The rate of the stream does not matter for the fifos of the axg family.
Fifos will just push or pull data to/from the DDR according to consumption
or production of the downstream element, which is the DPCM backend.
Drop the rate list and allow continuous rates. The lower and upper rate are
set according what is known to work with the different backends
This allows the PDM input backend to also use continuous rates.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://msgid.link/r/20240223175116.2005407-6-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
struct snd_soc_pcm_runtime;
#define AXG_FIFO_CH_MAX 128
-#define AXG_FIFO_RATES (SNDRV_PCM_RATE_5512 | \
- SNDRV_PCM_RATE_8000_384000)
#define AXG_FIFO_FORMATS (SNDRV_PCM_FMTBIT_S8 | \
SNDRV_PCM_FMTBIT_S16_LE | \
SNDRV_PCM_FMTBIT_S20_LE | \
.stream_name = "Playback",
.channels_min = 1,
.channels_max = AXG_FIFO_CH_MAX,
- .rates = AXG_FIFO_RATES,
+ .rates = SNDRV_PCM_RATE_CONTINUOUS,
+ .rate_min = 5515,
+ .rate_max = 384000,
.formats = AXG_FIFO_FORMATS,
},
.ops = &axg_frddr_ops,
.stream_name = "Playback",
.channels_min = 1,
.channels_max = AXG_FIFO_CH_MAX,
- .rates = AXG_FIFO_RATES,
+ .rates = SNDRV_PCM_RATE_CONTINUOUS,
+ .rate_min = 5515,
+ .rate_max = 384000,
.formats = AXG_FIFO_FORMATS,
},
.ops = &g12a_frddr_ops,
.stream_name = "Capture",
.channels_min = 1,
.channels_max = AXG_FIFO_CH_MAX,
- .rates = AXG_FIFO_RATES,
+ .rates = SNDRV_PCM_RATE_CONTINUOUS,
+ .rate_min = 5515,
+ .rate_max = 384000,
.formats = AXG_FIFO_FORMATS,
},
.ops = &axg_toddr_ops,
.stream_name = "Capture",
.channels_min = 1,
.channels_max = AXG_FIFO_CH_MAX,
- .rates = AXG_FIFO_RATES,
+ .rates = SNDRV_PCM_RATE_CONTINUOUS,
+ .rate_min = 5515,
+ .rate_max = 384000,
.formats = AXG_FIFO_FORMATS,
},
.ops = &g12a_toddr_ops,