility.
+ */
+enum fe_type {
+ FE_QPSK,
+ FE_QAM,
+ FE_OFDM,
+ FE_ATSC
};
+/**
+ * struct dvb_frontend_info - Frontend properties and capabilities
+ *
+ * @name: Name of the frontend
+ * @type: **DEPRECATED**.
+ * Should not be used on modern programs,
+ * as a frontend may have more than one type.
+ * In order to get the support types of a given
+ * frontend, use :c:type:`DTV_ENUM_DELSYS`
+ * instead.
+ * @frequency_min: Minimal frequency supported by the frontend.
+ * @frequency_max: Minimal frequency supported by the frontend.
+ * @frequency_stepsize: All frequencies are multiple of this value.
+ * @frequency_tolerance: Frequency tolerance.
+ * @symbol_rate_min: Minimal symbol rate, in bauds
+ * (for Cable/Satellite systems).
+ * @symbol_rate_max: Maximal symbol rate, in bauds
+ * (for Cable/Satellite systems).
+ * @symbol_rate_tolerance: Maximal symbol rate tolerance, in ppm
+ * (for Cable/Satellite systems).
+ * @notifier_delay: **DEPRECATED**. Not used by any driver.
+ * @caps: Capabilities supported by the frontend,
+ * as specified in &enum fe_caps.
+ *
+ * .. note:
+ *
+ * #. The frequencies are specified in Hz for Terrestrial and Cable
+ * systems.
+ * #. The frequencies are specified in kHz for Satellite systems.
+ */
struct dvb_frontend_info {
char name[128];
enum fe_type type; /* DEPRECATED. Use DTV_ENUM_DELSYS instead */
__u32 frequency_tolerance;
__u32 symbol_rate_min;
__u32 symbol_rate_max;
- __u32 symbol_rate_tolerance; /* ppm */
+ __u32 symbol_rate_tolerance;
__u32 notifier_delay; /* DEPRECATED */
enum fe_caps caps;
};
-
/**
- * Check out the DiSEqC bus spec available on http://www.eutelsat.org/ for
- * the meaning of this struct...
+ * struct dvb_diseqc_master_cmd - DiSEqC master command
+ *
+ * @msg:
+ * DiSEqC message to be sent. It contains a 3 bytes header with:
+ * framing + address + command, and an optional argument
+ * of up to 3 bytes of data.
+ * @msg_len:
+ * Length of the DiSEqC message. Valid values are 3 to 6.
+ *
+ * Check out the DiSEqC bus spec available on http://www.eutelsat.org/ for
+ * the possible messages that can be used.
*/
struct dvb_diseqc_master_cmd {
- __u8 msg [6]; /* { framing, address, command, data [3] } */
- __u8 msg_len; /* valid values are 3...6 */
+ __u8 msg[6];
+ __u8 msg_len;
};
+/**
+ * struct dvb_diseqc_slave_reply - DiSEqC received data
+ *
+ * @msg:
+ * DiSEqC message buffer to store a message received via DiSEqC.
+ * It contains one byte header with: framing and
+ * an optional argument of up to 3 bytes of data.
+ * @msg_len:
+ * Length of the DiSEqC message. Valid values are 0 to 4,
+ * where 0 means no message.
+ * @timeout:
+ * Return from ioctl after timeout ms with errorcode when
+ * no message was received.
+ *
+ * Check out the DiSEqC bus spec available on http://www.eutelsat.org/ for
+ * the possible messages that can be used.
+ */
struct dvb_diseqc_slave_reply {
- __u8 msg [4]; /* { framing, data [3] } */
- __u8 msg_len; /* valid values are 0...4, 0 means no msg */
- int timeout; /* return from ioctl after timeout ms with */
-}; /* errorcode when no message was received */
+ __u8 msg[4];
+ __u8 msg_len;
+ int timeout;
+};
+/**
+ * enum fe_sec_voltage - DC Voltage used to feed the LNBf
+ *
+ * @SEC_VOLTAGE_13: Output 13V to the LNBf
+ * @SEC_VOLTAGE_18: Output 18V to the LNBf
+ * @SEC_VOLTAGE_OFF: Don't feed the LNBf with a DC voltage
+ */
enum fe_sec_voltage {
SEC_VOLTAGE_13,
SEC_VOLTAGE_18,
SEC_VOLTAGE_OFF
};
+/**
+ * enum fe_sec_tone_mode - Type of tone to be send to the LNBf.
+ * @SEC_TONE_ON: Sends a 22kHz tone burst to the antenna.
+ * @SEC_TONE_OFF: Don't send a 22kHz tone to the antenna (except
+ * if the ``FE_DISEQC_*`` ioctls are called).
+ */
enum fe_sec_tone_mode {
SEC_TONE_ON,
SEC_TONE_OFF
};
+/**
+ * enum fe_sec_mini_cmd - Type of mini burst to be sent
+ *
+ * @SEC_MINI_A: Sends a mini-DiSEqC 22kHz '0' Tone Burst to select
+ * satellite-A
+ * @SEC_MINI_B: Sends a mini-DiSEqC 22kHz '1' Data Burst to select
+ * satellite-B
+ */
enum fe_sec_mini_cmd {
SEC_MINI_A,
SEC_MINI_B
};
/**
- * enum fe_status - enumerates the possible frontend status
- * @FE_HAS_SIGNAL: found something above the noise level
- * @FE_HAS_CARRIER: found a DVB signal
- * @FE_HAS_VITERBI: FEC is stable
- * @FE_HAS_SYNC: found sync bytes
- * @FE_HAS_LOCK: everything's working
- * @FE_TIMEDOUT: no lock within the last ~2 seconds
- * @FE_REINIT: frontend was reinitialized, application is recommended
- * to reset DiSEqC, tone and parameters
+ * enum fe_status - Enumerates the possible frontend status.
+ * @FE_NONE: The frontend doesn't have any kind of lock.
+ * That's the initial frontend status
+ * @FE_HAS_SIGNAL: Has found something above the noise level.
+ * @FE_HAS_CARRIER: Has found a DVB signal.
+ * @FE_HAS_VITERBI: FEC inner coding (Viterbi, LDPC or other inner code).
+ * is stable.
+ * @FE_HAS_SYNC: Synchronization bytes was found.
+ * @FE_HAS_LOCK: DVB were locked and everything is working.
+ * @FE_TIMEDOUT: Fo lock within the last about 2 seconds.
+ * @FE_REINIT: Frontend was reinitialized, application is recommended
+ * to reset DiSEqC, tone and parameters.
*/
enum fe_status {
FE_NONE = 0x00,
FE_REINIT = 0x40,
};
+/**
+ * enum fe_spectral_inversion - Type of inversion band
+ *
+ * @INVERSION_OFF: Don't do spectral band inversion.
+ * @INVERSION_ON: Do spectral band inversion.
+ * @INVERSION_AUTO: Autodetect spectral band inversion.
+ *
+ * This parameter indicates if spectral inversion should be presumed or
+ * not. In the automatic setting (``INVERSION_AUTO``) the hardware will try
+ * to figure out the correct setting by itself. If the hardware doesn't
+ * support, the DVB core will try to lock at the carrier first with
+ * inversion off. If it fails, it will try to enable inversion.
+ */
enum fe_spectral_inversion {
INVERSION_OFF,
INVERSION_ON,
INVERSION_AUTO
};
+/**
+ * enum fe_code_rate - Type of Forward Error Correction (FEC)
+ *
+ *
+ * @FEC_NONE: No Forward Error Correction Code
+ * @FEC_1_2: Forward Error Correction Code 1/2
+ * @FEC_2_3: Forward Error Correction Code 2/3
+ * @FEC_3_4: Forward Error Correction Code 3/4
+ * @FEC_4_5: Forward Error Correction Code 4/5
+ * @FEC_5_6: Forward Error Correction Code 5/6
+ * @FEC_6_7: Forward Error Correction Code 6/7
+ * @FEC_7_8: Forward Error Correction Code 7/8
+ * @FEC_8_9: Forward Error Correction Code 8/9
+ * @FEC_AUTO: Autodetect Error Correction Code
+ * @FEC_3_5: Forward Error Correction Code 3/5
+ * @FEC_9_10: Forward Error Correction Code 9/10
+ * @FEC_2_5: Forward Error Correction Code 2/5
+ *
+ * Please note that not all FEC types are supported by a given standard.
+ */
enum fe_code_rate {
FEC_NONE = 0,
FEC_1_2,
FEC_2_5,
};
+/**
+ * enum fe_modulation - Type of modulation/constellation
+ * @QPSK: QPSK modulation
+ * @QAM_16: 16-QAM modulation
+ * @QAM_32: 32-QAM modulation
+ * @QAM_64: 64-QAM modulation
+ * @QAM_128: 128-QAM modulation
+ * @QAM_256: 256-QAM modulation
+ * @QAM_AUTO: Autodetect QAM modulation
+ * @VSB_8: 8-VSB modulation
+ * @VSB_16: 16-VSB modulation
+ * @PSK_8: 8-PSK modulation
+ * @APSK_16: 16-APSK modulation
+ * @APSK_32: 32-APSK modulation
+ * @DQPSK: DQPSK modulation
+ * @QAM_4_NR: 4-QAM-NR modulation
+ *
+ * Please note that not all modulations are supported by a given standard.
+ *
+ */
enum fe_modulation {
QPSK,
QAM_16,
QAM_4_NR,
};
+/**
+ * enum fe_transmit_mode - Transmission mode
+ *
+ * @TRANSMISSION_MODE_AUTO:
+ * Autodetect transmission mode. The hardware will try to find the
+ * correct FFT-size (if capable) to fill in the missing parameters.
+ * @TRANSMISSION_MODE_1K:
+ * Transmission mode 1K
+ * @TRANSMISSION_MODE_2K:
+ * Transmission mode 2K
+ * @TRANSMISSION_MODE_8K:
+ * Transmission mode 8K
+ * @TRANSMISSION_MODE_4K:
+ * Transmission mode 4K
+ * @TRANSMISSION_MODE_16K:
+ * Transmission mode 16K
+ * @TRANSMISSION_MODE_32K:
+ * Transmission mode 32K
+ * @TRANSMISSION_MODE_C1:
+ * Single Carrier (C=1) transmission mode (DTMB only)
+ * @TRANSMISSION_MODE_C3780:
+ * Multi Carrier (C=3780) transmission mode (DTMB only)
+ *
+ * Please note that not all transmission modes are supported by a given
+ * standard.
+ */
enum fe_transmit_mode {
TRANSMISSION_MODE_2K,
TRANSMISSION_MODE_8K,
TRANSMISSION_MODE_C3780,
};
+/**
+ * enum fe_guard_interval - Guard interval
+ *
+ * @GUARD_INTERVAL_AUTO: Autodetect the guard interval
+ * @GUARD_INTERVAL_1_128: Guard interval 1/128
+ * @GUARD_INTERVAL_1_32: Guard interval 1/32
+ * @GUARD_INTERVAL_1_16: Guard interval 1/16
+ * @GUARD_INTERVAL_1_8: Guard interval 1/8
+ * @GUARD_INTERVAL_1_4: Guard interval 1/4
+ * @GUARD_INTERVAL_19_128: Guard interval 19/128
+ * @GUARD_INTERVAL_19_256: Guard interval 19/256
+ * @GUARD_INTERVAL_PN420: PN length 420 (1/4)
+ * @GUARD_INTERVAL_PN595: PN length 595 (1/6)
+ * @GUARD_INTERVAL_PN945: PN length 945 (1/9)
+ *
+ * Please note that not all guard intervals are supported by a given standard.
+ */
enum fe_guard_interval {
GUARD_INTERVAL_1_32,
GUARD_INTERVAL_1_16,
GUARD_INTERVAL_PN945,
};
+/**
+ * enum fe_hierarchy - Hierarchy
+ * @HIERARCHY_NONE: No hierarchy
+ * @HIERARCHY_AUTO: Autodetect hierarchy (if supported)
+ * @HIERARCHY_1: Hierarchy 1
+ * @HIERARCHY_2: Hierarchy 2
+ * @HIERARCHY_4: Hierarchy 4
+ *
+ * Please note that not all hierarchy types are supported by a given standard.
+ */
enum fe_hierarchy {
HIERARCHY_NONE,
HIERARCHY_1,
HIERARCHY_AUTO
};
+/**
+ * enum fe_interleaving - Interleaving
+ * @INTERLEAVING_NONE: No interleaving.
+ * @INTERLEAVING_AUTO: Auto-detect interleaving.
+ * @INTERLEAVING_240: Interleaving of 240 symbols.
+ * @INTERLEAVING_720: Interleaving of 720 symbols.
+ *
+ * Please note that, currently, only DTMB uses it.
+ */
enum fe_interleaving {
INTERLEAVING_NONE,
INTERLEAVING_AUTO,
INTERLEAVING_720,
};
-/* S2API Commands */
+/* DVBv5 property Commands */
+
#define DTV_UNDEFINED 0
#define DTV_TUNE 1
#define DTV_CLEAR 2
#define DTV_MAX_COMMAND DTV_STAT_TOTAL_BLOCK_COUNT
+/**
+ * enum fe_pilot - Type of pilot tone
+ *
+ * @PILOT_ON: Pilot tones enabled
+ * @PILOT_OFF: Pilot tones disabled
+ * @PILOT_AUTO: Autodetect pilot tones
+ */
enum fe_pilot {
PILOT_ON,
PILOT_OFF,
PILOT_AUTO,
};
+/**
+ * enum fe_rolloff - Rolloff factor (also known as alpha)
+ * @ROLLOFF_35: Roloff factor: 35%
+ * @ROLLOFF_20: Roloff factor: 20%
+ * @ROLLOFF_25: Roloff factor: 25%
+ * @ROLLOFF_AUTO: Auto-detect the roloff factor.
+ *
+ * .. note:
+ *
+ * Roloff factor of 35% is implied on DVB-S. On DVB-S2, it is default.
+ */
enum fe_rolloff {
- ROLLOFF_35, /* Implied value in DVB-S, default for DVB-S2 */
+ ROLLOFF_35,
ROLLOFF_20,
ROLLOFF_25,
ROLLOFF_AUTO,
};
+/**
+ * enum fe_delivery_system - Type of the delivery system
+ *
+ * @SYS_UNDEFINED:
+ * Undefined standard. Generally, indicates an error
+ * @SYS_DVBC_ANNEX_A:
+ * Cable TV: DVB-C following ITU-T J.83 Annex A spec
+ * @SYS_DVBC_ANNEX_B:
+ * Cable TV: DVB-C following ITU-T J.83 Annex B spec (ClearQAM)
+ * @SYS_DVBC_ANNEX_C:
+ * Cable TV: DVB-C following ITU-T J.83 Annex C spec
+ * @SYS_ISDBC:
+ * Cable TV: ISDB-C (no drivers yet)
+ * @SYS_DVBT:
+ * Terrestrial TV: DVB-T
+ * @SYS_DVBT2:
+ * Terrestrial TV: DVB-T2
+ * @SYS_ISDBT:
+ * Terrestrial TV: ISDB-T
+ * @SYS_ATSC:
+ * Terrestrial TV: ATSC
+ * @SYS_ATSCMH:
+ * Terrestrial TV (mobile): ATSC-M/H
+ * @SYS_DTMB:
+ * Terrestrial TV: DTMB
+ * @SYS_DVBS:
+ * Satellite TV: DVB-S
+ * @SYS_DVBS2:
+ * Satellite TV: DVB-S2
+ * @SYS_TURBO:
+ * Satellite TV: DVB-S Turbo
+ * @SYS_ISDBS:
+ * Satellite TV: ISDB-S
+ * @SYS_DAB:
+ * Digital audio: DAB (not fully supported)
+ * @SYS_DSS:
+ * Satellite TV: DSS (not fully supported)
+ * @SYS_CMMB:
+ * Terrestrial TV (mobile): CMMB (not fully supported)
+ * @SYS_DVBH:
+ * Terrestrial TV (mobile): DVB-H (standard deprecated)
+ */
enum fe_delivery_system {
SYS_UNDEFINED,
SYS_DVBC_ANNEX_A,
SYS_DVBC_ANNEX_C,
};
-/* backward compatibility */
+/* backward compatibility definitions for delivery systems */
#define SYS_DVBC_ANNEX_AC SYS_DVBC_ANNEX_A
-#define SYS_DMBTH SYS_DTMB /* DMB-TH is legacy name, use DTMB instead */
+#define SYS_DMBTH SYS_DTMB /* DMB-TH is legacy name, use DTMB */
-/* ATSC-MH */
+/* ATSC-MH specific parameters */
+/**
+ * enum atscmh_sccc_block_mode - Type of Series Concatenated Convolutional
+ * Code Block Mode.
+ *
+ * @ATSCMH_SCCC_BLK_SEP:
+ * Separate SCCC: the SCCC outer code mode shall be set independently
+ * for each Group Region (A, B, C, D)
+ * @ATSCMH_SCCC_BLK_COMB:
+ * Combined SCCC: all four Regions shall have the same SCCC outer
+ * code mode.
+ * @ATSCMH_SCCC_BLK_RES:
+ * Reserved. Shouldn't be used.
+ */
enum atscmh_sccc_block_mode {
ATSCMH_SCCC_BLK_SEP = 0,
ATSCMH_SCCC_BLK_COMB = 1,
ATSCMH_SCCC_BLK_RES = 2,
};
+/**
+ * enum atscmh_sccc_code_mode - Type of Series Concatenated Convolutional
+ * Code Rate.
+ *
+ * @ATSCMH_SCCC_CODE_HLF:
+ * The outer code rate of a SCCC Block is 1/2 rate.
+ * @ATSCMH_SCCC_CODE_QTR:
+ * The outer code rate of a SCCC Block is 1/4 rate.
+ * @ATSCMH_SCCC_CODE_RES:
+ * Reserved. Should not be used.
+ */
enum atscmh_sccc_code_mode {
ATSCMH_SCCC_CODE_HLF = 0,
ATSCMH_SCCC_CODE_QTR = 1,
ATSCMH_SCCC_CODE_RES = 2,
};
+/**
+ * enum atscmh_rs_frame_ensemble - Reed Solomon(RS) frame ensemble.
+ *
+ * @ATSCMH_RSFRAME_ENS_PRI: Primary Ensemble.
+ * @ATSCMH_RSFRAME_ENS_SEC: Secondary Ensemble.
+ */
enum atscmh_rs_frame_ensemble {
ATSCMH_RSFRAME_ENS_PRI = 0,
ATSCMH_RSFRAME_ENS_SEC = 1,
};
+/**
+ * enum atscmh_rs_frame_mode - Reed Solomon (RS) frame mode.
+ *
+ * @ATSCMH_RSFRAME_PRI_ONLY:
+ * Single Frame: There is only a primary RS Frame for all Group
+ * Regions.
+ * @ATSCMH_RSFRAME_PRI_SEC:
+ * Dual Frame: There are two separate RS Frames: Primary RS Frame for
+ * Group Region A and B and Secondary RS Frame for Group Region C and
+ * D.
+ * @ATSCMH_RSFRAME_RES:
+ * Reserved. Shouldn't be used.
+ */
enum atscmh_rs_frame_mode {
ATSCMH_RSFRAME_PRI_ONLY = 0,
ATSCMH_RSFRAME_PRI_SEC = 1,
ATSCMH_RSFRAME_RES = 2,
};
+/**
+ * enum atscmh_rs_code_mode
+ * @ATSCMH_RSCODE_211_187: Reed Solomon code (211,187).
+ * @ATSCMH_RSCODE_223_187: Reed Solomon code (223,187).
+ * @ATSCMH_RSCODE_235_187: Reed Solomon code (235,187).
+ * @ATSCMH_RSCODE_RES: Reserved. Shouldn't be used.
+ */
enum atscmh_rs_code_mode {
ATSCMH_RSCODE_211_187 = 0,
ATSCMH_RSCODE_223_187 = 1,
#define LNA_AUTO (~0U)
/**
- * Scale types for the quality parameters.
+ * enum fecap_scale_params - scale types for the quality parameters.
+ *
* @FE_SCALE_NOT_AVAILABLE: That QoS measure is not available. That
* could indicate a temporary or a permanent
* condition.
* @FE_SCALE_DECIBEL: The scale is measured in 0.001 dB steps, typically
- * used on signal measures.
+ * used on signal measures.
* @FE_SCALE_RELATIVE: The scale is a relative percentual measure,
- * ranging from 0 (0%) to 0xffff (100%).
+ * ranging from 0 (0%) to 0xffff (100%).
* @FE_SCALE_COUNTER: The scale counts the occurrence of an event, like
- * bit error, block error, lapsed time.
+ * bit error, block error, lapsed time.
*/
enum fecap_scale_params {
FE_SCALE_NOT_AVAILABLE = 0,
/**
* struct dtv_stats - Used for reading a DTV status property
*
- * @value: value of the measure. Should range from 0 to 0xffff;
* @scale: Filled with enum fecap_scale_params - the scale
* in usage for that parameter
*
+ * The ``{unnamed_union}`` may have either one of the values below:
+ *
+ * %svalue
+ * integer value of the measure, for %FE_SCALE_DECIBEL,
+ * used for dB measures. The unit is 0.001 dB.
+ *
+ * %uvalue
+ * unsigned integer value of the measure, used when @scale is
+ * either %FE_SCALE_RELATIVE or %FE_SCALE_COUNTER.
+ *
* For most delivery systems, this will return a single value for each
* parameter.
+ *
* It should be noticed, however, that new OFDM delivery systems like
* ISDB can use different modulation types for each group of carriers.
* On such standards, up to 8 groups of statistics can be provided, one
* for each carrier group (called "layer" on ISDB).
+ *
* In order to be consistent with other delivery systems, the first
* value refers to the entire set of carriers ("global").
- * dtv_status:scale should use the value FE_SCALE_NOT_AVAILABLE when
+ *
+ * @scale should use the value %FE_SCALE_NOT_AVAILABLE when
* the value for the entire group of carriers or from one specific layer
* is not provided by the hardware.
- * st.len should be filled with the latest filled status + 1.
*
- * In other words, for ISDB, those values should be filled like:
+ * @len should be filled with the latest filled status + 1.
+ *
+ * In other words, for ISDB, those values should be filled like::
+ *
* u.st.stat.svalue[0] = global statistics;
* u.st.stat.scale[0] = FE_SCALE_DECIBEL;
* u.st.stat.value[1] = layer A statistics;
#define MAX_DTV_STATS 4
+/**
+ * struct dtv_fe_stats - store Digital TV frontend statistics
+ *
+ * @len: length of the statistics - if zero, stats is disabled.
+ * @stat: array with digital TV statistics.
+ *
+ * On most standards, @len can either be 0 or 1. However, for ISDB, each
+ * layer is modulated in separate. So, each layer may have its own set
+ * of statistics. If so, stat[0] carries on a global value for the property.
+ * Indexes 1 to 3 means layer A to B.
+ */
struct dtv_fe_stats {
__u8 len;
struct dtv_stats stat[MAX_DTV_STATS];
} __attribute__ ((packed));
+/**
+ * struct dtv_property - store one of frontend command and its value
+ *
+ * @cmd: Digital TV command.
+ * @reserved: Not used.
+ * @u: Union with the values for the command.
+ * @result: Result of the command set (currently unused).
+ *
+ * The @u union may have either one of the values below:
+ *
+ * %data
+ * an unsigned 32-bits number.
+ * %st
+ * a &struct dtv_fe_stats array of statistics.
+ * %buffer
+ * a buffer of up to 32 characters (currently unused).
+ */
struct dtv_property {
__u32 cmd;
__u32 reserved[3];
/* num of properties cannot exceed DTV_IOCTL_MAX_MSGS per ioctl */
#define DTV_IOCTL_MAX_MSGS 64
+/**
+ * struct dtv_properties - a set of command/value pairs.
+ *
+ * @num: amount of commands stored at the struct.
+ * @props: a pointer to &struct dtv_property.
+ */
struct dtv_properties {
__u32 num;
struct dtv_property *props;
};
+/*
+ * When set, this flag will disable any zigzagging or other "normal" tuning
+ * behavior. Additionally, there will be no automatic monitoring of the lock
+ * status, and hence no frontend events will be generated. If a frontend device
+ * is closed, this flag will be automatically turned off when the device is
+ * reopened read-write.
+ */
+#define FE_TUNE_MODE_ONESHOT 0x01
+
+/* Digital TV Frontend API calls */
+
+#define FE_GET_INFO _IOR('o', 61, struct dvb_frontend_info)
+
+#define FE_DISEQC_RESET_OVERLOAD _IO('o', 62)
+#define FE_DISEQC_SEND_MASTER_CMD _IOW('o', 63, struct dvb_diseqc_master_cmd)
+#define FE_DISEQC_RECV_SLAVE_REPLY _IOR('o', 64, struct dvb_diseqc_slave_reply)
+#define FE_DISEQC_SEND_BURST _IO('o', 65) /* fe_sec_mini_cmd_t */
+
+#define FE_SET_TONE _IO('o', 66) /* fe_sec_tone_mode_t */
+#define FE_SET_VOLTAGE _IO('o', 67) /* fe_sec_voltage_t */
+#define FE_ENABLE_HIGH_LNB_VOLTAGE _IO('o', 68) /* int */
+
+#define FE_READ_STATUS _IOR('o', 69, fe_status_t)
+#define FE_READ_BER _IOR('o', 70, __u32)
+#define FE_READ_SIGNAL_STRENGTH _IOR('o', 71, __u16)
+#define FE_READ_SNR _IOR('o', 72, __u16)
+#define FE_READ_UNCORRECTED_BLOCKS _IOR('o', 73, __u32)
+
+#define FE_SET_FRONTEND_TUNE_MODE _IO('o', 81) /* unsigned int */
+#define FE_GET_EVENT _IOR('o', 78, struct dvb_frontend_event)
+
+#define FE_DISHNETWORK_SEND_LEGACY_CMD _IO('o', 80) /* unsigned int */
+
+#define FE_SET_PROPERTY _IOW('o', 82, struct dtv_properties)
+#define FE_GET_PROPERTY _IOR('o', 83, struct dtv_properties)
+
#if defined(__DVB_CORE__) || !defined (__KERNEL__)
/*
- * DEPRECATED: The DVBv3 ioctls, structs and enums should not be used on
- * newer programs, as it doesn't support the second generation of digital
- * TV standards, nor supports newer delivery systems.
+ * DEPRECATED: Everything below is deprecated in favor of DVBv5 API
+ *
+ * The DVBv3 only ioctls, structs and enums should not be used on
+ * newer programs, as it doesn't support the second generation of
+ * digital TV standards, nor supports newer delivery systems.
+ * They also don't support modern frontends with usually support multiple
+ * delivery systems.
+ *
+ * Drivers shouldn't use them.
+ *
+ * New applications should use DVBv5 delivery system instead
+ */
+
+/*
*/
enum fe_bandwidth {
BANDWIDTH_1_712_MHZ,
};
-/* This is needed for legacy userspace support */
+/* This is kept for legacy userspace support */
typedef enum fe_sec_voltage fe_sec_voltage_t;
typedef enum fe_caps fe_caps_t;
typedef enum fe_type fe_type_t;
typedef enum fe_rolloff fe_rolloff_t;
typedef enum fe_delivery_system fe_delivery_system_t;
+/* DVBv3 structs */
+
struct dvb_qpsk_parameters {
__u32 symbol_rate; /* symbol rate in Symbols per second */
fe_code_rate_t fec_inner; /* forward error correction (see above) */
fe_status_t status;
struct dvb_frontend_parameters parameters;
};
-#endif
-
-#define FE_SET_PROPERTY _IOW('o', 82, struct dtv_properties)
-#define FE_GET_PROPERTY _IOR('o', 83, struct dtv_properties)
-
-/**
- * When set, this flag will disable any zigzagging or other "normal" tuning
- * behaviour. Additionally, there will be no automatic monitoring of the lock
- * status, and hence no frontend events will be generated. If a frontend device
- * is closed, this flag will be automatically turned off when the device is
- * reopened read-write.
- */
-#define FE_TUNE_MODE_ONESHOT 0x01
-#define FE_GET_INFO _IOR('o', 61, struct dvb_frontend_info)
-
-#define FE_DISEQC_RESET_OVERLOAD _IO('o', 62)
-#define FE_DISEQC_SEND_MASTER_CMD _IOW('o', 63, struct dvb_diseqc_master_cmd)
-#define FE_DISEQC_RECV_SLAVE_REPLY _IOR('o', 64, struct dvb_diseqc_slave_reply)
-#define FE_DISEQC_SEND_BURST _IO('o', 65) /* fe_sec_mini_cmd_t */
-
-#define FE_SET_TONE _IO('o', 66) /* fe_sec_tone_mode_t */
-#define FE_SET_VOLTAGE _IO('o', 67) /* fe_sec_voltage_t */
-#define FE_ENABLE_HIGH_LNB_VOLTAGE _IO('o', 68) /* int */
-
-#define FE_READ_STATUS _IOR('o', 69, fe_status_t)
-#define FE_READ_BER _IOR('o', 70, __u32)
-#define FE_READ_SIGNAL_STRENGTH _IOR('o', 71, __u16)
-#define FE_READ_SNR _IOR('o', 72, __u16)
-#define FE_READ_UNCORRECTED_BLOCKS _IOR('o', 73, __u32)
+/* DVBv3 API calls */
#define FE_SET_FRONTEND _IOW('o', 76, struct dvb_frontend_parameters)
#define FE_GET_FRONTEND _IOR('o', 77, struct dvb_frontend_parameters)
-#define FE_SET_FRONTEND_TUNE_MODE _IO('o', 81) /* unsigned int */
-#define FE_GET_EVENT _IOR('o', 78, struct dvb_frontend_event)
-#define FE_DISHNETWORK_SEND_LEGACY_CMD _IO('o', 80) /* unsigned int */
+#endif
#endif /*_DVBFRONTEND_H_*/
projects / linux.git / commitdiff