arm64: dts: ti: k3-j784s4-evm: Correct Pin mux offset for ADC

After splitting wkup_pmx pin mux for J784S4 into four regions.
Pin mux offset for ADC nodes were not updated to align with new
regions, due to this while probing ADC driver out of range
error was seen.

Pin mux offsets for ADC nodes are corrected in this patch.

Fixes: 14462bd0b247 ("arm64: dts: ti: k3-j784s4: Fix wakeup pinmux range and pinctrl node offsets")
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Vaishnav Achath <vaishnav.a@ti.com>
Link: https://lore.kernel.org/r/20230809050108.751164-1-u-kumar1@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>

diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
index edc1009b2d1ee8808c67bfd7ed688b3508aac8b1..b4ffa720209c3a376a103d20bf5801c08f370a12 100644 (file)
--- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
@@ -340,27 +340,27 @@
 
        mcu_adc0_pins_default: mcu-adc0-default-pins {
                pinctrl-single,pins = <
-                       J784S4_WKUP_IOPAD(0x134, PIN_INPUT, 0) /* (P36) MCU_ADC0_AIN0 */
-                       J784S4_WKUP_IOPAD(0x138, PIN_INPUT, 0) /* (V36) MCU_ADC0_AIN1 */
-                       J784S4_WKUP_IOPAD(0x13c, PIN_INPUT, 0) /* (T34) MCU_ADC0_AIN2 */
-                       J784S4_WKUP_IOPAD(0x140, PIN_INPUT, 0) /* (T36) MCU_ADC0_AIN3 */
-                       J784S4_WKUP_IOPAD(0x144, PIN_INPUT, 0) /* (P34) MCU_ADC0_AIN4 */
-                       J784S4_WKUP_IOPAD(0x148, PIN_INPUT, 0) /* (R37) MCU_ADC0_AIN5 */
-                       J784S4_WKUP_IOPAD(0x14c, PIN_INPUT, 0) /* (R33) MCU_ADC0_AIN6 */
-                       J784S4_WKUP_IOPAD(0x150, PIN_INPUT, 0) /* (V38) MCU_ADC0_AIN7 */
+                       J784S4_WKUP_IOPAD(0x0cc, PIN_INPUT, 0) /* (P36) MCU_ADC0_AIN0 */
+                       J784S4_WKUP_IOPAD(0x0d0, PIN_INPUT, 0) /* (V36) MCU_ADC0_AIN1 */
+                       J784S4_WKUP_IOPAD(0x0d4, PIN_INPUT, 0) /* (T34) MCU_ADC0_AIN2 */
+                       J784S4_WKUP_IOPAD(0x0d8, PIN_INPUT, 0) /* (T36) MCU_ADC0_AIN3 */
+                       J784S4_WKUP_IOPAD(0x0dc, PIN_INPUT, 0) /* (P34) MCU_ADC0_AIN4 */
+                       J784S4_WKUP_IOPAD(0x0e0, PIN_INPUT, 0) /* (R37) MCU_ADC0_AIN5 */
+                       J784S4_WKUP_IOPAD(0x0e4, PIN_INPUT, 0) /* (R33) MCU_ADC0_AIN6 */
+                       J784S4_WKUP_IOPAD(0x0e8, PIN_INPUT, 0) /* (V38) MCU_ADC0_AIN7 */
                >;
        };
 
        mcu_adc1_pins_default: mcu-adc1-default-pins {
                pinctrl-single,pins = <
-                       J784S4_WKUP_IOPAD(0x154, PIN_INPUT, 0) /* (Y38) MCU_ADC1_AIN0 */
-                       J784S4_WKUP_IOPAD(0x158, PIN_INPUT, 0) /* (Y34) MCU_ADC1_AIN1 */
-                       J784S4_WKUP_IOPAD(0x15c, PIN_INPUT, 0) /* (V34) MCU_ADC1_AIN2 */
-                       J784S4_WKUP_IOPAD(0x160, PIN_INPUT, 0) /* (W37) MCU_ADC1_AIN3 */
-                       J784S4_WKUP_IOPAD(0x164, PIN_INPUT, 0) /* (AA37) MCU_ADC1_AIN4 */
-                       J784S4_WKUP_IOPAD(0x168, PIN_INPUT, 0) /* (W33) MCU_ADC1_AIN5 */
-                       J784S4_WKUP_IOPAD(0x16c, PIN_INPUT, 0) /* (U33) MCU_ADC1_AIN6 */
-                       J784S4_WKUP_IOPAD(0x170, PIN_INPUT, 0) /* (Y36) MCU_ADC1_AIN7 */
+                       J784S4_WKUP_IOPAD(0x0ec, PIN_INPUT, 0) /* (Y38) MCU_ADC1_AIN0 */
+                       J784S4_WKUP_IOPAD(0x0f0, PIN_INPUT, 0) /* (Y34) MCU_ADC1_AIN1 */
+                       J784S4_WKUP_IOPAD(0x0f4, PIN_INPUT, 0) /* (V34) MCU_ADC1_AIN2 */
+                       J784S4_WKUP_IOPAD(0x0f8, PIN_INPUT, 0) /* (W37) MCU_ADC1_AIN3 */
+                       J784S4_WKUP_IOPAD(0x0fc, PIN_INPUT, 0) /* (AA37) MCU_ADC1_AIN4 */
+                       J784S4_WKUP_IOPAD(0x100, PIN_INPUT, 0) /* (W33) MCU_ADC1_AIN5 */
+                       J784S4_WKUP_IOPAD(0x104, PIN_INPUT, 0) /* (U33) MCU_ADC1_AIN6 */
+                       J784S4_WKUP_IOPAD(0x108, PIN_INPUT, 0) /* (Y36) MCU_ADC1_AIN7 */
                >;
        };
 };