hw/misc/max111x: Use GPIO lines rather than max111x_set_input()

The max111x ADC device model allows other code to set the level on
the 8 ADC inputs using the max111x_set_input() function.  Replace
this with generic qdev GPIO inputs, which also allow inputs to be set
to arbitrary values.

Using GPIO lines will make it easier for board code to wire things
up, so that if device A wants to set the ADC input it doesn't need to
have a direct pointer to the max111x but can just set that value on
its output GPIO, which is then wired up by the board to the
appropriate max111x input.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200628142429.17111-11-peter.maydell@linaro.org

diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c
index 93a25edcb5bc9464629401b16c2bfa755d1ea681..fa592aad6d6ee83411dc2793a7bf85a68239c9b4 100644 (file)
--- a/hw/arm/spitz.c
+++ b/hw/arm/spitz.c
@@ -696,13 +696,14 @@ static void corgi_ssp_gpio_cs(void *opaque, int line, int level)
 
 static void spitz_adc_temp_on(void *opaque, int line, int level)
 {
+    int batt_temp;
+
     if (!max1111)
         return;
 
-    if (level)
-        max111x_set_input(max1111, MAX1111_BATT_TEMP, SPITZ_BATTERY_TEMP);
-    else
-        max111x_set_input(max1111, MAX1111_BATT_TEMP, 0);
+    batt_temp = level ? SPITZ_BATTERY_TEMP : 0;
+
+    qemu_set_irq(qdev_get_gpio_in(max1111, MAX1111_BATT_TEMP), batt_temp);
 }
 
 static void corgi_ssp_realize(SSISlave *d, Error **errp)

diff --git a/hw/misc/max111x.c b/hw/misc/max111x.c
index abddfa3c66049761d694ee094009e24a5363f490..3a5cb83844589870339f952d4e94aeca73194ea1 100644 (file)
--- a/hw/misc/max111x.c
+++ b/hw/misc/max111x.c
@@ -131,12 +131,21 @@ static const VMStateDescription vmstate_max111x = {
     }
 };
 
+static void max111x_input_set(void *opaque, int line, int value)
+{
+    MAX111xState *s = MAX_111X(opaque);
+
+    assert(line >= 0 && line < s->inputs);
+    s->input[line] = value;
+}
+
 static int max111x_init(SSISlave *d, int inputs)
 {
     DeviceState *dev = DEVICE(d);
     MAX111xState *s = MAX_111X(dev);
 
     qdev_init_gpio_out(dev, &s->interrupt, 1);
+    qdev_init_gpio_in(dev, max111x_input_set, inputs);
 
     s->inputs = inputs;
 
@@ -153,13 +162,6 @@ static void max1111_realize(SSISlave *dev, Error **errp)
     max111x_init(dev, 4);
 }
 
-void max111x_set_input(DeviceState *dev, int line, uint8_t value)
-{
-    MAX111xState *s = MAX_111X(dev);
-    assert(line >= 0 && line < s->inputs);
-    s->input[line] = value;
-}
-
 static void max111x_reset(DeviceState *dev)
 {
     MAX111xState *s = MAX_111X(dev);

diff --git a/include/hw/ssi/ssi.h b/include/hw/ssi/ssi.h
index 4be5325e654e957f7324569312a66cd6646ef77a..5fd411f2e4e06588700b5e76f7e76de020fad96b 100644 (file)
--- a/include/hw/ssi/ssi.h
+++ b/include/hw/ssi/ssi.h
@@ -111,7 +111,4 @@ SSIBus *ssi_create_bus(DeviceState *parent, const char *name);
 
 uint32_t ssi_transfer(SSIBus *bus, uint32_t val);
 
-/* max111x.c */
-void max111x_set_input(DeviceState *dev, int line, uint8_t value);
-
 #endif