dp8393x: fix CAM descriptor entry index

Currently when a LOAD CAM command is executed the entries are loaded into the
CAM from memory in order which is incorrect. According to the datasheet the
first entry in the CAM descriptor is the entry index which means that each
descriptor may update any single entry in the CAM rather than the Nth entry.

Decode the CAM entry index and use it store the descriptor in the appropriate
slot in the CAM. This fixes the issue where the MacOS toolbox loads a single
CAM descriptor into the final slot in order to perform a loopback test which
must succeed before the Ethernet port is enabled.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210625065401.30170-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

diff --git a/hw/net/dp8393x.c b/hw/net/dp8393x.c
index 252c0a26641369644470dc31010cdcf3d510764e..11810c9b6000361b06c0a68446819949e5f27baf 100644 (file)
--- a/hw/net/dp8393x.c
+++ b/hw/net/dp8393x.c
@@ -270,7 +270,7 @@ static void dp8393x_update_irq(dp8393xState *s)
 static void dp8393x_do_load_cam(dp8393xState *s)
 {
     int width, size;
-    uint16_t index = 0;
+    uint16_t index;
 
     width = (s->regs[SONIC_DCR] & SONIC_DCR_DW) ? 2 : 1;
     size = sizeof(uint16_t) * 4 * width;
@@ -279,6 +279,7 @@ static void dp8393x_do_load_cam(dp8393xState *s)
         /* Fill current entry */
         address_space_read(&s->as, dp8393x_cdp(s),
                            MEMTXATTRS_UNSPECIFIED, s->data, size);
+        index = dp8393x_get(s, width, 0) & 0xf;
         s->cam[index][0] = dp8393x_get(s, width, 1) & 0xff;
         s->cam[index][1] = dp8393x_get(s, width, 1) >> 8;
         s->cam[index][2] = dp8393x_get(s, width, 2) & 0xff;
@@ -291,7 +292,6 @@ static void dp8393x_do_load_cam(dp8393xState *s)
         /* Move to next entry */
         s->regs[SONIC_CDC]--;
         s->regs[SONIC_CDP] += size;
-        index++;
     }
 
     /* Read CAM enable */