ARM: dts: uniphier: Add USB3 controller nodes for Pro5

Add USB3 controller nodes for Pro5 SoC and the boards.

Pro5 SoC has 2 controllers. USB0 includes 1 SS-PHY and 1 HS-PHY, and USB1
includes 1 SS-PHY and 2 HS-PHY.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi
index da772429b55a7e74664dd15c69267d9a3308864c..36e4f31ee5fe8d0ad53447f1dc77e68e7d84b912 100644 (file)
--- a/arch/arm/boot/dts/uniphier-pro5.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro5.dtsi
@@ -453,6 +453,154 @@
                        };
                };
 
+               usb0: usb@65a00000 {
+                       compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+                       status = "disabled";
+                       reg = <0x65a00000 0xcd00>;
+                       interrupt-names = "host";
+                       interrupts = <0 134 4>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&pinctrl_usb0>;
+                       clock-names = "ref", "bus_early", "suspend";
+                       clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+                       resets = <&usb0_rst 15>;
+                       phys = <&usb0_hsphy0>, <&usb0_ssphy0>;
+                       dr_mode = "host";
+               };
+
+               usb-glue@65b00000 {
+                       compatible = "socionext,uniphier-pro5-dwc3-glue",
+                                    "simple-mfd";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges = <0 0x65b00000 0x400>;
+
+                       usb0_rst: reset@0 {
+                               compatible = "socionext,uniphier-pro5-usb3-reset";
+                               reg = <0x0 0x4>;
+                               #reset-cells = <1>;
+                               clock-names = "gio", "link";
+                               clocks = <&sys_clk 12>, <&sys_clk 14>;
+                               reset-names = "gio", "link";
+                               resets = <&sys_rst 12>, <&sys_rst 14>;
+                       };
+
+                       usb0_vbus0: regulator@100 {
+                               compatible = "socionext,uniphier-pro5-usb3-regulator";
+                               reg = <0x100 0x10>;
+                               clock-names = "gio", "link";
+                               clocks = <&sys_clk 12>, <&sys_clk 14>;
+                               reset-names = "gio", "link";
+                               resets = <&sys_rst 12>, <&sys_rst 14>;
+                       };
+
+                       usb0_hsphy0: hs-phy@280 {
+                               compatible = "socionext,uniphier-pro5-usb3-hsphy";
+                               reg = <0x280 0x10>;
+                               #phy-cells = <0>;
+                               clock-names = "gio", "link";
+                               clocks = <&sys_clk 12>, <&sys_clk 14>;
+                               reset-names = "gio", "link";
+                               resets = <&sys_rst 12>, <&sys_rst 14>;
+                               vbus-supply = <&usb0_vbus0>;
+                       };
+
+                       usb0_ssphy0: ss-phy@380 {
+                               compatible = "socionext,uniphier-pro5-usb3-ssphy";
+                               reg = <0x380 0x10>;
+                               #phy-cells = <0>;
+                               clock-names = "gio", "link";
+                               clocks = <&sys_clk 12>, <&sys_clk 14>;
+                               reset-names = "gio", "link";
+                               resets = <&sys_rst 12>, <&sys_rst 14>;
+                               vbus-supply = <&usb0_vbus0>;
+                       };
+               };
+
+               usb1: usb@65c00000 {
+                       compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+                       status = "disabled";
+                       reg = <0x65c00000 0xcd00>;
+                       interrupt-names = "host";
+                       interrupts = <0 137 4>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb2>;
+                       clock-names = "ref", "bus_early", "suspend";
+                       clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+                       resets = <&usb1_rst 15>;
+                       phys = <&usb1_hsphy0>, <&usb1_hsphy1>, <&usb1_ssphy0>;
+                       dr_mode = "host";
+               };
+
+               usb-glue@65d00000 {
+                       compatible = "socionext,uniphier-pro5-dwc3-glue",
+                                    "simple-mfd";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges = <0 0x65d00000 0x400>;
+
+                       usb1_rst: reset@0 {
+                               compatible = "socionext,uniphier-pro5-usb3-reset";
+                               reg = <0x0 0x4>;
+                               #reset-cells = <1>;
+                               clock-names = "gio", "link";
+                               clocks = <&sys_clk 12>, <&sys_clk 15>;
+                               reset-names = "gio", "link";
+                               resets = <&sys_rst 12>, <&sys_rst 15>;
+                       };
+
+                       usb1_vbus0: regulator@100 {
+                               compatible = "socionext,uniphier-pro5-usb3-regulator";
+                               reg = <0x100 0x10>;
+                               clock-names = "gio", "link";
+                               clocks = <&sys_clk 12>, <&sys_clk 15>;
+                               reset-names = "gio", "link";
+                               resets = <&sys_rst 12>, <&sys_rst 15>;
+                       };
+
+                       usb1_vbus1: regulator@110 {
+                               compatible = "socionext,uniphier-pro5-usb3-regulator";
+                               reg = <0x110 0x10>;
+                               clock-names = "gio", "link";
+                               clocks = <&sys_clk 12>, <&sys_clk 15>;
+                               reset-names = "gio", "link";
+                               resets = <&sys_rst 12>, <&sys_rst 15>;
+                       };
+
+                       usb1_hsphy0: hs-phy@280 {
+                               compatible = "socionext,uniphier-pro5-usb3-hsphy";
+                               reg = <0x280 0x10>;
+                               #phy-cells = <0>;
+                               clock-names = "gio", "link";
+                               clocks = <&sys_clk 12>, <&sys_clk 15>;
+                               reset-names = "gio", "link";
+                               resets = <&sys_rst 12>, <&sys_rst 15>;
+                               vbus-supply = <&usb1_vbus0>;
+                       };
+
+                       usb1_hsphy1: hs-phy@290 {
+                               compatible = "socionext,uniphier-pro5-usb3-hsphy";
+                               reg = <0x290 0x10>;
+                               #phy-cells = <0>;
+                               clock-names = "gio", "link";
+                               clocks = <&sys_clk 12>, <&sys_clk 15>;
+                               reset-names = "gio", "link";
+                               resets = <&sys_rst 12>, <&sys_rst 15>;
+                               vbus-supply = <&usb1_vbus1>;
+                       };
+
+                       usb1_ssphy0: ss-phy@380 {
+                               compatible = "socionext,uniphier-pro5-usb3-ssphy";
+                               reg = <0x380 0x10>;
+                               #phy-cells = <0>;
+                               clock-names = "gio", "link";
+                               clocks = <&sys_clk 12>, <&sys_clk 15>;
+                               reset-names = "gio", "link";
+                               resets = <&sys_rst 12>, <&sys_rst 15>;
+                               vbus-supply = <&usb1_vbus0>;
+                       };
+               };
+
                nand: nand-controller@68000000 {
                        compatible = "socionext,uniphier-denali-nand-v5b";
                        status = "disabled";