arm64: dts: meson: g12: add temperature sensor

Add cpu and ddr temperature sensors for G12 Socs

Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 21c155f4508cc2695723676e011cdf2cd16d1e09..f153194b9bf3a8fefb15e2d82b3920836229ae83 100644 (file)
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -1380,6 +1380,26 @@
                                };
                        };
 
+                       cpu_temp: temperature-sensor@34800 {
+                               compatible = "amlogic,g12a-cpu-thermal",
+                                            "amlogic,g12a-thermal";
+                               reg = <0x0 0x34800 0x0 0x50>;
+                               interrupts = <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>;
+                               clocks = <&clkc CLKID_TS>;
+                               #thermal-sensor-cells = <0>;
+                               amlogic,ao-secure = <&sec_AO>;
+                       };
+
+                       ddr_temp: temperature-sensor@34c00 {
+                               compatible = "amlogic,g12a-ddr-thermal",
+                                            "amlogic,g12a-thermal";
+                               reg = <0x0 0x34c00 0x0 0x50>;
+                               interrupts = <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>;
+                               clocks = <&clkc CLKID_TS>;
+                               #thermal-sensor-cells = <0>;
+                               amlogic,ao-secure = <&sec_AO>;
+                       };
+
                        usb2_phy0: phy@36000 {
                                compatible = "amlogic,g12a-usb2-phy";
                                reg = <0x0 0x36000 0x0 0x2000>;