+++ /dev/null
-/*
- * Generic MIPI DPI Panel Driver
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#include <linux/gpio/consumer.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/of.h>
-#include <linux/regulator/consumer.h>
-#include <linux/backlight.h>
-
-#include <video/of_display_timing.h>
-
-#include "../dss/omapdss.h"
-
-struct panel_drv_data {
- struct omap_dss_device dssdev;
-
- struct videomode vm;
-
- struct backlight_device *backlight;
-
- struct gpio_desc *enable_gpio;
- struct regulator *vcc_supply;
-};
-
-#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
-
-static int panel_dpi_connect(struct omap_dss_device *src,
- struct omap_dss_device *dst)
-{
- return 0;
-}
-
-static void panel_dpi_disconnect(struct omap_dss_device *src,
- struct omap_dss_device *dst)
-{
-}
-
-static void panel_dpi_enable(struct omap_dss_device *dssdev)
-{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
- int r;
-
- r = regulator_enable(ddata->vcc_supply);
- if (r)
- return;
-
- gpiod_set_value_cansleep(ddata->enable_gpio, 1);
- backlight_enable(ddata->backlight);
-}
-
-static void panel_dpi_disable(struct omap_dss_device *dssdev)
-{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
-
- backlight_disable(ddata->backlight);
-
- gpiod_set_value_cansleep(ddata->enable_gpio, 0);
- regulator_disable(ddata->vcc_supply);
-}
-
-static int panel_dpi_get_modes(struct omap_dss_device *dssdev,
- struct drm_connector *connector)
-{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
-
- return omapdss_display_get_modes(connector, &ddata->vm);
-}
-
-static const struct omap_dss_device_ops panel_dpi_ops = {
- .connect = panel_dpi_connect,
- .disconnect = panel_dpi_disconnect,
-
- .enable = panel_dpi_enable,
- .disable = panel_dpi_disable,
-
- .get_modes = panel_dpi_get_modes,
-};
-
-static int panel_dpi_probe_of(struct platform_device *pdev)
-{
- struct panel_drv_data *ddata = platform_get_drvdata(pdev);
- struct device_node *node = pdev->dev.of_node;
- int r;
- struct display_timing timing;
- struct gpio_desc *gpio;
-
- gpio = devm_gpiod_get_optional(&pdev->dev, "enable", GPIOD_OUT_LOW);
- if (IS_ERR(gpio))
- return PTR_ERR(gpio);
-
- ddata->enable_gpio = gpio;
-
- /*
- * Many different panels are supported by this driver and there are
- * probably very different needs for their reset pins in regards to
- * timing and order relative to the enable gpio. So for now it's just
- * ensured that the reset line isn't active.
- */
- gpio = devm_gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW);
- if (IS_ERR(gpio))
- return PTR_ERR(gpio);
-
- ddata->vcc_supply = devm_regulator_get(&pdev->dev, "vcc");
- if (IS_ERR(ddata->vcc_supply))
- return PTR_ERR(ddata->vcc_supply);
-
- ddata->backlight = devm_of_find_backlight(&pdev->dev);
-
- if (IS_ERR(ddata->backlight))
- return PTR_ERR(ddata->backlight);
-
- r = of_get_display_timing(node, "panel-timing", &timing);
- if (r) {
- dev_err(&pdev->dev, "failed to get video timing\n");
- return r;
- }
-
- videomode_from_timing(&timing, &ddata->vm);
-
- return 0;
-}
-
-static int panel_dpi_probe(struct platform_device *pdev)
-{
- struct panel_drv_data *ddata;
- struct omap_dss_device *dssdev;
- int r;
-
- ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
- if (ddata == NULL)
- return -ENOMEM;
-
- platform_set_drvdata(pdev, ddata);
-
- r = panel_dpi_probe_of(pdev);
- if (r)
- return r;
-
- dssdev = &ddata->dssdev;
- dssdev->dev = &pdev->dev;
- dssdev->ops = &panel_dpi_ops;
- dssdev->type = OMAP_DISPLAY_TYPE_DPI;
- dssdev->display = true;
- dssdev->owner = THIS_MODULE;
- dssdev->of_ports = BIT(0);
- dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
- drm_bus_flags_from_videomode(&ddata->vm, &dssdev->bus_flags);
-
- omapdss_display_init(dssdev);
- omapdss_device_register(dssdev);
-
- return 0;
-}
-
-static int __exit panel_dpi_remove(struct platform_device *pdev)
-{
- struct panel_drv_data *ddata = platform_get_drvdata(pdev);
- struct omap_dss_device *dssdev = &ddata->dssdev;
-
- omapdss_device_unregister(dssdev);
-
- if (omapdss_device_is_enabled(dssdev))
- panel_dpi_disable(dssdev);
-
- return 0;
-}
-
-static const struct of_device_id panel_dpi_of_match[] = {
- { .compatible = "omapdss,panel-dpi", },
- {},
-};
-
-MODULE_DEVICE_TABLE(of, panel_dpi_of_match);
-
-static struct platform_driver panel_dpi_driver = {
- .probe = panel_dpi_probe,
- .remove = __exit_p(panel_dpi_remove),
- .driver = {
- .name = "panel-dpi",
- .of_match_table = panel_dpi_of_match,
- .suppress_bind_attrs = true,
- },
-};
-
-module_platform_driver(panel_dpi_driver);
-
-MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
-MODULE_DESCRIPTION("Generic MIPI DPI Panel Driver");
-MODULE_LICENSE("GPL");
projects / linux.git / commitdiff